diff --git a/hardware/Common_Rail_MC33816/Common_Rail_MC33816.sch b/hardware/Common_Rail_MC33816/Common_Rail_MC33816.sch index 369793ea1e..db301f3d46 100644 --- a/hardware/Common_Rail_MC33816/Common_Rail_MC33816.sch +++ b/hardware/Common_Rail_MC33816/Common_Rail_MC33816.sch @@ -24,6 +24,7 @@ F 3 "" H 7325 3975 60 0001 C CNN F 4 "ST,STPS2H100UY" V 3805 3950 60 0001 C CNN "MFG,MFG#" F 5 "DIGI,497-11093-1-ND" V 3805 3950 60 0001 C CNN "VEND1,VEND1#" F 6 "," H 7325 3975 60 0001 C CNN "VEND2,VEND2#" +F 7 "C157420" H 5025 6475 50 0001 C CNN "LCSC" 1 5025 6475 0 -1 1 0 $EndComp @@ -53,6 +54,7 @@ F 3 "" H 7325 3975 60 0001 C CNN F 4 "Nexperia,BUK9230-100B" V 3805 3950 60 0001 C CNN "MFG,MFG#" F 5 "DIGI,1727-4708-1-ND" V 3805 3950 60 0001 C CNN "VEND1,VEND1#" F 6 "," H 7325 3975 60 0001 C CNN "VEND2,VEND2#" +F 7 "C194346" H 10675 3100 50 0001 C CNN "LCSC" 1 10675 3100 1 0 0 -1 $EndComp @@ -67,6 +69,7 @@ F 3 "" H 7325 3975 60 0001 C CNN F 4 "Nexperia,BUK9230-100B" V 3805 3950 60 0001 C CNN "MFG,MFG#" F 5 "DIGI,1727-4708-1-ND" V 3805 3950 60 0001 C CNN "VEND1,VEND1#" F 6 "," H 7325 3975 60 0001 C CNN "VEND2,VEND2#" +F 7 "C194346" H 11975 2575 50 0001 C CNN "LCSC" 1 11975 2575 1 0 0 -1 $EndComp @@ -219,6 +222,7 @@ F 3 "" H 7325 3975 60 0001 C CNN F 4 "ST,STPS2H100UY" V 3805 3950 60 0001 C CNN "MFG,MFG#" F 5 "DIGI,497-11093-1-ND" V 3805 3950 60 0001 C CNN "VEND1,VEND1#" F 6 "," H 7325 3975 60 0001 C CNN "VEND2,VEND2#" +F 7 "C157420" H 11000 3900 50 0001 C CNN "LCSC" 1 11000 3900 0 1 1 0 $EndComp @@ -235,6 +239,7 @@ F 3 "" H 7325 3975 60 0001 C CNN F 4 "Nexperia,BUK9230-100B" V 3805 3950 60 0001 C CNN "MFG,MFG#" F 5 "DIGI,1727-4708-1-ND" V 3805 3950 60 0001 C CNN "VEND1,VEND1#" F 6 "," H 7325 3975 60 0001 C CNN "VEND2,VEND2#" +F 7 "C194346" H 10675 4300 50 0001 C CNN "LCSC" 1 10675 4300 1 0 0 -1 $EndComp @@ -331,6 +336,7 @@ F 3 "" H 7325 3975 60 0001 C CNN F 4 "ST,STPS2H100UY" V 3805 3950 60 0001 C CNN "MFG,MFG#" F 5 "DIGI,497-11093-1-ND" V 3805 3950 60 0001 C CNN "VEND1,VEND1#" F 6 "," H 7325 3975 60 0001 C CNN "VEND2,VEND2#" +F 7 "C157420" H 12300 4450 50 0001 C CNN "LCSC" 1 12300 4450 0 -1 1 0 $EndComp @@ -347,6 +353,7 @@ F 3 "" H 7325 3975 60 0001 C CNN F 4 "Nexperia,BUK9230-100B" V 3805 3950 60 0001 C CNN "MFG,MFG#" F 5 "DIGI,1727-4708-1-ND" V 3805 3950 60 0001 C CNN "VEND1,VEND1#" F 6 "," H 7325 3975 60 0001 C CNN "VEND2,VEND2#" +F 7 "C194346" H 11975 4850 50 0001 C CNN "LCSC" 1 11975 4850 1 0 0 -1 $EndComp @@ -447,6 +454,7 @@ F 3 "" H 7325 3975 60 0001 C CNN F 4 "Nexperia,BUK9230-100B" V 3805 3950 60 0001 C CNN "MFG,MFG#" F 5 "DIGI,1727-4708-1-ND" V 3805 3950 60 0001 C CNN "VEND1,VEND1#" F 6 "," H 7325 3975 60 0001 C CNN "VEND2,VEND2#" +F 7 "C194346" H 5975 6000 50 0001 C CNN "LCSC" 1 5975 6000 -1 0 0 -1 $EndComp @@ -461,6 +469,7 @@ F 3 "" H 7325 3975 60 0001 C CNN F 4 "Nexperia,BUK9230-100B" V 3805 3950 60 0001 C CNN "MFG,MFG#" F 5 "DIGI,1727-4708-1-ND" V 3805 3950 60 0001 C CNN "VEND1,VEND1#" F 6 "," H 7325 3975 60 0001 C CNN "VEND2,VEND2#" +F 7 "C194346" H 10750 6650 50 0001 C CNN "LCSC" 1 10750 6650 1 0 0 -1 $EndComp @@ -607,6 +616,7 @@ F 3 "" H 7325 3975 60 0001 C CNN F 4 "KEMET,C0805C224M1RACTU" V 3805 3950 60 0001 C CNN "MFG,MFG#" F 5 "DIGI,399-9205-1-ND" V 3805 3950 60 0001 C CNN "VEND1,VEND1#" F 6 "," H 7325 3975 60 0001 C CNN "VEND2,VEND2#" +F 7 "" H 11975 7125 50 0001 C CNN "LCSC" 1 11975 7125 1 0 0 -1 $EndComp @@ -621,6 +631,7 @@ F 3 "" H 7325 3975 60 0001 C CNN F 4 "KEMET,C0805C224M1RACTU" V 3805 3950 60 0001 C CNN "MFG,MFG#" F 5 "DIGI,399-9205-1-ND" V 3805 3950 60 0001 C CNN "VEND1,VEND1#" F 6 "," H 7325 3975 60 0001 C CNN "VEND2,VEND2#" +F 7 "" H 12375 7125 50 0001 C CNN "LCSC" 1 12375 7125 1 0 0 -1 $EndComp @@ -677,6 +688,7 @@ F 3 "" H 7325 3975 60 0001 C CNN F 4 "KEMET,C0805C224M1RACTU" V 3805 3950 60 0001 C CNN "MFG,MFG#" F 5 "DIGI,399-9205-1-ND" V 3805 3950 60 0001 C CNN "VEND1,VEND1#" F 6 "," H 7325 3975 60 0001 C CNN "VEND2,VEND2#" +F 7 "C5378" H 10600 6200 50 0001 C CNN "LCSC" 1 10600 6200 -1 0 0 -1 $EndComp @@ -713,6 +725,7 @@ F 3 "" H 7325 3975 60 0001 C CNN F 4 "KEMET,C0805C224M1RACTU" V 3805 3950 60 0001 C CNN "MFG,MFG#" F 5 "DIGI,399-9205-1-ND" V 3805 3950 60 0001 C CNN "VEND1,VEND1#" F 6 "," H 7325 3975 60 0001 C CNN "VEND2,VEND2#" +F 7 "C5378" H 9900 6200 50 0001 C CNN "LCSC" 1 9900 6200 1 0 0 -1 $EndComp @@ -783,6 +796,7 @@ F 3 "" H 7325 3975 60 0001 C CNN F 4 "Nexperia,BUK9230-100B" V 3805 3950 60 0001 C CNN "MFG,MFG#" F 5 "DIGI,1727-4708-1-ND" V 3805 3950 60 0001 C CNN "VEND1,VEND1#" F 6 "," H 7325 3975 60 0001 C CNN "VEND2,VEND2#" +F 7 "C194346" H 5975 7000 50 0001 C CNN "LCSC" 1 5975 7000 -1 0 0 -1 $EndComp @@ -883,6 +897,7 @@ F 3 "" H 7325 3975 60 0001 C CNN F 4 "ST,STPS2H100UY" V 3805 3950 60 0001 C CNN "MFG,MFG#" F 5 "DIGI,497-11093-1-ND" V 3805 3950 60 0001 C CNN "VEND1,VEND1#" F 6 "," H 7325 3975 60 0001 C CNN "VEND2,VEND2#" +F 7 "C157420" H 5350 6400 50 0001 C CNN "LCSC" 1 5350 6400 0 1 1 0 $EndComp @@ -1447,6 +1462,7 @@ F 3 "" H 7325 3975 60 0001 C CNN F 4 "Nexperia,BUK9230-100B" V 3805 3950 60 0001 C CNN "MFG,MFG#" F 5 "DIGI,1727-4708-1-ND" V 3805 3950 60 0001 C CNN "VEND1,VEND1#" F 6 "," H 7325 3975 60 0001 C CNN "VEND2,VEND2#" +F 7 "C194346" H 5875 3100 50 0001 C CNN "LCSC" 1 5875 3100 -1 0 0 -1 $EndComp @@ -1461,6 +1477,7 @@ F 3 "" H 7325 3975 60 0001 C CNN F 4 "Nexperia,BUK9230-100B" V 3805 3950 60 0001 C CNN "MFG,MFG#" F 5 "DIGI,1727-4708-1-ND" V 3805 3950 60 0001 C CNN "VEND1,VEND1#" F 6 "," H 7325 3975 60 0001 C CNN "VEND2,VEND2#" +F 7 "C194346" H 4575 2575 50 0001 C CNN "LCSC" 1 4575 2575 -1 0 0 -1 $EndComp @@ -1602,6 +1619,7 @@ F 3 "" H 7325 3975 60 0001 C CNN F 4 "ST,STPS2H100UY" V 3805 3950 60 0001 C CNN "MFG,MFG#" F 5 "DIGI,497-11093-1-ND" V 3805 3950 60 0001 C CNN "VEND1,VEND1#" F 6 "," H 7325 3975 60 0001 C CNN "VEND2,VEND2#" +F 7 "C157420" H 5550 3900 50 0001 C CNN "LCSC" 1 5550 3900 0 -1 1 0 $EndComp @@ -1618,6 +1636,7 @@ F 3 "" H 7325 3975 60 0001 C CNN F 4 "Nexperia,BUK9230-100B" V 3805 3950 60 0001 C CNN "MFG,MFG#" F 5 "DIGI,1727-4708-1-ND" V 3805 3950 60 0001 C CNN "VEND1,VEND1#" F 6 "," H 7325 3975 60 0001 C CNN "VEND2,VEND2#" +F 7 "C194346" H 5875 4300 50 0001 C CNN "LCSC" 1 5875 4300 -1 0 0 -1 $EndComp @@ -1716,6 +1735,7 @@ F 3 "" H 7325 3975 60 0001 C CNN F 4 "Nexperia,BUK9230-100B" V 3805 3950 60 0001 C CNN "MFG,MFG#" F 5 "DIGI,1727-4708-1-ND" V 3805 3950 60 0001 C CNN "VEND1,VEND1#" F 6 "," H 7325 3975 60 0001 C CNN "VEND2,VEND2#" +F 7 "C194346" H 4575 4850 50 0001 C CNN "LCSC" 1 4575 4850 -1 0 0 -1 $EndComp @@ -2071,6 +2091,7 @@ F 3 "" H 12525 3500 50 0001 C CNN F 4 "Diodes,SBR10200CTL-13" H 12525 3500 60 0001 C CNN "MFG,MFG#" F 5 "DIGI,SBR10200CTL-13DICT-ND" H 12525 3500 60 0001 C CNN "VEND1,VEND1#" F 6 "," H 12525 3500 60 0001 C CNN "VEND2,VEND2#" +F 7 "C135494" H 12525 3500 50 0001 C CNN "LCSC" 1 12525 3500 0 1 -1 0 $EndComp @@ -2085,6 +2106,7 @@ F 3 "" H 3950 3500 50 0001 C CNN F 4 "Diodes,SBR10200CTL-13" H 3950 3500 60 0001 C CNN "MFG,MFG#" F 5 "DIGI,SBR10200CTL-13DICT-ND" H 3950 3500 60 0001 C CNN "VEND1,VEND1#" F 6 "," H 3950 3500 60 0001 C CNN "VEND2,VEND2#" +F 7 "C135494" H 3950 3500 50 0001 C CNN "LCSC" 1 3950 3500 0 -1 -1 0 $EndComp @@ -2729,6 +2751,7 @@ F 3 "" H 7325 3975 60 0001 C CNN F 4 "ST,STPS2H100UY" V 3805 3950 60 0001 C CNN "MFG,MFG#" F 5 "DIGI,497-11093-1-ND" V 3805 3950 60 0001 C CNN "VEND1,VEND1#" F 6 "," H 7325 3975 60 0001 C CNN "VEND2,VEND2#" +F 7 "C157420" H 4250 4450 50 0001 C CNN "LCSC" 1 4250 4450 0 1 1 0 $EndComp @@ -3083,6 +3106,7 @@ F 3 "" H 13000 2325 60 0001 C CNN F 4 " , " V 9480 2300 60 0001 C CNN "MFG,MFG#" F 5 " , " V 9480 2300 60 0001 C CNN "VEND1,VEND1#" F 6 "," H 13000 2325 60 0001 C CNN "VEND2,VEND2#" +F 7 "C17513" H 10700 925 50 0001 C CNN "LCSC" 1 10700 925 0 1 1 0 $EndComp @@ -3113,6 +3137,7 @@ F 3 "" H 13000 2225 60 0001 C CNN F 4 " , " V 9480 2200 60 0001 C CNN "MFG,MFG#" F 5 " , " V 9480 2200 60 0001 C CNN "VEND1,VEND1#" F 6 "," H 13000 2225 60 0001 C CNN "VEND2,VEND2#" +F 7 "C17513" H 10700 825 50 0001 C CNN "LCSC" 1 10700 825 0 1 1 0 $EndComp @@ -3143,6 +3168,7 @@ F 3 "" H 13000 2425 60 0001 C CNN F 4 " , " V 9480 2400 60 0001 C CNN "MFG,MFG#" F 5 " , " V 9480 2400 60 0001 C CNN "VEND1,VEND1#" F 6 "," H 13000 2425 60 0001 C CNN "VEND2,VEND2#" +F 7 "C17513" H 10700 1025 50 0001 C CNN "LCSC" 1 10700 1025 0 1 1 0 $EndComp @@ -3173,6 +3199,7 @@ F 3 "" H 13000 2625 60 0001 C CNN F 4 " , " V 9480 2600 60 0001 C CNN "MFG,MFG#" F 5 " , " V 9480 2600 60 0001 C CNN "VEND1,VEND1#" F 6 "," H 13000 2625 60 0001 C CNN "VEND2,VEND2#" +F 7 "C17513" H 10700 1225 50 0001 C CNN "LCSC" 1 10700 1225 0 1 1 0 $EndComp @@ -3203,6 +3230,7 @@ F 3 "" H 8100 2225 60 0001 C CNN F 4 " , " V 4580 2200 60 0001 C CNN "MFG,MFG#" F 5 " , " V 4580 2200 60 0001 C CNN "VEND1,VEND1#" F 6 "," H 8100 2225 60 0001 C CNN "VEND2,VEND2#" +F 7 "C17513" H 5800 825 50 0001 C CNN "LCSC" 1 5800 825 0 -1 1 0 $EndComp @@ -3233,6 +3261,7 @@ F 3 "" H 8100 2125 60 0001 C CNN F 4 " , " V 4580 2100 60 0001 C CNN "MFG,MFG#" F 5 " , " V 4580 2100 60 0001 C CNN "VEND1,VEND1#" F 6 "," H 8100 2125 60 0001 C CNN "VEND2,VEND2#" +F 7 "C17513" H 5800 725 50 0001 C CNN "LCSC" 1 5800 725 0 -1 1 0 $EndComp @@ -3263,6 +3292,7 @@ F 3 "" H 8100 2425 60 0001 C CNN F 4 " , " V 4580 2400 60 0001 C CNN "MFG,MFG#" F 5 " , " V 4580 2400 60 0001 C CNN "VEND1,VEND1#" F 6 "," H 8100 2425 60 0001 C CNN "VEND2,VEND2#" +F 7 "C17513" H 5800 1025 50 0001 C CNN "LCSC" 1 5800 1025 0 -1 1 0 $EndComp @@ -3293,6 +3323,7 @@ F 3 "" H 8100 2325 60 0001 C CNN F 4 " , " V 4580 2300 60 0001 C CNN "MFG,MFG#" F 5 " , " V 4580 2300 60 0001 C CNN "VEND1,VEND1#" F 6 "," H 8100 2325 60 0001 C CNN "VEND2,VEND2#" +F 7 "C17513" H 5800 925 50 0001 C CNN "LCSC" 1 5800 925 0 -1 1 0 $EndComp @@ -3323,6 +3354,7 @@ F 3 "" H 8100 2525 60 0001 C CNN F 4 " , " V 4580 2500 60 0001 C CNN "MFG,MFG#" F 5 " , " V 4580 2500 60 0001 C CNN "VEND1,VEND1#" F 6 "," H 8100 2525 60 0001 C CNN "VEND2,VEND2#" +F 7 "C17513" H 5800 1125 50 0001 C CNN "LCSC" 1 5800 1125 0 -1 1 0 $EndComp @@ -3353,6 +3385,7 @@ F 3 "" H 8100 2625 60 0001 C CNN F 4 " , " V 4580 2600 60 0001 C CNN "MFG,MFG#" F 5 " , " V 4580 2600 60 0001 C CNN "VEND1,VEND1#" F 6 "," H 8100 2625 60 0001 C CNN "VEND2,VEND2#" +F 7 "C17513" H 5800 1225 50 0001 C CNN "LCSC" 1 5800 1225 0 -1 1 0 $EndComp @@ -3383,6 +3416,7 @@ F 3 "" H 8100 2725 60 0001 C CNN F 4 " , " V 4580 2700 60 0001 C CNN "MFG,MFG#" F 5 " , " V 4580 2700 60 0001 C CNN "VEND1,VEND1#" F 6 "," H 8100 2725 60 0001 C CNN "VEND2,VEND2#" +F 7 "C17513" H 5800 1325 50 0001 C CNN "LCSC" 1 5800 1325 0 -1 1 0 $EndComp @@ -3413,6 +3447,7 @@ F 3 "" H 8100 2825 60 0001 C CNN F 4 " , " V 4580 2800 60 0001 C CNN "MFG,MFG#" F 5 " , " V 4580 2800 60 0001 C CNN "VEND1,VEND1#" F 6 "," H 8100 2825 60 0001 C CNN "VEND2,VEND2#" +F 7 "C17513" H 5800 1425 50 0001 C CNN "LCSC" 1 5800 1425 0 -1 1 0 $EndComp @@ -3443,6 +3478,7 @@ F 3 "" H 11125 2125 60 0001 C CNN F 4 " , " V 7605 2100 60 0001 C CNN "MFG,MFG#" F 5 " , " V 7605 2100 60 0001 C CNN "VEND1,VEND1#" F 6 "," H 11125 2125 60 0001 C CNN "VEND2,VEND2#" +F 7 "C17513" H 8825 725 50 0001 C CNN "LCSC" 1 8825 725 0 -1 1 0 $EndComp @@ -3482,6 +3518,7 @@ F 3 "" H 10000 2125 60 0001 C CNN F 4 " , " V 6480 2100 60 0001 C CNN "MFG,MFG#" F 5 " , " V 6480 2100 60 0001 C CNN "VEND1,VEND1#" F 6 "," H 10000 2125 60 0001 C CNN "VEND2,VEND2#" +F 7 "C17513" H 7700 725 50 0001 C CNN "LCSC" 1 7700 725 0 1 1 0 $EndComp @@ -3523,6 +3560,7 @@ F 3 "" H 11125 2225 60 0001 C CNN F 4 " , " V 7605 2200 60 0001 C CNN "MFG,MFG#" F 5 " , " V 7605 2200 60 0001 C CNN "VEND1,VEND1#" F 6 "," H 11125 2225 60 0001 C CNN "VEND2,VEND2#" +F 7 "C17513" H 8825 825 50 0001 C CNN "LCSC" 1 8825 825 0 -1 1 0 $EndComp @@ -3616,6 +3654,7 @@ F 3 "" H 11125 2325 60 0001 C CNN F 4 " , " V 7605 2300 60 0001 C CNN "MFG,MFG#" F 5 " , " V 7605 2300 60 0001 C CNN "VEND1,VEND1#" F 6 "," H 11125 2325 60 0001 C CNN "VEND2,VEND2#" +F 7 "C17513" H 8825 925 50 0001 C CNN "LCSC" 1 8825 925 0 -1 1 0 $EndComp @@ -3644,6 +3683,7 @@ F 3 "" H 11125 2425 60 0001 C CNN F 4 " , " V 7605 2400 60 0001 C CNN "MFG,MFG#" F 5 " , " V 7605 2400 60 0001 C CNN "VEND1,VEND1#" F 6 "," H 11125 2425 60 0001 C CNN "VEND2,VEND2#" +F 7 "C17513" H 8825 1025 50 0001 C CNN "LCSC" 1 8825 1025 0 -1 1 0 $EndComp @@ -3672,6 +3712,7 @@ F 3 "" H 11125 2525 60 0001 C CNN F 4 " , " V 7605 2500 60 0001 C CNN "MFG,MFG#" F 5 " , " V 7605 2500 60 0001 C CNN "VEND1,VEND1#" F 6 "," H 11125 2525 60 0001 C CNN "VEND2,VEND2#" +F 7 "C17513" H 8825 1125 50 0001 C CNN "LCSC" 1 8825 1125 0 -1 1 0 $EndComp @@ -3700,6 +3741,7 @@ F 3 "" H 11125 2625 60 0001 C CNN F 4 " , " V 7605 2600 60 0001 C CNN "MFG,MFG#" F 5 " , " V 7605 2600 60 0001 C CNN "VEND1,VEND1#" F 6 "," H 11125 2625 60 0001 C CNN "VEND2,VEND2#" +F 7 "C17513" H 8825 1225 50 0001 C CNN "LCSC" 1 8825 1225 0 -1 1 0 $EndComp @@ -3736,6 +3778,7 @@ F 3 "" H 15150 7250 60 0001 C CNN F 4 " , " V 11630 7225 60 0001 C CNN "MFG,MFG#" F 5 " , " V 11630 7225 60 0001 C CNN "VEND1,VEND1#" F 6 "," H 15150 7250 60 0001 C CNN "VEND2,VEND2#" +F 7 "C17513" H 12850 5850 50 0001 C CNN "LCSC" 1 12850 5850 0 1 1 0 $EndComp @@ -3881,6 +3924,7 @@ F 3 "" H 15300 2400 60 0001 C CNN F 4 " , " V 11780 2375 60 0001 C CNN "MFG,MFG#" F 5 " , " V 11780 2375 60 0001 C CNN "VEND1,VEND1#" F 6 "," H 15300 2400 60 0001 C CNN "VEND2,VEND2#" +F 7 "C17513" H 13000 1000 50 0001 C CNN "LCSC" 1 13000 1000 0 1 1 0 $EndComp @@ -3909,6 +3953,7 @@ F 3 "" H 15300 2125 60 0001 C CNN F 4 " , " V 11780 2100 60 0001 C CNN "MFG,MFG#" F 5 " , " V 11780 2100 60 0001 C CNN "VEND1,VEND1#" F 6 "," H 15300 2125 60 0001 C CNN "VEND2,VEND2#" +F 7 "C17513" H 13000 725 50 0001 C CNN "LCSC" 1 13000 725 0 1 1 0 $EndComp @@ -3948,6 +3993,7 @@ F 3 "" H 15300 2500 60 0001 C CNN F 4 " , " V 11780 2475 60 0001 C CNN "MFG,MFG#" F 5 " , " V 11780 2475 60 0001 C CNN "VEND1,VEND1#" F 6 "," H 15300 2500 60 0001 C CNN "VEND2,VEND2#" +F 7 "C17513" H 13000 1100 50 0001 C CNN "LCSC" 1 13000 1100 0 1 1 0 $EndComp diff --git a/hardware/Common_Rail_MC33816/Common_Rail_MC33816.xml b/hardware/Common_Rail_MC33816/Common_Rail_MC33816.xml index b648a7a7b3..c7842a81f3 100644 --- a/hardware/Common_Rail_MC33816/Common_Rail_MC33816.xml +++ b/hardware/Common_Rail_MC33816/Common_Rail_MC33816.xml @@ -1,15 +1,15 @@ - C:/Users/Vista_64_D630/Desktop/rusefi_direct/hardware/Common_Rail_MC33816/Common_Rail_MC33816.sch - 1/1/2020 6:46:48 AM - Eeschema 4.0.7 + C:\Users\Owner\Desktop\rusefi_GH_PLEASEdoNOTforget20\hardware\Common_Rail_MC33816\Common_Rail_MC33816.sch + 6/18/2020 9:41:11 PM + Eeschema (5.1.5)-3 Common Rail MC33816 rusEFI.com - 0.3 - 2019-08-12 + 0.3.2 + 2020-05-28 Common_Rail_MC33816.sch @@ -23,23 +23,25 @@ STPS2H100UY Diodes_SMD:D_SMB + C157420 ST,STPS2H100UY DIGI,497-11093-1-ND , - + 5A77A2A5 330pF - rusEFI_LIB:C_0805 + rusefi_lib:C_0805 + C51207 Kemet,C0805C331J1GACTU DIGI,399-1131-1-ND JLCPCB,C51207 - + 5A77A37C @@ -47,11 +49,12 @@ BUK9230-100B TO_SOT_Packages_SMD:TO-252-2Lead + C194346 Nexperia,BUK9230-100B DIGI,1727-4708-1-ND , - + 5A77A6E1 @@ -59,83 +62,90 @@ BUK9230-100B TO_SOT_Packages_SMD:TO-252-2Lead + C194346 Nexperia,BUK9230-100B DIGI,1727-4708-1-ND , - + 5A77A783 1000pF - rusEFI_LIB:C_0805 + rusefi_lib:C_0805 + C209838 avx,08051C102KAT2A DIGI,478-1352-1-ND JLCPCB,C209838 - + 5A77A828 1000pF - rusEFI_LIB:C_0805 + rusefi_lib:C_0805 + C209838 avx,08051C102KAT2A DIGI,478-1352-1-ND JLCPCB,C209838 - + 5A77A8A4 10R - rusEFI_LIB:R_0805 + rusefi_lib:R_0805 + C17403 Stackpole,RMCF0805JG10R0 DIGI,RMCF0805JG10R0CT-ND JLCPCB,C17403 - + 5A77A923 10R - rusEFI_LIB:R_0805 + rusefi_lib:R_0805 + C17403 Stackpole,RMCF0805JG10R0 DIGI,RMCF0805JG10R0CT-ND JLCPCB,C17403 - + 5A77A9C9 4700pF - rusEFI_LIB:C_0805 + rusefi_lib:C_0805 + C21217 TDK,C2012C0G2A472J125AA DIGI,445-2324-1-ND JLCPCB,C21217 - + 5A77AA58 4700pF - rusEFI_LIB:C_0805 + rusefi_lib:C_0805 + C21217 TDK,C2012C0G2A472J125AA DIGI,445-2324-1-ND JLCPCB,C21217 - + 5A77D4C5 @@ -143,11 +153,12 @@ STPS2H100UY Diodes_SMD:D_SMB + C157420 ST,STPS2H100UY DIGI,497-11093-1-ND , - + 5A77D4F7 @@ -155,59 +166,64 @@ BUK9230-100B TO_SOT_Packages_SMD:TO-252-2Lead + C194346 Nexperia,BUK9230-100B DIGI,1727-4708-1-ND , - + 5A77DD3F 10R - rusEFI_LIB:R_0805 + rusefi_lib:R_0805 + C17403 Stackpole,RMCF0805JG10R0 DIGI,RMCF0805JG10R0CT-ND JLCPCB,C17403 - + 5A77E115 1000pF - rusEFI_LIB:C_0805 + rusefi_lib:C_0805 + C209838 avx,08051C102KAT2A DIGI,478-1352-1-ND JLCPCB,C209838 - + 5A77E1AB 4700pF - rusEFI_LIB:C_0805 + rusefi_lib:C_0805 + C21217 TDK,C2012C0G2A472J125AA DIGI,445-2324-1-ND JLCPCB,C21217 - + 5A77E5DB 4700pF - rusEFI_LIB:C_0805 + rusefi_lib:C_0805 + C21217 TDK,C2012C0G2A472J125AA DIGI,445-2324-1-ND JLCPCB,C21217 - + 5A77E602 @@ -215,11 +231,12 @@ STPS2H100UY Diodes_SMD:D_SMB + C157420 ST,STPS2H100UY DIGI,497-11093-1-ND , - + 5A77E60E @@ -227,35 +244,38 @@ BUK9230-100B TO_SOT_Packages_SMD:TO-252-2Lead + C194346 Nexperia,BUK9230-100B DIGI,1727-4708-1-ND , - + 5A77E615 10R - rusEFI_LIB:R_0805 + rusefi_lib:R_0805 + C17403 Stackpole,RMCF0805JG10R0 DIGI,RMCF0805JG10R0CT-ND JLCPCB,C17403 - + 5A77E61B 1000pF - rusEFI_LIB:C_0805 + rusefi_lib:C_0805 + C209838 avx,08051C102KAT2A DIGI,478-1352-1-ND JLCPCB,C209838 - + 5A77E621 @@ -263,23 +283,24 @@ 0R015 Resistors_SMD:R_1206_HandSoldering + C201281 Panasonic,ERJ-8CWFR015V DIGI,P0.015BVCT-ND JLCPCB,C201281 - + 5A77E6E9 10uH - rusEFI_LIB:IHLP6767GZER100M01 + rusefi_lib:IHLP6767GZER100M01 Vishay,IHLP6767GZER100M01 DIGI,541-1259-1-ND , - + 5A781F25 @@ -291,7 +312,7 @@ DIGI,FFD10UP20SCT-ND , - + 5A78203B @@ -299,11 +320,12 @@ BUK9230-100B TO_SOT_Packages_SMD:TO-252-2Lead + C194346 Nexperia,BUK9230-100B DIGI,1727-4708-1-ND , - + 5A7823C9 @@ -311,95 +333,103 @@ BUK9230-100B TO_SOT_Packages_SMD:TO-252-2Lead + C194346 Nexperia,BUK9230-100B DIGI,1727-4708-1-ND , - + 5A7824B4 10R - rusEFI_LIB:R_0805 + rusefi_lib:R_0805 + C17403 Stackpole,RMCF0805JG10R0 DIGI,RMCF0805JG10R0CT-ND JLCPCB,C17403 - + 5A7826EE 470pF - rusEFI_LIB:C_0805 + rusefi_lib:C_0805 + C1743 TDK,CGA4C2C0G2A471J060AA DIGI,445-6953-1-ND JLCPCB,C1743 - + 5A7826F4 5.1R - rusEFI_LIB:R_0805 + rusefi_lib:R_0805 + C247080 Stackpole,RMCF0805JT5R10 DIGI,RMCF0805JT5R10CT-ND JLCPCB,C247080 - + 5A7828D9 330pF - rusEFI_LIB:C_0805 + rusefi_lib:C_0805 + C51207 Kemet,C0805C331J1GACTU DIGI,399-1131-1-ND JLCPCB,C51207 - + 5A782A0D 5.1R - rusEFI_LIB:R_0805 + rusefi_lib:R_0805 + C247080 Stackpole,RMCF0805JT5R10 DIGI,RMCF0805JT5R10CT-ND JLCPCB,C247080 - + 5A782C67 330pF - rusEFI_LIB:C_0805 + rusefi_lib:C_0805 + C51207 Kemet,C0805C331J1GACTU DIGI,399-1131-1-ND JLCPCB,C51207 - + 5A782C6D 330pF - rusEFI_LIB:C_0805 + rusefi_lib:C_0805 + C51207 Kemet,C0805C331J1GACTU DIGI,399-1131-1-ND JLCPCB,C51207 - + 5A7839E9 @@ -411,31 +441,31 @@ DIGI,MCS1632R010FERCT-ND , - + 5A7839EF 0.22uF - rusEFI_LIB:C_0805 + rusefi_lib:C_0805 KEMET,C0805C224M1RACTU DIGI,399-9205-1-ND , - + 5A7847CB 0.22uF - rusEFI_LIB:C_0805 + rusefi_lib:C_0805 KEMET,C0805C224M1RACTU DIGI,399-9205-1-ND , - + 5A7848D8 @@ -447,7 +477,7 @@ DIGI,493-1680-ND , - + 5A784974 @@ -459,67 +489,71 @@ DIGI,493-1680-ND , - + 5A784A74 6uH - rusEFI_LIB:744710610-Inductor + rusefi_lib:744710610-Inductor Würth Elektronik,744710610 DIGI,732-3255-ND , - + 5A78864F 0.22uF - rusEFI_LIB:C_0805 + rusefi_lib:C_0805 + C5378 KEMET,C0805C224M1RACTU DIGI,399-9205-1-ND , - + 5A7887D5 0.22uF - rusEFI_LIB:C_0805 + rusefi_lib:C_0805 + C5378 KEMET,C0805C224M1RACTU DIGI,399-9205-1-ND , - + 5A788E92 10R - rusEFI_LIB:R_0805 + rusefi_lib:R_0805 + C17403 Stackpole,RMCF0805JG10R0 DIGI,RMCF0805JG10R0CT-ND JLCPCB,C17403 - + 5A78D0D0 1000pF - rusEFI_LIB:C_0805 + rusefi_lib:C_0805 + C209838 avx,08051C102KAT2A DIGI,478-1352-1-ND JLCPCB,C209838 - + 5A78D0D6 @@ -527,47 +561,51 @@ BUK9230-100B TO_SOT_Packages_SMD:TO-252-2Lead + C194346 Nexperia,BUK9230-100B DIGI,1727-4708-1-ND , - + 5A78D8ED 10R - rusEFI_LIB:R_0805 + rusefi_lib:R_0805 + C17403 Stackpole,RMCF0805JG10R0 DIGI,RMCF0805JG10R0CT-ND JLCPCB,C17403 - + 5A78D8F4 1000pF - rusEFI_LIB:C_0805 + rusefi_lib:C_0805 + C209838 avx,08051C102KAT2A DIGI,478-1352-1-ND JLCPCB,C209838 - + 5A78D8FA 330pF - rusEFI_LIB:C_0805 + rusefi_lib:C_0805 + C51207 Kemet,C0805C331J1GACTU DIGI,399-1131-1-ND JLCPCB,C51207 - + 5A78DE61 @@ -575,23 +613,25 @@ 0R015 Resistors_SMD:R_1206_HandSoldering + C201281 Panasonic,ERJ-8CWFR015V DIGI,P0.015BVCT-ND JLCPCB,C201281 - + 5A78DE67 4700pF - rusEFI_LIB:C_0805 + rusefi_lib:C_0805 + C21217 TDK,C2012C0G2A472J125AA DIGI,445-2324-1-ND JLCPCB,C21217 - + 5A78EDB4 @@ -599,159 +639,157 @@ STPS2H100UY Diodes_SMD:D_SMB + C157420 ST,STPS2H100UY DIGI,497-11093-1-ND , - + 5A78EEDA 4700pF - rusEFI_LIB:C_0805 + rusefi_lib:C_0805 + C21217 TDK,C2012C0G2A472J125AA DIGI,445-2324-1-ND JLCPCB,C21217 - + 5A78F77C - - MC33816 - rusEFI_LIB:HTQFP-64-1EP_10x10mm_Pitch0.5mm_ThermalPad_for_MC33816 - - FreeScale,MC33816AE - Mouser,841-MC33816AE - , - - - - 5A794269 - 0.1uF - rusEFI_LIB:C_0805 + rusefi_lib:C_0805 + C49678 AVX,08055C104MAT2A DIGI,478-3351-1-ND JLCPCB,C49678 - + 5A7A6CDB 0.1uF - rusEFI_LIB:C_0805 + rusefi_lib:C_0805 + C49678 AVX,08055C104MAT2A DIGI,478-3351-1-ND JLCPCB,C49678 - + 5A7A6FD2 4.7uF - rusEFI_LIB:C_0805 + rusefi_lib:C_0805 + C1779 Taiyo Yuden,TMK212AB7475KG-T DIGI,587-2990-1-ND JLCPCB,C1779 - + 5A7A7EEF 0.1uF - rusEFI_LIB:C_0805 + rusefi_lib:C_0805 + C49678 AVX,08055C104MAT2A DIGI,478-3351-1-ND JLCPCB,C49678 - + 5A7A8043 0.1uF - rusEFI_LIB:C_0805 + rusefi_lib:C_0805 + C49678 AVX,08055C104MAT2A DIGI,478-3351-1-ND JLCPCB,C49678 - + 5A7A8271 1uF - rusEFI_LIB:C_0805 + rusefi_lib:C_0805 + C28323 Yageo,CC0805KKX7R8BB105 DIGI,311-1456-1-ND JLCPCB,C28323 - + 5A7A8277 0.33uF - rusEFI_LIB:C_0805 + rusefi_lib:C_0805 + C1740 Yageo,CC0805KKX7R8BB334 DIGI,311-3385-1-ND JLCPCB,C1740 - + 5A7AA85D 0.33uF - rusEFI_LIB:C_0805 + rusefi_lib:C_0805 + C1740 Yageo,CC0805KKX7R8BB334 DIGI,311-3385-1-ND JLCPCB,C1740 - + 5A7B4455 CONN_01X01 - Connect:PINTST - + Connector_Pin:Pin_D0.7mm_L6.5mm_W1.8mm_FlatFork + 5A822E2E CONN_01X01 - Connect:PINTST - + Connector_Pin:Pin_D0.7mm_L6.5mm_W1.8mm_FlatFork + 5A8231FD CONN_01X01 - Connect:PINTST - + Connector_Pin:Pin_D0.7mm_L6.5mm_W1.8mm_FlatFork + 5A823A30 CONN_01X01 - Connect:PINTST - + Connector_Pin:Pin_D0.7mm_L6.5mm_W1.8mm_FlatFork + 5A823A36 @@ -763,7 +801,7 @@ DIGI,338-1553-ND , - + 5A82A32A @@ -775,7 +813,7 @@ DIGI,338-1553-ND , - + 5A82A81F @@ -787,7 +825,7 @@ DIGI,S9171-ND , - + 5A834896 @@ -799,21 +837,21 @@ DIGI,S9171-ND , - + 5A834BC6 CONN_01X03 Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm - + 5A85AAB0 CONN_01X03 Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm - + 5A863218 @@ -824,33 +862,34 @@ epson,SG7050CAN 1.000000M-TJGA3 DIGI,SER3990CT-ND - + 5A86707B CONN_01X03 Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm - + 5A8689CD CONN_01X03 Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm - + 5A8787FF 330pF - rusEFI_LIB:C_0805 + rusefi_lib:C_0805 + C51207 Kemet,C0805C331J1GACTU DIGI,399-1131-1-ND JLCPCB,C51207 - + 5A87C95B @@ -858,11 +897,12 @@ BUK9230-100B TO_SOT_Packages_SMD:TO-252-2Lead + C194346 Nexperia,BUK9230-100B DIGI,1727-4708-1-ND , - + 5A87C961 @@ -870,83 +910,90 @@ BUK9230-100B TO_SOT_Packages_SMD:TO-252-2Lead + C194346 Nexperia,BUK9230-100B DIGI,1727-4708-1-ND , - + 5A87C967 1000pF - rusEFI_LIB:C_0805 + rusefi_lib:C_0805 + C209838 avx,08051C102KAT2A DIGI,478-1352-1-ND JLCPCB,C209838 - + 5A87C96D 1000pF - rusEFI_LIB:C_0805 + rusefi_lib:C_0805 + C209838 avx,08051C102KAT2A DIGI,478-1352-1-ND JLCPCB,C209838 - + 5A87C973 10R - rusEFI_LIB:R_0805 + rusefi_lib:R_0805 + C17403 Stackpole,RMCF0805JG10R0 DIGI,RMCF0805JG10R0CT-ND JLCPCB,C17403 - + 5A87C979 10R - rusEFI_LIB:R_0805 + rusefi_lib:R_0805 + C17403 Stackpole,RMCF0805JG10R0 DIGI,RMCF0805JG10R0CT-ND JLCPCB,C17403 - + 5A87C97F 4700pF - rusEFI_LIB:C_0805 + rusefi_lib:C_0805 + C21217 TDK,C2012C0G2A472J125AA DIGI,445-2324-1-ND JLCPCB,C21217 - + 5A87C985 4700pF - rusEFI_LIB:C_0805 + rusefi_lib:C_0805 + C21217 TDK,C2012C0G2A472J125AA DIGI,445-2324-1-ND JLCPCB,C21217 - + 5A87C9B7 @@ -954,11 +1001,12 @@ STPS2H100UY Diodes_SMD:D_SMB + C157420 ST,STPS2H100UY DIGI,497-11093-1-ND , - + 5A87C9C3 @@ -966,59 +1014,64 @@ BUK9230-100B TO_SOT_Packages_SMD:TO-252-2Lead + C194346 Nexperia,BUK9230-100B DIGI,1727-4708-1-ND , - + 5A87C9CA 10R - rusEFI_LIB:R_0805 + rusefi_lib:R_0805 + C17403 Stackpole,RMCF0805JG10R0 DIGI,RMCF0805JG10R0CT-ND JLCPCB,C17403 - + 5A87C9D0 1000pF - rusEFI_LIB:C_0805 + rusefi_lib:C_0805 + C209838 avx,08051C102KAT2A DIGI,478-1352-1-ND JLCPCB,C209838 - + 5A87C9D6 4700pF - rusEFI_LIB:C_0805 + rusefi_lib:C_0805 + C21217 TDK,C2012C0G2A472J125AA DIGI,445-2324-1-ND JLCPCB,C21217 - + 5A87C9DC 4700pF - rusEFI_LIB:C_0805 + rusefi_lib:C_0805 + C21217 TDK,C2012C0G2A472J125AA DIGI,445-2324-1-ND JLCPCB,C21217 - + 5A87C9F4 @@ -1026,35 +1079,38 @@ BUK9230-100B TO_SOT_Packages_SMD:TO-252-2Lead + C194346 Nexperia,BUK9230-100B DIGI,1727-4708-1-ND , - + 5A87CA07 10R - rusEFI_LIB:R_0805 + rusefi_lib:R_0805 + C17403 Stackpole,RMCF0805JG10R0 DIGI,RMCF0805JG10R0CT-ND JLCPCB,C17403 - + 5A87CA0D 1000pF - rusEFI_LIB:C_0805 + rusefi_lib:C_0805 + C209838 avx,08051C102KAT2A DIGI,478-1352-1-ND JLCPCB,C209838 - + 5A87CA13 @@ -1062,97 +1118,101 @@ 0R015 Resistors_SMD:R_1206_HandSoldering + C201281 Panasonic,ERJ-8CWFR015V DIGI,P0.015BVCT-ND JLCPCB,C201281 - + 5A87CA19 0.33uF - rusEFI_LIB:C_0805 + rusefi_lib:C_0805 + C1740 Yageo,CC0805KKX7R8BB334 DIGI,311-3385-1-ND JLCPCB,C1740 - + 5A87CA63 CONN_01X01 - Connect:PINTST - + Connector_Pin:Pin_D0.7mm_L6.5mm_W1.8mm_FlatFork + 5A87CA71 CONN_01X01 - Connect:PINTST - + Connector_Pin:Pin_D0.7mm_L6.5mm_W1.8mm_FlatFork + 5A87CA77 0.33uF - rusEFI_LIB:C_0805 + rusefi_lib:C_0805 + C1740 Yageo,CC0805KKX7R8BB334 DIGI,311-3385-1-ND JLCPCB,C1740 - + 5A8AA9EF 0.33uF - rusEFI_LIB:C_0805 + rusefi_lib:C_0805 + C1740 Yageo,CC0805KKX7R8BB334 DIGI,311-3385-1-ND JLCPCB,C1740 - + 5A8AD52C INJ_Term - Terminal_Blocks:TerminalBlock_bornier-2_P5.08mm + TerminalBlock:TerminalBlock_bornier-2_P5.08mm onshore,OSTTG025100B DIGI,ED2703-ND , - + 5A9A3046 INJ_Term - Terminal_Blocks:TerminalBlock_bornier-2_P5.08mm + TerminalBlock:TerminalBlock_bornier-2_P5.08mm onshore,OSTTG025100B DIGI,ED2703-ND , - + 5A9A311B INJ_Term - Terminal_Blocks:TerminalBlock_bornier-2_P5.08mm + TerminalBlock:TerminalBlock_bornier-2_P5.08mm onshore,OSTTG025100B DIGI,ED2703-ND , - + 5A9A31DF @@ -1164,7 +1224,7 @@ DIGI,ED2703-ND , - + 5A9A347F @@ -1176,39 +1236,39 @@ DIGI,ED2703-ND , - + 5A9BD461 CONN_01X01 - Connect:PINTST - + Connector_Pin:Pin_D0.7mm_L6.5mm_W1.8mm_FlatFork + 5A9C3BEC CONN_01X01 - Connect:PINTST - + Connector_Pin:Pin_D0.7mm_L6.5mm_W1.8mm_FlatFork + 5A9C3BF2 CONN_01X01 - Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm - + Connector_Pin:Pin_D1.4mm_L8.5mm_W2.8mm_FlatFork + 5A9173F7 Conn_01x02 - Connect:PINHEAD1-2 + TerminalBlock:TerminalBlock_bornier-2_P5.08mm TE,282834-2 DIGI,A98333-ND - + 5CFBC5AF @@ -1216,11 +1276,12 @@ SBR10200CTL TO_SOT_Packages_SMD:TO-252-2Lead + C135494 Diodes,SBR10200CTL-13 DIGI,SBR10200CTL-13DICT-ND , - + 5D10BF66 @@ -1228,11 +1289,12 @@ SBR10200CTL TO_SOT_Packages_SMD:TO-252-2Lead + C135494 Diodes,SBR10200CTL-13 DIGI,SBR10200CTL-13DICT-ND , - + 5D11055A @@ -1240,18 +1302,711 @@ STPS2H100UY Diodes_SMD:D_SMB + C157420 ST,STPS2H100UY DIGI,497-11093-1-ND , - + 5A87CA00 + + MC33816 + rusefi_lib:HTQFP-64-1EP_10x10mm_Pitch0.5mm_ThermalPad_for_MC33816 + + FreeScale,MC33816AE + Mouser,841-MC33816AE + , + + + + 5A794269 + + + 1k + rusefi_lib:R_0805 + + C17513 + , + , + , + + + + 5C77EABB + + + LED_Small + LED_SMD:LED_0805_2012Metric + + C2296 + + + + 5C77F8BF + + + 1k + rusefi_lib:R_0805 + + C17513 + , + , + , + + + + 5C782A59 + + + LED_Small + LED_SMD:LED_0805_2012Metric + + C2296 + + + + 5C782A5F + + + 1k + rusefi_lib:R_0805 + + C17513 + , + , + , + + + + 5C782B69 + + + LED_Small + LED_SMD:LED_0805_2012Metric + + C2296 + + + + 5C782B6F + + + 1k + rusefi_lib:R_0805 + + C17513 + , + , + , + + + + 5C782C29 + + + LED_Small + LED_SMD:LED_0805_2012Metric + + C2296 + + + + 5C782C2F + + + 1k + rusefi_lib:R_0805 + + C17513 + , + , + , + + + + 5C7831EB + + + LED_Small + LED_SMD:LED_0805_2012Metric + + C2296 + + + + 5C7831F1 + + + 1k + rusefi_lib:R_0805 + + C17513 + , + , + , + + + + 5C783203 + + + LED_Small + LED_SMD:LED_0805_2012Metric + + C2296 + + + + 5C783209 + + + 1k + rusefi_lib:R_0805 + + C17513 + , + , + , + + + + 5C78321B + + + LED_Small + LED_SMD:LED_0805_2012Metric + + C2296 + + + + 5C783221 + + + 1k + rusefi_lib:R_0805 + + C17513 + , + , + , + + + + 5C783233 + + + LED_Small + LED_SMD:LED_0805_2012Metric + + C2296 + + + + 5C783239 + + + 1k + rusefi_lib:R_0805 + + C17513 + , + , + , + + + + 5C78324B + + + LED_Small + LED_SMD:LED_0805_2012Metric + + C2296 + + + + 5C783251 + + + 1k + rusefi_lib:R_0805 + + C17513 + , + , + , + + + + 5C783AE3 + + + LED_Small + LED_SMD:LED_0805_2012Metric + + C2296 + + + + 5C783AE9 + + + 1k + rusefi_lib:R_0805 + + C17513 + , + , + , + + + + 5C783BB5 + + + LED_Small + LED_SMD:LED_0805_2012Metric + + C2296 + + + + 5C783BBB + + + 1k + rusefi_lib:R_0805 + + C17513 + , + , + , + + + + 5C783C89 + + + LED_Small + LED_SMD:LED_0805_2012Metric + + C2296 + + + + 5C783C8F + + + 1k + rusefi_lib:R_0805 + + C17513 + , + , + , + + + + 5C783E33 + + + LED_Small + LED_SMD:LED_0805_2012Metric + + C2296 + + + + 5C783E39 + + + 1k + rusefi_lib:R_0805 + + C17513 + , + , + , + + + + 5C784189 + + + LED_Small + LED_SMD:LED_0805_2012Metric + + C2296 + + + + 5C78418F + + + 1k + rusefi_lib:R_0805 + + C17513 + , + , + , + + + + 5C78425F + + + LED_Small + LED_SMD:LED_0805_2012Metric + + C2296 + + + + 5C784265 + + + 1k + rusefi_lib:R_0805 + + C17513 + , + , + , + + + + 6012DE25 + + + LED_Small + LED_SMD:LED_0805_2012Metric + + C2296 + + + + 6012DE2F + + + 1k + rusefi_lib:R_0805 + + C17513 + , + , + , + + + + 6012DE3D + + + LED_Small + LED_SMD:LED_0805_2012Metric + + C2296 + + + + 6012DE47 + + + 1k + rusefi_lib:R_0805 + + C17513 + , + , + , + + + + 60161036 + + + LED_Small + LED_SMD:LED_0805_2012Metric + + C2296 + + + + 60161040 + + + 1k + rusefi_lib:R_0805 + + C17513 + , + , + , + + + + 6016104E + + + LED_Small + LED_SMD:LED_0805_2012Metric + + C2296 + + + + 60161058 + + + 1k + rusefi_lib:R_0805 + + C17513 + , + , + , + + + + 60253AF8 + + + LED_Small + LED_SMD:LED_0805_2012Metric + + C2296 + + + + 60253B02 + + + Zener_62V + Diode_SMD:D_MiniMELF + ~ + + C8088 + + + + 602D0F41 + + + CONN_01X01 + Connector_Pin:Pin_D0.7mm_L6.5mm_W1.8mm_FlatFork + + + 5EF65AB2 + + + CONN_01X01 + Connector_Pin:Pin_D0.7mm_L6.5mm_W1.8mm_FlatFork + + + 5EF7275A + + + CONN_01X01 + Connector_Pin:Pin_D0.7mm_L6.5mm_W1.8mm_FlatFork + + + 5EF770A6 + + + CONN_01X01 + Connector_Pin:Pin_D0.7mm_L6.5mm_W1.8mm_FlatFork + + + 5EFE3ED4 + + + CONN_01X01 + Connector_Pin:Pin_D0.7mm_L6.5mm_W1.8mm_FlatFork + + + 5EFE4583 + + + 1k + rusefi_lib:R_0805 + + C17513 + , + , + , + + + + 5F0EB99E + + + LED_Small + LED_SMD:LED_0805_2012Metric + + C2296 + + + + 5F0EB9A9 + + + 1k + rusefi_lib:R_0805 + + C17513 + , + , + , + + + + 5F12E455 + + + LED_Small + LED_SMD:LED_0805_2012Metric + + C2296 + + + + 5F12E460 + + + 1k + rusefi_lib:R_0805 + + C17513 + , + , + , + + + + 5F164998 + + + LED_Small + LED_SMD:LED_0805_2012Metric + + C2296 + + + + 5F1649A3 + + + CONN_01X01 + Connector_Pin:Pin_D0.7mm_L6.5mm_W1.8mm_FlatFork + + + 5F45362F + + + CONN_01X01 + Connector_Pin:Pin_D0.7mm_L6.5mm_W1.8mm_FlatFork + + + 5F54EAC1 + - + + 2-polar test point + ~ + + Pin* + Test* + + + TP + TestPoint_2Pole + + + + + + + + Generic connector, single row, 01x01, script generated (kicad-library-utils/schlib/autogen/connector/) + ~ + + Connector*:*_1x??_* + + + J + Conn_01x01 + + + + + + + Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) + ~ + + Connector*:*_1x??_* + + + J + Conn_01x02 + + + + + + + + Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) + ~ + + Connector*:*_1x??_* + + + J + Conn_01x03 + + + + + + + + + Generic connector, double row, 02x08, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) + ~ + + Connector*:*_2x??_* + + + J + Conn_02x08_Odd_Even + + + + + + + + + + + + + + + + + + + + + Unpolarized capacitor + ~ C_* @@ -1264,70 +2019,9 @@ - - - Pin_Header_Straight_1X01 - Pin_Header_Angled_1X01 - Socket_Strip_Straight_1X01 - Socket_Strip_Angled_1X01 - - - P - CONN_01X01 - - - - - - - - Pin_Header_Straight_1X03 - Pin_Header_Angled_1X03 - Socket_Strip_Straight_1X03 - Socket_Strip_Angled_1X03 - - - P - CONN_01X03 - - - - - - - - - - Pin_Header_Straight_2X08 - Pin_Header_Angled_2X08 - Socket_Strip_Straight_2X08 - Socket_Strip_Angled_2X08 - - - P - CONN_02X08 - - - - - - - - - - - - - - - - - - - - - - Polarised capacitor + + Polarized capacitor, US symbol + ~ CP_* @@ -1340,28 +2034,15 @@ - - Generic connector, single row, 01x02 + + Schottky diode, cathode on pins 1 and 2 ~ - Connector*:*_??x*mm* - Connector*:*1x??x*mm* - Pin?Header?Straight?1X* - Pin?Header?Angled?1X* - Socket?Strip?Straight?1X* - Socket?Strip?Angled?1X* + TO-???* + *_Diode_* + *SingleDiode* + D_* - - J - Conn_01x02 - - - - - - - - Schottky diode, two cathode pins D D_Schottky_KKA @@ -1372,8 +2053,9 @@ - - Dual schottky diode, common cathode + + Dual Schottky diode, common cathode on pin 2 + ~ D D_Schottky_x2_KCom_AKA @@ -1384,11 +2066,11 @@ - - Diode, small symbol, alternativ symbol + + Diode, small symbol, filled shape + ~ TO-???* - *SingleDiode *_Diode_* *SingleDiode* D_* @@ -1402,8 +2084,27 @@ - + + Zener diode, small symbol + ~ + + TO-???* + *_Diode_* + *SingleDiode* + D_* + + + D + D_Zener_Small + + + + + + + Inductor + ~ Choke_* *Coil* @@ -1419,6 +2120,69 @@ + + Light emitting diode, small symbol + ~ + + LED* + LED_SMD:* + LED_THT:* + + + D + LED_Small + + + + + + + + N-MOSFET transistor, gate/drain/source + ~ + + Q + Q_NMOS_GDS + + + + + + + + + Resistor + ~ + + R_* + + + R + R + + + + + + + + LVCMOS Ultra Low Phase Noise XO / VCXO, Abracon ABLNO + https://abracon.com/Precisiontiming/ABLNO.pdf + + Oscillator*Abracon*ABLNO* + + + X + ABLNO + Oscillator:Oscillator_SMD_Abracon_ABLNO + + + + + + + + Housings_QFP:HTQFP-64-1EP_10x10mm_Pitch0.5mm_ThermalPad @@ -1494,559 +2258,659 @@ - - - - - - Transistor N-MOSFET with substrate diode (general) - - Q - Q_NMOS_GDS - - - - - - - - - Resistor - - R_* - R_* - - - R - R - - - - - - - - point - - J - TEST_2P - - - - - - - - 4 pins - - J - XLR4 - - - - - - + - - C:\Program Files\KiCad\share\kicad\library\conn.lib + + C:\Program Files\KiCad\share\kicad\library/Connector.lib + + + C:\Program Files\KiCad\share\kicad\library/Connector_Generic.lib + + + C:\Program Files\KiCad\share\kicad\library/Device.lib + + + C:\Program Files\KiCad\share\kicad\library/Oscillator.lib - C:\Users\Vista_64_D630\Desktop\rusefi_direct\hardware\rusefi_lib\mc33816.lib - - - C:\Users\Vista_64_D630\Desktop\rusefi_direct\hardware\Common_Rail_MC33816\Common_Rail_MC33816-cache.lib - - - C:\Program Files\KiCad\share\kicad\library\device.lib + C:\Users\Owner\Desktop\rusefi_GH_PLEASEdoNOTforget20\hardware\Common_Rail_MC33816/../rusefi_lib/mc33816.lib - - - + + + + + + - - - - + + + + + + - - - - + + + + - - - + + - - - - + + + + - - - + + + + - - - - + + + + - - - + + + + - - - - - - + + + + - - - - + + + + - - - - - - + + + + - - - + + + + - - - + + + + - - - - + + + + - - - + + + + - - - + + + + - - - - - - - - - - + + + - - - + + + - - - - - - - - - - + + + - - - - - - + + + + - - - - - - - - - + + + + - - - - - - - + + + - - - - - - - - - - - - - - - + + - - - - + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + - - - - - - - - - - - - - - - - - - - - - - - - + + - - - + + + - - - - + + + - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - + + + + - - - - - - + + + + - - - - - - + + + - - - + + + - - - + + + + + + - - - + + + - - - + + + - - + + + - - - + + + - - + + + - - - + + + - - - + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - + + + - - + + + + + + - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/hardware/Common_Rail_MC33816/gerbers/Common_Rail_MC33816_R0.3.2/Common_Rail_MC33816_R0.3.2-top-pos.csv b/hardware/Common_Rail_MC33816/gerbers/Common_Rail_MC33816_R0.3.2/Common_Rail_MC33816_R0.3.2-top-pos.csv new file mode 100644 index 0000000000..6eaf5387c4 --- /dev/null +++ b/hardware/Common_Rail_MC33816/gerbers/Common_Rail_MC33816_R0.3.2/Common_Rail_MC33816_R0.3.2-top-pos.csv @@ -0,0 +1,130 @@ +Ref,Val,Package,PosX,PosY,Rot,Side +"C8","0.1uF","C_0805",-7.366000,48.641000,0.000000,top +"C9","1uF","C_0805",-7.366000,50.673000,0.000000,top +"C10","0.1uF","C_0805",-5.588000,45.339000,270.000000,top +"C11","0.1uF","C_0805",-7.366000,53.721000,0.000000,top +"C12","4.7uF","C_0805",-26.416000,63.881000,90.000000,top +"C13","0.1uF","C_0805",-24.257000,63.897000,90.000000,top +"C16","0.22uF","C_0805",-77.597000,90.551000,90.000000,top +"C17","0.22uF","C_0805",-54.864000,52.451000,270.000000,top +"C23","330pF","C_0805",-30.353000,69.596000,270.000000,top +"C24","330pF","C_0805",-23.368000,69.596000,270.000000,top +"C25","0.22uF","C_0805",-63.881000,112.395000,270.000000,top +"C26","470pF","C_0805",-33.020000,64.770000,270.000000,top +"C27","0.22uF","C_0805",-45.212000,103.886000,270.000000,top +"C28","330pF","C_0805",-10.541000,63.770000,90.000000,top +"C35","1000pF","C_0805",-46.990000,95.631000,90.000000,top +"C36","1000pF","C_0805",-34.163000,87.376000,90.000000,top +"C37","1000pF","C_0805",-47.561500,118.427500,90.000000,top +"C38","1000pF","C_0805",-34.163000,109.601000,90.000000,top +"C39","0.33uF","C_0805",-26.543000,50.292000,270.000000,top +"C40","0.33uF","C_0805",-29.718000,51.816000,270.000000,top +"C41","0.33uF","C_0805",-29.718000,55.626000,270.000000,top +"C42","0.33uF","C_0805",-27.051000,56.642000,270.000000,top +"C43","4700pF","C_0805",-34.163000,82.423000,270.000000,top +"C44","4700pF","C_0805",-29.083000,101.346000,180.000000,top +"C45","4700pF","C_0805",-32.893000,101.346000,0.000000,top +"C46","4700pF","C_0805",-35.052000,123.190000,180.000000,top +"C47","4700pF","C_0805",-20.574000,98.679000,0.000000,top +"C48","4700pF","C_0805",-20.447000,80.518000,0.000000,top +"C49","4700pF","C_0805",-20.574000,102.870000,0.000000,top +"C50","4700pF","C_0805",-20.574000,121.285000,0.000000,top +"C55","1000pF","C_0805",-5.461000,94.742000,270.000000,top +"C56","1000pF","C_0805",-5.334000,84.836000,270.000000,top +"C57","1000pF","C_0805",-4.826000,107.680000,270.000000,top +"C58","1000pF","C_0805",-5.080000,118.491000,270.000000,top +"C59","330pF","C_0805",-1.651000,59.436000,90.000000,top +"C60","330pF","C_0805",-3.683000,59.436000,90.000000,top +"C63","1000pF","C_0805",-34.163000,129.921000,90.000000,top +"C64","0.33uF","C_0805",-26.543000,60.274200,90.000000,top +"C65","4700pF","C_0805",-35.052000,125.222000,180.000000,top +"C67","4700pF","C_0805",-20.574000,123.317000,0.000000,top +"C71","1000pF","C_0805",-4.445000,129.540000,270.000000,top +"C73","330pF","C_0805",-5.715000,59.436000,90.000000,top +"D1","LED_Small","LED_0805_2012Metric",-8.255000,28.575000,90.000000,top +"D2","LED_Small","LED_0805_2012Metric",-10.795000,28.575000,90.000000,top +"D3","LED_Small","LED_0805_2012Metric",-13.335000,28.575000,90.000000,top +"D4","LED_Small","LED_0805_2012Metric",-15.875000,28.575000,90.000000,top +"D5","LED_Small","LED_0805_2012Metric",-18.415000,28.575000,90.000000,top +"D6","LED_Small","LED_0805_2012Metric",-20.955000,28.575000,90.000000,top +"D7","LED_Small","LED_0805_2012Metric",-23.495000,28.575000,90.000000,top +"D8","LED_Small","LED_0805_2012Metric",-26.035000,28.575000,90.000000,top +"D9","FFD10UP20S","TO-252-2Lead",-45.593000,72.136000,270.000000,top +"D10","SBR10200CTL","TO-252-2Lead",-36.068000,95.631000,90.000000,top +"D11","SBR10200CTL","TO-252-2Lead",-36.068000,118.491000,90.000000,top +"D12","STPS2H100UY","D_SMB",-20.193000,93.726000,90.000000,top +"D13","STPS2H100UY","D_SMB",-20.193000,85.471000,270.000000,top +"D14","STPS2H100UY","D_SMB",-20.193000,107.696000,270.000000,top +"D15","STPS2H100UY","D_SMB",-20.193000,116.586000,90.000000,top +"D16","STPS2H100UY","D_SMB",-28.448000,133.731000,0.000000,top +"D17","STPS2H100UY","D_SMB",-20.193000,128.016000,270.000000,top +"D18","LED_Small","LED_0805_2012Metric",-5.715000,28.575000,90.000000,top +"D19","LED_Small","LED_0805_2012Metric",-51.435000,28.575000,90.000000,top +"D20","LED_Small","LED_0805_2012Metric",-46.355000,28.575000,90.000000,top +"D21","LED_Small","LED_0805_2012Metric",-41.275000,28.575000,90.000000,top +"D22","LED_Small","LED_0805_2012Metric",-36.195000,28.575000,90.000000,top +"D23","LED_Small","LED_0805_2012Metric",-33.655000,28.575000,90.000000,top +"D24","LED_Small","LED_0805_2012Metric",-31.115000,28.575000,90.000000,top +"D25","LED_Small","LED_0805_2012Metric",-48.895000,28.575000,90.000000,top +"D26","LED_Small","LED_0805_2012Metric",-43.815000,28.575000,90.000000,top +"D27","LED_Small","LED_0805_2012Metric",-38.735000,28.575000,90.000000,top +"D28","LED_Small","LED_0805_2012Metric",-56.515000,133.985000,0.000000,top +"D29","LED_Small","LED_0805_2012Metric",-28.575000,28.575000,90.000000,top +"D30","Zener_62V","D_MiniMELF",-72.390000,119.380000,90.000000,top +"D31","LED_Small","LED_0805_2012Metric",-72.390000,128.270000,270.000000,top +"D32","LED_Small","LED_0805_2012Metric",-51.435000,49.530000,0.000000,top +"D33","LED_Small","LED_0805_2012Metric",-51.435000,46.355000,0.000000,top +"L2","10uH","IHLP6767GZER100M01",-84.455000,38.735000,270.000000,top +"Q2","BUK9230-100B","TO-252-2Lead",-36.703000,64.516000,90.000000,top +"Q3","BUK9230-100B","TO-252-2Lead",-49.403000,95.631000,90.000000,top +"Q4","BUK9230-100B","TO-252-2Lead",-36.957000,87.376000,90.000000,top +"Q5","BUK9230-100B","TO-252-2Lead",-50.355500,118.427500,90.000000,top +"Q6","BUK9230-100B","TO-252-2Lead",-36.830000,109.601000,90.000000,top +"Q7","BUK9230-100B","TO-252-2Lead",-8.128000,95.631000,90.000000,top +"Q8","BUK9230-100B","TO-252-2Lead",-8.128000,86.741000,90.000000,top +"Q9","BUK9230-100B","TO-252-2Lead",-8.128000,109.601000,90.000000,top +"Q10","BUK9230-100B","TO-252-2Lead",-8.128000,118.491000,90.000000,top +"Q11","BUK9230-100B","TO-252-2Lead",-37.084000,129.921000,90.000000,top +"Q12","BUK9230-100B","TO-252-2Lead",-7.620000,129.921000,90.000000,top +"R1","1k","R_0805",-8.255000,32.385000,90.000000,top +"R2","1k","R_0805",-10.795000,32.385000,90.000000,top +"R3","1k","R_0805",-13.335000,32.385000,90.000000,top +"R4","1k","R_0805",-15.875000,32.385000,90.000000,top +"R5","1k","R_0805",-18.415000,32.385000,90.000000,top +"R6","1k","R_0805",-20.955000,32.385000,90.000000,top +"R7","1k","R_0805",-23.495000,32.385000,90.000000,top +"R8","1k","R_0805",-26.035000,32.385000,90.000000,top +"R9","5.1R","R_0805",-30.353000,73.406000,270.000000,top +"R10","5.1R","R_0805",-23.368000,73.406000,270.000000,top +"R11","10R","R_0805",-32.893000,61.849000,0.000000,top +"R12","0R010","R_1206_HandSoldering",-14.478000,72.136000,90.000000,top +"R13","10R","R_0805",-47.498000,90.551000,270.000000,top +"R14","10R","R_0805",-36.703000,81.026000,270.000000,top +"R15","10R","R_0805",-47.561500,114.173000,270.000000,top +"R16","10R","R_0805",-36.703000,103.886000,270.000000,top +"R17","10R","R_0805",-10.414000,79.121000,270.000000,top +"R18","10R","R_0805",-10.414000,82.296000,180.000000,top +"R19","10R","R_0805",-10.033000,104.648000,180.000000,top +"R20","10R","R_0805",-10.033000,101.727000,270.000000,top +"R21","0R015","R_1206_HandSoldering",-2.032000,90.043000,270.000000,top +"R22","0R015","R_1206_HandSoldering",-2.159000,112.014000,270.000000,top +"R23","10R","R_0805",-38.036500,124.904500,270.000000,top +"R24","10R","R_0805",-9.398000,124.206000,270.000000,top +"R25","1k","R_0805",-5.715000,32.385000,90.000000,top +"R26","0R015","R_1206_HandSoldering",-1.905000,129.921000,270.000000,top +"R27","1k","R_0805",-51.435000,32.385000,90.000000,top +"R28","1k","R_0805",-46.355000,32.385000,90.000000,top +"R29","1k","R_0805",-41.275000,32.385000,90.000000,top +"R30","1k","R_0805",-36.195000,32.385000,90.000000,top +"R31","1k","R_0805",-33.655000,32.385000,90.000000,top +"R32","1k","R_0805",-31.115000,32.385000,90.000000,top +"R33","1k","R_0805",-48.895000,32.385000,90.000000,top +"R34","1k","R_0805",-43.815000,32.385000,90.000000,top +"R35","1k","R_0805",-38.735000,32.385000,90.000000,top +"R36","1k","R_0805",-52.705000,133.985000,0.000000,top +"R37","1k","R_0805",-28.575000,32.385000,90.000000,top +"R38","1k","R_0805",-72.390000,124.460000,270.000000,top +"R39","1k","R_0805",-47.625000,49.530000,0.000000,top +"R40","1k","R_0805",-47.625000,46.355000,0.000000,top +"U4","MC33816","HTQFP-64-1EP_10x10mm_Pitch0.5mm_ThermalPad_for_MC33816",-17.653000,54.356000,90.000000,top +"Y1","1MHz","Crystal_SMD_SeikoEpson_MC306-4pin_8.0x3.2mm",-33.020000,45.339000,0.000000,top diff --git a/hardware/Common_Rail_MC33816/gerbers/Common_Rail_MC33816_R0.3.2/Common_Rail_MC33816_R0.3.2.zip b/hardware/Common_Rail_MC33816/gerbers/Common_Rail_MC33816_R0.3.2/Common_Rail_MC33816_R0.3.2.zip new file mode 100644 index 0000000000..d7feecd372 Binary files /dev/null and b/hardware/Common_Rail_MC33816/gerbers/Common_Rail_MC33816_R0.3.2/Common_Rail_MC33816_R0.3.2.zip differ diff --git a/hardware/Common_Rail_MC33816/gerbers/Common_Rail_MC33816_R0.3.2/Common_Rail_MC33816_R0.3.2_JLC_BOM.csv b/hardware/Common_Rail_MC33816/gerbers/Common_Rail_MC33816_R0.3.2/Common_Rail_MC33816_R0.3.2_JLC_BOM.csv new file mode 100644 index 0000000000..c1f59ae423 --- /dev/null +++ b/hardware/Common_Rail_MC33816/gerbers/Common_Rail_MC33816_R0.3.2/Common_Rail_MC33816_R0.3.2_JLC_BOM.csv @@ -0,0 +1,34 @@ +Comment,Designator,Footprint,LCSC, LCSC, MFG,MFG#, VEND1,VEND1#, VEND2,VEND2# +"0.1uF","C10,C11,C13,C8","rusefi_lib:C_0805","","C49678","AVX,08055C104MAT2A","DIGI,478-3351-1-ND","JLCPCB,C49678" +"4.7uF","C12","rusefi_lib:C_0805","","C1779","Taiyo Yuden,TMK212AB7475KG-T","DIGI,587-2990-1-ND","JLCPCB,C1779" +"1000uF","C14,C15","Capacitors_ThroughHole:CP_Radial_D22.0mm_P10.00mm_SnapIn","","","Cornell,SLPX102M100A3P3","DIGI,338-1553-ND","," +"390uF","C21,C22","Capacitors_ThroughHole:CP_Radial_D16.0mm_P7.50mm","","","Nichicon,UHE2A391MHD","DIGI,493-1680-ND","," +"0.22uF","C25,C27,C17,C16","rusefi_lib:C_0805","","","KEMET,C0805C224M1RACTU","DIGI,399-9205-1-ND","," +"470pF","C26","rusefi_lib:C_0805","","C1743","TDK,CGA4C2C0G2A471J060AA","DIGI,445-6953-1-ND","JLCPCB,C1743" +"1000pF","C38,C37,C57,C58,C63,C71,C36,C35,C56,C55","rusefi_lib:C_0805","","C209838","avx,08051C102KAT2A","DIGI,478-1352-1-ND","JLCPCB,C209838" +"0.33uF","C41,C64,C39,C40,C42","rusefi_lib:C_0805","","C1740","Yageo,CC0805KKX7R8BB334","DIGI,311-3385-1-ND","JLCPCB,C1740" +"4700pF","C45,C49,C46,C50,C65,C67,C44,C48,C43,C47","rusefi_lib:C_0805","","C21217","TDK,C2012C0G2A472J125AA","DIGI,445-2324-1-ND","JLCPCB,C21217" +"330pF","C60,C23,C24,C28,C73,C59","rusefi_lib:C_0805","","C51207","Kemet,C0805C331J1GACTU","DIGI,399-1131-1-ND","JLCPCB,C51207" +"1uF","C9","rusefi_lib:C_0805","","C28323","Yageo,CC0805KKX7R8BB105","DIGI,311-1456-1-ND","JLCPCB,C28323" +"SBR10200CTL","D11,D10","TO_SOT_Packages_SMD:TO-252-2Lead","","C135494","Diodes,SBR10200CTL-13","DIGI,SBR10200CTL-13DICT-ND","," +"STPS2H100UY","D17,D14,D15,D16,D13,D12","Diodes_SMD:D_SMB","","C157420","ST,STPS2H100UY","DIGI,497-11093-1-ND","," +"LED_Small","D26,D25,D27,D29,D2,D1,D4,D3,D5,D6,D7,D8,D19,D18,D20,D21,D22,D23,D24,D31,D32,D28,D33","LED_SMD:LED_0805_2012Metric","","C2296","","","" +"Zener_62V","D30","Diode_SMD:D_MiniMELF","","C8088","","","" +"FFD10UP20S","D9","TO_SOT_Packages_SMD:TO-252-2Lead","","","ONSEMI,FFD10UP20S","DIGI,FFD10UP20SCT-ND","," +"INJ_Term","J10,J11,J9","TerminalBlock:TerminalBlock_bornier-2_P5.08mm","","","onshore,OSTTG025100B","DIGI,ED2703-ND","," +"CONN_01X01","J15","Connector_Pin:Pin_D1.4mm_L8.5mm_W2.8mm_FlatFork","" +"Conn_01x02","J20","TerminalBlock:TerminalBlock_bornier-2_P5.08mm","","","TE,282834-2","DIGI,A98333-ND","" +"CONN_02X08","J3,J4","Pin_Headers:Pin_Header_Straight_2x08_Pitch2.54mm","","","sullins,SBH11-PBPC-D08-ST-BK","DIGI,S9171-ND","," +"CONN_01X03","J7,J5,J6,J14","Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm","" +"INJ_Term","J8,J12","Terminal_Blocks:TerminalBlock_bornier-2_P5.08mm","","","onshore,OSTTG025100B","DIGI,ED2703-ND","," +"6uH","L1","rusefi_lib:744710610-Inductor","","","Würth Elektronik,744710610","DIGI,732-3255-ND","," +"10uH","L2","rusefi_lib:IHLP6767GZER100M01","","","Vishay,IHLP6767GZER100M01","DIGI,541-1259-1-ND","," +"BUK9230-100B","Q6,Q5,Q9,Q10,Q11,Q2,Q12,Q4,Q3,Q8,Q7","TO_SOT_Packages_SMD:TO-252-2Lead","","C194346","Nexperia,BUK9230-100B","DIGI,1727-4708-1-ND","," +"0R010","R12","Resistors_SMD:R_1206_HandSoldering","","","Ohmite,MCS1632R010FER","DIGI,MCS1632R010FERCT-ND","," +"10R","R16,R15,R19,R20,R11,R23,R24,R14,R13,R18,R17","rusefi_lib:R_0805","","C17403","Stackpole,RMCF0805JG10R0","DIGI,RMCF0805JG10R0CT-ND","JLCPCB,C17403" +"0R015","R22,R26,R21","Resistors_SMD:R_1206_HandSoldering","","C201281","Panasonic,ERJ-8CWFR015V","DIGI,P0.015BVCT-ND","JLCPCB,C201281" +"1k","R34,R33,R35,R37,R2,R1,R4,R3,R5,R6,R7,R8,R27,R25,R28,R29,R30,R31,R32,R38,R39,R36,R40","rusefi_lib:R_0805","","C17513"," , "," , ","," +"5.1R","R9,R10","rusefi_lib:R_0805","","C247080","Stackpole,RMCF0805JT5R10","DIGI,RMCF0805JT5R10CT-ND","JLCPCB,C247080" +"CONN_01X01","TP23,TP24,TP103,TP104,TP101,TP102,TP105,TP106,TP4,TP7,TP3,TP6,TP5,TP2,TP8","Connector_Pin:Pin_D0.7mm_L6.5mm_W1.8mm_FlatFork","" +"MC33816","U4","rusefi_lib:HTQFP-64-1EP_10x10mm_Pitch0.5mm_ThermalPad_for_MC33816","","","FreeScale,MC33816AE","Mouser,841-MC33816AE","," +"1MHz","Y1","Crystals:Crystal_SMD_SeikoEpson_MC306-4pin_8.0x3.2mm","","","epson,SG7050CAN 1.000000M-TJGA3","DIGI,SER3990CT-ND","" \ No newline at end of file diff --git a/hardware/Common_Rail_MC33816/gerbers/Common_Rail_MC33816_R0.3.2/Common_Rail_MC33816_R0.3.2_JLC_CPL.csv b/hardware/Common_Rail_MC33816/gerbers/Common_Rail_MC33816_R0.3.2/Common_Rail_MC33816_R0.3.2_JLC_CPL.csv new file mode 100644 index 0000000000..77977d9130 --- /dev/null +++ b/hardware/Common_Rail_MC33816/gerbers/Common_Rail_MC33816_R0.3.2/Common_Rail_MC33816_R0.3.2_JLC_CPL.csv @@ -0,0 +1,130 @@ +Designator,Val,Mid X,Mid Y,Rotation,Layer +C8,0.1uF,-7.366000,48.641000,0.000000,top +C9,1uF,-7.366000,50.673000,0.000000,top +C10,0.1uF,-5.588000,45.339000,270.000000,top +C11,0.1uF,-7.366000,53.721000,0.000000,top +C12,4.7uF,-26.416000,63.881000,90.000000,top +C13,0.1uF,-24.257000,63.897000,90.000000,top +C16,0.22uF,-77.597000,90.551000,90.000000,top +C17,0.22uF,-54.864000,52.451000,270.000000,top +C23,330pF,-30.353000,69.596000,270.000000,top +C24,330pF,-23.368000,69.596000,270.000000,top +C25,0.22uF,-63.881000,112.395000,270.000000,top +C26,470pF,-33.020000,64.770000,270.000000,top +C27,0.22uF,-45.212000,103.886000,270.000000,top +C28,330pF,-10.541000,63.770000,90.000000,top +C35,1000pF,-46.990000,95.631000,90.000000,top +C36,1000pF,-34.163000,87.376000,90.000000,top +C37,1000pF,-47.561500,118.427500,90.000000,top +C38,1000pF,-34.163000,109.601000,90.000000,top +C39,0.33uF,-26.543000,50.292000,270.000000,top +C40,0.33uF,-29.718000,51.816000,270.000000,top +C41,0.33uF,-29.718000,55.626000,270.000000,top +C42,0.33uF,-27.051000,56.642000,270.000000,top +C43,4700pF,-34.163000,82.423000,270.000000,top +C44,4700pF,-29.083000,101.346000,180.000000,top +C45,4700pF,-32.893000,101.346000,0.000000,top +C46,4700pF,-35.052000,123.190000,180.000000,top +C47,4700pF,-20.574000,98.679000,0.000000,top +C48,4700pF,-20.447000,80.518000,0.000000,top +C49,4700pF,-20.574000,102.870000,0.000000,top +C50,4700pF,-20.574000,121.285000,0.000000,top +C55,1000pF,-5.461000,94.742000,270.000000,top +C56,1000pF,-5.334000,84.836000,270.000000,top +C57,1000pF,-4.826000,107.680000,270.000000,top +C58,1000pF,-5.080000,118.491000,270.000000,top +C59,330pF,-1.651000,59.436000,90.000000,top +C60,330pF,-3.683000,59.436000,90.000000,top +C63,1000pF,-34.163000,129.921000,90.000000,top +C64,0.33uF,-26.543000,60.274200,90.000000,top +C65,4700pF,-35.052000,125.222000,180.000000,top +C67,4700pF,-20.574000,123.317000,0.000000,top +C71,1000pF,-4.445000,129.540000,270.000000,top +C73,330pF,-5.715000,59.436000,90.000000,top +D1,LED_Small,-8.255000,28.575000,90.000000,top +D2,LED_Small,-10.795000,28.575000,90.000000,top +D3,LED_Small,-13.335000,28.575000,90.000000,top +D4,LED_Small,-15.875000,28.575000,90.000000,top +D5,LED_Small,-18.415000,28.575000,90.000000,top +D6,LED_Small,-20.955000,28.575000,90.000000,top +D7,LED_Small,-23.495000,28.575000,90.000000,top +D8,LED_Small,-26.035000,28.575000,90.000000,top +D9,FFD10UP20S,-45.593000,72.136000,0,top +D10,SBR10200CTL,-36.068000,95.631000,180,top +D11,SBR10200CTL,-36.068000,118.491000,180,top +D12,STPS2H100UY,-20.193000,93.726000,90.000000,top +D13,STPS2H100UY,-20.193000,85.471000,270.000000,top +D14,STPS2H100UY,-20.193000,107.696000,270.000000,top +D15,STPS2H100UY,-20.193000,116.586000,90.000000,top +D16,STPS2H100UY,-28.448000,133.731000,0.000000,top +D17,STPS2H100UY,-20.193000,128.016000,270.000000,top +D18,LED_Small,-5.715000,28.575000,90.000000,top +D19,LED_Small,-51.435000,28.575000,90.000000,top +D20,LED_Small,-46.355000,28.575000,90.000000,top +D21,LED_Small,-41.275000,28.575000,90.000000,top +D22,LED_Small,-36.195000,28.575000,90.000000,top +D23,LED_Small,-33.655000,28.575000,90.000000,top +D24,LED_Small,-31.115000,28.575000,90.000000,top +D25,LED_Small,-48.895000,28.575000,90.000000,top +D26,LED_Small,-43.815000,28.575000,90.000000,top +D27,LED_Small,-38.735000,28.575000,90.000000,top +D28,LED_Small,-56.515000,133.985000,0.000000,top +D29,LED_Small,-28.575000,28.575000,90.000000,top +D30,Zener_62V,-72.390000,119.380000,90.000000,top +D31,LED_Small,-72.390000,128.270000,270.000000,top +D32,LED_Small,-51.435000,49.530000,0.000000,top +D33,LED_Small,-51.435000,46.355000,0.000000,top +L2,10uH,-84.455000,38.735000,270.000000,top +Q2,BUK9230-100B,-36.703000,64.516000,180,top +Q3,BUK9230-100B,-49.403000,95.631000,180,top +Q4,BUK9230-100B,-36.957000,87.376000,180,top +Q5,BUK9230-100B,-50.355500,118.427500,180,top +Q6,BUK9230-100B,-36.830000,109.601000,180,top +Q7,BUK9230-100B,-8.128000,95.631000,180,top +Q8,BUK9230-100B,-8.128000,86.741000,180,top +Q9,BUK9230-100B,-8.128000,109.601000,180,top +Q10,BUK9230-100B,-8.128000,118.491000,180,top +Q11,BUK9230-100B,-37.084000,129.921000,180,top +Q12,BUK9230-100B,-7.620000,129.921000,180,top +R1,1k,-8.255000,32.385000,90.000000,top +R2,1k,-10.795000,32.385000,90.000000,top +R3,1k,-13.335000,32.385000,90.000000,top +R4,1k,-15.875000,32.385000,90.000000,top +R5,1k,-18.415000,32.385000,90.000000,top +R6,1k,-20.955000,32.385000,90.000000,top +R7,1k,-23.495000,32.385000,90.000000,top +R8,1k,-26.035000,32.385000,90.000000,top +R9,5.1R,-30.353000,73.406000,270.000000,top +R10,5.1R,-23.368000,73.406000,270.000000,top +R11,10R,-32.893000,61.849000,0.000000,top +R12,0R010,-14.478000,72.136000,90.000000,top +R13,10R,-47.498000,90.551000,270.000000,top +R14,10R,-36.703000,81.026000,270.000000,top +R15,10R,-47.561500,114.173000,270.000000,top +R16,10R,-36.703000,103.886000,270.000000,top +R17,10R,-10.414000,79.121000,270.000000,top +R18,10R,-10.414000,82.296000,180.000000,top +R19,10R,-10.033000,104.648000,180.000000,top +R20,10R,-10.033000,101.727000,270.000000,top +R21,0R015,-2.032000,90.043000,270.000000,top +R22,0R015,-2.159000,112.014000,270.000000,top +R23,10R,-38.036500,124.904500,270.000000,top +R24,10R,-9.398000,124.206000,270.000000,top +R25,1k,-5.715000,32.385000,90.000000,top +R26,0R015,-1.905000,129.921000,270.000000,top +R27,1k,-51.435000,32.385000,90.000000,top +R28,1k,-46.355000,32.385000,90.000000,top +R29,1k,-41.275000,32.385000,90.000000,top +R30,1k,-36.195000,32.385000,90.000000,top +R31,1k,-33.655000,32.385000,90.000000,top +R32,1k,-31.115000,32.385000,90.000000,top +R33,1k,-48.895000,32.385000,90.000000,top +R34,1k,-43.815000,32.385000,90.000000,top +R35,1k,-38.735000,32.385000,90.000000,top +R36,1k,-52.705000,133.985000,0.000000,top +R37,1k,-28.575000,32.385000,90.000000,top +R38,1k,-72.390000,124.460000,270.000000,top +R39,1k,-47.625000,49.530000,0.000000,top +R40,1k,-47.625000,46.355000,0.000000,top +U4,MC33816,-17.653000,54.356000,90.000000,top +Y1,1MHz,-33.020000,45.339000,0.000000,top diff --git a/hardware/Common_Rail_MC33816/gerbers/create_cpl_jlc_from_KC-pos.bat b/hardware/Common_Rail_MC33816/gerbers/create_cpl_jlc_from_KC-pos.bat new file mode 100644 index 0000000000..f4ae259a23 --- /dev/null +++ b/hardware/Common_Rail_MC33816/gerbers/create_cpl_jlc_from_KC-pos.bat @@ -0,0 +1,2 @@ +python jlc_kicad_tools/KC-POS_to_JLC.py Common_Rail_MC33816_R0.3.2 +pause diff --git a/hardware/Common_Rail_MC33816/gerbers/jlc_kicad_tools/KC-POS_to_JLC-DRAFT.py b/hardware/Common_Rail_MC33816/gerbers/jlc_kicad_tools/KC-POS_to_JLC-DRAFT.py new file mode 100644 index 0000000000..8c2aa523b6 --- /dev/null +++ b/hardware/Common_Rail_MC33816/gerbers/jlc_kicad_tools/KC-POS_to_JLC-DRAFT.py @@ -0,0 +1,173 @@ +#!/usr/bin/env python3 +# Copyright (C) 2019 Matthew Lai +# +# This file is part of JLC Kicad Tools. +# +# JLC Kicad Tools is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# JLC Kicad Tools is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with JLC Kicad Tools. If not, see . + +import os +import re +import sys +import argparse +import logging +import errno + +import tkinter as tk +from tkinter import filedialog +import getpass + +root = tk.Tk() +root.withdraw() + +user = getpass.getuser() +file_name = filedialog.askopenfilename(initialdir=os.getcwd(), initialfile='68_vag_PNP_R0.1-top-pos.csv',title = "choose your file",filetypes = (("all files","*.*"),("CSV","*.csv"))) + + +print ('filename = ' + file_name) + +# JLC requires columns to be named a certain way. +HEADER_REPLACEMENT_TABLE={ + "Ref": "Designator", + "Val": "Val", + "Package": "PackageReference", + "PosX": "Mid X", + "PosY": "Mid Y", + "Rot": "Rotation", + "Side": "Layer", +} + +ROW_REPLACEMENT_TABLE={ + "TopLayer": "Top", + "BottomLayer": "Bottom", +} + +def ReadDB(filename): + db = {} + with open(filename) as csvfile: + reader = csv.reader(csvfile, delimiter=',') + for row in reader: + if row[0] == "Footprint pattern": + continue + else: + db[re.compile(row[0])] = int(row[1]) + logging.info("Read {} rules from {}".format(len(db), filename)) + return db + +def FixRotations(input_filename, output_filename, db): + with open(input_filename) as csvfile: + reader = csv.reader(csvfile, delimiter=',') + writer = csv.writer(open(output_filename, 'w', newline=''), delimiter=',') + package_index = None + rotation_index = None + for row in reader: + if not package_index: + # This is the first row. Find "Package" and "Rot" column indices. + for i in range(len(row)): + if row[i] == "Package": + package_index = i + elif row[i] == "Rot": + rotation_index = i + if package_index is None: + logging.warning("Failed to find 'Package' column in the csv file") + return False + if rotation_index is None: + logging.warning("Failed to find 'Rot' column in the csv file") + return False + # Replace column names with labels JLC wants. + for i in range(len(row)): + if row[i] in HEADER_REPLACEMENT_TABLE: + row[i] = HEADER_REPLACEMENT_TABLE[row[i]] + else: + for pattern, correction in db.items(): + if pattern.match(row[package_index]): + logging.info("Footprint {} matched {}. Applying {} deg correction" + .format(row[package_index], pattern.pattern, correction)) + row[rotation_index] = "{0:.0f}".format((float(row[rotation_index]) + correction) % 360) + break + for i in range(len(row)): + if row[i] in ROW_REPLACEMENT_TABLE: + row[i] = ROW_REPLACEMENT_TABLE[row[i]] + del row[package_index] + writer.writerow(row) + return True + +DEFAULT_DB_PATH="cpl_KC-to-JLC-rotations_db.csv" + +def main(): + parser = argparse.ArgumentParser(formatter_class=argparse.RawDescriptionHelpFormatter, description='Generates BOM and CPL in CSV fashion to be used in JLCPCB Assembly Service', prog='generate_jlc_files') + parser.add_argument('project_dir', metavar='INPUT_DIRECTORY', type=os.path.abspath, help='Directory of KiCad project. Name should match KiCad project name.') + parser.add_argument('-d', '--database', metavar='DATABASE', type=str, help='Filename of database', default=os.path.join(os.path.dirname(__file__), DEFAULT_DB_PATH)) + verbosity = parser.add_argument_group('verbosity arguments') + verbosity.add_argument('-v', '--verbose', help='Increases log verbosity for each occurrence', dest='verbose_count', action="count", default=0) + verbosity.add_argument('--warn-no-lcsc-partnumber', help='Enable warning output if lcsc part number is not found', dest='warn_no_partnumber', action='store_true') + parser.add_argument('--assume-same-lcsc-partnumber', help='Assume same lcsc partnumber for all components of a group', action='store_true', dest='assume_same_lcsc_partnumber') + parser.add_argument('-o', '--output', metavar='OUTPUT_DIRECTORY', dest='output_dir', type=os.path.abspath, help='Output directory. Default: INPUT_DIRECTORY') + + #if (len(sys.argv) == 1): + # parser.print_help() + # sys.exit() + print ("debug120") + # Parse arguments + opts = parser.parse_args(sys.argv[1:]) + + # Default log level is WARNING + logging.basicConfig(format="%(message)s", level=max(logging.WARNING - opts.verbose_count * 10, logging.NOTSET)) + + if not os.path.isdir(opts.project_dir): + logging.error("Failed to open project directory: {}".format(opts.project_dir)) + return errno.ENOENT + print ("debug130") + # Set default output directory + if opts.output_dir == None: + opts.output_dir = opts.project_dir + + if not os.path.isdir(opts.output_dir): + logging.info("Creating output directory {}".format(opts.output_dir)) + os.mkdir(opts.output_dir) + print ("debug138") + project_name = os.path.basename(opts.project_dir) + logging.debug("Project name is '%s'.", project_name) + #cpl_filename = project_name + "-top-pos.csv" + print ("debug 142 " + project_name + "-top-pos.csv") + cpl_filename = file_name + cpl_path = None + + for dir_name, subdir_list, file_list in os.walk(opts.project_dir): + for file_name in file_list: + if file_name == cpl_filename: + cpl_path = os.path.join(dir_name, file_name) + cpl_path = file_name + + if cpl_path is None: + logging.error(( + "Failed to find CPL file: {} in {} (and sub-directories). " + "Run 'File -> Fabrication Outputs -> Footprint Position (.pos) File' in Pcbnew. " + "Settings: 'CSV', 'mm', 'single file for board'.").format(cpl_filename, opts.project_dir)) + return errno.ENOENT + + logging.info("CPL file found at: {}".format(cpl_path)) + + cpl_output_path = os.path.join(opts.output_dir, project_name + "_JLC_CPL.csv") + + db = ReadDB(opts.database) + if FixRotations(cpl_path, cpl_output_path, db): + logging.info("JLC CPL file written to: {}".format(cpl_output_path)) + else: + return errno.EINVAL + + return 0 + +if __name__ == '__main__': + sys.exit(main()) + \ No newline at end of file diff --git a/hardware/Common_Rail_MC33816/gerbers/jlc_kicad_tools/KC-POS_to_JLC.py b/hardware/Common_Rail_MC33816/gerbers/jlc_kicad_tools/KC-POS_to_JLC.py new file mode 100644 index 0000000000..594f297874 --- /dev/null +++ b/hardware/Common_Rail_MC33816/gerbers/jlc_kicad_tools/KC-POS_to_JLC.py @@ -0,0 +1,162 @@ +#!/usr/bin/env python3 +# Copyright (C) 2019 Matthew Lai +# +# This file is part of JLC Kicad Tools. +# +# JLC Kicad Tools is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# JLC Kicad Tools is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with JLC Kicad Tools. If not, see . + +import os +import re +import sys +import argparse +import logging +import errno + +import csv +import re +import sys +import logging + +# JLC requires columns to be named a certain way. +HEADER_REPLACEMENT_TABLE={ + "Ref": "Designator", + "Val": "Val", + "Package": "PackageReference", + "PosX": "Mid X", + "PosY": "Mid Y", + "Rot": "Rotation", + "Side": "Layer", +} + +ROW_REPLACEMENT_TABLE={ + "TopLayer": "Top", + "BottomLayer": "Bottom", +} + +def ReadDB(filename): + db = {} + with open(filename) as csvfile: + reader = csv.reader(csvfile, delimiter=',') + for row in reader: + if row[0] == "Footprint pattern": + continue + else: + db[re.compile(row[0])] = int(row[1]) + logging.info("Read {} rules from {}".format(len(db), filename)) + return db + +def FixRotations(input_filename, output_filename, db): + with open(input_filename) as csvfile: + reader = csv.reader(csvfile, delimiter=',') + writer = csv.writer(open(output_filename, 'w', newline=''), delimiter=',') + package_index = None + rotation_index = None + for row in reader: + if not package_index: + # This is the first row. Find "Package" and "Rot" column indices. + for i in range(len(row)): + if row[i] == "Package": + package_index = i + elif row[i] == "Rot": + rotation_index = i + if package_index is None: + logging.warning("Failed to find 'Package' column in the csv file") + return False + if rotation_index is None: + logging.warning("Failed to find 'Rot' column in the csv file") + return False + # Replace column names with labels JLC wants. + for i in range(len(row)): + if row[i] in HEADER_REPLACEMENT_TABLE: + row[i] = HEADER_REPLACEMENT_TABLE[row[i]] + else: + for pattern, correction in db.items(): + if pattern.match(row[package_index]): + logging.info("Footprint {} matched {}. Applying {} deg correction" + .format(row[package_index], pattern.pattern, correction)) + row[rotation_index] = "{0:.0f}".format((float(row[rotation_index]) + correction) % 360) + break + for i in range(len(row)): + if row[i] in ROW_REPLACEMENT_TABLE: + row[i] = ROW_REPLACEMENT_TABLE[row[i]] + del row[package_index] + writer.writerow(row) + return True + +DEFAULT_DB_PATH="cpl_KC-to-JLC-rotations_db.csv" + +def main(): + parser = argparse.ArgumentParser(formatter_class=argparse.RawDescriptionHelpFormatter, description='Generates BOM and CPL in CSV fashion to be used in JLCPCB Assembly Service', prog='generate_jlc_files') + parser.add_argument('project_dir', metavar='INPUT_DIRECTORY', type=os.path.abspath, help='Directory of KiCad project. Name should match KiCad project name.') + parser.add_argument('-d', '--database', metavar='DATABASE', type=str, help='Filename of database', default=os.path.join(os.path.dirname(__file__), DEFAULT_DB_PATH)) + verbosity = parser.add_argument_group('verbosity arguments') + verbosity.add_argument('-v', '--verbose', help='Increases log verbosity for each occurrence', dest='verbose_count', action="count", default=0) + verbosity.add_argument('--warn-no-lcsc-partnumber', help='Enable warning output if lcsc part number is not found', dest='warn_no_partnumber', action='store_true') + parser.add_argument('--assume-same-lcsc-partnumber', help='Assume same lcsc partnumber for all components of a group', action='store_true', dest='assume_same_lcsc_partnumber') + parser.add_argument('-o', '--output', metavar='OUTPUT_DIRECTORY', dest='output_dir', type=os.path.abspath, help='Output directory. Default: INPUT_DIRECTORY') + + if (len(sys.argv) == 1): + parser.print_help() + sys.exit() + + # Parse arguments + opts = parser.parse_args(sys.argv[1:]) + + # Default log level is WARNING + logging.basicConfig(format="%(message)s", level=max(logging.WARNING - opts.verbose_count * 10, logging.NOTSET)) + + if not os.path.isdir(opts.project_dir): + logging.error("Failed to open project directory: {}".format(opts.project_dir)) + return errno.ENOENT + + # Set default output directory + if opts.output_dir == None: + opts.output_dir = opts.project_dir + + if not os.path.isdir(opts.output_dir): + logging.info("Creating output directory {}".format(opts.output_dir)) + os.mkdir(opts.output_dir) + + project_name = os.path.basename(opts.project_dir) + logging.debug("Project name is '%s'.", project_name) + cpl_filename = project_name + "-top-pos.csv" + cpl_path = None + + for dir_name, subdir_list, file_list in os.walk(opts.project_dir): + for file_name in file_list: + if file_name == cpl_filename: + cpl_path = os.path.join(dir_name, file_name) + + if cpl_path is None: + logging.error(( + "Failed to find CPL file: {} in {} (and sub-directories). " + "Run 'File -> Fabrication Outputs -> Footprint Position (.pos) File' in Pcbnew. " + "Settings: 'CSV', 'mm', 'single file for board'.").format(cpl_filename, opts.project_dir)) + return errno.ENOENT + + logging.info("CPL file found at: {}".format(cpl_path)) + + cpl_output_path = os.path.join(opts.output_dir, project_name + "_JLC_CPL.csv") + + db = ReadDB(opts.database) + if FixRotations(cpl_path, cpl_output_path, db): + logging.info("JLC CPL file written to: {}".format(cpl_output_path)) + else: + return errno.EINVAL + + return 0 + +if __name__ == '__main__': + sys.exit(main()) + \ No newline at end of file diff --git a/hardware/Common_Rail_MC33816/gerbers/jlc_kicad_tools/__init__.py b/hardware/Common_Rail_MC33816/gerbers/jlc_kicad_tools/__init__.py new file mode 100644 index 0000000000..1f356cc57b --- /dev/null +++ b/hardware/Common_Rail_MC33816/gerbers/jlc_kicad_tools/__init__.py @@ -0,0 +1 @@ +__version__ = '1.0.0' diff --git a/hardware/Common_Rail_MC33816/gerbers/jlc_kicad_tools/cpl_KC-to-JLC-rotations_db.csv b/hardware/Common_Rail_MC33816/gerbers/jlc_kicad_tools/cpl_KC-to-JLC-rotations_db.csv new file mode 100644 index 0000000000..c037baa579 --- /dev/null +++ b/hardware/Common_Rail_MC33816/gerbers/jlc_kicad_tools/cpl_KC-to-JLC-rotations_db.csv @@ -0,0 +1,10 @@ +"Footprint pattern","Correction" +"CP_Elec_8x10.5",180 +"SOT-23",180 +"D_SMC",180 +"R_Array_Convex_4x0603",270 +"SOT-223-3_TabPin2",180 +"SO-8_5.3x6.2mm_P1.27mm-150+208",90 +"TSSOP-14_4.4x5mm_P0.65mm",180 +"SOIC-8_3.9x4.9mm_P1.27mm",90 +"TO-252-2Lead",90 diff --git a/hardware/Common_Rail_MC33816/gerbers/jlc_kicad_tools/jlc_lib/__init__.py b/hardware/Common_Rail_MC33816/gerbers/jlc_kicad_tools/jlc_lib/__init__.py new file mode 100644 index 0000000000..e69de29bb2 diff --git a/hardware/Common_Rail_MC33816/gerbers/jlc_kicad_tools/jlc_lib/cpl_fix_rotations.py b/hardware/Common_Rail_MC33816/gerbers/jlc_kicad_tools/jlc_lib/cpl_fix_rotations.py new file mode 100644 index 0000000000..21834d1071 --- /dev/null +++ b/hardware/Common_Rail_MC33816/gerbers/jlc_kicad_tools/jlc_lib/cpl_fix_rotations.py @@ -0,0 +1,76 @@ +# Copyright (C) 2019 Matthew Lai +# +# This file is part of JLC Kicad Tools. +# +# JLC Kicad Tools is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# JLC Kicad Tools is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with JLC Kicad Tools. If not, see . + +import csv +import re +import sys +import logging + +# JLC requires columns to be named a certain way. +HEADER_REPLACEMENT_TABLE={ + "Ref": "Designator", + "PosX": "Mid X", + "PosY": "Mid Y", + "Rot": "Rotation", + "Side": "Layer" +} + +def ReadDB(filename): + db = {} + with open(filename) as csvfile: + reader = csv.reader(csvfile, delimiter=',') + for row in reader: + if row[0] == "Footprint pattern": + continue + else: + db[re.compile(row[0])] = int(row[1]) + logging.info("Read {} rules from {}".format(len(db), filename)) + return db + +def FixRotations(input_filename, output_filename, db): + with open(input_filename) as csvfile: + reader = csv.reader(csvfile, delimiter=',') + writer = csv.writer(open(output_filename, 'w', newline=''), delimiter=',') + package_index = None + rotation_index = None + for row in reader: + if not package_index: + # This is the first row. Find "Package" and "Rot" column indices. + for i in range(len(row)): + if row[i] == "Package": + package_index = i + elif row[i] == "Rot": + rotation_index = i + if package_index is None: + logging.warning("Failed to find 'Package' column in the csv file") + return False + if rotation_index is None: + logging.warning("Failed to find 'Rot' column in the csv file") + return False + # Replace column names with labels JLC wants. + for i in range(len(row)): + if row[i] in HEADER_REPLACEMENT_TABLE: + row[i] = HEADER_REPLACEMENT_TABLE[row[i]] + else: + for pattern, correction in db.items(): + if pattern.match(row[package_index]): + logging.info("Footprint {} matched {}. Applying {} deg correction" + .format(row[package_index], pattern.pattern, correction)) + row[rotation_index] = "{0:.6f}".format((float(row[rotation_index]) + correction) % 360) + break + writer.writerow(row) + return True diff --git a/hardware/Common_Rail_MC33816/gerbers/jlc_kicad_tools/jlc_lib/generate_bom.py b/hardware/Common_Rail_MC33816/gerbers/jlc_kicad_tools/jlc_lib/generate_bom.py new file mode 100644 index 0000000000..f0c1153acf --- /dev/null +++ b/hardware/Common_Rail_MC33816/gerbers/jlc_kicad_tools/jlc_lib/generate_bom.py @@ -0,0 +1,107 @@ +# Copyright (C) 2019 Matthew Lai +# Copyright (C) 1992-2019 Kicad Developers Team +# +# This file is part of JLC Kicad Tools. +# +# JLC Kicad Tools is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# JLC Kicad Tools is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with JLC Kicad Tools. If not, see . + +from jlc_kicad_tools.jlc_lib import kicad_netlist_reader +import csv +import re +import logging + +LCSC_PART_NUMBER_MATCHER=re.compile('^C[0-9]+$') + +def GenerateBOM(input_filename, output_filename, opts): + net = kicad_netlist_reader.netlist(input_filename) + + try: + f = open(output_filename, mode='w', encoding='utf-8') + except IOError: + logging.error("Failed to open file for writing: {}".format(output_filename)) + return False + + out = csv.writer(f, lineterminator='\n', delimiter=',', quotechar='\"', + quoting=csv.QUOTE_ALL) + + out.writerow(['Comment', 'Designator', 'Footprint', 'LCSC Part #']) + + grouped = net.groupComponents() + + num_groups_found = 0 + for group in grouped: + refs = [] + lcsc_part_numbers = set() + lcsc_part_numbers_none_found = False + footprints = set() + + for component in group: + refs.append(component.getRef()) + c = component + lcsc_part_number = None + + # Get the field name for the LCSC part number. + for field_name in c.getFieldNames(): + field_value = c.getField(field_name) + + if LCSC_PART_NUMBER_MATCHER.match(field_value): + lcsc_part_number = field_value + + if lcsc_part_number: + lcsc_part_numbers.add(lcsc_part_number) + else: + lcsc_part_numbers_none_found = True + + if c.getFootprint() != '': + footprints.add(c.getFootprint()) + + # Check part numbers for uniqueness + if len(lcsc_part_numbers) == 0: + if opts.warn_no_partnumber: + logging.warning("No LCSC part number found for components {}".format(",".join(refs))) + continue + elif len(lcsc_part_numbers) != 1: + logging.error("Components {components} from same group have different LCSC part numbers: {partnumbers}".format( + components = ", ".join(refs), + partnumbers = ", ".join(lcsc_part_numbers))) + return False + lcsc_part_number = list(lcsc_part_numbers)[0] + + if (not opts.assume_same_lcsc_partnumber) and (lcsc_part_numbers_none_found): + logging.error("Components {components} from same group do not all have LCSC part number {partnumber} set. Use --assume-same-lcsc-partnumber to ignore.".format( + components = ", ".join(refs), + partnumber = lcsc_part_number)) + return False + + # Check footprints for uniqueness + if (len(footprints) == 0): + logging.error("No footprint found for components {}".format(",".join(refs))) + return False + if len(footprints) != 1: + logging.error("Components {components} from same group have different foot prints: {footprints}".format( + components = ", ".join(refs), + footprints = ", ".join(footprints))) + return False + footprint = list(footprints)[0] + + # They don't seem to like ':' in footprint names. + footprint = footprint[(footprint.find(':') + 1):] + + # Fill in the component groups common data + out.writerow([c.getValue(), ",".join(refs), footprint, lcsc_part_number]) + num_groups_found += 1 + + logging.info("{} component groups found from BOM file.".format(num_groups_found)) + + return True diff --git a/hardware/Common_Rail_MC33816/gerbers/jlc_kicad_tools/jlc_lib/kicad_netlist_reader.py b/hardware/Common_Rail_MC33816/gerbers/jlc_kicad_tools/jlc_lib/kicad_netlist_reader.py new file mode 100644 index 0000000000..6cdf529928 --- /dev/null +++ b/hardware/Common_Rail_MC33816/gerbers/jlc_kicad_tools/jlc_lib/kicad_netlist_reader.py @@ -0,0 +1,794 @@ +# Copyright (C) 1992-2019 Kicad Developers Team +# +# This file is part of JLC Kicad Tools. +# +# JLC Kicad Tools is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# JLC Kicad Tools is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with JLC Kicad Tools. If not, see . + +# +# KiCad python module for interpreting generic netlists which can be used +# to generate Bills of materials, etc. +# +# Remember these files use UTF8 encoding +# +# No string formatting is used on purpose as the only string formatting that +# is current compatible with python 2.4+ to 3.0+ is the '%' method, and that +# is due to be deprecated in 3.0+ soon +# + +""" + @package + Helper module for interpreting generic netlist and build custom + bom generators or netlists in foreign format +""" + + +from __future__ import print_function +import sys +import xml.sax as sax +import re +import pdb +import logging + +#--------------------------------------------------------------------- + +# excluded_fields is a list of regular expressions. If any one matches a field +# from either a component or a libpart, then that will not be included as a +# column in the BOM. Otherwise all columns from all used libparts and components +# will be unionized and will appear. Some fields are impossible to blacklist, such +# as Ref, Value, Footprint, and Datasheet. Additionally Qty and Item are supplied +# unconditionally as columns, and may not be removed. +excluded_fields = [ + #'Price@1000' + ] + + +# You may exlude components from the BOM by either: +# +# 1) adding a custom field named "Installed" to your components and filling it +# with a value of "NU" (Normally Uninstalled). +# See netlist.getInterestingComponents(), or +# +# 2) blacklisting it in any of the three following lists: + + +# regular expressions which match component 'Reference' fields of components that +# are to be excluded from the BOM. +excluded_references = [ + 'TP[0-9]+' # all test points + ] + + +# regular expressions which match component 'Value' fields of components that +# are to be excluded from the BOM. +excluded_values = [ + 'MOUNTHOLE', + 'SCOPETEST', + 'MOUNT_HOLE', + 'SOLDER_BRIDGE.*' + ] + + +# regular expressions which match component 'Footprint' fields of components that +# are to be excluded from the BOM. +excluded_footprints = [ + #'MOUNTHOLE' + ] + +#-------------------------------------------------------------------- + + +class xmlElement(): + """xml element which can represent all nodes of the netlist tree. It can be + used to easily generate various output formats by propogating format + requests to children recursively. + """ + def __init__(self, name, parent=None): + self.name = name + self.attributes = {} + self.parent = parent + self.chars = "" + self.children = [] + + def __str__(self): + """String representation of this netlist element + + """ + return self.name + "[" + self.chars + "]" + " attr_count:" + str(len(self.attributes)) + + def formatXML(self, nestLevel=0, amChild=False): + """Return this element formatted as XML + + Keywords: + nestLevel -- increases by one for each level of nesting. + amChild -- If set to True, the start of document is not returned. + + """ + s = "" + + indent = "" + for i in range(nestLevel): + indent += " " + + if not amChild: + s = "\n" + + s += indent + "<" + self.name + for a in self.attributes: + s += " " + a + "=\"" + self.attributes[a] + "\"" + + if (len(self.chars) == 0) and (len(self.children) == 0): + s += "/>" + else: + s += ">" + self.chars + + for c in self.children: + s += "\n" + s += c.formatXML(nestLevel+1, True) + + if (len(self.children) > 0): + s += "\n" + indent + + if (len(self.children) > 0) or (len(self.chars) > 0): + s += "" + + return s + + def formatHTML(self, amChild=False): + """Return this element formatted as HTML + + Keywords: + amChild -- If set to True, the start of document is not returned + + """ + s = "" + + if not amChild: + s = """ + + + + + + + + """ + + s += "\n" + + for c in self.children: + s += c.formatHTML(True) + + if not amChild: + s += """
" + self.name + "
" + self.chars + "
    " + for a in self.attributes: + s += "
  • " + a + " = " + self.attributes[a] + "
    • " + + s += "
+ + """ + + return s + + def addAttribute(self, attr, value): + """Add an attribute to this element""" + if type(value) != str: value = value.encode('utf-8') + self.attributes[attr] = value + + def setAttribute(self, attr, value): + """Set an attributes value - in fact does the same thing as add + attribute + + """ + self.attributes[attr] = value + + def setChars(self, chars): + """Set the characters for this element""" + self.chars = chars + + def addChars(self, chars): + """Add characters (textual value) to this element""" + self.chars += chars + + def addChild(self, child): + """Add a child element to this element""" + self.children.append(child) + return self.children[len(self.children) - 1] + + def getParent(self): + """Get the parent of this element (Could be None)""" + return self.parent + + def getChild(self, name): + """Returns the first child element named 'name' + + Keywords: + name -- The name of the child element to return""" + for child in self.children: + if child.name == name: + return child + return None + + def getChildren(self, name=None): + if name: + # return _all_ children named "name" + ret = [] + for child in self.children: + if child.name == name: + ret.append(child) + return ret + else: + return self.children + + def get(self, elemName, attribute="", attrmatch=""): + """Return the text data for either an attribute or an xmlElement + """ + if (self.name == elemName): + if attribute != "": + try: + if attrmatch != "": + if self.attributes[attribute] == attrmatch: + ret = self.chars + if type(ret) != str: ret = ret.encode('utf-8') + return ret + else: + ret = self.attributes[attribute] + if type(ret) != str: ret = ret.encode('utf-8') + return ret + except AttributeError: + ret = "" + if type(ret) != str: ret = ret.encode('utf-8') + return ret + else: + ret = self.chars + if type(ret) != str: ret = ret.encode('utf-8') + return ret + + for child in self.children: + ret = child.get(elemName, attribute, attrmatch) + if ret != "": + if type(ret) != str: ret = ret.encode('utf-8') + return ret + + ret = "" + if type(ret) != str: ret = ret.encode('utf-8') + return ret + + + +class libpart(): + """Class for a library part, aka 'libpart' in the xml netlist file. + (Components in eeschema are instantiated from library parts.) + This part class is implemented by wrapping an xmlElement with accessors. + This xmlElement instance is held in field 'element'. + """ + def __init__(self, xml_element): + # + self.element = xml_element + + #def __str__(self): + # simply print the xmlElement associated with this part + #return str(self.element) + + def getLibName(self): + return self.element.get("libpart", "lib") + + def getPartName(self): + return self.element.get("libpart", "part") + + def getDescription(self): + return self.element.get("description") + + def getField(self, name): + return self.element.get("field", "name", name) + + def getFieldNames(self): + """Return a list of field names in play for this libpart. + """ + fieldNames = [] + fields = self.element.getChild('fields') + if fields: + for f in fields.getChildren(): + fieldNames.append( f.get('field','name') ) + return fieldNames + + def getDatasheet(self): + return self.getField("Datasheet") + + def getFootprint(self): + return self.getField("Footprint") + + def getAliases(self): + """Return a list of aliases or None""" + aliases = self.element.getChild("aliases") + if aliases: + ret = [] + children = aliases.getChildren() + # grab the text out of each child: + for child in children: + ret.append( child.get("alias") ) + return ret + return None + + +class comp(): + """Class for a component, aka 'comp' in the xml netlist file. + This component class is implemented by wrapping an xmlElement instance + with accessors. The xmlElement is held in field 'element'. + """ + + def __init__(self, xml_element): + self.element = xml_element + self.libpart = None + + # Set to true when this component is included in a component group + self.grouped = False + + def __eq__(self, other): + """ Equivalency operator, remember this can be easily overloaded + 2 components are equivalent ( i.e. can be grouped + if they have same value and same footprint + + Override the component equivalence operator must be done before + loading the netlist, otherwise all components will have the original + equivalency operator. + + You have to define a comparison module (for instance named myEqu) + and add the line; + kicad_netlist_reader.comp.__eq__ = myEqu + in your bom generator script before calling the netliste reader by something like: + net = kicad_netlist_reader.netlist(sys.argv[1]) + """ + result = False + if self.getValue() == other.getValue(): + if self.getFootprint() == other.getFootprint(): + result = True + return result + + def setLibPart(self, part): + self.libpart = part + + def getLibPart(self): + return self.libpart + + def getPartName(self): + return self.element.get("libsource", "part") + + def getLibName(self): + return self.element.get("libsource", "lib") + + def setValue(self, value): + """Set the value of this component""" + v = self.element.getChild("value") + if v: + v.setChars(value) + + def getValue(self): + return self.element.get("value") + + def getField(self, name, libraryToo=True): + """Return the value of a field named name. The component is first + checked for the field, and then the components library part is checked + for the field. If the field doesn't exist in either, an empty string is + returned + + Keywords: + name -- The name of the field to return the value for + libraryToo -- look in the libpart's fields for the same name if not found + in component itself + """ + + field = self.element.get("field", "name", name) + if field == "" and libraryToo and self.libpart: + field = self.libpart.getField(name) + return field + + def getFieldNames(self): + """Return a list of field names in play for this component. Mandatory + fields are not included, and they are: Value, Footprint, Datasheet, Ref. + The netlist format only includes fields with non-empty values. So if a field + is empty, it will not be present in the returned list. + """ + fieldNames = [] + fields = self.element.getChild('fields') + if fields: + for f in fields.getChildren(): + fieldNames.append( f.get('field','name') ) + return fieldNames + + def getRef(self): + return self.element.get("comp", "ref") + + def getFootprint(self, libraryToo=True): + ret = self.element.get("footprint") + if ret == "" and libraryToo and self.libpart: + ret = self.libpart.getFootprint() + return ret + + def getDatasheet(self, libraryToo=True): + ret = self.element.get("datasheet") + if ret == "" and libraryToo and self.libpart: + ret = self.libpart.getDatasheet() + return ret + + def getTimestamp(self): + return self.element.get("tstamp") + + def getDescription(self): + return self.element.get("libsource", "description") + + +class netlist(): + """ Kicad generic netlist class. Generally loaded from a kicad generic + netlist file. Includes several helper functions to ease BOM creating + scripts + + """ + def __init__(self, fname=""): + """Initialiser for the genericNetlist class + + Keywords: + fname -- The name of the generic netlist file to open (Optional) + + """ + self.design = None + self.components = [] + self.libparts = [] + self.libraries = [] + self.nets = [] + + # The entire tree is loaded into self.tree + self.tree = [] + + self._curr_element = None + + # component blacklist regexs, made from exluded_* above. + self.excluded_references = [] + self.excluded_values = [] + self.excluded_footprints = [] + + if fname != "": + self.load(fname) + + def addChars(self, content): + """Add characters to the current element""" + self._curr_element.addChars(content) + + def addElement(self, name): + """Add a new kicad generic element to the list""" + if self._curr_element == None: + self.tree = xmlElement(name) + self._curr_element = self.tree + else: + self._curr_element = self._curr_element.addChild( + xmlElement(name, self._curr_element)) + + # If this element is a component, add it to the components list + if self._curr_element.name == "comp": + self.components.append(comp(self._curr_element)) + + # Assign the design element + if self._curr_element.name == "design": + self.design = self._curr_element + + # If this element is a library part, add it to the parts list + if self._curr_element.name == "libpart": + self.libparts.append(libpart(self._curr_element)) + + # If this element is a net, add it to the nets list + if self._curr_element.name == "net": + self.nets.append(self._curr_element) + + # If this element is a library, add it to the libraries list + if self._curr_element.name == "library": + self.libraries.append(self._curr_element) + + return self._curr_element + + def endDocument(self): + """Called when the netlist document has been fully parsed""" + # When the document is complete, the library parts must be linked to + # the components as they are seperate in the tree so as not to + # duplicate library part information for every component + for c in self.components: + for p in self.libparts: + if p.getLibName() == c.getLibName(): + if p.getPartName() == c.getPartName(): + c.setLibPart(p) + break + else: + aliases = p.getAliases() + if aliases and self.aliasMatch( c.getPartName(), aliases ): + c.setLibPart(p) + break; + + if not c.getLibPart(): + logging.error('Missing libpart for ref {}: {}:{}'.format(c.getRef(), c.getLibName(), c.getPartName() )) + + + def aliasMatch(self, partName, aliasList): + for alias in aliasList: + if partName == alias: + return True + return False + + def endElement(self): + """End the current element and switch to its parent""" + self._curr_element = self._curr_element.getParent() + + def getDate(self): + """Return the date + time string generated by the tree creation tool""" + return self.design.get("date") + + def getSource(self): + """Return the source string for the design""" + return self.design.get("source") + + def getTool(self): + """Return the tool string which was used to create the netlist tree""" + return self.design.get("tool") + + def gatherComponentFieldUnion(self, components=None): + """Gather the complete 'set' of unique component fields, fields found in any component. + """ + if not components: + components=self.components + + s = set() + for c in components: + s.update( c.getFieldNames() ) + + # omit anything matching any regex in excluded_fields + ret = set() + for field in s: + exclude = False + for rex in excluded_fields: + if re.match( rex, field ): + exclude = True + break + if not exclude: + ret.add(field) + + return ret # this is a python 'set' + + def gatherLibPartFieldUnion(self): + """Gather the complete 'set' of part fields, fields found in any part. + """ + s = set() + for p in self.libparts: + s.update( p.getFieldNames() ) + + # omit anything matching any regex in excluded_fields + ret = set() + for field in s: + exclude = False + for rex in excluded_fields: + if re.match( rex, field ): + exclude = True + break + if not exclude: + ret.add(field) + + return ret # this is a python 'set' + + def getInterestingComponents(self): + """Return a subset of all components, those that should show up in the BOM. + Omit those that should not, by consulting the blacklists: + excluded_values, excluded_refs, and excluded_footprints, which hold one + or more regular expressions. If any of the the regular expressions match + the corresponding field's value in a component, then the component is exluded. + """ + + # pre-compile all the regex expressions: + del self.excluded_references[:] + del self.excluded_values[:] + del self.excluded_footprints[:] + + for rex in excluded_references: + self.excluded_references.append( re.compile( rex ) ) + + for rex in excluded_values: + self.excluded_values.append( re.compile( rex ) ) + + for rex in excluded_footprints: + self.excluded_footprints.append( re.compile( rex ) ) + + # the subset of components to return, considered as "interesting". + ret = [] + + # run each component thru a series of tests, if it passes all, then add it + # to the interesting list 'ret'. + for c in self.components: + exclude = False + if not exclude: + for refs in self.excluded_references: + if refs.match(c.getRef()): + exclude = True + break; + if not exclude: + for vals in self.excluded_values: + if vals.match(c.getValue()): + exclude = True + break; + if not exclude: + for mods in self.excluded_footprints: + if mods.match(c.getFootprint()): + exclude = True + break; + + if not exclude: + # This is a fairly personal way to flag DNS (Do Not Stuff). NU for + # me means Normally Uninstalled. You can 'or in' another expression here. + if c.getField( "Installed" ) == 'NU': + exclude = True + + if not exclude: + ret.append(c) + + # The key to sort the components in the BOM + # This sorts using a natural sorting order (e.g. 100 after 99), and if it wasn't used + # the normal sort would place 100 before 99 since it only would look at the first digit. + def sortKey( str ): + return [ int(t) if t.isdigit() else t.lower() + for t in re.split( '(\d+)', str ) ] + + ret.sort(key=lambda g: sortKey(g.getRef())) + + return ret + + + def groupComponents(self, components = None): + """Return a list of component lists. Components are grouped together + when the value, library and part identifiers match. + + Keywords: + components -- is a list of components, typically an interesting subset + of all components, or None. If None, then all components are looked at. + """ + if not components: + components = self.components + + groups = [] + + # Make sure to start off will all components ungrouped to begin with + for c in components: + c.grouped = False + + # Group components based on the value, library and part identifiers + for c in components: + if c.grouped == False: + c.grouped = True + newgroup = [] + newgroup.append(c) + + # Check every other ungrouped component against this component + # and add to the group as necessary + for ci in components: + if ci.grouped == False and ci == c: + newgroup.append(ci) + ci.grouped = True + + # Add the new component group to the groups list + groups.append(newgroup) + + # The key to sort the components in the BOM + # This sorts using a natural sorting order (e.g. 100 after 99), and if it wasn't used + # the normal sort would place 100 before 99 since it only would look at the first digit. + def sortKey( str ): + return [ int(t) if t.isdigit() else t.lower() + for t in re.split( '(\d+)', str ) ] + + for g in groups: + g = sorted(g, key=lambda g: sortKey(g.getRef())) + + # Finally, sort the groups to order the references alphabetically + groups = sorted(groups, key=lambda group: sortKey(group[0].getRef())) + + return groups + + def getGroupField(self, group, field): + """Return the whatever is known about the given field by consulting each + component in the group. If any of them know something about the property/field, + then return that first non-blank value. + """ + for c in group: + ret = c.getField(field, False) + if ret != '': + return ret + + libpart = group[0].getLibPart() + if not libpart: + return '' + + return libpart.getField(field) + + def getGroupFootprint(self, group): + """Return the whatever is known about the Footprint by consulting each + component in the group. If any of them know something about the Footprint, + then return that first non-blank value. + """ + for c in group: + ret = c.getFootprint() + if ret != "": + return ret + return group[0].getLibPart().getFootprint() + + def getGroupDatasheet(self, group): + """Return the whatever is known about the Datasheet by consulting each + component in the group. If any of them know something about the Datasheet, + then return that first non-blank value. + """ + for c in group: + ret = c.getDatasheet() + if ret != "": + return ret + + if len(group) > 0: + return group[0].getLibPart().getDatasheet() + else: + logging.error("NULL!") + return '' + + def formatXML(self): + """Return the whole netlist formatted in XML""" + return self.tree.formatXML() + + def formatHTML(self): + """Return the whole netlist formatted in HTML""" + return self.tree.formatHTML() + + def load(self, fname): + """Load a kicad generic netlist + + Keywords: + fname -- The name of the generic netlist file to open + + """ + try: + self._reader = sax.make_parser() + self._reader.setContentHandler(_gNetReader(self)) + self._reader.parse(fname) + except IOError as e: + logging.error("{}: {}".format(__file__, e)) + sys.exit(-1) + + + +class _gNetReader(sax.handler.ContentHandler): + """SAX kicad generic netlist content handler - passes most of the work back + to the 'netlist' class which builds a complete tree in RAM for the design + + """ + def __init__(self, aParent): + self.parent = aParent + + def startElement(self, name, attrs): + """Start of a new XML element event""" + element = self.parent.addElement(name) + + for name in attrs.getNames(): + element.addAttribute(name, attrs.getValue(name)) + + def endElement(self, name): + self.parent.endElement() + + def characters(self, content): + # Ignore erroneous white space - ignoreableWhitespace does not get rid + # of the need for this! + if not content.isspace(): + self.parent.addChars(content) + + def endDocument(self): + """End of the XML document event""" + self.parent.endDocument()