diff --git a/firmware/tunerstudio/rusefi.ini b/firmware/tunerstudio/rusefi.ini
index 0786429800..045ac906ef 100644
--- a/firmware/tunerstudio/rusefi.ini
+++ b/firmware/tunerstudio/rusefi.ini
@@ -82,7 +82,7 @@ enable2ndByteCanID = false
 
 ; see PAGE_0_SIZE in C source code    
 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Wed Jun 26 19:41:07 EDT 2019
+; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Fri Jun 28 17:50:38 EDT 2019
 
 pageSize            = 20000
 page = 1
@@ -2534,9 +2534,9 @@ cmd_set_engine_type_default					= "w\x00\x31\x00\x00"
 		field = "Fuel level", 						fuelLevelSensor
 		field = "Flex fuel",							flexFuelSensor
 		field = "Clutch down pin",						clutchDownPin
-		fiedl = "Clutch down inverted",					clutchDownPinInverted
+		field = "Clutch down inverted",					clutchDownPinInverted
 		field = "Clutch up pin",						clutchUpPin
-		fiedl = "Clutch up inverted",					clutchUpPinInverted
+		field = "Clutch up inverted",					clutchUpPinInverted
 		field = "Brake pedal pin",						brakePedalPin
 		field = "A/C switch",							acSwitchAdc
 
@@ -2902,7 +2902,7 @@ cmd_set_engine_type_default					= "w\x00\x31\x00\x00"
 	dialog = idleSettings, "", yAxis
 		field = "Idle IAC control mode",					idleMode
 		field = "use ETB for idle",						useETBforIdleControl
-		fiedl = "ETB Idle range",						etbIdleThrottleRange, {useETBforIdleControl == 1}
+		field = "ETB Idle range",						etbIdleThrottleRange, {useETBforIdleControl == 1}
 		field = "Use separate Ignition Table for idle",	useSeparateAdvanceForIdle
 		field = "Use separate VE Table for idle",		useSeparateVeForIdle
 		field = "Use separate IAC Table For Coasting",	useIacTableForCoasting, {idleMode == 0}
diff --git a/firmware/tunerstudio/rusefi.input b/firmware/tunerstudio/rusefi.input
index 2a604e08d9..bad6416cd8 100644
--- a/firmware/tunerstudio/rusefi.input
+++ b/firmware/tunerstudio/rusefi.input
@@ -1563,9 +1563,9 @@ cmd_set_engine_type_default					= "w\x00\x31\x00\x00"
 		field = "Fuel level", 						fuelLevelSensor
 		field = "Flex fuel",							flexFuelSensor
 		field = "Clutch down pin",						clutchDownPin
-		fiedl = "Clutch down inverted",					clutchDownPinInverted
+		field = "Clutch down inverted",					clutchDownPinInverted
 		field = "Clutch up pin",						clutchUpPin
-		fiedl = "Clutch up inverted",					clutchUpPinInverted
+		field = "Clutch up inverted",					clutchUpPinInverted
 		field = "Brake pedal pin",						brakePedalPin
 		field = "A/C switch",							acSwitchAdc
 
@@ -1931,7 +1931,7 @@ cmd_set_engine_type_default					= "w\x00\x31\x00\x00"
 	dialog = idleSettings, "", yAxis
 		field = "Idle IAC control mode",					idleMode
 		field = "use ETB for idle",						useETBforIdleControl
-		fiedl = "ETB Idle range",						etbIdleThrottleRange, {useETBforIdleControl == 1}
+		field = "ETB Idle range",						etbIdleThrottleRange, {useETBforIdleControl == 1}
 		field = "Use separate Ignition Table for idle",	useSeparateAdvanceForIdle
 		field = "Use separate VE Table for idle",		useSeparateVeForIdle
 		field = "Use separate IAC Table For Coasting",	useIacTableForCoasting, {idleMode == 0}
diff --git a/firmware/tunerstudio/rusefi_frankenso.ini b/firmware/tunerstudio/rusefi_frankenso.ini
index 1dd7dc2c5c..6542cc3e85 100644
--- a/firmware/tunerstudio/rusefi_frankenso.ini
+++ b/firmware/tunerstudio/rusefi_frankenso.ini
@@ -82,7 +82,7 @@ enable2ndByteCanID = false
 
 ; see PAGE_0_SIZE in C source code    
 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Wed Jun 26 19:41:13 EDT 2019
+; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Fri Jun 28 17:50:43 EDT 2019
 
 pageSize            = 20000
 page = 1
@@ -2534,9 +2534,9 @@ cmd_set_engine_type_default					= "w\x00\x31\x00\x00"
 		field = "Fuel level", 						fuelLevelSensor
 		field = "Flex fuel",							flexFuelSensor
 		field = "Clutch down pin",						clutchDownPin
-		fiedl = "Clutch down inverted",					clutchDownPinInverted
+		field = "Clutch down inverted",					clutchDownPinInverted
 		field = "Clutch up pin",						clutchUpPin
-		fiedl = "Clutch up inverted",					clutchUpPinInverted
+		field = "Clutch up inverted",					clutchUpPinInverted
 		field = "Brake pedal pin",						brakePedalPin
 		field = "A/C switch",							acSwitchAdc
 
@@ -2902,7 +2902,7 @@ cmd_set_engine_type_default					= "w\x00\x31\x00\x00"
 	dialog = idleSettings, "", yAxis
 		field = "Idle IAC control mode",					idleMode
 		field = "use ETB for idle",						useETBforIdleControl
-		fiedl = "ETB Idle range",						etbIdleThrottleRange, {useETBforIdleControl == 1}
+		field = "ETB Idle range",						etbIdleThrottleRange, {useETBforIdleControl == 1}
 		field = "Use separate Ignition Table for idle",	useSeparateAdvanceForIdle
 		field = "Use separate VE Table for idle",		useSeparateVeForIdle
 		field = "Use separate IAC Table For Coasting",	useIacTableForCoasting, {idleMode == 0}
diff --git a/firmware/tunerstudio/rusefi_microrusefi.ini b/firmware/tunerstudio/rusefi_microrusefi.ini
index 38032eaa1d..ee442b5574 100644
--- a/firmware/tunerstudio/rusefi_microrusefi.ini
+++ b/firmware/tunerstudio/rusefi_microrusefi.ini
@@ -82,7 +82,7 @@ enable2ndByteCanID = false
 
 ; see PAGE_0_SIZE in C source code    
 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Wed Jun 26 19:41:10 EDT 2019
+; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Fri Jun 28 17:50:41 EDT 2019
 
 pageSize            = 20000
 page = 1
@@ -2527,9 +2527,9 @@ cmd_set_engine_type_default					= "w\x00\x31\x00\x00"
 		field = "Fuel level", 						fuelLevelSensor
 		field = "Flex fuel",							flexFuelSensor
 		field = "Clutch down pin",						clutchDownPin
-		fiedl = "Clutch down inverted",					clutchDownPinInverted
+		field = "Clutch down inverted",					clutchDownPinInverted
 		field = "Clutch up pin",						clutchUpPin
-		fiedl = "Clutch up inverted",					clutchUpPinInverted
+		field = "Clutch up inverted",					clutchUpPinInverted
 		field = "Brake pedal pin",						brakePedalPin
 		field = "A/C switch",							acSwitchAdc
 
@@ -2887,7 +2887,7 @@ cmd_set_engine_type_default					= "w\x00\x31\x00\x00"
 	dialog = idleSettings, "", yAxis
 		field = "Idle IAC control mode",					idleMode
 		field = "use ETB for idle",						useETBforIdleControl
-		fiedl = "ETB Idle range",						etbIdleThrottleRange, {useETBforIdleControl == 1}
+		field = "ETB Idle range",						etbIdleThrottleRange, {useETBforIdleControl == 1}
 		field = "Use separate Ignition Table for idle",	useSeparateAdvanceForIdle
 		field = "Use separate VE Table for idle",		useSeparateVeForIdle
 		field = "Use separate IAC Table For Coasting",	useIacTableForCoasting, {idleMode == 0}
diff --git a/firmware/tunerstudio/rusefi_prometheus.ini b/firmware/tunerstudio/rusefi_prometheus.ini
index 00bd707f07..209f5225e2 100644
--- a/firmware/tunerstudio/rusefi_prometheus.ini
+++ b/firmware/tunerstudio/rusefi_prometheus.ini
@@ -82,7 +82,7 @@ enable2ndByteCanID = false
 
 ; see PAGE_0_SIZE in C source code    
 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Wed Jun 26 19:41:15 EDT 2019
+; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Fri Jun 28 17:50:45 EDT 2019
 
 pageSize            = 20000
 page = 1
@@ -2530,9 +2530,9 @@ cmd_set_engine_type_default					= "w\x00\x31\x00\x00"
 		field = "Fuel level", 						fuelLevelSensor
 		field = "Flex fuel",							flexFuelSensor
 		field = "Clutch down pin",						clutchDownPin
-		fiedl = "Clutch down inverted",					clutchDownPinInverted
+		field = "Clutch down inverted",					clutchDownPinInverted
 		field = "Clutch up pin",						clutchUpPin
-		fiedl = "Clutch up inverted",					clutchUpPinInverted
+		field = "Clutch up inverted",					clutchUpPinInverted
 		field = "Brake pedal pin",						brakePedalPin
 		field = "A/C switch",							acSwitchAdc
 
@@ -2898,7 +2898,7 @@ cmd_set_engine_type_default					= "w\x00\x31\x00\x00"
 	dialog = idleSettings, "", yAxis
 		field = "Idle IAC control mode",					idleMode
 		field = "use ETB for idle",						useETBforIdleControl
-		fiedl = "ETB Idle range",						etbIdleThrottleRange, {useETBforIdleControl == 1}
+		field = "ETB Idle range",						etbIdleThrottleRange, {useETBforIdleControl == 1}
 		field = "Use separate Ignition Table for idle",	useSeparateAdvanceForIdle
 		field = "Use separate VE Table for idle",		useSeparateVeForIdle
 		field = "Use separate IAC Table For Coasting",	useIacTableForCoasting, {idleMode == 0}