diff --git a/firmware/.cproject b/firmware/.cproject
index cd8c5ebff2..b27ed18760 100644
--- a/firmware/.cproject
+++ b/firmware/.cproject
@@ -319,7 +319,7 @@
-
+
@@ -375,23 +375,23 @@
-
+
-
+
-
+
-
-
-
-
+
+
+
+
-
+
@@ -423,7 +423,7 @@
-
+
@@ -433,22 +433,22 @@
-
-
+
+
-
+
-
-
-
-
+
+
+
+
-
+
@@ -490,8 +490,105 @@
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
-
+
diff --git a/firmware/config/stm32f1egt/STM32F103xB.ld b/firmware/config/stm32f1egt/STM32F103xB.ld
new file mode 100644
index 0000000000..0babc301bf
--- /dev/null
+++ b/firmware/config/stm32f1egt/STM32F103xB.ld
@@ -0,0 +1,149 @@
+/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/*
+ * ST32F103xB memory setup.
+ */
+__main_stack_size__ = 0x0400;
+__process_stack_size__ = 0x0400;
+
+MEMORY
+{
+ flash : org = 0x08000000, len = 128k
+ ram : org = 0x20000000, len = 20k
+}
+
+__ram_start__ = ORIGIN(ram);
+__ram_size__ = LENGTH(ram);
+__ram_end__ = __ram_start__ + __ram_size__;
+
+ENTRY(ResetHandler)
+
+SECTIONS
+{
+ . = 0;
+ _text = .;
+
+ startup : ALIGN(16) SUBALIGN(16)
+ {
+ KEEP(*(vectors))
+ } > flash
+
+ constructors : ALIGN(4) SUBALIGN(4)
+ {
+ PROVIDE(__init_array_start = .);
+ KEEP(*(SORT(.init_array.*)))
+ KEEP(*(.init_array))
+ PROVIDE(__init_array_end = .);
+ } > flash
+
+ destructors : ALIGN(4) SUBALIGN(4)
+ {
+ PROVIDE(__fini_array_start = .);
+ KEEP(*(.fini_array))
+ KEEP(*(SORT(.fini_array.*)))
+ PROVIDE(__fini_array_end = .);
+ } > flash
+
+ .text : ALIGN(16) SUBALIGN(16)
+ {
+ *(.text.startup.*)
+ *(.text)
+ *(.text.*)
+ *(.rodata)
+ *(.rodata.*)
+ *(.glue_7t)
+ *(.glue_7)
+ *(.gcc*)
+ } > flash
+
+ .ARM.extab :
+ {
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ } > flash
+
+ .ARM.exidx : {
+ PROVIDE(__exidx_start = .);
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ PROVIDE(__exidx_end = .);
+ } > flash
+
+ .eh_frame_hdr :
+ {
+ *(.eh_frame_hdr)
+ } > flash
+
+ .eh_frame : ONLY_IF_RO
+ {
+ *(.eh_frame)
+ } > flash
+
+ .textalign : ONLY_IF_RO
+ {
+ . = ALIGN(8);
+ } > flash
+
+ . = ALIGN(4);
+ _etext = .;
+ _textdata = _etext;
+
+ .stacks :
+ {
+ . = ALIGN(8);
+ __main_stack_base__ = .;
+ . += __main_stack_size__;
+ . = ALIGN(8);
+ __main_stack_end__ = .;
+ __process_stack_base__ = .;
+ __main_thread_stack_base__ = .;
+ . += __process_stack_size__;
+ . = ALIGN(8);
+ __process_stack_end__ = .;
+ __main_thread_stack_end__ = .;
+ } > ram
+
+ .data :
+ {
+ . = ALIGN(4);
+ PROVIDE(_data = .);
+ *(.data)
+ . = ALIGN(4);
+ *(.data.*)
+ . = ALIGN(4);
+ *(.ramtext)
+ . = ALIGN(4);
+ PROVIDE(_edata = .);
+ } > ram AT > flash
+
+ .bss :
+ {
+ . = ALIGN(4);
+ PROVIDE(_bss_start = .);
+ *(.bss)
+ . = ALIGN(4);
+ *(.bss.*)
+ . = ALIGN(4);
+ *(COMMON)
+ . = ALIGN(4);
+ PROVIDE(_bss_end = .);
+ } > ram
+}
+
+PROVIDE(end = .);
+_end = .;
+
+__heap_base__ = _end;
+__heap_end__ = __ram_end__;
diff --git a/firmware/config/stm32f1egt/chconf.h b/firmware/config/stm32f1egt/chconf.h
new file mode 100644
index 0000000000..f4682cb9d8
--- /dev/null
+++ b/firmware/config/stm32f1egt/chconf.h
@@ -0,0 +1,531 @@
+/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ * setting also defines the system tick time unit.
+ */
+#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__)
+#define CH_FREQUENCY 1000
+#endif
+
+/**
+ * @brief Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ * threads before preemption occurs. Setting this value to zero
+ * disables the preemption for threads with equal priority and the
+ * round robin becomes cooperative. Note that higher priority
+ * threads can still preempt, the kernel is always preemptive.
+ *
+ * @note Disabling the round robin preemption makes the kernel more compact
+ * and generally faster.
+ */
+#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__)
+#define CH_TIME_QUANTUM 20
+#endif
+
+/**
+ * @brief Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ * then the whole available RAM is used. The core memory is made
+ * available to the heap allocator and/or can be used directly through
+ * the simplified core memory allocator.
+ *
+ * @note In order to let the OS manage the whole RAM the linker script must
+ * provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note Requires @p CH_USE_MEMCORE.
+ */
+#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__)
+#define CH_MEMCORE_SIZE 0
+#endif
+
+/**
+ * @brief Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ * does not spawn the idle thread automatically. The application has
+ * then the responsibility to do one of the following:
+ * - Spawn a custom idle thread at priority @p IDLEPRIO.
+ * - Change the main() thread priority to @p IDLEPRIO then enter
+ * an endless loop. In this scenario the @p main() thread acts as
+ * the idle thread.
+ * .
+ * @note Unless an idle thread is spawned the @p main() thread must not
+ * enter a sleep state.
+ */
+#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__)
+#define CH_NO_IDLE_THREAD FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ * is used when two possible implementations exist.
+ *
+ * @note This is not related to the compiler optimization options.
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__)
+#define CH_OPTIMIZE_SPEED TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__)
+#define CH_USE_REGISTRY TRUE
+#endif
+
+/**
+ * @brief Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__)
+#define CH_USE_WAITEXIT TRUE
+#endif
+
+/**
+ * @brief Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__)
+#define CH_USE_SEMAPHORES TRUE
+#endif
+
+/**
+ * @brief Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ * priority rather than in FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special requirements.
+ * @note Requires @p CH_USE_SEMAPHORES.
+ */
+#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__)
+#define CH_USE_SEMAPHORES_PRIORITY FALSE
+#endif
+
+/**
+ * @brief Atomic semaphore API.
+ * @details If enabled then the semaphores the @p chSemSignalWait() API
+ * is included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_USE_SEMAPHORES.
+ */
+#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__)
+#define CH_USE_SEMSW TRUE
+#endif
+
+/**
+ * @brief Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__)
+#define CH_USE_MUTEXES TRUE
+#endif
+
+/**
+ * @brief Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_USE_MUTEXES.
+ */
+#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__)
+#define CH_USE_CONDVARS TRUE
+#endif
+
+/**
+ * @brief Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ * specification are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_USE_CONDVARS.
+ */
+#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__)
+#define CH_USE_CONDVARS_TIMEOUT TRUE
+#endif
+
+/**
+ * @brief Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__)
+#define CH_USE_EVENTS TRUE
+#endif
+
+/**
+ * @brief Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ * are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_USE_EVENTS.
+ */
+#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__)
+#define CH_USE_EVENTS_TIMEOUT TRUE
+#endif
+
+/**
+ * @brief Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__)
+#define CH_USE_MESSAGES TRUE
+#endif
+
+/**
+ * @brief Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ * FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special requirements.
+ * @note Requires @p CH_USE_MESSAGES.
+ */
+#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__)
+#define CH_USE_MESSAGES_PRIORITY FALSE
+#endif
+
+/**
+ * @brief Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ * included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_USE_SEMAPHORES.
+ */
+#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__)
+#define CH_USE_MAILBOXES TRUE
+#endif
+
+/**
+ * @brief I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__)
+#define CH_USE_QUEUES TRUE
+#endif
+
+/**
+ * @brief Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__)
+#define CH_USE_MEMCORE TRUE
+#endif
+
+/**
+ * @brief Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or
+ * @p CH_USE_SEMAPHORES.
+ * @note Mutexes are recommended.
+ */
+#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__)
+#define CH_USE_HEAP TRUE
+#endif
+
+/**
+ * @brief C-runtime allocator.
+ * @details If enabled the the heap allocator APIs just wrap the C-runtime
+ * @p malloc() and @p free() functions.
+ *
+ * @note The default is @p FALSE.
+ * @note Requires @p CH_USE_HEAP.
+ * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the
+ * appropriate documentation.
+ */
+#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__)
+#define CH_USE_MALLOC_HEAP FALSE
+#endif
+
+/**
+ * @brief Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__)
+#define CH_USE_MEMPOOLS TRUE
+#endif
+
+/**
+ * @brief Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_USE_WAITEXIT.
+ * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS.
+ */
+#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__)
+#define CH_USE_DYNAMIC TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ * at runtime.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__)
+#define CH_DBG_SYSTEM_STATE_CHECK FALSE
+#endif
+
+/**
+ * @brief Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ * parameters are activated.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__)
+#define CH_DBG_ENABLE_CHECKS FALSE
+#endif
+
+/**
+ * @brief Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ * activated. This includes consistency checks inside the kernel,
+ * runtime anomalies and port-defined checks.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__)
+#define CH_DBG_ENABLE_ASSERTS FALSE
+#endif
+
+/**
+ * @brief Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ * activated.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__)
+#define CH_DBG_ENABLE_TRACE FALSE
+#endif
+
+/**
+ * @brief Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note The default is @p FALSE.
+ * @note The stack check is performed in a architecture/port dependent way.
+ * It may not be implemented or some ports.
+ * @note The default failure mode is to halt the system with the global
+ * @p panic_msg variable set to @p NULL.
+ */
+#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__)
+#define CH_DBG_ENABLE_STACK_CHECK FALSE
+#endif
+
+/**
+ * @brief Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ * value when a thread is created. This can be useful for the
+ * runtime measurement of the used stack.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__)
+#define CH_DBG_FILL_THREADS FALSE
+#endif
+
+/**
+ * @brief Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p Thread structure that
+ * counts the system ticks occurred while executing the thread.
+ *
+ * @note The default is @p TRUE.
+ * @note This debug option is defaulted to TRUE because it is required by
+ * some test cases into the test suite.
+ */
+#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__)
+#define CH_DBG_THREADS_PROFILING TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Threads descriptor structure extension.
+ * @details User fields added to the end of the @p Thread structure.
+ */
+#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__)
+#define THREAD_EXT_FIELDS \
+ /* Add threads custom fields here.*/
+#endif
+
+/**
+ * @brief Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note It is invoked from within @p chThdInit() and implicitly from all
+ * the threads creation APIs.
+ */
+#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__)
+#define THREAD_EXT_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+#endif
+
+/**
+ * @brief Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note It is inserted into lock zone.
+ * @note It is also invoked when the threads simply return in order to
+ * terminate.
+ */
+#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__)
+#define THREAD_EXT_EXIT_HOOK(tp) { \
+ /* Add threads finalization code here.*/ \
+}
+#endif
+
+/**
+ * @brief Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__)
+#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \
+ /* System halt code here.*/ \
+}
+#endif
+
+/**
+ * @brief Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__)
+#define IDLE_LOOP_HOOK() { \
+ /* Idle loop code here.*/ \
+}
+#endif
+
+/**
+ * @brief System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ * after processing the virtual timers queue.
+ */
+#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__)
+#define SYSTEM_TICK_EVENT_HOOK() { \
+ /* System tick event code here.*/ \
+}
+#endif
+
+/**
+ * @brief System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ * the system is halted.
+ */
+#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__)
+#define SYSTEM_HALT_HOOK() { \
+ /* System halt code here.*/ \
+}
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h). */
+/*===========================================================================*/
+
+#endif /* _CHCONF_H_ */
+
+/** @} */
diff --git a/firmware/config/stm32f1egt/efifeatures.h b/firmware/config/stm32f1egt/efifeatures.h
new file mode 100644
index 0000000000..44936d9398
--- /dev/null
+++ b/firmware/config/stm32f1egt/efifeatures.h
@@ -0,0 +1,63 @@
+/**
+ * @file efifeatures.h
+ *
+ * @brief In this header we can configure which modules are used for EGT2CAN firmware.
+ *
+ * @date Dec 23, 2014
+ * @author Andrey Belomutskiy, (c) 2012-2014
+ */
+
+#ifndef EFIFEATURES_H_
+#define EFIFEATURES_H_
+
+#define DL_OUTPUT_BUFFER 128
+
+#define hal_lld_get_counter_value() DWT_CYCCNT
+
+#define EFI_USE_UART_FOR_CONSOLE TRUE
+
+#define EFI_CONSOLE_UART_DEVICE (&SD1)
+
+#define EFI_CONSOLE_TX_PORT GPIOC
+#define EFI_CONSOLE_TX_PIN 10
+#define EFI_CONSOLE_RX_PORT GPIOC
+#define EFI_CONSOLE_RX_PIN 11
+#define EFI_CONSOLE_AF 7
+
+
+#define LED_ERROR_PORT GPIOD
+#define LED_ERROR_PIN 3
+
+#define LED_COMMUNICATION_PORT GPIOD
+#define LED_COMMUNICATION_PIN 4
+
+#define SERIAL_SPEED 115200
+/**
+ * This macros is used to hide pieces of the code from unit tests, so it only makes sense in folders exposed to the tests project.
+ * This macros is NOT about taking out logging in general.
+ */
+#define EFI_PROD_CODE FALSE
+
+#define CCM_OPTIONAL
+
+#define EFI_EGT TRUE
+
+#define EFI_UNIT_TEST FALSE
+
+#define CONSOLE_MODE_SWITCH_PORT GPIOB
+#define CONSOLE_MODE_SWITCH_PIN 1
+
+#define EFI_MAX_31855 TRUE
+
+#define CONSOLE_MAX_ACTIONS 32
+
+#define CONFIG_RESET_SWITCH_PORT GPIOD
+#define CONFIG_RESET_SWITCH_PIN 6
+
+/**
+ * This is the size of the MemoryStream used by chvprintf
+ */
+#define INTERMEDIATE_LOGGING_BUFFER_SIZE 256
+
+
+#endif /* EFIFEATURES_H_ */
diff --git a/firmware/config/stm32f1egt/halconf.h b/firmware/config/stm32f1egt/halconf.h
new file mode 100644
index 0000000000..027657ea17
--- /dev/null
+++ b/firmware/config/stm32f1egt/halconf.h
@@ -0,0 +1,312 @@
+/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/halconf.h
+ * @brief HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ * various device drivers from your application. You may also use
+ * this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief Enables the TM subsystem.
+ */
+#if !defined(HAL_USE_TM) || defined(__DOXYGEN__)
+#define HAL_USE_TM TRUE
+#endif
+
+/**
+ * @brief Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL TRUE
+#endif
+
+/**
+ * @brief Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC FALSE
+#endif
+
+/**
+ * @brief Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN FALSE
+#endif
+
+/**
+ * @brief Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT FALSE
+#endif
+
+/**
+ * @brief Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT FALSE
+#endif
+
+/**
+ * @brief Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C FALSE
+#endif
+
+/**
+ * @brief Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU FALSE
+#endif
+
+/**
+ * @brief Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC FALSE
+#endif
+
+/**
+ * @brief Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM FALSE
+#endif
+
+/**
+ * @brief Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC FALSE
+#endif
+
+/**
+ * @brief Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL TRUE
+#endif
+
+/**
+ * @brief Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB FALSE
+#endif
+
+/**
+ * @brief Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART FALSE
+#endif
+
+/**
+ * @brief Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY FALSE
+#endif
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ * This option is recommended also if the SPI driver does not
+ * use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Number of initialization attempts before rejecting the card.
+ * @note Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY 100
+#endif
+
+/**
+ * @brief Include support for MMC cards.
+ * @note MMC support is not yet implemented so this option must be kept
+ * at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT FALSE
+#endif
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ * default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE 38400
+#endif
+
+/**
+ * @brief Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ * buffers depending on the requirements of your application.
+ * @note The default is 64 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE 16
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/firmware/config/stm32f1egt/mcuconf.h b/firmware/config/stm32f1egt/mcuconf.h
new file mode 100644
index 0000000000..66a9c4e1e9
--- /dev/null
+++ b/firmware/config/stm32f1egt/mcuconf.h
@@ -0,0 +1,199 @@
+/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#define STM32F103_MCUCONF
+
+/*
+ * STM32F103 drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0 Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3 Lowest...Highest.
+ */
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT FALSE
+#define STM32_HSI_ENABLED TRUE
+#define STM32_LSI_ENABLED FALSE
+#define STM32_HSE_ENABLED FALSE
+#define STM32_LSE_ENABLED FALSE
+#define STM32_SW STM32_SW_PLL
+#define STM32_PLLSRC STM32_PLLSRC_HSI
+#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1
+#define STM32_PLLMUL_VALUE 12
+#define STM32_HPRE STM32_HPRE_DIV1
+#define STM32_PPRE1 STM32_PPRE1_DIV2
+#define STM32_PPRE2 STM32_PPRE2_DIV2
+#define STM32_ADCPRE STM32_ADCPRE_DIV4
+#define STM32_USB_CLOCK_REQUIRED TRUE
+#define STM32_USBPRE STM32_USBPRE_DIV1
+#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
+#define STM32_RTCSEL STM32_RTCSEL_NOCLOCK
+#define STM32_PVD_ENABLE FALSE
+#define STM32_PLS STM32_PLS_LEV0
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1 FALSE
+#define STM32_ADC_ADC1_DMA_PRIORITY 2
+#define STM32_ADC_ADC1_IRQ_PRIORITY 6
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1 FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY 11
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI18_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY 6
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1 FALSE
+#define STM32_GPT_USE_TIM2 FALSE
+#define STM32_GPT_USE_TIM3 FALSE
+#define STM32_GPT_USE_TIM4 FALSE
+#define STM32_GPT_USE_TIM5 FALSE
+#define STM32_GPT_USE_TIM8 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY 7
+#define STM32_GPT_TIM2_IRQ_PRIORITY 7
+#define STM32_GPT_TIM3_IRQ_PRIORITY 7
+#define STM32_GPT_TIM4_IRQ_PRIORITY 7
+#define STM32_GPT_TIM5_IRQ_PRIORITY 7
+#define STM32_GPT_TIM8_IRQ_PRIORITY 7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1 FALSE
+#define STM32_I2C_USE_I2C2 FALSE
+#define STM32_I2C_I2C1_IRQ_PRIORITY 5
+#define STM32_I2C_I2C2_IRQ_PRIORITY 5
+#define STM32_I2C_I2C1_DMA_PRIORITY 3
+#define STM32_I2C_I2C2_DMA_PRIORITY 3
+#define STM32_I2C_I2C1_DMA_ERROR_HOOK() chSysHalt()
+#define STM32_I2C_I2C2_DMA_ERROR_HOOK() chSysHalt()
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1 FALSE
+#define STM32_ICU_USE_TIM2 FALSE
+#define STM32_ICU_USE_TIM3 FALSE
+#define STM32_ICU_USE_TIM4 FALSE
+#define STM32_ICU_USE_TIM5 FALSE
+#define STM32_ICU_USE_TIM8 FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY 7
+#define STM32_ICU_TIM2_IRQ_PRIORITY 7
+#define STM32_ICU_TIM3_IRQ_PRIORITY 7
+#define STM32_ICU_TIM4_IRQ_PRIORITY 7
+#define STM32_ICU_TIM5_IRQ_PRIORITY 7
+#define STM32_ICU_TIM8_IRQ_PRIORITY 7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED FALSE
+#define STM32_PWM_USE_TIM1 FALSE
+#define STM32_PWM_USE_TIM2 FALSE
+#define STM32_PWM_USE_TIM3 FALSE
+#define STM32_PWM_USE_TIM4 FALSE
+#define STM32_PWM_USE_TIM5 FALSE
+#define STM32_PWM_USE_TIM8 FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY 7
+#define STM32_PWM_TIM2_IRQ_PRIORITY 7
+#define STM32_PWM_TIM3_IRQ_PRIORITY 7
+#define STM32_PWM_TIM4_IRQ_PRIORITY 7
+#define STM32_PWM_TIM5_IRQ_PRIORITY 7
+#define STM32_PWM_TIM8_IRQ_PRIORITY 7
+
+/*
+ * RTC driver system settings.
+ */
+#define STM32_RTC_IRQ_PRIORITY 15
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1 FALSE
+#define STM32_SERIAL_USE_USART2 TRUE
+#define STM32_SERIAL_USE_USART3 FALSE
+#define STM32_SERIAL_USE_UART4 FALSE
+#define STM32_SERIAL_USE_UART5 FALSE
+#define STM32_SERIAL_USART1_PRIORITY 12
+#define STM32_SERIAL_USART2_PRIORITY 12
+#define STM32_SERIAL_USART3_PRIORITY 12
+#define STM32_SERIAL_UART4_PRIORITY 12
+#define STM32_SERIAL_UART5_PRIORITY 12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1 FALSE
+#define STM32_SPI_USE_SPI2 FALSE
+#define STM32_SPI_USE_SPI3 FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY 1
+#define STM32_SPI_SPI2_DMA_PRIORITY 1
+#define STM32_SPI_SPI3_DMA_PRIORITY 1
+#define STM32_SPI_SPI1_IRQ_PRIORITY 10
+#define STM32_SPI_SPI2_IRQ_PRIORITY 10
+#define STM32_SPI_SPI3_IRQ_PRIORITY 10
+#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt()
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1 FALSE
+#define STM32_UART_USE_USART2 FALSE
+#define STM32_UART_USE_USART3 FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY 12
+#define STM32_UART_USART2_IRQ_PRIORITY 12
+#define STM32_UART_USART3_IRQ_PRIORITY 12
+#define STM32_UART_USART1_DMA_PRIORITY 0
+#define STM32_UART_USART2_DMA_PRIORITY 0
+#define STM32_UART_USART3_DMA_PRIORITY 0
+#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt()
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1 FALSE
+#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
+#define STM32_USB_USB1_HP_IRQ_PRIORITY 13
+#define STM32_USB_USB1_LP_IRQ_PRIORITY 14
+
diff --git a/firmware/hw_layer/serial_over_usb/usbconsole.c b/firmware/hw_layer/serial_over_usb/usbconsole.c
index c6d5632e45..a891fefb1d 100644
--- a/firmware/hw_layer/serial_over_usb/usbconsole.c
+++ b/firmware/hw_layer/serial_over_usb/usbconsole.c
@@ -8,7 +8,7 @@
#include "main.h"
-#if (EFI_PROD_CODE && EFI_USB_SERIAL) || defined(__DOXYGEN__)
+#if EFI_USB_SERIAL || defined(__DOXYGEN__)
#include "usbconsole.h"
#include "usbcfg.h"