rusefi
/
rusefi-1
mirror of https://github.com/rusefi/rusefi-1.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

fix sequential mode cranking (#2919) 

* fix

* use the right enum

* do it for fuel too

* earlier

* s
This commit is contained in:
Matthew Kennedy 2022-02-01 16:04:20 -08:00 committed by GitHub
parent 6455870ba8
commit 41ab294281
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
2 changed files with 15 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

11
firmware/controllers/engine_cycle/fuel_schedule.cpp
View File

@ -60,11 +60,17 @@ bool FuelSchedule::addFuelEventsForCylinder(int i ) {
injection_mode_e mode = engine->getCurrentInjectionMode();
// We need two outputs if:
// - we are running batch fuel, and have "use two wire batch" enabled
// - running mode is sequential, but cranking mode is batch, so we should run two wire batch while cranking
// (if we didn't, only half of injectors would fire while cranking)
bool isTwoWireBatch = engineConfiguration->twoWireBatchInjection || (engineConfiguration->injectionMode == IM_SEQUENTIAL);
int injectorIndex;
if (mode == IM_SIMULTANEOUS || mode == IM_SINGLE_POINT) {
// These modes only have one injector
injectorIndex = 0;
} else if (mode == IM_SEQUENTIAL || (mode == IM_BATCH && engineConfiguration->twoWireBatchInjection)) {
} else if (mode == IM_SEQUENTIAL || (mode == IM_BATCH && isTwoWireBatch)) {
// Map order index -> cylinder index (firing order)
injectorIndex = getCylinderId(i) - 1;
} else if (mode == IM_BATCH) {
@ -76,7 +82,8 @@ bool FuelSchedule::addFuelEventsForCylinder(int i ) {
}
InjectorOutputPin *secondOutput;
if (mode == IM_BATCH && engineConfiguration->twoWireBatchInjection) {
if (mode == IM_BATCH && isTwoWireBatch) {
/**
* also fire the 2nd half of the injectors so that we can implement a batch mode on individual wires
*/

7
firmware/controllers/engine_cycle/spark_logic.cpp
View File

@ -89,7 +89,12 @@ static void prepareCylinderIgnitionSchedule(angle_t dwellAngleDuration, floatms_
IgnitionOutputPin *output = &enginePins.coils[coilIndex];
IgnitionOutputPin *secondOutput;
if (getCurrentIgnitionMode() == IM_WASTED_SPARK && engineConfiguration->twoWireBatchIgnition) {
// We need two outputs if:
// - we are running wasted spark, and have "two wire" mode enabled
// - We are running sequential mode, but we're cranking, so we should run in two wire wasted mode (not one wire wasted)
bool isTwoWireWasted = engineConfiguration->twoWireBatchIgnition || (engineConfiguration->ignitionMode == IM_INDIVIDUAL_COILS);
if (getCurrentIgnitionMode() == IM_WASTED_SPARK && isTwoWireWasted) {
int secondIndex = index + engineConfiguration->specs.cylindersCount / 2;
int secondCoilIndex = ID2INDEX(getCylinderId(secondIndex));
secondOutput = &enginePins.coils[secondCoilIndex];