mirror of https://github.com/rusefi/rusefi-1.git
More readme.txt and STMFlashLoader_all_screenshots.png
This commit is contained in:
parent
87f0890ae0
commit
3db7ac986a
Binary file not shown.
After Width: | Height: | Size: 33 KiB |
|
@ -8,15 +8,17 @@ To start the bootloader updater:
|
|||
- Turn on the ECU board.
|
||||
- If the connection is successful, the next page of STMFlashLoader appears immediately. Press "Next" button again and follow the instructions.
|
||||
- You can use:
|
||||
- Flash Read command;
|
||||
- Flash Write command;
|
||||
- Sector Erase command (not Full Erase!).
|
||||
- Upload from device (Flash Read) command;
|
||||
- Download to device (Flash Write) command;
|
||||
- Erase->Selection command (only Sector erase is currently supported, not Full Erase!).
|
||||
|
||||
To update the firmware:
|
||||
- choose "Flash Write" mode;
|
||||
- choose "Download to device" mode;
|
||||
- select the firmware file (rusefi.hex). Note! ***Use only recent firmware builds with bootloader support!***
|
||||
- you may select "verify" option to check
|
||||
- you may select "Start application" to automatically run the main firmware after the update.
|
||||
- you may select "Jump to the user program" to automatically run the main firmware after the update.
|
||||
|
||||
See STMFlashLoader_all_screenshots.png for more info.
|
||||
|
||||
!!! Note that the bootloader can update only the main firmware, but not itself !!!
|
||||
|
||||
|
|
Loading…
Reference in New Issue