mirror of https://github.com/rusefi/rusefi-1.git
hellen154hyundai
This commit is contained in:
Andrey
parent
f3dcb1a76f
commit
450b6694da
|
|
@ -0,0 +1,38 @@
|
|||
# Combine the related files for a specific platform and MCU.
|
||||
|
||||
# Target ECU board design
|
||||
BOARDCPPSRC = $(BOARDS_DIR)/hellen/hellen154hyundai/board_configuration.cpp
|
||||
BOARDINC = $(BOARDS_DIR)/hellen/hellen154hyundai
|
||||
|
||||
# Set this if you want a default engine type other than normal hellen121nissan
|
||||
ifeq ($(DEFAULT_ENGINE_TYPE),)
|
||||
DEFAULT_ENGINE_TYPE = -DDEFAULT_ENGINE_TYPE=HELLEN_154_HYUNDAI
|
||||
endif
|
||||
|
||||
ifeq ($(LED_CRITICAL_ERROR_BRAIN_PIN),)
|
||||
LED_CRITICAL_ERROR_BRAIN_PIN = -DLED_CRITICAL_ERROR_BRAIN_PIN=GPIOG_0
|
||||
endif
|
||||
|
||||
DDEFS += -DEFI_MAIN_RELAY_CONTROL=TRUE
|
||||
|
||||
DDEFS += -DLED_ERROR_BRAIN_PIN_MODE=INVERTED_OUTPUT
|
||||
DDEFS += -DLED_RUNING_BRAIN_PIN_MODE=INVERTED_OUTPUT
|
||||
DDEFS += -DLED_WARNING_BRAIN_PIN_MODE=INVERTED_OUTPUT
|
||||
DDEFS += -DLED_COMMUNICATION_BRAIN_PIN_MODE=INVERTED_OUTPUT
|
||||
|
||||
# Disable serial ports on this board as UART3 causes a DMA conflict with the SD card
|
||||
DDEFS += -DTS_NO_PRIMARY -DTS_NO_SECONDARY
|
||||
|
||||
# Add them all together
|
||||
DDEFS += -DEFI_USE_OSC=TRUE -DFIRMWARE_ID=\"hellen154hyundai\" $(DEFAULT_ENGINE_TYPE) $(LED_CRITICAL_ERROR_BRAIN_PIN) $(LED_COMMUNICATION_BRAIN_PIN)
|
||||
DDEFS += -DEFI_SOFTWARE_KNOCK=TRUE -DSTM32_ADC_USE_ADC3=TRUE
|
||||
DDEFS += -DEFI_ICU_INPUTS=FALSE -DHAL_TRIGGER_USE_PAL=TRUE -DHAL_VSS_USE_PAL=TRUE
|
||||
# todo: is it broken?
|
||||
DDEFS += -DEFI_LOGIC_ANALYZER=FALSE
|
||||
|
||||
# We are running on Hellen-One hardware!
|
||||
DDEFS += -DHW_HELLEN=1
|
||||
|
||||
# Shared variables
|
||||
ALLCPPSRC += $(BOARDCPPSRC)
|
||||
ALLINC += $(BOARDINC)
|
||||
|
|
@ -0,0 +1,203 @@
|
|||
/**
|
||||
* @file boards/hellen/hellen121nissan/board_configuration.cpp
|
||||
*
|
||||
*
|
||||
* @brief Configuration defaults for the hellen121nissan board
|
||||
*
|
||||
* See https://rusefi.com/s/hellen121nissan
|
||||
*
|
||||
* @author andreika <prometheus.pcb@gmail.com>
|
||||
* @author Andrey Belomutskiy, (c) 2012-2020
|
||||
*/
|
||||
|
||||
#include "global.h"
|
||||
#include "engine.h"
|
||||
#include "engine_math.h"
|
||||
#include "allsensors.h"
|
||||
#include "fsio_impl.h"
|
||||
#include "engine_configuration.h"
|
||||
|
||||
static void hellenWbo() {
|
||||
engineConfiguration->enableAemXSeries = true;
|
||||
}
|
||||
|
||||
static void setInjectorPins() {
|
||||
engineConfiguration->injectionPins[0] = GPIOG_7;
|
||||
engineConfiguration->injectionPins[1] = GPIOG_8;
|
||||
engineConfiguration->injectionPins[2] = GPIOD_11;
|
||||
engineConfiguration->injectionPins[3] = GPIOD_10;
|
||||
engineConfiguration->injectionPins[4] = GPIOD_9;
|
||||
engineConfiguration->injectionPins[5] = GPIOF_12;
|
||||
|
||||
|
||||
// Disable remainder
|
||||
for (int i = 6; i < MAX_CYLINDER_COUNT;i++) {
|
||||
engineConfiguration->injectionPins[i] = GPIO_UNASSIGNED;
|
||||
}
|
||||
|
||||
engineConfiguration->injectionPinMode = OM_DEFAULT;
|
||||
}
|
||||
|
||||
static void setIgnitionPins() {
|
||||
engineConfiguration->ignitionPins[0] = GPIOC_13;
|
||||
engineConfiguration->ignitionPins[1] = GPIOE_5;
|
||||
engineConfiguration->ignitionPins[2] = GPIOE_4;
|
||||
engineConfiguration->ignitionPins[3] = GPIOE_3;
|
||||
engineConfiguration->ignitionPins[4] = GPIOE_2;
|
||||
engineConfiguration->ignitionPins[5] = GPIOB_8;
|
||||
|
||||
// disable remainder
|
||||
for (int i = 6; i < MAX_CYLINDER_COUNT; i++) {
|
||||
engineConfiguration->ignitionPins[i] = GPIO_UNASSIGNED;
|
||||
}
|
||||
|
||||
engineConfiguration->ignitionPinMode = OM_DEFAULT;
|
||||
}
|
||||
|
||||
static void setLedPins() {
|
||||
#ifdef EFI_COMMUNICATION_PIN
|
||||
engineConfiguration->communicationLedPin = EFI_COMMUNICATION_PIN;
|
||||
#else
|
||||
engineConfiguration->communicationLedPin = GPIOE_7;
|
||||
#endif /* EFI_COMMUNICATION_PIN */
|
||||
engineConfiguration->runningLedPin = GPIOG_1; // green
|
||||
engineConfiguration->warningLedPin = GPIOE_8; // yellow
|
||||
}
|
||||
|
||||
static void setupVbatt() {
|
||||
// 4.7k high side/4.7k low side = 2.0 ratio divider
|
||||
engineConfiguration->analogInputDividerCoefficient = 2.0f;
|
||||
|
||||
// set vbatt_divider 5.835
|
||||
// 33k / 6.8k
|
||||
engineConfiguration->vbattDividerCoeff = (33 + 6.8) / 6.8; // 5.835
|
||||
|
||||
// pin input +12 from Main Relay
|
||||
engineConfiguration->vbattAdcChannel = EFI_ADC_5; // 4T
|
||||
|
||||
engineConfiguration->adcVcc = 3.29f;
|
||||
}
|
||||
|
||||
static void setupDefaultSensorInputs() {
|
||||
// trigger inputs
|
||||
engineConfiguration->triggerInputPins[0] = GPIOB_1;
|
||||
engineConfiguration->triggerInputPins[1] = GPIO_UNASSIGNED;
|
||||
engineConfiguration->triggerInputPins[2] = GPIO_UNASSIGNED;
|
||||
// Direct hall-only cam input
|
||||
engineConfiguration->camInputs[0] = GPIOA_6;
|
||||
engineConfiguration->camInputs[1 * CAMS_PER_BANK] = GPIOA_7;
|
||||
|
||||
engineConfiguration->tps1_1AdcChannel = EFI_ADC_4;
|
||||
engineConfiguration->tps1_2AdcChannel = EFI_ADC_8;
|
||||
|
||||
engineConfiguration->throttlePedalPositionAdcChannel = EFI_ADC_3;
|
||||
engineConfiguration->throttlePedalPositionSecondAdcChannel = EFI_ADC_14;
|
||||
engineConfiguration->mafAdcChannel = EFI_ADC_10;
|
||||
engineConfiguration->map.sensor.hwChannel = EFI_ADC_11;
|
||||
|
||||
engineConfiguration->afr.hwChannel = EFI_ADC_1;
|
||||
|
||||
engineConfiguration->clt.adcChannel = EFI_ADC_12;
|
||||
|
||||
engineConfiguration->iat.adcChannel = EFI_ADC_13;
|
||||
|
||||
engineConfiguration->auxTempSensor1.adcChannel = EFI_ADC_NONE;
|
||||
engineConfiguration->auxTempSensor2.adcChannel = EFI_ADC_NONE;
|
||||
}
|
||||
|
||||
void setBoardConfigOverrides(void) {
|
||||
setLedPins();
|
||||
setupVbatt();
|
||||
setSdCardConfigurationOverrides();
|
||||
|
||||
engineConfiguration->clt.config.bias_resistor = 4700;
|
||||
engineConfiguration->iat.config.bias_resistor = 4700;
|
||||
}
|
||||
|
||||
void setPinConfigurationOverrides(void) {
|
||||
}
|
||||
|
||||
void setSerialConfigurationOverrides(void) {
|
||||
engineConfiguration->useSerialPort = false;
|
||||
engineConfiguration->binarySerialTxPin = GPIO_UNASSIGNED;
|
||||
engineConfiguration->binarySerialRxPin = GPIO_UNASSIGNED;
|
||||
// engineConfiguration->consoleSerialTxPin = GPIO_UNASSIGNED;
|
||||
// engineConfiguration->consoleSerialRxPin = GPIO_UNASSIGNED;
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @brief Board-specific configuration defaults.
|
||||
*
|
||||
* See also setDefaultEngineConfiguration
|
||||
*
|
||||
* @todo Add your board-specific code, if any.
|
||||
*/
|
||||
void setBoardDefaultConfiguration(void) {
|
||||
setInjectorPins();
|
||||
setIgnitionPins();
|
||||
|
||||
engineConfiguration->displayLogicLevelsInEngineSniffer = true;
|
||||
engineConfiguration->isSdCardEnabled = true;
|
||||
|
||||
CONFIG(enableSoftwareKnock) = true;
|
||||
CONFIG(canNbcType) = CAN_BUS_NISSAN_VQ;
|
||||
|
||||
engineConfiguration->canTxPin = GPIOD_1;
|
||||
engineConfiguration->canRxPin = GPIOD_0;
|
||||
|
||||
// engineConfiguration->fuelPumpPin = GPIOG_2; // OUT_IO9
|
||||
// engineConfiguration->idle.solenoidPin = GPIOD_14; // OUT_PWM5
|
||||
// engineConfiguration->fanPin = GPIOD_12; // OUT_PWM8
|
||||
engineConfiguration->mainRelayPin = GPIOG_14; // pin: 111a, OUT_IO3
|
||||
|
||||
// "required" hardware is done - set some reasonable defaults
|
||||
setupDefaultSensorInputs();
|
||||
|
||||
engineConfiguration->etbIo[0].directionPin1 = GPIOD_15; // out_pwm7
|
||||
engineConfiguration->etbIo[0].directionPin2 = GPIOD_14; // out_pwm6
|
||||
engineConfiguration->etbIo[0].controlPin = GPIOD_13; // ETB_EN out_pwm1
|
||||
CONFIG(etb_use_two_wires) = true;
|
||||
|
||||
// Some sensible defaults for other options
|
||||
setOperationMode(engineConfiguration, FOUR_STROKE_CRANK_SENSOR);
|
||||
|
||||
engineConfiguration->vvtCamSensorUseRise = true;
|
||||
engineConfiguration->useOnlyRisingEdgeForTrigger = true;
|
||||
setAlgorithm(LM_SPEED_DENSITY PASS_CONFIG_PARAMETER_SUFFIX);
|
||||
|
||||
|
||||
// Bosch VQ40 VR56 VK56 0280158007
|
||||
engineConfiguration->injector.flow = 296.2;
|
||||
|
||||
engineConfiguration->specs.cylindersCount = 6;
|
||||
engineConfiguration->specs.firingOrder = FO_1_2_3_4_5_6;
|
||||
engineConfiguration->specs.displacement = 4;
|
||||
strcpy(CONFIG(engineMake), ENGINE_MAKE_NISSAN);
|
||||
strcpy(CONFIG(engineCode), "VQ");
|
||||
|
||||
engineConfiguration->ignitionMode = IM_INDIVIDUAL_COILS; // IM_WASTED_SPARK
|
||||
engineConfiguration->crankingInjectionMode = IM_SIMULTANEOUS;
|
||||
engineConfiguration->injectionMode = IM_SIMULTANEOUS;//IM_BATCH;// IM_SEQUENTIAL;
|
||||
|
||||
hellenWbo();
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Board-specific SD card configuration code overrides. Needed by bootloader code.
|
||||
* @todo Add your board-specific code, if any.
|
||||
*/
|
||||
void setSdCardConfigurationOverrides(void) {
|
||||
engineConfiguration->sdCardSpiDevice = SPI_DEVICE_3;
|
||||
|
||||
engineConfiguration->spi3mosiPin = GPIOC_12;
|
||||
engineConfiguration->spi3misoPin = GPIOC_11;
|
||||
engineConfiguration->spi3sckPin = GPIOC_10;
|
||||
engineConfiguration->sdCardCsPin = GPIOA_15;
|
||||
|
||||
// engineConfiguration->spi2mosiPin = GPIOB_15;
|
||||
// engineConfiguration->spi2misoPin = GPIOB_14;
|
||||
// engineConfiguration->spi2sckPin = GPIOB_13;
|
||||
// engineConfiguration->sdCardCsPin = GPIOB_12;
|
||||
CONFIG(is_enabled_spi_3) = true;
|
||||
}
|
||||
|
|
@ -0,0 +1,8 @@
|
|||
#!/bin/bash
|
||||
|
||||
export PROJECT_BOARD=hellen/hellen121nissan
|
||||
export PROJECT_CPU=ARCH_STM32F4
|
||||
export EXTRA_PARAMS="-DSHORT_BOARD_NAME=hellen121nissan"
|
||||
|
||||
cd ..
|
||||
bash ../common_make.sh
|
||||
|
|
@ -0,0 +1,16 @@
|
|||
/**
|
||||
* @file knock_config.h
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
// Knock is on ADC3
|
||||
#define KNOCK_ADC ADCD3
|
||||
|
||||
// knock 1 - pin PF7
|
||||
#define KNOCK_ADC_CH1 ADC_CHANNEL_IN5
|
||||
#define KNOCK_PIN_CH1 GPIOF_7
|
||||
|
||||
// Sample rate & time - depends on the exact MCU
|
||||
#define KNOCK_SAMPLE_TIME ADC_SAMPLE_84
|
||||
#define KNOCK_SAMPLE_RATE (STM32_PCLK2 / (4 * (84 + 12)))
|
||||
|
|
@ -0,0 +1,26 @@
|
|||
#define MAIN_HELP_URL "https://rusefi.com/s/hellen121nissan"
|
||||
|
||||
#define ts_show_hip9011 false
|
||||
#define ts_show_cj125 false
|
||||
|
||||
//Jokeri says it's better with full pinout just in case
|
||||
//#define ts_show_full_pinout false
|
||||
|
||||
#define ts_show_lcd false
|
||||
#define ts_show_joystick false
|
||||
#define ts_show_egt false
|
||||
#define ts_show_gps false
|
||||
#define ts_show_etb_pins false
|
||||
#define ts_show_analog_divider false
|
||||
#define ts_show_spi true
|
||||
#define ts_show_sd_card true
|
||||
#define ts_show_can_pins false
|
||||
#define ts_show_tunerstudio_port false
|
||||
#define ts_show_can2 false
|
||||
#define ts_show_software_knock true
|
||||
#define ts_show_hardware_simulator false
|
||||
|
||||
#define show_test_presets false
|
||||
#define show_Frankenso_presets false
|
||||
#define show_microRusEFI_presets false
|
||||
#define show_Proteus_presets false
|
||||
|
|
@ -0,0 +1 @@
|
|||
https://rusefi.com/s/hellen121nissan
|
||||
Loading…
Reference in New Issue