diff --git a/hardware/CJ125_board/CJ125_Schematic_0_3.pdf b/hardware/CJ125_board/CJ125_Schematic_0_3.pdf
new file mode 100644
index 0000000000..dbfb5b3eb2
Binary files /dev/null and b/hardware/CJ125_board/CJ125_Schematic_0_3.pdf differ
diff --git a/hardware/CJ125_board/CJ125_Schematic_0_4_2.pdf b/hardware/CJ125_board/CJ125_Schematic_0_4_2.pdf
new file mode 100644
index 0000000000..1fbb96e2a8
Binary files /dev/null and b/hardware/CJ125_board/CJ125_Schematic_0_4_2.pdf differ
diff --git a/hardware/CJ125_board/known_issues.txt b/hardware/CJ125_board/known_issues.txt
index d235e7accf..76ba054721 100644
--- a/hardware/CJ125_board/known_issues.txt
+++ b/hardware/CJ125_board/known_issues.txt
@@ -11,8 +11,8 @@
 11) RESOLVED IN R0.3 provide 4 extra holes in corners just for flat mounting
 12) RESOLVED IN R0.3 power ON status LED, heater intensity LED
 13) RESOLVED IN R0.4 Change solder mask, from 0.007874015748 to 0.003. 
-14) RESOLVED IN R0.4.1 Change LSU4.9 to 301 ohms, as noted here https://rusefi.com/forum/viewtopic.php?f=4&t=1052&start=143
-15) RESOLVED IN R0.4.1 Change Rfb1 and Rfb2 should be increased to 5.11k and 511k as noted here https://rusefi.com/forum/viewtopic.php?f=4&t=1052&start=143
+14) RESOLVED IN R0.4.1 Change LSU4.9 to 301 ohms (R10 changed from 117.5R to 220R), as noted here https://rusefi.com/forum/viewtopic.php?f=4&t=1052&start=143
+15) RESOLVED IN R0.4.1 Change R11 Rfb1 and R14 Rfb2 should be increased R11 from 4.7K to 5.11k, R14 from 470K 511k as noted here https://rusefi.com/forum/viewtopic.php?f=4&t=1052&start=143
 16)                  Sepeate the signald GND and the power GND for a better design
 17)                  and the GND ring around pin 22 CF for better RF rejection. 
 18) RESOLVED IN R0.4.1 change label from sf.net/projects/rusefi/ to rusefi.com