rusefi
/
rusefi-1
mirror of https://github.com/rusefi/rusefi-1.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Multispark configuration (#1190) 

* multispark

* scaling, units

* hide in "broken stuff" menu for now

Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
This commit is contained in:
Matthew Kennedy 2020-03-14 06:13:38 -07:00 committed by GitHub
parent a617cb30a5
commit 43f3ab7624
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
2 changed files with 26 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
firmware/integration/rusefi_config.txt
View File

@ -750,11 +750,13 @@ custom maf_sensor_type_e 4 bits, S32, @OFFSET@, [0:7], @@maf_sensor_type_e_enum@
switch_input_pin_e clutchUpPin;Some vehicles have a switch to indicate that clutch pedal is all the way up
brain_input_pin_e frequencyReportingMapInputPin;
pin_input_mode_e clutchUpPinMode;
float unused
uint16_t multisparkMaxRpm;;"rpm", 1, 0, 0, 3000, 0
uint8_t multisparkMaxSparkingAngle;;"deg", 1, 0, 0, 60, 0
uint8_t multisparkMaxExtraSparkCount;;"count", 1, 0, 0, 5, 0
bit todoClutchUpPinInverted
bit todoClutchDownPinInverted
bit useHbridges
bit unusedBit_251_3
bit multisparkEnable
bit unusedBit_251_4
bit unusedBit_251_5
bit unusedBit_251_6
@ -947,7 +949,8 @@ int16_t tps2Max;Full throttle#2. tpsMax value as 10 bit ADC value. Not Voltage!\
! todo: mapErrorDetectionIdleTooLow? 30kPa is usually lowest on idle
float mapErrorDetectionTooLow;kPa value which is too low to be true;"kPa", 1, 0, -100.0, 100.0, 2
float mapErrorDetectionTooHigh;kPa value which is too high to be true;"kPa", 1, 0, -100.0, 800.0, 2
uint8_t[4] unusedSomething;
uint16_t multisparkSparkDuration;; "ms", 0.001, 0, 0, 3, 2
uint16_t multisparkDwell;; "ms", 0.001, 0, 0, 3, 2
pid_s idleRpmPid;See cltIdleRpmBins
float wwaeBeta;+0 = No fuel settling on port walls 1 = All the fuel settling on port walls setting this to 0 disables the wall wetting enrichment. ;"Fraction", 1, 0, 0.0, 1.0, 2

21
firmware/tunerstudio/rusefi.input
View File

@ -1206,6 +1206,8 @@ menuDialog = main
subMenu = dwellSettings, "Dwell", 0, {isIgnitionEnabled == 1}
subMenu = ignitionCylExtra, "Ignition cylinder trim", 0, {isIgnitionEnabled == 1}
; todo: once proven, uncomment and remove from the "broken" menu
; subMenu = multisparkSettings, "Multispark", 0, {isIgnitionEnabled == 1}
subMenu = std_separator
subMenu = ignitionTableTbl, "Ignition advance", 0, {isIgnitionEnabled == 1 && useTPSAdvanceTable == 0}
@ -1323,6 +1325,7 @@ menuDialog = main
# EXPERIMENTAL FEATURES
subMenu = parkingLot, "Experimental/Broken"
subMenu = multisparkSettings, "Multispark", 0, {isIgnitionEnabled == 1}
subMenu = std_separator
subMenu = hipFunction, "HIP9011 settings (knock sensor) (alpha version)" @@if_ts_show_hip9011
@ -1602,7 +1605,23 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
field = "Extra cyl #10", timing_offset_cylinder10, {cylindersCount > 9}
field = "Extra cyl #11", timing_offset_cylinder11, {cylindersCount > 10}
field = "Extra cyl #12", timing_offset_cylinder12, {cylindersCount > 11}
dialog = multisparkDwellParams, "Delay & Dwell"
field = "Spark Duration", multisparkSparkDuration, {multisparkEnable}
field = "Dwell", multisparkDwell, {multisparkEnable}
dialog = multisparkMain, "Configuration"
field = "Maximum engine speed", multisparkMaxRpm, {multisparkEnable}
field = "Fire sparks for this angle duration" multisparkMaxSparkingAngle, {multisparkEnable}
field = "Maximum extra spark count" multisparkMaxExtraSparkCount, {multisparkEnable}
dialog = multisparkSettings, "Multispark"
field = "#WARNING! These settings have the potential to overheat ignition components"
field = "#and cause other nasty misbehavior. Use with care, at your own risk!"
field = "Enable Multiple Sparks", multisparkEnable
panel = multisparkMain
panel = multisparkDwellParams
dialog = dwellSettings, "", yAxis
panel = dwellCorrection, Center