rusefi
/
rusefi-1
mirror of https://github.com/rusefi/rusefi-1.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

unified padding naming

This commit is contained in:
rusefi 2020-06-29 21:43:59 -04:00
parent d435466b66
commit 4d25ce8568
1 changed files with 14 additions and 14 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

28
firmware/integration/rusefi_config.txt
View File

@ -304,7 +304,7 @@ struct gppwm_channel
uint8_t offBelowDuty;+In on-off mode, turn the output off when the table value is below this duty.;"%", 1, 0, 0, 100, 0
gppwm_channel_e loadAxis;+Selects the load axis to use for the table.;
uint8_t[1] pad;
uint8_t[1] alignmentFill;
uint8_t[GPPWM_LOAD_COUNT] loadBins;;"load", 1, 0, 0.0, 250, 0
uint8_t[GPPWM_RPM_COUNT] rpmBins;;"RPM", @@RPM_1_BYTE_PACKING_MULT@@, 0, 0.0, 12000.0, 0
@ -324,7 +324,7 @@ float lowValue;kPa value at low volts;"kpa", 1, 0, -400, 800, 2
float highValue;kPa value at high volts;"kpa", 1, 0, -400, 800, 2
air_pressure_sensor_type_e type;
adc_channel_e hwChannel;
uint8_t[3] align;
uint8_t[3] alignmentFill;
end_struct
@ -349,7 +349,7 @@ end_struct
struct oil_pressure_config_s @brief Oil pressure sensor interpolation
adc_channel_e hwChannel;
uint8_t[3] align;
uint8_t[3] alignmentFill;
float v1;; "volts", 1, 0.0, 0, 10.0, 2
float value1;; "kPa", 1, 0.0, 0, 1000.0, 2
float v2;; "volts", 1, 0.0, 0, 10.0, 2
@ -557,7 +557,7 @@ float globalFuelCorrection;set global_fuel_correction X;"coef", 1, 0.0,
struct afr_sensor_s
adc_channel_e hwChannel;
uint8_t[3] alignAf;
uint8_t[3] alignmentFill_afr;
float v1;; "volts", 1, 0.0, 0, 10.0, 2
float value1;; "AFR", 1, 0.0, 0, 1000.0, 2
float v2;; "volts", 1, 0.0, 0, 10.0, 2
@ -749,7 +749,7 @@ custom uart_device_e 1 bits,U32, @OFFSET@, [0:1], "Off", "UART1", "UART2", "UA
int16_t stepperParkingExtraSteps;;"%", 1, 0, 0, 3000.0, 0
uint16_t tps1SecondaryMin;;"ADC", 1, 0, 0, 1000, 0
uint16_t tps1SecondaryMax;;"ADC", 1, 0, 0, 1000, 0
int16_t antiLagRpmTreshold;
int16_t antiLagRpmTreshold;;"rpm", 1, 0, 0, 20000, 0
int16_t startCrankingDuration;Maximum time to crank starter;"Seconds", 1, 0, 0, 30, 0
brain_pin_e triggerErrorPin;+This pin is used for debugging - snap a logic analyzer on it and see if it's ever high
@ -873,9 +873,9 @@ custom maf_sensor_type_e 4 bits, S32, @OFFSET@, [0:1], @@maf_sensor_type_e_enum@
int launchFuelAdded;+Extra Fuel Added;"%", 1, 0, 0, 100.0, 0
int launchBoostDuty;+Duty Cycle for the Boost Solenoid;"%", 1, 0, 0, 100.0, 0
int hardCutRpmRange;+RPM Range for Hard Cut;"rpm", 1, 0, 0, 3000.0, 2
int launchAdvanceRpmRange;
int launchTpsTreshold;
float launchActivateDelay;
int launchAdvanceRpmRange;;"rpm", 1, 0, 0, 20000, 0
int launchTpsTreshold;;"rpm", 1, 0, 0, 20000, 0
float launchActivateDelay;;"rpm", 1, 0, 0, 20000, 0
stft_s stft
@ -1140,9 +1140,9 @@ custom tle8888_mode_e 1 bits, U08, @OFFSET@, [0:1], "Auto", "SemiAuto", "Manual"
tle8888_mode_e tle8888mode;
uint8_t[3] unusedSomethingWasHere;
float autoTuneCltThreshold;
float autoTuneTpsRocThreshold;
float autoTuneTpsQuietPeriod;
float unused244_1;
float unused244_2;
float unused244_3;
float unused2432;
float postCrankingFactor;+Fuel multiplier (enrichment) immediately after engine start;"mult", 1, 0, 0, 100, 4
float postCrankingDurationSec;+Time over which to taper out after start enrichment;"seconds", 1, 0, 0, 100, 2
@ -1270,9 +1270,9 @@ tChargeMode_e tChargeMode;
float etbIdleThrottleRange; ETB idle authority; "%", 1, 0, 0, 15, 0
uint8_t[4] unusuedvref;
uint8_t[4] unusuedsw;
int[3] alFIn;
uint8_t[4] unusedvref;
uint8_t[4] unusedsw;
int[3] unused_alFIn;
uint8_t triggerCompCenterVolt;+Trigger comparator center point voltage;"V", @@VOLTAGE_1_BYTE_PACKING_DIV@@, 0, 0.0, 5.1, 2
uint8_t triggerCompHystMin;+Trigger comparator hysteresis voltage (Min);"V", @@VOLTAGE_1_BYTE_PACKING_DIV@@, 0, 0.0, 5.1, 2