HW CI has failed 11 times since Oct 2 #1849

Revert "ETB function config (#1831)"

This reverts commit af59c45a
This commit is contained in:
rusefillc 2020-10-03 22:00:00 -04:00
parent 7f6a831117
commit 367436454d
6 changed files with 20 additions and 100 deletions

View File

@ -172,8 +172,6 @@ bool EtbController::init(etb_function_e function, DcMotor *motor, pid_s *pidPara
m_pid.initPidClass(pidParameters); m_pid.initPidClass(pidParameters);
m_pedalMap = pedalMap; m_pedalMap = pedalMap;
reset();
return true; return true;
} }
@ -758,10 +756,6 @@ void setDefaultEtbParameters(DECLARE_CONFIG_PARAMETER_SIGNATURE) {
} }
} }
// Default is to run each throttle off its respective hbridge
engineConfiguration->etbFunctions[0] = ETB_Throttle1;
engineConfiguration->etbFunctions[1] = ETB_Throttle2;
engineConfiguration->etbFreq = DEFAULT_ETB_PWM_FREQUENCY; engineConfiguration->etbFreq = DEFAULT_ETB_PWM_FREQUENCY;
// voltage, not ADC like with TPS // voltage, not ADC like with TPS
@ -828,42 +822,29 @@ void doInitElectronicThrottle(DECLARE_ENGINE_PARAMETER_SIGNATURE) {
addConsoleActionI("etb_freq", setEtbFrequency); addConsoleActionI("etb_freq", setEtbFrequency);
#endif /* EFI_PROD_CODE */ #endif /* EFI_PROD_CODE */
// If you don't have a pedal we have no business here.
if (!Sensor::hasSensor(SensorType::AcceleratorPedalPrimary)) {
return;
}
pedal2tpsMap.init(config->pedalToTpsTable, config->pedalToTpsPedalBins, config->pedalToTpsRpmBins); pedal2tpsMap.init(config->pedalToTpsTable, config->pedalToTpsPedalBins, config->pedalToTpsRpmBins);
// TODO: remove etbActualCount engine->etbActualCount = Sensor::hasSensor(SensorType::Tps2) ? 2 : 1;
engine->etbActualCount = ETB_COUNT;
bool mustHaveEtbConfigured = Sensor::hasSensor(SensorType::AcceleratorPedalPrimary); for (int i = 0 ; i < engine->etbActualCount; i++) {
bool anyEtbConfigured = false;
for (int i = 0 ; i < ETB_COUNT; i++) {
auto motor = initDcMotor(i, CONFIG(etb_use_two_wires) PASS_ENGINE_PARAMETER_SUFFIX); auto motor = initDcMotor(i, CONFIG(etb_use_two_wires) PASS_ENGINE_PARAMETER_SUFFIX);
// If this motor is actually set up, init the etb // If this motor is actually set up, init the etb
if (motor) if (motor)
{ {
auto controller = engine->etbControllers[i]; // TODO: configure per-motor in config so wastegate/VW idle works
if (!controller) { auto func = i == 0 ? ETB_Throttle1 : ETB_Throttle2;
continue;
}
auto func = CONFIG(etbFunctions[i]); engine->etbControllers[i]->init(func, motor, &engineConfiguration->etb, &pedal2tpsMap);
anyEtbConfigured |= controller->init(func, motor, &engineConfiguration->etb, &pedal2tpsMap);
INJECT_ENGINE_REFERENCE(engine->etbControllers[i]); INJECT_ENGINE_REFERENCE(engine->etbControllers[i]);
} }
} }
if (!anyEtbConfigured) {
// It's not valid to have a PPS without any ETBs - check that at least one ETB was enabled along with the pedal
if (mustHaveEtbConfigured) {
firmwareError(OBD_PCM_Processor_Fault, "A pedal position sensor was configured, but no electronic throttles are configured.");
}
// Don't start the thread if no throttles are in use.
return;
}
#if 0 && ! EFI_UNIT_TEST #if 0 && ! EFI_UNIT_TEST
percent_t startupThrottlePosition = getTPS(PASS_ENGINE_PARAMETER_SIGNATURE); percent_t startupThrottlePosition = getTPS(PASS_ENGINE_PARAMETER_SIGNATURE);
if (absF(startupThrottlePosition - engineConfiguration->etbNeutralPosition) > STARTUP_NEUTRAL_POSITION_ERROR_THRESHOLD) { if (absF(startupThrottlePosition - engineConfiguration->etbNeutralPosition) > STARTUP_NEUTRAL_POSITION_ERROR_THRESHOLD) {
@ -877,6 +858,8 @@ void doInitElectronicThrottle(DECLARE_ENGINE_PARAMETER_SIGNATURE) {
} }
#endif /* EFI_UNIT_TEST */ #endif /* EFI_UNIT_TEST */
etbPidReset(PASS_ENGINE_PARAMETER_SIGNATURE);
#if !EFI_UNIT_TEST #if !EFI_UNIT_TEST
etbThread.Start(); etbThread.Start();
#endif #endif

View File

@ -236,10 +236,6 @@ void onUnlockHook(void) {
#endif /* ENABLE_PERF_TRACE */ #endif /* ENABLE_PERF_TRACE */
} }
#if EFI_SIMULATOR || EFI_UNIT_TEST
#include <stdexcept>
#endif
void firmwareError(obd_code_e code, const char *fmt, ...) { void firmwareError(obd_code_e code, const char *fmt, ...) {
#if EFI_PROD_CODE #if EFI_PROD_CODE
if (hasFirmwareErrorFlag) if (hasFirmwareErrorFlag)
@ -289,7 +285,7 @@ void firmwareError(obd_code_e code, const char *fmt, ...) {
printf("\r\n"); printf("\r\n");
#if EFI_SIMULATOR || EFI_UNIT_TEST #if EFI_SIMULATOR || EFI_UNIT_TEST
throw std::logic_error(fmt); throw "fatal error";
#endif /* EFI_SIMULATOR */ #endif /* EFI_SIMULATOR */
#endif #endif
} }

View File

@ -951,8 +951,7 @@ custom maf_sensor_type_e 4 bits, S32, @OFFSET@, [0:1], @@maf_sensor_type_e_enum@
output_pin_e[TCU_SOLENOID_COUNT iterate] tcu_solenoid; output_pin_e[TCU_SOLENOID_COUNT iterate] tcu_solenoid;
custom etb_function_e 1 bits, U08, @OFFSET@, [0:2], "None", "Throttle 1", "Throttle 2", "Idle Valve", "Wastegate" uint8_t[2] solenoidPadding;;"units", 1, 0, -20, 100, 0
etb_function_e[ETB_COUNT iterate] etbFunctions
spi_device_e drv8860spiDevice; spi_device_e drv8860spiDevice;
brain_pin_e drv8860_cs; brain_pin_e drv8860_cs;

View File

@ -3044,8 +3044,6 @@ cmd_set_engine_type_default = "@@TS_IO_TEST_COMMAND_char@@\x00\x31\x00\x00"
field = "https://rusefi.com/s/etb" field = "https://rusefi.com/s/etb"
field = "Detailed status in console", isVerboseETB field = "Detailed status in console", isVerboseETB
field = "Disable ETB Motor", pauseEtbControl field = "Disable ETB Motor", pauseEtbControl
field = "H-Bridge #1 function", etbFunctions1
field = "H-Bridge #2 function", etbFunctions2
; we need the term about stepper idle in here, because there's a bug in TS that you can't have different visibility ; we need the term about stepper idle in here, because there's a bug in TS that you can't have different visibility
; criteria for the same panel when used in multiple places ; criteria for the same panel when used in multiple places
panel = hbridgeHardware, { throttlePedalPositionAdcChannel != @@ADC_CHANNEL_NONE@@ || (useStepperIdle && useHbridges) } panel = hbridgeHardware, { throttlePedalPositionAdcChannel != @@ADC_CHANNEL_NONE@@ || (useStepperIdle && useHbridges) }

View File

@ -27,34 +27,9 @@ TEST(etb, initializationNoPedal) {
engine->etbControllers[i] = &mocks[i]; engine->etbControllers[i] = &mocks[i];
} }
EXPECT_CALL(mocks[0], init(ETB_Throttle1, _, _, _)).WillOnce(Return(false)); // We expect no throttle init stuff to be called - lack of pedal should disable ETB
EXPECT_CALL(mocks[1], init(ETB_Throttle2, _, _, _)).WillOnce(Return(false));
// This shouldn't throw, since no throttles are configured, but no pedal is configured either doInitElectronicThrottle(PASS_ENGINE_PARAMETER_SIGNATURE);
EXPECT_NO_FATAL_ERROR(doInitElectronicThrottle(PASS_ENGINE_PARAMETER_SIGNATURE));
}
TEST(etb, initializationMissingThrottle) {
StrictMock<MockEtb> mocks[ETB_COUNT];
WITH_ENGINE_TEST_HELPER(TEST_ENGINE);
for (int i = 0; i < ETB_COUNT; i++) {
engine->etbControllers[i] = &mocks[i];
}
engineConfiguration->etbFunctions[0] = ETB_None;
engineConfiguration->etbFunctions[1] = ETB_None;
EXPECT_CALL(mocks[0], init(ETB_None, _, _, _)).WillOnce(Return(false));
EXPECT_CALL(mocks[1], init(ETB_None, _, _, _)).WillOnce(Return(false));
// Must have a sensor configured before init
Sensor::setMockValue(SensorType::AcceleratorPedal, 0);
Sensor::setMockValue(SensorType::AcceleratorPedalPrimary, 0);
// This should throw: a pedal is configured but no throttles
EXPECT_FATAL_ERROR(doInitElectronicThrottle(PASS_ENGINE_PARAMETER_SIGNATURE));
} }
TEST(etb, initializationSingleThrottle) { TEST(etb, initializationSingleThrottle) {
@ -70,39 +45,11 @@ TEST(etb, initializationSingleThrottle) {
Sensor::setMockValue(SensorType::AcceleratorPedal, 0); Sensor::setMockValue(SensorType::AcceleratorPedal, 0);
Sensor::setMockValue(SensorType::AcceleratorPedalPrimary, 0); Sensor::setMockValue(SensorType::AcceleratorPedalPrimary, 0);
engineConfiguration->etbFunctions[0] = ETB_Throttle1;
engineConfiguration->etbFunctions[1] = ETB_None;
// Expect mock0 to be init as throttle 1, and PID params // Expect mock0 to be init as throttle 1, and PID params
EXPECT_CALL(mocks[0], init(ETB_Throttle1, _, &engineConfiguration->etb, Ne(nullptr))).WillOnce(Return(true)); EXPECT_CALL(mocks[0], init(ETB_Throttle1, _, &engineConfiguration->etb, Ne(nullptr))).WillOnce(Return(true));
EXPECT_CALL(mocks[0], reset);
// Expect mock1 to be init as none // We do not expect throttle #2 to be initialized
EXPECT_CALL(mocks[1], init(ETB_None, _, _, _)).WillOnce(Return(true));
doInitElectronicThrottle(PASS_ENGINE_PARAMETER_SIGNATURE);
}
TEST(etb, initializationSingleThrottleInSecondSlot) {
StrictMock<MockEtb> mocks[ETB_COUNT];
WITH_ENGINE_TEST_HELPER(TEST_ENGINE);
for (int i = 0; i < ETB_COUNT; i++) {
engine->etbControllers[i] = &mocks[i];
}
// Must have a sensor configured before init
Sensor::setMockValue(SensorType::AcceleratorPedal, 0);
Sensor::setMockValue(SensorType::AcceleratorPedalPrimary, 0);
engineConfiguration->etbFunctions[0] = ETB_None;
engineConfiguration->etbFunctions[1] = ETB_Throttle1;
// Expect mock0 to be init as none
EXPECT_CALL(mocks[0], init(ETB_None, _, _, _)).WillOnce(Return(true));
// Expect mock1 to be init as throttle 1, and PID params
EXPECT_CALL(mocks[1], init(ETB_Throttle1, _, &engineConfiguration->etb, Ne(nullptr))).WillOnce(Return(true));
doInitElectronicThrottle(PASS_ENGINE_PARAMETER_SIGNATURE); doInitElectronicThrottle(PASS_ENGINE_PARAMETER_SIGNATURE);
} }
@ -123,14 +70,13 @@ TEST(etb, initializationDualThrottle) {
// The presence of a second TPS indicates dual throttle // The presence of a second TPS indicates dual throttle
Sensor::setMockValue(SensorType::Tps2, 25.0f); Sensor::setMockValue(SensorType::Tps2, 25.0f);
engineConfiguration->etbFunctions[0] = ETB_Throttle1;
engineConfiguration->etbFunctions[1] = ETB_Throttle2;
// Expect mock0 to be init as throttle 1, and PID params // Expect mock0 to be init as throttle 1, and PID params
EXPECT_CALL(mocks[0], init(ETB_Throttle1, _, &engineConfiguration->etb, Ne(nullptr))).WillOnce(Return(true)); EXPECT_CALL(mocks[0], init(ETB_Throttle1, _, &engineConfiguration->etb, Ne(nullptr))).WillOnce(Return(true));
EXPECT_CALL(mocks[0], reset);
// Expect mock1 to be init as throttle 2, and PID params // Expect mock1 to be init as throttle 2, and PID params
EXPECT_CALL(mocks[1], init(ETB_Throttle2, _, &engineConfiguration->etb, Ne(nullptr))).WillOnce(Return(true)); EXPECT_CALL(mocks[1], init(ETB_Throttle2, _, &engineConfiguration->etb, Ne(nullptr))).WillOnce(Return(true));
EXPECT_CALL(mocks[1], reset);
doInitElectronicThrottle(PASS_ENGINE_PARAMETER_SIGNATURE); doInitElectronicThrottle(PASS_ENGINE_PARAMETER_SIGNATURE);
} }

View File

@ -32,5 +32,3 @@ void assertEqualsM(const char *msg, float expected, float actual);
void assertEqualsLM(const char *msg, long expected, long actual); void assertEqualsLM(const char *msg, long expected, long actual);
void assertEqualsM4(const char *prefix, const char *msg, float expected, float actual); void assertEqualsM4(const char *prefix, const char *msg, float expected, float actual);
#define EXPECT_NO_FATAL_ERROR EXPECT_NO_THROW
#define EXPECT_FATAL_ERROR(expr) EXPECT_THROW((expr), std::logic_error)