mirror of https://github.com/rusefi/rusefi-1.git
Auto-generated configs and docs
This commit is contained in:
GitHub build-firmware Action
parent
890d014679
commit
5b638d3a87
|
|
@ -1,4 +1,4 @@
|
|||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Thu Dec 24 12:33:03 UTC 2020
|
||||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Wed Dec 30 13:37:33 UTC 2020
|
||||
// by class com.rusefi.output.CHeaderConsumer
|
||||
// begin
|
||||
#pragma once
|
||||
|
|
@ -1596,6 +1596,7 @@ struct engine_configuration_s {
|
|||
*/
|
||||
int mapMinBufferLength;
|
||||
/**
|
||||
* Below this throttle position, the engine is considered idling.
|
||||
* offset 816
|
||||
*/
|
||||
int16_t idlePidDeactivationTpsThreshold;
|
||||
|
|
@ -3782,4 +3783,4 @@ struct persistent_config_s {
|
|||
typedef struct persistent_config_s persistent_config_s;
|
||||
|
||||
// end
|
||||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Thu Dec 24 12:33:03 UTC 2020
|
||||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Wed Dec 30 13:37:33 UTC 2020
|
||||
|
|
|
|||
|
|
@ -1226,8 +1226,8 @@
|
|||
#define showHumanReadableWarning_offset 976
|
||||
#define showSdCardWarning_offset 76
|
||||
#define SIGNATURE_BOARD hellen_cypress
|
||||
#define SIGNATURE_DATE 2020.12.24
|
||||
#define SIGNATURE_HASH 140549664
|
||||
#define SIGNATURE_DATE 2020.12.30
|
||||
#define SIGNATURE_HASH 1738189114
|
||||
#define silentTriggerError_offset 1464
|
||||
#define slowAdcAlpha_offset 2088
|
||||
#define sparkDwellRpmBins_offset 332
|
||||
|
|
@ -1558,7 +1558,7 @@
|
|||
#define ts_show_spi true
|
||||
#define ts_show_trigger_comparator false
|
||||
#define ts_show_tunerstudio_port true
|
||||
#define TS_SIGNATURE "rusEFI 2020.12.24.hellen_cypress.140549664"
|
||||
#define TS_SIGNATURE "rusEFI 2020.12.30.hellen_cypress.1738189114"
|
||||
#define TS_SINGLE_WRITE_COMMAND 'W'
|
||||
#define TS_SINGLE_WRITE_COMMAND_char W
|
||||
#define TS_TEST_COMMAND 't' // 0x74
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Thu Dec 24 12:33:01 UTC 2020
|
||||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Wed Dec 30 13:37:29 UTC 2020
|
||||
// by class com.rusefi.output.CHeaderConsumer
|
||||
// begin
|
||||
#pragma once
|
||||
|
|
@ -1596,6 +1596,7 @@ struct engine_configuration_s {
|
|||
*/
|
||||
int mapMinBufferLength;
|
||||
/**
|
||||
* Below this throttle position, the engine is considered idling.
|
||||
* offset 816
|
||||
*/
|
||||
int16_t idlePidDeactivationTpsThreshold;
|
||||
|
|
@ -3782,4 +3783,4 @@ struct persistent_config_s {
|
|||
typedef struct persistent_config_s persistent_config_s;
|
||||
|
||||
// end
|
||||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Thu Dec 24 12:33:01 UTC 2020
|
||||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Wed Dec 30 13:37:29 UTC 2020
|
||||
|
|
|
|||
|
|
@ -1226,8 +1226,8 @@
|
|||
#define showHumanReadableWarning_offset 976
|
||||
#define showSdCardWarning_offset 76
|
||||
#define SIGNATURE_BOARD kin
|
||||
#define SIGNATURE_DATE 2020.12.24
|
||||
#define SIGNATURE_HASH 1501340890
|
||||
#define SIGNATURE_DATE 2020.12.30
|
||||
#define SIGNATURE_HASH 914789312
|
||||
#define silentTriggerError_offset 1464
|
||||
#define slowAdcAlpha_offset 2088
|
||||
#define sparkDwellRpmBins_offset 332
|
||||
|
|
@ -1558,7 +1558,7 @@
|
|||
#define ts_show_spi true
|
||||
#define ts_show_trigger_comparator true
|
||||
#define ts_show_tunerstudio_port true
|
||||
#define TS_SIGNATURE "rusEFI 2020.12.24.kin.1501340890"
|
||||
#define TS_SIGNATURE "rusEFI 2020.12.30.kin.914789312"
|
||||
#define TS_SINGLE_WRITE_COMMAND 'W'
|
||||
#define TS_SINGLE_WRITE_COMMAND_char W
|
||||
#define TS_TEST_COMMAND 't' // 0x74
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Dec 24 12:32:41 UTC 2020
|
||||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Dec 30 13:37:13 UTC 2020
|
||||
// by class com.rusefi.output.CHeaderConsumer
|
||||
// begin
|
||||
#pragma once
|
||||
|
|
@ -1596,6 +1596,7 @@ struct engine_configuration_s {
|
|||
*/
|
||||
int mapMinBufferLength;
|
||||
/**
|
||||
* Below this throttle position, the engine is considered idling.
|
||||
* offset 816
|
||||
*/
|
||||
int16_t idlePidDeactivationTpsThreshold;
|
||||
|
|
@ -3782,4 +3783,4 @@ struct persistent_config_s {
|
|||
typedef struct persistent_config_s persistent_config_s;
|
||||
|
||||
// end
|
||||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Dec 24 12:32:41 UTC 2020
|
||||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Dec 30 13:37:13 UTC 2020
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
// this file was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Dec 24 12:32:41 UTC 2020
|
||||
// this file was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Dec 30 13:37:13 UTC 2020
|
||||
|
||||
// by class com.rusefi.output.FileFsioSettingsConsumer
|
||||
FSIO_SETTING_FANONTEMPERATURE = 1000,
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
// this file was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Dec 24 12:32:41 UTC 2020
|
||||
// this file was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Dec 30 13:37:13 UTC 2020
|
||||
|
||||
// by class com.rusefi.output.FileFsioSettingsConsumer
|
||||
case FSIO_SETTING_FANONTEMPERATURE:
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
// this file was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Dec 24 12:32:41 UTC 2020
|
||||
// this file was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Dec 30 13:37:13 UTC 2020
|
||||
|
||||
// by class com.rusefi.output.FileFsioSettingsConsumer
|
||||
static LENameOrdinalPair lefanOnTemperature(FSIO_SETTING_FANONTEMPERATURE, "cfg_fanOnTemperature");
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
// this file was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Dec 24 12:32:41 UTC 2020
|
||||
// this file was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Dec 30 13:37:13 UTC 2020
|
||||
|
||||
// by class com.rusefi.output.FileFsioSettingsConsumer
|
||||
case FSIO_SETTING_FANONTEMPERATURE:
|
||||
|
|
|
|||
|
|
@ -1226,8 +1226,8 @@
|
|||
#define showHumanReadableWarning_offset 976
|
||||
#define showSdCardWarning_offset 76
|
||||
#define SIGNATURE_BOARD all
|
||||
#define SIGNATURE_DATE 2020.12.24
|
||||
#define SIGNATURE_HASH 3247519971
|
||||
#define SIGNATURE_DATE 2020.12.30
|
||||
#define SIGNATURE_HASH 2926252025
|
||||
#define silentTriggerError_offset 1464
|
||||
#define slowAdcAlpha_offset 2088
|
||||
#define sparkDwellRpmBins_offset 332
|
||||
|
|
@ -1558,7 +1558,7 @@
|
|||
#define ts_show_spi true
|
||||
#define ts_show_trigger_comparator false
|
||||
#define ts_show_tunerstudio_port true
|
||||
#define TS_SIGNATURE "rusEFI 2020.12.24.all.3247519971"
|
||||
#define TS_SIGNATURE "rusEFI 2020.12.30.all.2926252025"
|
||||
#define TS_SINGLE_WRITE_COMMAND 'W'
|
||||
#define TS_SINGLE_WRITE_COMMAND_char W
|
||||
#define TS_TEST_COMMAND 't' // 0x74
|
||||
|
|
|
|||
|
|
@ -3,6 +3,6 @@
|
|||
//
|
||||
|
||||
#define SIGNATURE_BOARD all
|
||||
#define SIGNATURE_DATE 2020.12.26
|
||||
#define SIGNATURE_HASH 267210507
|
||||
#define TS_SIGNATURE "rusEFI 2020.12.26.all.267210507"
|
||||
#define SIGNATURE_DATE 2020.12.30
|
||||
#define SIGNATURE_HASH 2926252025
|
||||
#define TS_SIGNATURE "rusEFI 2020.12.30.all.2926252025"
|
||||
|
|
|
|||
|
|
@ -3,6 +3,6 @@
|
|||
//
|
||||
|
||||
#define SIGNATURE_BOARD frankenso_na6
|
||||
#define SIGNATURE_DATE 2020.12.26
|
||||
#define SIGNATURE_HASH 2577268464
|
||||
#define TS_SIGNATURE "rusEFI 2020.12.26.frankenso_na6.2577268464"
|
||||
#define SIGNATURE_DATE 2020.12.30
|
||||
#define SIGNATURE_HASH 941342210
|
||||
#define TS_SIGNATURE "rusEFI 2020.12.30.frankenso_na6.941342210"
|
||||
|
|
|
|||
|
|
@ -3,6 +3,6 @@
|
|||
//
|
||||
|
||||
#define SIGNATURE_BOARD hellen_cypress
|
||||
#define SIGNATURE_DATE 2020.12.26
|
||||
#define SIGNATURE_HASH 3323783624
|
||||
#define TS_SIGNATURE "rusEFI 2020.12.26.hellen_cypress.3323783624"
|
||||
#define SIGNATURE_DATE 2020.12.30
|
||||
#define SIGNATURE_HASH 1738189114
|
||||
#define TS_SIGNATURE "rusEFI 2020.12.30.hellen_cypress.1738189114"
|
||||
|
|
|
|||
|
|
@ -3,6 +3,6 @@
|
|||
//
|
||||
|
||||
#define SIGNATURE_BOARD kin
|
||||
#define SIGNATURE_DATE 2020.12.26
|
||||
#define SIGNATURE_HASH 2533413682
|
||||
#define TS_SIGNATURE "rusEFI 2020.12.26.kin.2533413682"
|
||||
#define SIGNATURE_DATE 2020.12.30
|
||||
#define SIGNATURE_HASH 914789312
|
||||
#define TS_SIGNATURE "rusEFI 2020.12.30.kin.914789312"
|
||||
|
|
|
|||
|
|
@ -3,6 +3,6 @@
|
|||
//
|
||||
|
||||
#define SIGNATURE_BOARD mre_f4
|
||||
#define SIGNATURE_DATE 2020.12.26
|
||||
#define SIGNATURE_HASH 406688114
|
||||
#define TS_SIGNATURE "rusEFI 2020.12.26.mre_f4.406688114"
|
||||
#define SIGNATURE_DATE 2020.12.30
|
||||
#define SIGNATURE_HASH 3116093824
|
||||
#define TS_SIGNATURE "rusEFI 2020.12.30.mre_f4.3116093824"
|
||||
|
|
|
|||
|
|
@ -3,6 +3,6 @@
|
|||
//
|
||||
|
||||
#define SIGNATURE_BOARD mre_f7
|
||||
#define SIGNATURE_DATE 2020.12.26
|
||||
#define SIGNATURE_HASH 406688114
|
||||
#define TS_SIGNATURE "rusEFI 2020.12.26.mre_f7.406688114"
|
||||
#define SIGNATURE_DATE 2020.12.30
|
||||
#define SIGNATURE_HASH 3116093824
|
||||
#define TS_SIGNATURE "rusEFI 2020.12.30.mre_f7.3116093824"
|
||||
|
|
|
|||
|
|
@ -3,6 +3,6 @@
|
|||
//
|
||||
|
||||
#define SIGNATURE_BOARD prometheus_405
|
||||
#define SIGNATURE_DATE 2020.12.26
|
||||
#define SIGNATURE_HASH 1295337818
|
||||
#define TS_SIGNATURE "rusEFI 2020.12.26.prometheus_405.1295337818"
|
||||
#define SIGNATURE_DATE 2020.12.30
|
||||
#define SIGNATURE_HASH 3971156392
|
||||
#define TS_SIGNATURE "rusEFI 2020.12.30.prometheus_405.3971156392"
|
||||
|
|
|
|||
|
|
@ -3,6 +3,6 @@
|
|||
//
|
||||
|
||||
#define SIGNATURE_BOARD prometheus_469
|
||||
#define SIGNATURE_DATE 2020.12.26
|
||||
#define SIGNATURE_HASH 1295337818
|
||||
#define TS_SIGNATURE "rusEFI 2020.12.26.prometheus_469.1295337818"
|
||||
#define SIGNATURE_DATE 2020.12.30
|
||||
#define SIGNATURE_HASH 3971156392
|
||||
#define TS_SIGNATURE "rusEFI 2020.12.30.prometheus_469.3971156392"
|
||||
|
|
|
|||
|
|
@ -3,6 +3,6 @@
|
|||
//
|
||||
|
||||
#define SIGNATURE_BOARD proteus_f4
|
||||
#define SIGNATURE_DATE 2020.12.26
|
||||
#define SIGNATURE_HASH 3326543317
|
||||
#define TS_SIGNATURE "rusEFI 2020.12.26.proteus_f4.3326543317"
|
||||
#define SIGNATURE_DATE 2020.12.30
|
||||
#define SIGNATURE_HASH 1740719399
|
||||
#define TS_SIGNATURE "rusEFI 2020.12.30.proteus_f4.1740719399"
|
||||
|
|
|
|||
|
|
@ -3,6 +3,6 @@
|
|||
//
|
||||
|
||||
#define SIGNATURE_BOARD proteus_f7
|
||||
#define SIGNATURE_DATE 2020.12.26
|
||||
#define SIGNATURE_HASH 3326543317
|
||||
#define TS_SIGNATURE "rusEFI 2020.12.26.proteus_f7.3326543317"
|
||||
#define SIGNATURE_DATE 2020.12.30
|
||||
#define SIGNATURE_HASH 1740719399
|
||||
#define TS_SIGNATURE "rusEFI 2020.12.30.proteus_f7.1740719399"
|
||||
|
|
|
|||
Binary file not shown.
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI 2020.12.26.all.267210507"
|
||||
signature = "rusEFI 2020.12.30.all.2926252025"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmwave version for title bar.
|
||||
signature = "rusEFI 2020.12.26.all.267210507" ; signature is expected to be 7 or more characters.
|
||||
signature = "rusEFI 2020.12.30.all.2926252025" ; signature is expected to be 7 or more characters.
|
||||
|
||||
[Constants]
|
||||
; new packet serial format with CRC
|
||||
|
|
@ -77,7 +77,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Dec 26 21:17:38 UTC 2020
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Dec 30 13:37:13 UTC 2020
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -1336,6 +1336,7 @@ page = 1
|
|||
acIdleExtraMin = "Additional idle PID minValue while A/C is active"
|
||||
acFanPin = "Optional Radiator Fan used with A/C"
|
||||
sdCardPeriodMs = "SD card logging period, in milliseconds"
|
||||
idlePidDeactivationTpsThreshold = "Below this throttle position, the engine is considered idling."
|
||||
triggerErrorPin = "This pin is used for debugging - snap a logic analyzer on it and see if it's ever high"
|
||||
cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module"
|
||||
sensorChartMode = "rusEfi console Sensor Sniffer mode"
|
||||
|
|
@ -2796,16 +2797,16 @@ menuDialog = main
|
|||
menu = "&Idle"
|
||||
subMenu = idleSettings, "Idle settings"
|
||||
subMenu = idlehw, "Idle hardware"
|
||||
subMenu = std_separator
|
||||
subMenu = cltIdleRPMCurve, "Target RPM", 0, {idleMode == 0}
|
||||
subMenu = std_separator
|
||||
subMenu = cltIdleRPMCurve, "Target RPM"
|
||||
subMenu = cltIdleCurve, "CLT multiplier"
|
||||
subMenu = std_separator
|
||||
subMenu = idleTimingPidCorrDialog, "Closed-loop idle timing"
|
||||
subMenu = iacPidMultTbl, "IAC PID Multiplier", 0, {idleMode == 0 && useIacPidMultTable == 1}
|
||||
subMenu = iacCoastingCurve, "Coasting IAC Position for Auto-Idle", 0, {useIacTableForCoasting == 1}
|
||||
subMenu = std_separator
|
||||
subMenu = idleVeCurve, "VE", 0, {useSeparateVeForIdle == 1}
|
||||
subMenu = idleAdvanceCurve, "Ignition advance", 0, {useSeparateAdvanceForIdle == 1}
|
||||
subMenu = std_separator
|
||||
subMenu = idleTimingPidCorrDialog, "Closed-loop idle timing"
|
||||
subMenu = cltIdleCurve, "CLT multiplier"
|
||||
subMenu = iacCoastingCurve, "Coasting IAC Position for Auto-Idle", 0, {useIacTableForCoasting == 1}
|
||||
|
||||
menu = "&Advanced"
|
||||
subMenu = boostDialog, "Boost Control"
|
||||
|
|
@ -3879,11 +3880,11 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
|
|||
field = "!ECU reboot needed to apply these settings"
|
||||
field = "Use Stepper", useStepperIdle
|
||||
field = "Double Solenoid Mode", isDoubleSolenoidIdle
|
||||
field = "Use electronic throttle for idle", useETBforIdleControl, { throttlePedalPositionAdcChannel != 0 }
|
||||
field = "Electronic throttle idle range", etbIdleThrottleRange, { useETBforIdleControl == 1 }
|
||||
panel = idleHwType
|
||||
|
||||
dialog = idlePidSettings, "PID IAC Control"
|
||||
field = "#See Idle Target RPM Curve"
|
||||
field = "use Cic Pid", useCicPidForIdle
|
||||
dialog = idlePidSettings, "Closed Loop Idle"
|
||||
field = "P-factor", idleRpmPid_pFactor
|
||||
field = "I-factor", idleRpmPid_iFactor
|
||||
field = "derivativeFilterLoss", idle_derivativeFilterLoss
|
||||
|
|
@ -3896,43 +3897,48 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
|
|||
field = "Max", idleRpmPid_maxValue
|
||||
field = "iTerm Min", idlerpmpid_iTermMin
|
||||
field = "iTerm Max", idlerpmpid_iTermMax
|
||||
field = "RPM dead zone to deactivate IAC pid", idlePidRpmDeadZone
|
||||
field = "RPM upper limit to deactivate IAC pid",idlePidRpmUpperLimit
|
||||
field = "PID Extra for low RPM", pidExtraForLowRpm
|
||||
field = "Use IAC PID Multiplier Table", useIacPidMultTable
|
||||
|
||||
|
||||
dialog = idleSettings, "", yAxis
|
||||
field = "Idle IAC control mode", idleMode
|
||||
field = useInstantRpmForIdle, useInstantRpmForIdle
|
||||
field = "use ETB for idle", useETBforIdleControl, { throttlePedalPositionAdcChannel != 0 }
|
||||
field = "ETB Idle range", etbIdleThrottleRange, {useETBforIdleControl == 1}
|
||||
field = "Use separate Ignition Table for idle", useSeparateAdvanceForIdle
|
||||
field = "Use separate VE Table for idle", useSeparateVeForIdle
|
||||
field = "Use separate IAC Table For Coasting", useIacTableForCoasting, {idleMode == 0}
|
||||
field = idleIncrementalPidCic, idleIncrementalPidCic
|
||||
field = "TPS deactivation threshold", idlePidDeactivationTpsThreshold
|
||||
field = "use Cic Pid", useCicPidForIdle
|
||||
field = "Use IAC PID Multiplier Table", useIacPidMultTable
|
||||
|
||||
dialog = idleGating, "Idle Detection Thresholds"
|
||||
field = "TPS threshold", idlePidDeactivationTpsThreshold
|
||||
field = "RPM upper limit", idlePidRpmUpperLimit
|
||||
field = "RPM dead zone", idlePidRpmDeadZone
|
||||
|
||||
dialog = idleExtra, "Extra Idle Features"
|
||||
field = "Extra idle air if throttle pressed", iacByTpsTaper
|
||||
field = "Use idle ignition table", useSeparateAdvanceForIdle
|
||||
field = "Use idle VE table", useSeparateVeForIdle
|
||||
field = "Use coasting idle table", useIacTableForCoasting, {idleMode == 0}
|
||||
field = useInstantRpmForIdle, useInstantRpmForIdle
|
||||
field = "Detailed status in console", isVerboseIAC
|
||||
|
||||
dialog = idleSettings, "", yAxis
|
||||
field = "Idle control mode", idleMode
|
||||
|
||||
field = "! Solenoid idle control requires above zero RPM"
|
||||
slider = "Open loop idle position", manIdlePosition, horizontal
|
||||
field = ""
|
||||
|
||||
panel = idleGating, ""
|
||||
panel = idlePidSettings, { idleMode == 0}
|
||||
field = "Extra IAC if Throttle Pressed", iacByTpsTaper;
|
||||
field = "Detailed status in console", isVerboseIAC
|
||||
field = "#See Warmup idle multiplier"
|
||||
field = "! Solenoid Idle control requires above zero RPM"
|
||||
slider = "Manual IAC Position", manIdlePosition, horizontal
|
||||
panel = idleExtra
|
||||
|
||||
dialog = idleTimingPidCorrDialog, "", yAxis
|
||||
field = "!This timing correction mode is Alpha Version"
|
||||
field = "Use Auto-PID ignition advance control", useIdleTimingPidControl
|
||||
field = "#See Idle Target RPM Curve"
|
||||
field = "P-factor", idleTimingPid_pFactor, {useIdleTimingPidControl == 1}
|
||||
field = "I-factor", idleTimingPid_iFactor, {useIdleTimingPidControl == 1}
|
||||
field = "D-factor", idleTimingPid_dFactor, {useIdleTimingPidControl == 1}
|
||||
field = "Offset", idleTimingPid_offset, {useIdleTimingPidControl == 1}
|
||||
field = "Min Delta", idleTimingPid_minValue, {useIdleTimingPidControl == 1}
|
||||
field = "Max Delta", idleTimingPid_maxValue, {useIdleTimingPidControl == 1}
|
||||
field = "#See RPM dead zone to deactivate IAC pid"
|
||||
field = "RPM working zone for timing pid", idleTimingPidWorkZone, {useIdleTimingPidControl == 1}
|
||||
field = "RPM working zone falloff", idlePidFalloffDeltaRpm, {useIdleTimingPidControl == 1}
|
||||
field = "RPM dead zone to deactivate timing pid", idleTimingPidDeadZone, {useIdleTimingPidControl == 1}
|
||||
field = ""
|
||||
field = "Enable closed loop idle ignition timing", useIdleTimingPidControl
|
||||
field = ""
|
||||
field = "#Gain is in degrees advance per rpm away from target"
|
||||
field = "#A good starting point is 0.1 = 10 deg per 100 rpm"
|
||||
field = "Proportional gain", idleTimingPid_pFactor, {useIdleTimingPidControl == 1}
|
||||
field = "Derivative gain", idleTimingPid_dFactor, {useIdleTimingPidControl == 1}
|
||||
field = ""
|
||||
field = "Min adjustment (retard)", idleTimingPid_minValue, {useIdleTimingPidControl == 1}
|
||||
field = "Max adjustment (advance)", idleTimingPid_maxValue, {useIdleTimingPidControl == 1}
|
||||
field = ""
|
||||
field = "#Use debug mode 'Timing' to view idle timing adjustment"
|
||||
|
||||
; Engine->Fan Settings
|
||||
dialog = fanSetting, "Fan Settings"
|
||||
|
|
|
|||
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI 2020.12.26.frankenso_na6.2577268464"
|
||||
signature = "rusEFI 2020.12.30.frankenso_na6.941342210"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmwave version for title bar.
|
||||
signature = "rusEFI 2020.12.26.frankenso_na6.2577268464" ; signature is expected to be 7 or more characters.
|
||||
signature = "rusEFI 2020.12.30.frankenso_na6.941342210" ; signature is expected to be 7 or more characters.
|
||||
|
||||
[Constants]
|
||||
; new packet serial format with CRC
|
||||
|
|
@ -77,7 +77,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Dec 26 21:17:43 UTC 2020
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Dec 30 13:37:19 UTC 2020
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -1336,6 +1336,7 @@ page = 1
|
|||
acIdleExtraMin = "Additional idle PID minValue while A/C is active"
|
||||
acFanPin = "Optional Radiator Fan used with A/C"
|
||||
sdCardPeriodMs = "SD card logging period, in milliseconds"
|
||||
idlePidDeactivationTpsThreshold = "Below this throttle position, the engine is considered idling."
|
||||
triggerErrorPin = "This pin is used for debugging - snap a logic analyzer on it and see if it's ever high"
|
||||
cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module"
|
||||
sensorChartMode = "rusEfi console Sensor Sniffer mode"
|
||||
|
|
@ -2796,16 +2797,16 @@ menuDialog = main
|
|||
menu = "&Idle"
|
||||
subMenu = idleSettings, "Idle settings"
|
||||
subMenu = idlehw, "Idle hardware"
|
||||
subMenu = std_separator
|
||||
subMenu = cltIdleRPMCurve, "Target RPM", 0, {idleMode == 0}
|
||||
subMenu = std_separator
|
||||
subMenu = cltIdleRPMCurve, "Target RPM"
|
||||
subMenu = cltIdleCurve, "CLT multiplier"
|
||||
subMenu = std_separator
|
||||
subMenu = idleTimingPidCorrDialog, "Closed-loop idle timing"
|
||||
subMenu = iacPidMultTbl, "IAC PID Multiplier", 0, {idleMode == 0 && useIacPidMultTable == 1}
|
||||
subMenu = iacCoastingCurve, "Coasting IAC Position for Auto-Idle", 0, {useIacTableForCoasting == 1}
|
||||
subMenu = std_separator
|
||||
subMenu = idleVeCurve, "VE", 0, {useSeparateVeForIdle == 1}
|
||||
subMenu = idleAdvanceCurve, "Ignition advance", 0, {useSeparateAdvanceForIdle == 1}
|
||||
subMenu = std_separator
|
||||
subMenu = idleTimingPidCorrDialog, "Closed-loop idle timing"
|
||||
subMenu = cltIdleCurve, "CLT multiplier"
|
||||
subMenu = iacCoastingCurve, "Coasting IAC Position for Auto-Idle", 0, {useIacTableForCoasting == 1}
|
||||
|
||||
menu = "&Advanced"
|
||||
subMenu = boostDialog, "Boost Control"
|
||||
|
|
@ -3879,11 +3880,11 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
|
|||
field = "!ECU reboot needed to apply these settings"
|
||||
field = "Use Stepper", useStepperIdle
|
||||
field = "Double Solenoid Mode", isDoubleSolenoidIdle
|
||||
field = "Use electronic throttle for idle", useETBforIdleControl, { throttlePedalPositionAdcChannel != 0 }
|
||||
field = "Electronic throttle idle range", etbIdleThrottleRange, { useETBforIdleControl == 1 }
|
||||
panel = idleHwType
|
||||
|
||||
dialog = idlePidSettings, "PID IAC Control"
|
||||
field = "#See Idle Target RPM Curve"
|
||||
field = "use Cic Pid", useCicPidForIdle
|
||||
dialog = idlePidSettings, "Closed Loop Idle"
|
||||
field = "P-factor", idleRpmPid_pFactor
|
||||
field = "I-factor", idleRpmPid_iFactor
|
||||
field = "derivativeFilterLoss", idle_derivativeFilterLoss
|
||||
|
|
@ -3896,43 +3897,48 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
|
|||
field = "Max", idleRpmPid_maxValue
|
||||
field = "iTerm Min", idlerpmpid_iTermMin
|
||||
field = "iTerm Max", idlerpmpid_iTermMax
|
||||
field = "RPM dead zone to deactivate IAC pid", idlePidRpmDeadZone
|
||||
field = "RPM upper limit to deactivate IAC pid",idlePidRpmUpperLimit
|
||||
field = "PID Extra for low RPM", pidExtraForLowRpm
|
||||
field = "Use IAC PID Multiplier Table", useIacPidMultTable
|
||||
|
||||
|
||||
dialog = idleSettings, "", yAxis
|
||||
field = "Idle IAC control mode", idleMode
|
||||
field = useInstantRpmForIdle, useInstantRpmForIdle
|
||||
field = "use ETB for idle", useETBforIdleControl, { throttlePedalPositionAdcChannel != 0 }
|
||||
field = "ETB Idle range", etbIdleThrottleRange, {useETBforIdleControl == 1}
|
||||
field = "Use separate Ignition Table for idle", useSeparateAdvanceForIdle
|
||||
field = "Use separate VE Table for idle", useSeparateVeForIdle
|
||||
field = "Use separate IAC Table For Coasting", useIacTableForCoasting, {idleMode == 0}
|
||||
field = idleIncrementalPidCic, idleIncrementalPidCic
|
||||
field = "TPS deactivation threshold", idlePidDeactivationTpsThreshold
|
||||
field = "use Cic Pid", useCicPidForIdle
|
||||
field = "Use IAC PID Multiplier Table", useIacPidMultTable
|
||||
|
||||
dialog = idleGating, "Idle Detection Thresholds"
|
||||
field = "TPS threshold", idlePidDeactivationTpsThreshold
|
||||
field = "RPM upper limit", idlePidRpmUpperLimit
|
||||
field = "RPM dead zone", idlePidRpmDeadZone
|
||||
|
||||
dialog = idleExtra, "Extra Idle Features"
|
||||
field = "Extra idle air if throttle pressed", iacByTpsTaper
|
||||
field = "Use idle ignition table", useSeparateAdvanceForIdle
|
||||
field = "Use idle VE table", useSeparateVeForIdle
|
||||
field = "Use coasting idle table", useIacTableForCoasting, {idleMode == 0}
|
||||
field = useInstantRpmForIdle, useInstantRpmForIdle
|
||||
field = "Detailed status in console", isVerboseIAC
|
||||
|
||||
dialog = idleSettings, "", yAxis
|
||||
field = "Idle control mode", idleMode
|
||||
|
||||
field = "! Solenoid idle control requires above zero RPM"
|
||||
slider = "Open loop idle position", manIdlePosition, horizontal
|
||||
field = ""
|
||||
|
||||
panel = idleGating, ""
|
||||
panel = idlePidSettings, { idleMode == 0}
|
||||
field = "Extra IAC if Throttle Pressed", iacByTpsTaper;
|
||||
field = "Detailed status in console", isVerboseIAC
|
||||
field = "#See Warmup idle multiplier"
|
||||
field = "! Solenoid Idle control requires above zero RPM"
|
||||
slider = "Manual IAC Position", manIdlePosition, horizontal
|
||||
panel = idleExtra
|
||||
|
||||
dialog = idleTimingPidCorrDialog, "", yAxis
|
||||
field = "!This timing correction mode is Alpha Version"
|
||||
field = "Use Auto-PID ignition advance control", useIdleTimingPidControl
|
||||
field = "#See Idle Target RPM Curve"
|
||||
field = "P-factor", idleTimingPid_pFactor, {useIdleTimingPidControl == 1}
|
||||
field = "I-factor", idleTimingPid_iFactor, {useIdleTimingPidControl == 1}
|
||||
field = "D-factor", idleTimingPid_dFactor, {useIdleTimingPidControl == 1}
|
||||
field = "Offset", idleTimingPid_offset, {useIdleTimingPidControl == 1}
|
||||
field = "Min Delta", idleTimingPid_minValue, {useIdleTimingPidControl == 1}
|
||||
field = "Max Delta", idleTimingPid_maxValue, {useIdleTimingPidControl == 1}
|
||||
field = "#See RPM dead zone to deactivate IAC pid"
|
||||
field = "RPM working zone for timing pid", idleTimingPidWorkZone, {useIdleTimingPidControl == 1}
|
||||
field = "RPM working zone falloff", idlePidFalloffDeltaRpm, {useIdleTimingPidControl == 1}
|
||||
field = "RPM dead zone to deactivate timing pid", idleTimingPidDeadZone, {useIdleTimingPidControl == 1}
|
||||
field = ""
|
||||
field = "Enable closed loop idle ignition timing", useIdleTimingPidControl
|
||||
field = ""
|
||||
field = "#Gain is in degrees advance per rpm away from target"
|
||||
field = "#A good starting point is 0.1 = 10 deg per 100 rpm"
|
||||
field = "Proportional gain", idleTimingPid_pFactor, {useIdleTimingPidControl == 1}
|
||||
field = "Derivative gain", idleTimingPid_dFactor, {useIdleTimingPidControl == 1}
|
||||
field = ""
|
||||
field = "Min adjustment (retard)", idleTimingPid_minValue, {useIdleTimingPidControl == 1}
|
||||
field = "Max adjustment (advance)", idleTimingPid_maxValue, {useIdleTimingPidControl == 1}
|
||||
field = ""
|
||||
field = "#Use debug mode 'Timing' to view idle timing adjustment"
|
||||
|
||||
; Engine->Fan Settings
|
||||
dialog = fanSetting, "Fan Settings"
|
||||
|
|
|
|||
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI 2020.12.26.hellen_cypress.3323783624"
|
||||
signature = "rusEFI 2020.12.30.hellen_cypress.1738189114"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmwave version for title bar.
|
||||
signature = "rusEFI 2020.12.26.hellen_cypress.3323783624" ; signature is expected to be 7 or more characters.
|
||||
signature = "rusEFI 2020.12.30.hellen_cypress.1738189114" ; signature is expected to be 7 or more characters.
|
||||
|
||||
[Constants]
|
||||
; new packet serial format with CRC
|
||||
|
|
@ -77,7 +77,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Sat Dec 26 21:18:00 UTC 2020
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Wed Dec 30 13:37:33 UTC 2020
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -1336,6 +1336,7 @@ page = 1
|
|||
acIdleExtraMin = "Additional idle PID minValue while A/C is active"
|
||||
acFanPin = "Optional Radiator Fan used with A/C"
|
||||
sdCardPeriodMs = "SD card logging period, in milliseconds"
|
||||
idlePidDeactivationTpsThreshold = "Below this throttle position, the engine is considered idling."
|
||||
triggerErrorPin = "This pin is used for debugging - snap a logic analyzer on it and see if it's ever high"
|
||||
cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module"
|
||||
sensorChartMode = "rusEfi console Sensor Sniffer mode"
|
||||
|
|
@ -2796,16 +2797,16 @@ menuDialog = main
|
|||
menu = "&Idle"
|
||||
subMenu = idleSettings, "Idle settings"
|
||||
subMenu = idlehw, "Idle hardware"
|
||||
subMenu = std_separator
|
||||
subMenu = cltIdleRPMCurve, "Target RPM", 0, {idleMode == 0}
|
||||
subMenu = std_separator
|
||||
subMenu = cltIdleRPMCurve, "Target RPM"
|
||||
subMenu = cltIdleCurve, "CLT multiplier"
|
||||
subMenu = std_separator
|
||||
subMenu = idleTimingPidCorrDialog, "Closed-loop idle timing"
|
||||
subMenu = iacPidMultTbl, "IAC PID Multiplier", 0, {idleMode == 0 && useIacPidMultTable == 1}
|
||||
subMenu = iacCoastingCurve, "Coasting IAC Position for Auto-Idle", 0, {useIacTableForCoasting == 1}
|
||||
subMenu = std_separator
|
||||
subMenu = idleVeCurve, "VE", 0, {useSeparateVeForIdle == 1}
|
||||
subMenu = idleAdvanceCurve, "Ignition advance", 0, {useSeparateAdvanceForIdle == 1}
|
||||
subMenu = std_separator
|
||||
subMenu = idleTimingPidCorrDialog, "Closed-loop idle timing"
|
||||
subMenu = cltIdleCurve, "CLT multiplier"
|
||||
subMenu = iacCoastingCurve, "Coasting IAC Position for Auto-Idle", 0, {useIacTableForCoasting == 1}
|
||||
|
||||
menu = "&Advanced"
|
||||
subMenu = boostDialog, "Boost Control"
|
||||
|
|
@ -3879,11 +3880,11 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
|
|||
field = "!ECU reboot needed to apply these settings"
|
||||
field = "Use Stepper", useStepperIdle
|
||||
field = "Double Solenoid Mode", isDoubleSolenoidIdle
|
||||
field = "Use electronic throttle for idle", useETBforIdleControl, { throttlePedalPositionAdcChannel != 0 }
|
||||
field = "Electronic throttle idle range", etbIdleThrottleRange, { useETBforIdleControl == 1 }
|
||||
panel = idleHwType
|
||||
|
||||
dialog = idlePidSettings, "PID IAC Control"
|
||||
field = "#See Idle Target RPM Curve"
|
||||
field = "use Cic Pid", useCicPidForIdle
|
||||
dialog = idlePidSettings, "Closed Loop Idle"
|
||||
field = "P-factor", idleRpmPid_pFactor
|
||||
field = "I-factor", idleRpmPid_iFactor
|
||||
field = "derivativeFilterLoss", idle_derivativeFilterLoss
|
||||
|
|
@ -3896,43 +3897,48 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
|
|||
field = "Max", idleRpmPid_maxValue
|
||||
field = "iTerm Min", idlerpmpid_iTermMin
|
||||
field = "iTerm Max", idlerpmpid_iTermMax
|
||||
field = "RPM dead zone to deactivate IAC pid", idlePidRpmDeadZone
|
||||
field = "RPM upper limit to deactivate IAC pid",idlePidRpmUpperLimit
|
||||
field = "PID Extra for low RPM", pidExtraForLowRpm
|
||||
field = "Use IAC PID Multiplier Table", useIacPidMultTable
|
||||
|
||||
|
||||
dialog = idleSettings, "", yAxis
|
||||
field = "Idle IAC control mode", idleMode
|
||||
field = useInstantRpmForIdle, useInstantRpmForIdle
|
||||
field = "use ETB for idle", useETBforIdleControl, { throttlePedalPositionAdcChannel != 0 }
|
||||
field = "ETB Idle range", etbIdleThrottleRange, {useETBforIdleControl == 1}
|
||||
field = "Use separate Ignition Table for idle", useSeparateAdvanceForIdle
|
||||
field = "Use separate VE Table for idle", useSeparateVeForIdle
|
||||
field = "Use separate IAC Table For Coasting", useIacTableForCoasting, {idleMode == 0}
|
||||
field = idleIncrementalPidCic, idleIncrementalPidCic
|
||||
field = "TPS deactivation threshold", idlePidDeactivationTpsThreshold
|
||||
field = "use Cic Pid", useCicPidForIdle
|
||||
field = "Use IAC PID Multiplier Table", useIacPidMultTable
|
||||
|
||||
dialog = idleGating, "Idle Detection Thresholds"
|
||||
field = "TPS threshold", idlePidDeactivationTpsThreshold
|
||||
field = "RPM upper limit", idlePidRpmUpperLimit
|
||||
field = "RPM dead zone", idlePidRpmDeadZone
|
||||
|
||||
dialog = idleExtra, "Extra Idle Features"
|
||||
field = "Extra idle air if throttle pressed", iacByTpsTaper
|
||||
field = "Use idle ignition table", useSeparateAdvanceForIdle
|
||||
field = "Use idle VE table", useSeparateVeForIdle
|
||||
field = "Use coasting idle table", useIacTableForCoasting, {idleMode == 0}
|
||||
field = useInstantRpmForIdle, useInstantRpmForIdle
|
||||
field = "Detailed status in console", isVerboseIAC
|
||||
|
||||
dialog = idleSettings, "", yAxis
|
||||
field = "Idle control mode", idleMode
|
||||
|
||||
field = "! Solenoid idle control requires above zero RPM"
|
||||
slider = "Open loop idle position", manIdlePosition, horizontal
|
||||
field = ""
|
||||
|
||||
panel = idleGating, ""
|
||||
panel = idlePidSettings, { idleMode == 0}
|
||||
field = "Extra IAC if Throttle Pressed", iacByTpsTaper;
|
||||
field = "Detailed status in console", isVerboseIAC
|
||||
field = "#See Warmup idle multiplier"
|
||||
field = "! Solenoid Idle control requires above zero RPM"
|
||||
slider = "Manual IAC Position", manIdlePosition, horizontal
|
||||
panel = idleExtra
|
||||
|
||||
dialog = idleTimingPidCorrDialog, "", yAxis
|
||||
field = "!This timing correction mode is Alpha Version"
|
||||
field = "Use Auto-PID ignition advance control", useIdleTimingPidControl
|
||||
field = "#See Idle Target RPM Curve"
|
||||
field = "P-factor", idleTimingPid_pFactor, {useIdleTimingPidControl == 1}
|
||||
field = "I-factor", idleTimingPid_iFactor, {useIdleTimingPidControl == 1}
|
||||
field = "D-factor", idleTimingPid_dFactor, {useIdleTimingPidControl == 1}
|
||||
field = "Offset", idleTimingPid_offset, {useIdleTimingPidControl == 1}
|
||||
field = "Min Delta", idleTimingPid_minValue, {useIdleTimingPidControl == 1}
|
||||
field = "Max Delta", idleTimingPid_maxValue, {useIdleTimingPidControl == 1}
|
||||
field = "#See RPM dead zone to deactivate IAC pid"
|
||||
field = "RPM working zone for timing pid", idleTimingPidWorkZone, {useIdleTimingPidControl == 1}
|
||||
field = "RPM working zone falloff", idlePidFalloffDeltaRpm, {useIdleTimingPidControl == 1}
|
||||
field = "RPM dead zone to deactivate timing pid", idleTimingPidDeadZone, {useIdleTimingPidControl == 1}
|
||||
field = ""
|
||||
field = "Enable closed loop idle ignition timing", useIdleTimingPidControl
|
||||
field = ""
|
||||
field = "#Gain is in degrees advance per rpm away from target"
|
||||
field = "#A good starting point is 0.1 = 10 deg per 100 rpm"
|
||||
field = "Proportional gain", idleTimingPid_pFactor, {useIdleTimingPidControl == 1}
|
||||
field = "Derivative gain", idleTimingPid_dFactor, {useIdleTimingPidControl == 1}
|
||||
field = ""
|
||||
field = "Min adjustment (retard)", idleTimingPid_minValue, {useIdleTimingPidControl == 1}
|
||||
field = "Max adjustment (advance)", idleTimingPid_maxValue, {useIdleTimingPidControl == 1}
|
||||
field = ""
|
||||
field = "#Use debug mode 'Timing' to view idle timing adjustment"
|
||||
|
||||
; Engine->Fan Settings
|
||||
dialog = fanSetting, "Fan Settings"
|
||||
|
|
|
|||
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI 2020.12.26.kin.2533413682"
|
||||
signature = "rusEFI 2020.12.30.kin.914789312"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmwave version for title bar.
|
||||
signature = "rusEFI 2020.12.26.kin.2533413682" ; signature is expected to be 7 or more characters.
|
||||
signature = "rusEFI 2020.12.30.kin.914789312" ; signature is expected to be 7 or more characters.
|
||||
|
||||
[Constants]
|
||||
; new packet serial format with CRC
|
||||
|
|
@ -77,7 +77,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Sat Dec 26 21:17:51 UTC 2020
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Wed Dec 30 13:37:29 UTC 2020
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -1336,6 +1336,7 @@ page = 1
|
|||
acIdleExtraMin = "Additional idle PID minValue while A/C is active"
|
||||
acFanPin = "Optional Radiator Fan used with A/C"
|
||||
sdCardPeriodMs = "SD card logging period, in milliseconds"
|
||||
idlePidDeactivationTpsThreshold = "Below this throttle position, the engine is considered idling."
|
||||
triggerErrorPin = "This pin is used for debugging - snap a logic analyzer on it and see if it's ever high"
|
||||
cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module"
|
||||
sensorChartMode = "rusEfi console Sensor Sniffer mode"
|
||||
|
|
@ -2796,16 +2797,16 @@ menuDialog = main
|
|||
menu = "&Idle"
|
||||
subMenu = idleSettings, "Idle settings"
|
||||
subMenu = idlehw, "Idle hardware"
|
||||
subMenu = std_separator
|
||||
subMenu = cltIdleRPMCurve, "Target RPM", 0, {idleMode == 0}
|
||||
subMenu = std_separator
|
||||
subMenu = cltIdleRPMCurve, "Target RPM"
|
||||
subMenu = cltIdleCurve, "CLT multiplier"
|
||||
subMenu = std_separator
|
||||
subMenu = idleTimingPidCorrDialog, "Closed-loop idle timing"
|
||||
subMenu = iacPidMultTbl, "IAC PID Multiplier", 0, {idleMode == 0 && useIacPidMultTable == 1}
|
||||
subMenu = iacCoastingCurve, "Coasting IAC Position for Auto-Idle", 0, {useIacTableForCoasting == 1}
|
||||
subMenu = std_separator
|
||||
subMenu = idleVeCurve, "VE", 0, {useSeparateVeForIdle == 1}
|
||||
subMenu = idleAdvanceCurve, "Ignition advance", 0, {useSeparateAdvanceForIdle == 1}
|
||||
subMenu = std_separator
|
||||
subMenu = idleTimingPidCorrDialog, "Closed-loop idle timing"
|
||||
subMenu = cltIdleCurve, "CLT multiplier"
|
||||
subMenu = iacCoastingCurve, "Coasting IAC Position for Auto-Idle", 0, {useIacTableForCoasting == 1}
|
||||
|
||||
menu = "&Advanced"
|
||||
subMenu = boostDialog, "Boost Control"
|
||||
|
|
@ -3880,11 +3881,11 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
|
|||
field = "!ECU reboot needed to apply these settings"
|
||||
field = "Use Stepper", useStepperIdle
|
||||
field = "Double Solenoid Mode", isDoubleSolenoidIdle
|
||||
field = "Use electronic throttle for idle", useETBforIdleControl, { throttlePedalPositionAdcChannel != 0 }
|
||||
field = "Electronic throttle idle range", etbIdleThrottleRange, { useETBforIdleControl == 1 }
|
||||
panel = idleHwType
|
||||
|
||||
dialog = idlePidSettings, "PID IAC Control"
|
||||
field = "#See Idle Target RPM Curve"
|
||||
field = "use Cic Pid", useCicPidForIdle
|
||||
dialog = idlePidSettings, "Closed Loop Idle"
|
||||
field = "P-factor", idleRpmPid_pFactor
|
||||
field = "I-factor", idleRpmPid_iFactor
|
||||
field = "derivativeFilterLoss", idle_derivativeFilterLoss
|
||||
|
|
@ -3897,43 +3898,48 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
|
|||
field = "Max", idleRpmPid_maxValue
|
||||
field = "iTerm Min", idlerpmpid_iTermMin
|
||||
field = "iTerm Max", idlerpmpid_iTermMax
|
||||
field = "RPM dead zone to deactivate IAC pid", idlePidRpmDeadZone
|
||||
field = "RPM upper limit to deactivate IAC pid",idlePidRpmUpperLimit
|
||||
field = "PID Extra for low RPM", pidExtraForLowRpm
|
||||
field = "Use IAC PID Multiplier Table", useIacPidMultTable
|
||||
|
||||
|
||||
dialog = idleSettings, "", yAxis
|
||||
field = "Idle IAC control mode", idleMode
|
||||
field = useInstantRpmForIdle, useInstantRpmForIdle
|
||||
field = "use ETB for idle", useETBforIdleControl, { throttlePedalPositionAdcChannel != 0 }
|
||||
field = "ETB Idle range", etbIdleThrottleRange, {useETBforIdleControl == 1}
|
||||
field = "Use separate Ignition Table for idle", useSeparateAdvanceForIdle
|
||||
field = "Use separate VE Table for idle", useSeparateVeForIdle
|
||||
field = "Use separate IAC Table For Coasting", useIacTableForCoasting, {idleMode == 0}
|
||||
field = idleIncrementalPidCic, idleIncrementalPidCic
|
||||
field = "TPS deactivation threshold", idlePidDeactivationTpsThreshold
|
||||
field = "use Cic Pid", useCicPidForIdle
|
||||
field = "Use IAC PID Multiplier Table", useIacPidMultTable
|
||||
|
||||
dialog = idleGating, "Idle Detection Thresholds"
|
||||
field = "TPS threshold", idlePidDeactivationTpsThreshold
|
||||
field = "RPM upper limit", idlePidRpmUpperLimit
|
||||
field = "RPM dead zone", idlePidRpmDeadZone
|
||||
|
||||
dialog = idleExtra, "Extra Idle Features"
|
||||
field = "Extra idle air if throttle pressed", iacByTpsTaper
|
||||
field = "Use idle ignition table", useSeparateAdvanceForIdle
|
||||
field = "Use idle VE table", useSeparateVeForIdle
|
||||
field = "Use coasting idle table", useIacTableForCoasting, {idleMode == 0}
|
||||
field = useInstantRpmForIdle, useInstantRpmForIdle
|
||||
field = "Detailed status in console", isVerboseIAC
|
||||
|
||||
dialog = idleSettings, "", yAxis
|
||||
field = "Idle control mode", idleMode
|
||||
|
||||
field = "! Solenoid idle control requires above zero RPM"
|
||||
slider = "Open loop idle position", manIdlePosition, horizontal
|
||||
field = ""
|
||||
|
||||
panel = idleGating, ""
|
||||
panel = idlePidSettings, { idleMode == 0}
|
||||
field = "Extra IAC if Throttle Pressed", iacByTpsTaper;
|
||||
field = "Detailed status in console", isVerboseIAC
|
||||
field = "#See Warmup idle multiplier"
|
||||
field = "! Solenoid Idle control requires above zero RPM"
|
||||
slider = "Manual IAC Position", manIdlePosition, horizontal
|
||||
panel = idleExtra
|
||||
|
||||
dialog = idleTimingPidCorrDialog, "", yAxis
|
||||
field = "!This timing correction mode is Alpha Version"
|
||||
field = "Use Auto-PID ignition advance control", useIdleTimingPidControl
|
||||
field = "#See Idle Target RPM Curve"
|
||||
field = "P-factor", idleTimingPid_pFactor, {useIdleTimingPidControl == 1}
|
||||
field = "I-factor", idleTimingPid_iFactor, {useIdleTimingPidControl == 1}
|
||||
field = "D-factor", idleTimingPid_dFactor, {useIdleTimingPidControl == 1}
|
||||
field = "Offset", idleTimingPid_offset, {useIdleTimingPidControl == 1}
|
||||
field = "Min Delta", idleTimingPid_minValue, {useIdleTimingPidControl == 1}
|
||||
field = "Max Delta", idleTimingPid_maxValue, {useIdleTimingPidControl == 1}
|
||||
field = "#See RPM dead zone to deactivate IAC pid"
|
||||
field = "RPM working zone for timing pid", idleTimingPidWorkZone, {useIdleTimingPidControl == 1}
|
||||
field = "RPM working zone falloff", idlePidFalloffDeltaRpm, {useIdleTimingPidControl == 1}
|
||||
field = "RPM dead zone to deactivate timing pid", idleTimingPidDeadZone, {useIdleTimingPidControl == 1}
|
||||
field = ""
|
||||
field = "Enable closed loop idle ignition timing", useIdleTimingPidControl
|
||||
field = ""
|
||||
field = "#Gain is in degrees advance per rpm away from target"
|
||||
field = "#A good starting point is 0.1 = 10 deg per 100 rpm"
|
||||
field = "Proportional gain", idleTimingPid_pFactor, {useIdleTimingPidControl == 1}
|
||||
field = "Derivative gain", idleTimingPid_dFactor, {useIdleTimingPidControl == 1}
|
||||
field = ""
|
||||
field = "Min adjustment (retard)", idleTimingPid_minValue, {useIdleTimingPidControl == 1}
|
||||
field = "Max adjustment (advance)", idleTimingPid_maxValue, {useIdleTimingPidControl == 1}
|
||||
field = ""
|
||||
field = "#Use debug mode 'Timing' to view idle timing adjustment"
|
||||
|
||||
; Engine->Fan Settings
|
||||
dialog = fanSetting, "Fan Settings"
|
||||
|
|
|
|||
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI 2020.12.26.mre_f4.406688114"
|
||||
signature = "rusEFI 2020.12.30.mre_f4.3116093824"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmwave version for title bar.
|
||||
signature = "rusEFI 2020.12.26.mre_f4.406688114" ; signature is expected to be 7 or more characters.
|
||||
signature = "rusEFI 2020.12.30.mre_f4.3116093824" ; signature is expected to be 7 or more characters.
|
||||
|
||||
[Constants]
|
||||
; new packet serial format with CRC
|
||||
|
|
@ -77,7 +77,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Dec 26 21:17:41 UTC 2020
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Dec 30 13:37:17 UTC 2020
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -1336,6 +1336,7 @@ page = 1
|
|||
acIdleExtraMin = "Additional idle PID minValue while A/C is active"
|
||||
acFanPin = "Optional Radiator Fan used with A/C"
|
||||
sdCardPeriodMs = "SD card logging period, in milliseconds"
|
||||
idlePidDeactivationTpsThreshold = "Below this throttle position, the engine is considered idling."
|
||||
triggerErrorPin = "This pin is used for debugging - snap a logic analyzer on it and see if it's ever high"
|
||||
cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module"
|
||||
sensorChartMode = "rusEfi console Sensor Sniffer mode"
|
||||
|
|
@ -2796,16 +2797,16 @@ menuDialog = main
|
|||
menu = "&Idle"
|
||||
subMenu = idleSettings, "Idle settings"
|
||||
subMenu = idlehw, "Idle hardware"
|
||||
subMenu = std_separator
|
||||
subMenu = cltIdleRPMCurve, "Target RPM", 0, {idleMode == 0}
|
||||
subMenu = std_separator
|
||||
subMenu = cltIdleRPMCurve, "Target RPM"
|
||||
subMenu = cltIdleCurve, "CLT multiplier"
|
||||
subMenu = std_separator
|
||||
subMenu = idleTimingPidCorrDialog, "Closed-loop idle timing"
|
||||
subMenu = iacPidMultTbl, "IAC PID Multiplier", 0, {idleMode == 0 && useIacPidMultTable == 1}
|
||||
subMenu = iacCoastingCurve, "Coasting IAC Position for Auto-Idle", 0, {useIacTableForCoasting == 1}
|
||||
subMenu = std_separator
|
||||
subMenu = idleVeCurve, "VE", 0, {useSeparateVeForIdle == 1}
|
||||
subMenu = idleAdvanceCurve, "Ignition advance", 0, {useSeparateAdvanceForIdle == 1}
|
||||
subMenu = std_separator
|
||||
subMenu = idleTimingPidCorrDialog, "Closed-loop idle timing"
|
||||
subMenu = cltIdleCurve, "CLT multiplier"
|
||||
subMenu = iacCoastingCurve, "Coasting IAC Position for Auto-Idle", 0, {useIacTableForCoasting == 1}
|
||||
|
||||
menu = "&Advanced"
|
||||
subMenu = boostDialog, "Boost Control"
|
||||
|
|
@ -3863,11 +3864,11 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
|
|||
field = "!ECU reboot needed to apply these settings"
|
||||
field = "Use Stepper", useStepperIdle
|
||||
field = "Double Solenoid Mode", isDoubleSolenoidIdle
|
||||
field = "Use electronic throttle for idle", useETBforIdleControl, { throttlePedalPositionAdcChannel != 0 }
|
||||
field = "Electronic throttle idle range", etbIdleThrottleRange, { useETBforIdleControl == 1 }
|
||||
panel = idleHwType
|
||||
|
||||
dialog = idlePidSettings, "PID IAC Control"
|
||||
field = "#See Idle Target RPM Curve"
|
||||
field = "use Cic Pid", useCicPidForIdle
|
||||
dialog = idlePidSettings, "Closed Loop Idle"
|
||||
field = "P-factor", idleRpmPid_pFactor
|
||||
field = "I-factor", idleRpmPid_iFactor
|
||||
field = "derivativeFilterLoss", idle_derivativeFilterLoss
|
||||
|
|
@ -3880,43 +3881,48 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
|
|||
field = "Max", idleRpmPid_maxValue
|
||||
field = "iTerm Min", idlerpmpid_iTermMin
|
||||
field = "iTerm Max", idlerpmpid_iTermMax
|
||||
field = "RPM dead zone to deactivate IAC pid", idlePidRpmDeadZone
|
||||
field = "RPM upper limit to deactivate IAC pid",idlePidRpmUpperLimit
|
||||
field = "PID Extra for low RPM", pidExtraForLowRpm
|
||||
field = "Use IAC PID Multiplier Table", useIacPidMultTable
|
||||
|
||||
|
||||
dialog = idleSettings, "", yAxis
|
||||
field = "Idle IAC control mode", idleMode
|
||||
field = useInstantRpmForIdle, useInstantRpmForIdle
|
||||
field = "use ETB for idle", useETBforIdleControl, { throttlePedalPositionAdcChannel != 0 }
|
||||
field = "ETB Idle range", etbIdleThrottleRange, {useETBforIdleControl == 1}
|
||||
field = "Use separate Ignition Table for idle", useSeparateAdvanceForIdle
|
||||
field = "Use separate VE Table for idle", useSeparateVeForIdle
|
||||
field = "Use separate IAC Table For Coasting", useIacTableForCoasting, {idleMode == 0}
|
||||
field = idleIncrementalPidCic, idleIncrementalPidCic
|
||||
field = "TPS deactivation threshold", idlePidDeactivationTpsThreshold
|
||||
field = "use Cic Pid", useCicPidForIdle
|
||||
field = "Use IAC PID Multiplier Table", useIacPidMultTable
|
||||
|
||||
dialog = idleGating, "Idle Detection Thresholds"
|
||||
field = "TPS threshold", idlePidDeactivationTpsThreshold
|
||||
field = "RPM upper limit", idlePidRpmUpperLimit
|
||||
field = "RPM dead zone", idlePidRpmDeadZone
|
||||
|
||||
dialog = idleExtra, "Extra Idle Features"
|
||||
field = "Extra idle air if throttle pressed", iacByTpsTaper
|
||||
field = "Use idle ignition table", useSeparateAdvanceForIdle
|
||||
field = "Use idle VE table", useSeparateVeForIdle
|
||||
field = "Use coasting idle table", useIacTableForCoasting, {idleMode == 0}
|
||||
field = useInstantRpmForIdle, useInstantRpmForIdle
|
||||
field = "Detailed status in console", isVerboseIAC
|
||||
|
||||
dialog = idleSettings, "", yAxis
|
||||
field = "Idle control mode", idleMode
|
||||
|
||||
field = "! Solenoid idle control requires above zero RPM"
|
||||
slider = "Open loop idle position", manIdlePosition, horizontal
|
||||
field = ""
|
||||
|
||||
panel = idleGating, ""
|
||||
panel = idlePidSettings, { idleMode == 0}
|
||||
field = "Extra IAC if Throttle Pressed", iacByTpsTaper;
|
||||
field = "Detailed status in console", isVerboseIAC
|
||||
field = "#See Warmup idle multiplier"
|
||||
field = "! Solenoid Idle control requires above zero RPM"
|
||||
slider = "Manual IAC Position", manIdlePosition, horizontal
|
||||
panel = idleExtra
|
||||
|
||||
dialog = idleTimingPidCorrDialog, "", yAxis
|
||||
field = "!This timing correction mode is Alpha Version"
|
||||
field = "Use Auto-PID ignition advance control", useIdleTimingPidControl
|
||||
field = "#See Idle Target RPM Curve"
|
||||
field = "P-factor", idleTimingPid_pFactor, {useIdleTimingPidControl == 1}
|
||||
field = "I-factor", idleTimingPid_iFactor, {useIdleTimingPidControl == 1}
|
||||
field = "D-factor", idleTimingPid_dFactor, {useIdleTimingPidControl == 1}
|
||||
field = "Offset", idleTimingPid_offset, {useIdleTimingPidControl == 1}
|
||||
field = "Min Delta", idleTimingPid_minValue, {useIdleTimingPidControl == 1}
|
||||
field = "Max Delta", idleTimingPid_maxValue, {useIdleTimingPidControl == 1}
|
||||
field = "#See RPM dead zone to deactivate IAC pid"
|
||||
field = "RPM working zone for timing pid", idleTimingPidWorkZone, {useIdleTimingPidControl == 1}
|
||||
field = "RPM working zone falloff", idlePidFalloffDeltaRpm, {useIdleTimingPidControl == 1}
|
||||
field = "RPM dead zone to deactivate timing pid", idleTimingPidDeadZone, {useIdleTimingPidControl == 1}
|
||||
field = ""
|
||||
field = "Enable closed loop idle ignition timing", useIdleTimingPidControl
|
||||
field = ""
|
||||
field = "#Gain is in degrees advance per rpm away from target"
|
||||
field = "#A good starting point is 0.1 = 10 deg per 100 rpm"
|
||||
field = "Proportional gain", idleTimingPid_pFactor, {useIdleTimingPidControl == 1}
|
||||
field = "Derivative gain", idleTimingPid_dFactor, {useIdleTimingPidControl == 1}
|
||||
field = ""
|
||||
field = "Min adjustment (retard)", idleTimingPid_minValue, {useIdleTimingPidControl == 1}
|
||||
field = "Max adjustment (advance)", idleTimingPid_maxValue, {useIdleTimingPidControl == 1}
|
||||
field = ""
|
||||
field = "#Use debug mode 'Timing' to view idle timing adjustment"
|
||||
|
||||
; Engine->Fan Settings
|
||||
dialog = fanSetting, "Fan Settings"
|
||||
|
|
|
|||
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI 2020.12.26.mre_f7.406688114"
|
||||
signature = "rusEFI 2020.12.30.mre_f7.3116093824"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmwave version for title bar.
|
||||
signature = "rusEFI 2020.12.26.mre_f7.406688114" ; signature is expected to be 7 or more characters.
|
||||
signature = "rusEFI 2020.12.30.mre_f7.3116093824" ; signature is expected to be 7 or more characters.
|
||||
|
||||
[Constants]
|
||||
; new packet serial format with CRC
|
||||
|
|
@ -77,7 +77,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Dec 26 21:17:39 UTC 2020
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Dec 30 13:37:15 UTC 2020
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -1336,6 +1336,7 @@ page = 1
|
|||
acIdleExtraMin = "Additional idle PID minValue while A/C is active"
|
||||
acFanPin = "Optional Radiator Fan used with A/C"
|
||||
sdCardPeriodMs = "SD card logging period, in milliseconds"
|
||||
idlePidDeactivationTpsThreshold = "Below this throttle position, the engine is considered idling."
|
||||
triggerErrorPin = "This pin is used for debugging - snap a logic analyzer on it and see if it's ever high"
|
||||
cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module"
|
||||
sensorChartMode = "rusEfi console Sensor Sniffer mode"
|
||||
|
|
@ -2796,16 +2797,16 @@ menuDialog = main
|
|||
menu = "&Idle"
|
||||
subMenu = idleSettings, "Idle settings"
|
||||
subMenu = idlehw, "Idle hardware"
|
||||
subMenu = std_separator
|
||||
subMenu = cltIdleRPMCurve, "Target RPM", 0, {idleMode == 0}
|
||||
subMenu = std_separator
|
||||
subMenu = cltIdleRPMCurve, "Target RPM"
|
||||
subMenu = cltIdleCurve, "CLT multiplier"
|
||||
subMenu = std_separator
|
||||
subMenu = idleTimingPidCorrDialog, "Closed-loop idle timing"
|
||||
subMenu = iacPidMultTbl, "IAC PID Multiplier", 0, {idleMode == 0 && useIacPidMultTable == 1}
|
||||
subMenu = iacCoastingCurve, "Coasting IAC Position for Auto-Idle", 0, {useIacTableForCoasting == 1}
|
||||
subMenu = std_separator
|
||||
subMenu = idleVeCurve, "VE", 0, {useSeparateVeForIdle == 1}
|
||||
subMenu = idleAdvanceCurve, "Ignition advance", 0, {useSeparateAdvanceForIdle == 1}
|
||||
subMenu = std_separator
|
||||
subMenu = idleTimingPidCorrDialog, "Closed-loop idle timing"
|
||||
subMenu = cltIdleCurve, "CLT multiplier"
|
||||
subMenu = iacCoastingCurve, "Coasting IAC Position for Auto-Idle", 0, {useIacTableForCoasting == 1}
|
||||
|
||||
menu = "&Advanced"
|
||||
subMenu = boostDialog, "Boost Control"
|
||||
|
|
@ -3863,11 +3864,11 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
|
|||
field = "!ECU reboot needed to apply these settings"
|
||||
field = "Use Stepper", useStepperIdle
|
||||
field = "Double Solenoid Mode", isDoubleSolenoidIdle
|
||||
field = "Use electronic throttle for idle", useETBforIdleControl, { throttlePedalPositionAdcChannel != 0 }
|
||||
field = "Electronic throttle idle range", etbIdleThrottleRange, { useETBforIdleControl == 1 }
|
||||
panel = idleHwType
|
||||
|
||||
dialog = idlePidSettings, "PID IAC Control"
|
||||
field = "#See Idle Target RPM Curve"
|
||||
field = "use Cic Pid", useCicPidForIdle
|
||||
dialog = idlePidSettings, "Closed Loop Idle"
|
||||
field = "P-factor", idleRpmPid_pFactor
|
||||
field = "I-factor", idleRpmPid_iFactor
|
||||
field = "derivativeFilterLoss", idle_derivativeFilterLoss
|
||||
|
|
@ -3880,43 +3881,48 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
|
|||
field = "Max", idleRpmPid_maxValue
|
||||
field = "iTerm Min", idlerpmpid_iTermMin
|
||||
field = "iTerm Max", idlerpmpid_iTermMax
|
||||
field = "RPM dead zone to deactivate IAC pid", idlePidRpmDeadZone
|
||||
field = "RPM upper limit to deactivate IAC pid",idlePidRpmUpperLimit
|
||||
field = "PID Extra for low RPM", pidExtraForLowRpm
|
||||
field = "Use IAC PID Multiplier Table", useIacPidMultTable
|
||||
|
||||
|
||||
dialog = idleSettings, "", yAxis
|
||||
field = "Idle IAC control mode", idleMode
|
||||
field = useInstantRpmForIdle, useInstantRpmForIdle
|
||||
field = "use ETB for idle", useETBforIdleControl, { throttlePedalPositionAdcChannel != 0 }
|
||||
field = "ETB Idle range", etbIdleThrottleRange, {useETBforIdleControl == 1}
|
||||
field = "Use separate Ignition Table for idle", useSeparateAdvanceForIdle
|
||||
field = "Use separate VE Table for idle", useSeparateVeForIdle
|
||||
field = "Use separate IAC Table For Coasting", useIacTableForCoasting, {idleMode == 0}
|
||||
field = idleIncrementalPidCic, idleIncrementalPidCic
|
||||
field = "TPS deactivation threshold", idlePidDeactivationTpsThreshold
|
||||
field = "use Cic Pid", useCicPidForIdle
|
||||
field = "Use IAC PID Multiplier Table", useIacPidMultTable
|
||||
|
||||
dialog = idleGating, "Idle Detection Thresholds"
|
||||
field = "TPS threshold", idlePidDeactivationTpsThreshold
|
||||
field = "RPM upper limit", idlePidRpmUpperLimit
|
||||
field = "RPM dead zone", idlePidRpmDeadZone
|
||||
|
||||
dialog = idleExtra, "Extra Idle Features"
|
||||
field = "Extra idle air if throttle pressed", iacByTpsTaper
|
||||
field = "Use idle ignition table", useSeparateAdvanceForIdle
|
||||
field = "Use idle VE table", useSeparateVeForIdle
|
||||
field = "Use coasting idle table", useIacTableForCoasting, {idleMode == 0}
|
||||
field = useInstantRpmForIdle, useInstantRpmForIdle
|
||||
field = "Detailed status in console", isVerboseIAC
|
||||
|
||||
dialog = idleSettings, "", yAxis
|
||||
field = "Idle control mode", idleMode
|
||||
|
||||
field = "! Solenoid idle control requires above zero RPM"
|
||||
slider = "Open loop idle position", manIdlePosition, horizontal
|
||||
field = ""
|
||||
|
||||
panel = idleGating, ""
|
||||
panel = idlePidSettings, { idleMode == 0}
|
||||
field = "Extra IAC if Throttle Pressed", iacByTpsTaper;
|
||||
field = "Detailed status in console", isVerboseIAC
|
||||
field = "#See Warmup idle multiplier"
|
||||
field = "! Solenoid Idle control requires above zero RPM"
|
||||
slider = "Manual IAC Position", manIdlePosition, horizontal
|
||||
panel = idleExtra
|
||||
|
||||
dialog = idleTimingPidCorrDialog, "", yAxis
|
||||
field = "!This timing correction mode is Alpha Version"
|
||||
field = "Use Auto-PID ignition advance control", useIdleTimingPidControl
|
||||
field = "#See Idle Target RPM Curve"
|
||||
field = "P-factor", idleTimingPid_pFactor, {useIdleTimingPidControl == 1}
|
||||
field = "I-factor", idleTimingPid_iFactor, {useIdleTimingPidControl == 1}
|
||||
field = "D-factor", idleTimingPid_dFactor, {useIdleTimingPidControl == 1}
|
||||
field = "Offset", idleTimingPid_offset, {useIdleTimingPidControl == 1}
|
||||
field = "Min Delta", idleTimingPid_minValue, {useIdleTimingPidControl == 1}
|
||||
field = "Max Delta", idleTimingPid_maxValue, {useIdleTimingPidControl == 1}
|
||||
field = "#See RPM dead zone to deactivate IAC pid"
|
||||
field = "RPM working zone for timing pid", idleTimingPidWorkZone, {useIdleTimingPidControl == 1}
|
||||
field = "RPM working zone falloff", idlePidFalloffDeltaRpm, {useIdleTimingPidControl == 1}
|
||||
field = "RPM dead zone to deactivate timing pid", idleTimingPidDeadZone, {useIdleTimingPidControl == 1}
|
||||
field = ""
|
||||
field = "Enable closed loop idle ignition timing", useIdleTimingPidControl
|
||||
field = ""
|
||||
field = "#Gain is in degrees advance per rpm away from target"
|
||||
field = "#A good starting point is 0.1 = 10 deg per 100 rpm"
|
||||
field = "Proportional gain", idleTimingPid_pFactor, {useIdleTimingPidControl == 1}
|
||||
field = "Derivative gain", idleTimingPid_dFactor, {useIdleTimingPidControl == 1}
|
||||
field = ""
|
||||
field = "Min adjustment (retard)", idleTimingPid_minValue, {useIdleTimingPidControl == 1}
|
||||
field = "Max adjustment (advance)", idleTimingPid_maxValue, {useIdleTimingPidControl == 1}
|
||||
field = ""
|
||||
field = "#Use debug mode 'Timing' to view idle timing adjustment"
|
||||
|
||||
; Engine->Fan Settings
|
||||
dialog = fanSetting, "Fan Settings"
|
||||
|
|
|
|||
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI 2020.12.26.prometheus_405.1295337818"
|
||||
signature = "rusEFI 2020.12.30.prometheus_405.3971156392"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmwave version for title bar.
|
||||
signature = "rusEFI 2020.12.26.prometheus_405.1295337818" ; signature is expected to be 7 or more characters.
|
||||
signature = "rusEFI 2020.12.30.prometheus_405.3971156392" ; signature is expected to be 7 or more characters.
|
||||
|
||||
[Constants]
|
||||
; new packet serial format with CRC
|
||||
|
|
@ -77,7 +77,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Dec 26 21:17:46 UTC 2020
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Dec 30 13:37:23 UTC 2020
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -1336,6 +1336,7 @@ page = 1
|
|||
acIdleExtraMin = "Additional idle PID minValue while A/C is active"
|
||||
acFanPin = "Optional Radiator Fan used with A/C"
|
||||
sdCardPeriodMs = "SD card logging period, in milliseconds"
|
||||
idlePidDeactivationTpsThreshold = "Below this throttle position, the engine is considered idling."
|
||||
triggerErrorPin = "This pin is used for debugging - snap a logic analyzer on it and see if it's ever high"
|
||||
cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module"
|
||||
sensorChartMode = "rusEfi console Sensor Sniffer mode"
|
||||
|
|
@ -2796,16 +2797,16 @@ menuDialog = main
|
|||
menu = "&Idle"
|
||||
subMenu = idleSettings, "Idle settings"
|
||||
subMenu = idlehw, "Idle hardware"
|
||||
subMenu = std_separator
|
||||
subMenu = cltIdleRPMCurve, "Target RPM", 0, {idleMode == 0}
|
||||
subMenu = std_separator
|
||||
subMenu = cltIdleRPMCurve, "Target RPM"
|
||||
subMenu = cltIdleCurve, "CLT multiplier"
|
||||
subMenu = std_separator
|
||||
subMenu = idleTimingPidCorrDialog, "Closed-loop idle timing"
|
||||
subMenu = iacPidMultTbl, "IAC PID Multiplier", 0, {idleMode == 0 && useIacPidMultTable == 1}
|
||||
subMenu = iacCoastingCurve, "Coasting IAC Position for Auto-Idle", 0, {useIacTableForCoasting == 1}
|
||||
subMenu = std_separator
|
||||
subMenu = idleVeCurve, "VE", 0, {useSeparateVeForIdle == 1}
|
||||
subMenu = idleAdvanceCurve, "Ignition advance", 0, {useSeparateAdvanceForIdle == 1}
|
||||
subMenu = std_separator
|
||||
subMenu = idleTimingPidCorrDialog, "Closed-loop idle timing"
|
||||
subMenu = cltIdleCurve, "CLT multiplier"
|
||||
subMenu = iacCoastingCurve, "Coasting IAC Position for Auto-Idle", 0, {useIacTableForCoasting == 1}
|
||||
|
||||
menu = "&Advanced"
|
||||
subMenu = boostDialog, "Boost Control"
|
||||
|
|
@ -3875,11 +3876,11 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
|
|||
field = "!ECU reboot needed to apply these settings"
|
||||
field = "Use Stepper", useStepperIdle
|
||||
field = "Double Solenoid Mode", isDoubleSolenoidIdle
|
||||
field = "Use electronic throttle for idle", useETBforIdleControl, { throttlePedalPositionAdcChannel != 0 }
|
||||
field = "Electronic throttle idle range", etbIdleThrottleRange, { useETBforIdleControl == 1 }
|
||||
panel = idleHwType
|
||||
|
||||
dialog = idlePidSettings, "PID IAC Control"
|
||||
field = "#See Idle Target RPM Curve"
|
||||
field = "use Cic Pid", useCicPidForIdle
|
||||
dialog = idlePidSettings, "Closed Loop Idle"
|
||||
field = "P-factor", idleRpmPid_pFactor
|
||||
field = "I-factor", idleRpmPid_iFactor
|
||||
field = "derivativeFilterLoss", idle_derivativeFilterLoss
|
||||
|
|
@ -3892,43 +3893,48 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
|
|||
field = "Max", idleRpmPid_maxValue
|
||||
field = "iTerm Min", idlerpmpid_iTermMin
|
||||
field = "iTerm Max", idlerpmpid_iTermMax
|
||||
field = "RPM dead zone to deactivate IAC pid", idlePidRpmDeadZone
|
||||
field = "RPM upper limit to deactivate IAC pid",idlePidRpmUpperLimit
|
||||
field = "PID Extra for low RPM", pidExtraForLowRpm
|
||||
field = "Use IAC PID Multiplier Table", useIacPidMultTable
|
||||
|
||||
|
||||
dialog = idleSettings, "", yAxis
|
||||
field = "Idle IAC control mode", idleMode
|
||||
field = useInstantRpmForIdle, useInstantRpmForIdle
|
||||
field = "use ETB for idle", useETBforIdleControl, { throttlePedalPositionAdcChannel != 0 }
|
||||
field = "ETB Idle range", etbIdleThrottleRange, {useETBforIdleControl == 1}
|
||||
field = "Use separate Ignition Table for idle", useSeparateAdvanceForIdle
|
||||
field = "Use separate VE Table for idle", useSeparateVeForIdle
|
||||
field = "Use separate IAC Table For Coasting", useIacTableForCoasting, {idleMode == 0}
|
||||
field = idleIncrementalPidCic, idleIncrementalPidCic
|
||||
field = "TPS deactivation threshold", idlePidDeactivationTpsThreshold
|
||||
field = "use Cic Pid", useCicPidForIdle
|
||||
field = "Use IAC PID Multiplier Table", useIacPidMultTable
|
||||
|
||||
dialog = idleGating, "Idle Detection Thresholds"
|
||||
field = "TPS threshold", idlePidDeactivationTpsThreshold
|
||||
field = "RPM upper limit", idlePidRpmUpperLimit
|
||||
field = "RPM dead zone", idlePidRpmDeadZone
|
||||
|
||||
dialog = idleExtra, "Extra Idle Features"
|
||||
field = "Extra idle air if throttle pressed", iacByTpsTaper
|
||||
field = "Use idle ignition table", useSeparateAdvanceForIdle
|
||||
field = "Use idle VE table", useSeparateVeForIdle
|
||||
field = "Use coasting idle table", useIacTableForCoasting, {idleMode == 0}
|
||||
field = useInstantRpmForIdle, useInstantRpmForIdle
|
||||
field = "Detailed status in console", isVerboseIAC
|
||||
|
||||
dialog = idleSettings, "", yAxis
|
||||
field = "Idle control mode", idleMode
|
||||
|
||||
field = "! Solenoid idle control requires above zero RPM"
|
||||
slider = "Open loop idle position", manIdlePosition, horizontal
|
||||
field = ""
|
||||
|
||||
panel = idleGating, ""
|
||||
panel = idlePidSettings, { idleMode == 0}
|
||||
field = "Extra IAC if Throttle Pressed", iacByTpsTaper;
|
||||
field = "Detailed status in console", isVerboseIAC
|
||||
field = "#See Warmup idle multiplier"
|
||||
field = "! Solenoid Idle control requires above zero RPM"
|
||||
slider = "Manual IAC Position", manIdlePosition, horizontal
|
||||
panel = idleExtra
|
||||
|
||||
dialog = idleTimingPidCorrDialog, "", yAxis
|
||||
field = "!This timing correction mode is Alpha Version"
|
||||
field = "Use Auto-PID ignition advance control", useIdleTimingPidControl
|
||||
field = "#See Idle Target RPM Curve"
|
||||
field = "P-factor", idleTimingPid_pFactor, {useIdleTimingPidControl == 1}
|
||||
field = "I-factor", idleTimingPid_iFactor, {useIdleTimingPidControl == 1}
|
||||
field = "D-factor", idleTimingPid_dFactor, {useIdleTimingPidControl == 1}
|
||||
field = "Offset", idleTimingPid_offset, {useIdleTimingPidControl == 1}
|
||||
field = "Min Delta", idleTimingPid_minValue, {useIdleTimingPidControl == 1}
|
||||
field = "Max Delta", idleTimingPid_maxValue, {useIdleTimingPidControl == 1}
|
||||
field = "#See RPM dead zone to deactivate IAC pid"
|
||||
field = "RPM working zone for timing pid", idleTimingPidWorkZone, {useIdleTimingPidControl == 1}
|
||||
field = "RPM working zone falloff", idlePidFalloffDeltaRpm, {useIdleTimingPidControl == 1}
|
||||
field = "RPM dead zone to deactivate timing pid", idleTimingPidDeadZone, {useIdleTimingPidControl == 1}
|
||||
field = ""
|
||||
field = "Enable closed loop idle ignition timing", useIdleTimingPidControl
|
||||
field = ""
|
||||
field = "#Gain is in degrees advance per rpm away from target"
|
||||
field = "#A good starting point is 0.1 = 10 deg per 100 rpm"
|
||||
field = "Proportional gain", idleTimingPid_pFactor, {useIdleTimingPidControl == 1}
|
||||
field = "Derivative gain", idleTimingPid_dFactor, {useIdleTimingPidControl == 1}
|
||||
field = ""
|
||||
field = "Min adjustment (retard)", idleTimingPid_minValue, {useIdleTimingPidControl == 1}
|
||||
field = "Max adjustment (advance)", idleTimingPid_maxValue, {useIdleTimingPidControl == 1}
|
||||
field = ""
|
||||
field = "#Use debug mode 'Timing' to view idle timing adjustment"
|
||||
|
||||
; Engine->Fan Settings
|
||||
dialog = fanSetting, "Fan Settings"
|
||||
|
|
|
|||
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI 2020.12.26.prometheus_469.1295337818"
|
||||
signature = "rusEFI 2020.12.30.prometheus_469.3971156392"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmwave version for title bar.
|
||||
signature = "rusEFI 2020.12.26.prometheus_469.1295337818" ; signature is expected to be 7 or more characters.
|
||||
signature = "rusEFI 2020.12.30.prometheus_469.3971156392" ; signature is expected to be 7 or more characters.
|
||||
|
||||
[Constants]
|
||||
; new packet serial format with CRC
|
||||
|
|
@ -77,7 +77,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Dec 26 21:17:44 UTC 2020
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Dec 30 13:37:21 UTC 2020
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -1336,6 +1336,7 @@ page = 1
|
|||
acIdleExtraMin = "Additional idle PID minValue while A/C is active"
|
||||
acFanPin = "Optional Radiator Fan used with A/C"
|
||||
sdCardPeriodMs = "SD card logging period, in milliseconds"
|
||||
idlePidDeactivationTpsThreshold = "Below this throttle position, the engine is considered idling."
|
||||
triggerErrorPin = "This pin is used for debugging - snap a logic analyzer on it and see if it's ever high"
|
||||
cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module"
|
||||
sensorChartMode = "rusEfi console Sensor Sniffer mode"
|
||||
|
|
@ -2796,16 +2797,16 @@ menuDialog = main
|
|||
menu = "&Idle"
|
||||
subMenu = idleSettings, "Idle settings"
|
||||
subMenu = idlehw, "Idle hardware"
|
||||
subMenu = std_separator
|
||||
subMenu = cltIdleRPMCurve, "Target RPM", 0, {idleMode == 0}
|
||||
subMenu = std_separator
|
||||
subMenu = cltIdleRPMCurve, "Target RPM"
|
||||
subMenu = cltIdleCurve, "CLT multiplier"
|
||||
subMenu = std_separator
|
||||
subMenu = idleTimingPidCorrDialog, "Closed-loop idle timing"
|
||||
subMenu = iacPidMultTbl, "IAC PID Multiplier", 0, {idleMode == 0 && useIacPidMultTable == 1}
|
||||
subMenu = iacCoastingCurve, "Coasting IAC Position for Auto-Idle", 0, {useIacTableForCoasting == 1}
|
||||
subMenu = std_separator
|
||||
subMenu = idleVeCurve, "VE", 0, {useSeparateVeForIdle == 1}
|
||||
subMenu = idleAdvanceCurve, "Ignition advance", 0, {useSeparateAdvanceForIdle == 1}
|
||||
subMenu = std_separator
|
||||
subMenu = idleTimingPidCorrDialog, "Closed-loop idle timing"
|
||||
subMenu = cltIdleCurve, "CLT multiplier"
|
||||
subMenu = iacCoastingCurve, "Coasting IAC Position for Auto-Idle", 0, {useIacTableForCoasting == 1}
|
||||
|
||||
menu = "&Advanced"
|
||||
subMenu = boostDialog, "Boost Control"
|
||||
|
|
@ -3875,11 +3876,11 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
|
|||
field = "!ECU reboot needed to apply these settings"
|
||||
field = "Use Stepper", useStepperIdle
|
||||
field = "Double Solenoid Mode", isDoubleSolenoidIdle
|
||||
field = "Use electronic throttle for idle", useETBforIdleControl, { throttlePedalPositionAdcChannel != 0 }
|
||||
field = "Electronic throttle idle range", etbIdleThrottleRange, { useETBforIdleControl == 1 }
|
||||
panel = idleHwType
|
||||
|
||||
dialog = idlePidSettings, "PID IAC Control"
|
||||
field = "#See Idle Target RPM Curve"
|
||||
field = "use Cic Pid", useCicPidForIdle
|
||||
dialog = idlePidSettings, "Closed Loop Idle"
|
||||
field = "P-factor", idleRpmPid_pFactor
|
||||
field = "I-factor", idleRpmPid_iFactor
|
||||
field = "derivativeFilterLoss", idle_derivativeFilterLoss
|
||||
|
|
@ -3892,43 +3893,48 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
|
|||
field = "Max", idleRpmPid_maxValue
|
||||
field = "iTerm Min", idlerpmpid_iTermMin
|
||||
field = "iTerm Max", idlerpmpid_iTermMax
|
||||
field = "RPM dead zone to deactivate IAC pid", idlePidRpmDeadZone
|
||||
field = "RPM upper limit to deactivate IAC pid",idlePidRpmUpperLimit
|
||||
field = "PID Extra for low RPM", pidExtraForLowRpm
|
||||
field = "Use IAC PID Multiplier Table", useIacPidMultTable
|
||||
|
||||
|
||||
dialog = idleSettings, "", yAxis
|
||||
field = "Idle IAC control mode", idleMode
|
||||
field = useInstantRpmForIdle, useInstantRpmForIdle
|
||||
field = "use ETB for idle", useETBforIdleControl, { throttlePedalPositionAdcChannel != 0 }
|
||||
field = "ETB Idle range", etbIdleThrottleRange, {useETBforIdleControl == 1}
|
||||
field = "Use separate Ignition Table for idle", useSeparateAdvanceForIdle
|
||||
field = "Use separate VE Table for idle", useSeparateVeForIdle
|
||||
field = "Use separate IAC Table For Coasting", useIacTableForCoasting, {idleMode == 0}
|
||||
field = idleIncrementalPidCic, idleIncrementalPidCic
|
||||
field = "TPS deactivation threshold", idlePidDeactivationTpsThreshold
|
||||
field = "use Cic Pid", useCicPidForIdle
|
||||
field = "Use IAC PID Multiplier Table", useIacPidMultTable
|
||||
|
||||
dialog = idleGating, "Idle Detection Thresholds"
|
||||
field = "TPS threshold", idlePidDeactivationTpsThreshold
|
||||
field = "RPM upper limit", idlePidRpmUpperLimit
|
||||
field = "RPM dead zone", idlePidRpmDeadZone
|
||||
|
||||
dialog = idleExtra, "Extra Idle Features"
|
||||
field = "Extra idle air if throttle pressed", iacByTpsTaper
|
||||
field = "Use idle ignition table", useSeparateAdvanceForIdle
|
||||
field = "Use idle VE table", useSeparateVeForIdle
|
||||
field = "Use coasting idle table", useIacTableForCoasting, {idleMode == 0}
|
||||
field = useInstantRpmForIdle, useInstantRpmForIdle
|
||||
field = "Detailed status in console", isVerboseIAC
|
||||
|
||||
dialog = idleSettings, "", yAxis
|
||||
field = "Idle control mode", idleMode
|
||||
|
||||
field = "! Solenoid idle control requires above zero RPM"
|
||||
slider = "Open loop idle position", manIdlePosition, horizontal
|
||||
field = ""
|
||||
|
||||
panel = idleGating, ""
|
||||
panel = idlePidSettings, { idleMode == 0}
|
||||
field = "Extra IAC if Throttle Pressed", iacByTpsTaper;
|
||||
field = "Detailed status in console", isVerboseIAC
|
||||
field = "#See Warmup idle multiplier"
|
||||
field = "! Solenoid Idle control requires above zero RPM"
|
||||
slider = "Manual IAC Position", manIdlePosition, horizontal
|
||||
panel = idleExtra
|
||||
|
||||
dialog = idleTimingPidCorrDialog, "", yAxis
|
||||
field = "!This timing correction mode is Alpha Version"
|
||||
field = "Use Auto-PID ignition advance control", useIdleTimingPidControl
|
||||
field = "#See Idle Target RPM Curve"
|
||||
field = "P-factor", idleTimingPid_pFactor, {useIdleTimingPidControl == 1}
|
||||
field = "I-factor", idleTimingPid_iFactor, {useIdleTimingPidControl == 1}
|
||||
field = "D-factor", idleTimingPid_dFactor, {useIdleTimingPidControl == 1}
|
||||
field = "Offset", idleTimingPid_offset, {useIdleTimingPidControl == 1}
|
||||
field = "Min Delta", idleTimingPid_minValue, {useIdleTimingPidControl == 1}
|
||||
field = "Max Delta", idleTimingPid_maxValue, {useIdleTimingPidControl == 1}
|
||||
field = "#See RPM dead zone to deactivate IAC pid"
|
||||
field = "RPM working zone for timing pid", idleTimingPidWorkZone, {useIdleTimingPidControl == 1}
|
||||
field = "RPM working zone falloff", idlePidFalloffDeltaRpm, {useIdleTimingPidControl == 1}
|
||||
field = "RPM dead zone to deactivate timing pid", idleTimingPidDeadZone, {useIdleTimingPidControl == 1}
|
||||
field = ""
|
||||
field = "Enable closed loop idle ignition timing", useIdleTimingPidControl
|
||||
field = ""
|
||||
field = "#Gain is in degrees advance per rpm away from target"
|
||||
field = "#A good starting point is 0.1 = 10 deg per 100 rpm"
|
||||
field = "Proportional gain", idleTimingPid_pFactor, {useIdleTimingPidControl == 1}
|
||||
field = "Derivative gain", idleTimingPid_dFactor, {useIdleTimingPidControl == 1}
|
||||
field = ""
|
||||
field = "Min adjustment (retard)", idleTimingPid_minValue, {useIdleTimingPidControl == 1}
|
||||
field = "Max adjustment (advance)", idleTimingPid_maxValue, {useIdleTimingPidControl == 1}
|
||||
field = ""
|
||||
field = "#Use debug mode 'Timing' to view idle timing adjustment"
|
||||
|
||||
; Engine->Fan Settings
|
||||
dialog = fanSetting, "Fan Settings"
|
||||
|
|
|
|||
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI 2020.12.26.proteus_f4.3326543317"
|
||||
signature = "rusEFI 2020.12.30.proteus_f4.1740719399"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmwave version for title bar.
|
||||
signature = "rusEFI 2020.12.26.proteus_f4.3326543317" ; signature is expected to be 7 or more characters.
|
||||
signature = "rusEFI 2020.12.30.proteus_f4.1740719399" ; signature is expected to be 7 or more characters.
|
||||
|
||||
[Constants]
|
||||
; new packet serial format with CRC
|
||||
|
|
@ -77,7 +77,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Dec 26 21:17:49 UTC 2020
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Dec 30 13:37:27 UTC 2020
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -1336,6 +1336,7 @@ page = 1
|
|||
acIdleExtraMin = "Additional idle PID minValue while A/C is active"
|
||||
acFanPin = "Optional Radiator Fan used with A/C"
|
||||
sdCardPeriodMs = "SD card logging period, in milliseconds"
|
||||
idlePidDeactivationTpsThreshold = "Below this throttle position, the engine is considered idling."
|
||||
triggerErrorPin = "This pin is used for debugging - snap a logic analyzer on it and see if it's ever high"
|
||||
cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module"
|
||||
sensorChartMode = "rusEfi console Sensor Sniffer mode"
|
||||
|
|
@ -2796,16 +2797,16 @@ menuDialog = main
|
|||
menu = "&Idle"
|
||||
subMenu = idleSettings, "Idle settings"
|
||||
subMenu = idlehw, "Idle hardware"
|
||||
subMenu = std_separator
|
||||
subMenu = cltIdleRPMCurve, "Target RPM", 0, {idleMode == 0}
|
||||
subMenu = std_separator
|
||||
subMenu = cltIdleRPMCurve, "Target RPM"
|
||||
subMenu = cltIdleCurve, "CLT multiplier"
|
||||
subMenu = std_separator
|
||||
subMenu = idleTimingPidCorrDialog, "Closed-loop idle timing"
|
||||
subMenu = iacPidMultTbl, "IAC PID Multiplier", 0, {idleMode == 0 && useIacPidMultTable == 1}
|
||||
subMenu = iacCoastingCurve, "Coasting IAC Position for Auto-Idle", 0, {useIacTableForCoasting == 1}
|
||||
subMenu = std_separator
|
||||
subMenu = idleVeCurve, "VE", 0, {useSeparateVeForIdle == 1}
|
||||
subMenu = idleAdvanceCurve, "Ignition advance", 0, {useSeparateAdvanceForIdle == 1}
|
||||
subMenu = std_separator
|
||||
subMenu = idleTimingPidCorrDialog, "Closed-loop idle timing"
|
||||
subMenu = cltIdleCurve, "CLT multiplier"
|
||||
subMenu = iacCoastingCurve, "Coasting IAC Position for Auto-Idle", 0, {useIacTableForCoasting == 1}
|
||||
|
||||
menu = "&Advanced"
|
||||
subMenu = boostDialog, "Boost Control"
|
||||
|
|
@ -3856,11 +3857,11 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
|
|||
field = "!ECU reboot needed to apply these settings"
|
||||
field = "Use Stepper", useStepperIdle
|
||||
field = "Double Solenoid Mode", isDoubleSolenoidIdle
|
||||
field = "Use electronic throttle for idle", useETBforIdleControl, { throttlePedalPositionAdcChannel != 0 }
|
||||
field = "Electronic throttle idle range", etbIdleThrottleRange, { useETBforIdleControl == 1 }
|
||||
panel = idleHwType
|
||||
|
||||
dialog = idlePidSettings, "PID IAC Control"
|
||||
field = "#See Idle Target RPM Curve"
|
||||
field = "use Cic Pid", useCicPidForIdle
|
||||
dialog = idlePidSettings, "Closed Loop Idle"
|
||||
field = "P-factor", idleRpmPid_pFactor
|
||||
field = "I-factor", idleRpmPid_iFactor
|
||||
field = "derivativeFilterLoss", idle_derivativeFilterLoss
|
||||
|
|
@ -3873,43 +3874,48 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
|
|||
field = "Max", idleRpmPid_maxValue
|
||||
field = "iTerm Min", idlerpmpid_iTermMin
|
||||
field = "iTerm Max", idlerpmpid_iTermMax
|
||||
field = "RPM dead zone to deactivate IAC pid", idlePidRpmDeadZone
|
||||
field = "RPM upper limit to deactivate IAC pid",idlePidRpmUpperLimit
|
||||
field = "PID Extra for low RPM", pidExtraForLowRpm
|
||||
field = "Use IAC PID Multiplier Table", useIacPidMultTable
|
||||
|
||||
|
||||
dialog = idleSettings, "", yAxis
|
||||
field = "Idle IAC control mode", idleMode
|
||||
field = useInstantRpmForIdle, useInstantRpmForIdle
|
||||
field = "use ETB for idle", useETBforIdleControl, { throttlePedalPositionAdcChannel != 0 }
|
||||
field = "ETB Idle range", etbIdleThrottleRange, {useETBforIdleControl == 1}
|
||||
field = "Use separate Ignition Table for idle", useSeparateAdvanceForIdle
|
||||
field = "Use separate VE Table for idle", useSeparateVeForIdle
|
||||
field = "Use separate IAC Table For Coasting", useIacTableForCoasting, {idleMode == 0}
|
||||
field = idleIncrementalPidCic, idleIncrementalPidCic
|
||||
field = "TPS deactivation threshold", idlePidDeactivationTpsThreshold
|
||||
field = "use Cic Pid", useCicPidForIdle
|
||||
field = "Use IAC PID Multiplier Table", useIacPidMultTable
|
||||
|
||||
dialog = idleGating, "Idle Detection Thresholds"
|
||||
field = "TPS threshold", idlePidDeactivationTpsThreshold
|
||||
field = "RPM upper limit", idlePidRpmUpperLimit
|
||||
field = "RPM dead zone", idlePidRpmDeadZone
|
||||
|
||||
dialog = idleExtra, "Extra Idle Features"
|
||||
field = "Extra idle air if throttle pressed", iacByTpsTaper
|
||||
field = "Use idle ignition table", useSeparateAdvanceForIdle
|
||||
field = "Use idle VE table", useSeparateVeForIdle
|
||||
field = "Use coasting idle table", useIacTableForCoasting, {idleMode == 0}
|
||||
field = useInstantRpmForIdle, useInstantRpmForIdle
|
||||
field = "Detailed status in console", isVerboseIAC
|
||||
|
||||
dialog = idleSettings, "", yAxis
|
||||
field = "Idle control mode", idleMode
|
||||
|
||||
field = "! Solenoid idle control requires above zero RPM"
|
||||
slider = "Open loop idle position", manIdlePosition, horizontal
|
||||
field = ""
|
||||
|
||||
panel = idleGating, ""
|
||||
panel = idlePidSettings, { idleMode == 0}
|
||||
field = "Extra IAC if Throttle Pressed", iacByTpsTaper;
|
||||
field = "Detailed status in console", isVerboseIAC
|
||||
field = "#See Warmup idle multiplier"
|
||||
field = "! Solenoid Idle control requires above zero RPM"
|
||||
slider = "Manual IAC Position", manIdlePosition, horizontal
|
||||
panel = idleExtra
|
||||
|
||||
dialog = idleTimingPidCorrDialog, "", yAxis
|
||||
field = "!This timing correction mode is Alpha Version"
|
||||
field = "Use Auto-PID ignition advance control", useIdleTimingPidControl
|
||||
field = "#See Idle Target RPM Curve"
|
||||
field = "P-factor", idleTimingPid_pFactor, {useIdleTimingPidControl == 1}
|
||||
field = "I-factor", idleTimingPid_iFactor, {useIdleTimingPidControl == 1}
|
||||
field = "D-factor", idleTimingPid_dFactor, {useIdleTimingPidControl == 1}
|
||||
field = "Offset", idleTimingPid_offset, {useIdleTimingPidControl == 1}
|
||||
field = "Min Delta", idleTimingPid_minValue, {useIdleTimingPidControl == 1}
|
||||
field = "Max Delta", idleTimingPid_maxValue, {useIdleTimingPidControl == 1}
|
||||
field = "#See RPM dead zone to deactivate IAC pid"
|
||||
field = "RPM working zone for timing pid", idleTimingPidWorkZone, {useIdleTimingPidControl == 1}
|
||||
field = "RPM working zone falloff", idlePidFalloffDeltaRpm, {useIdleTimingPidControl == 1}
|
||||
field = "RPM dead zone to deactivate timing pid", idleTimingPidDeadZone, {useIdleTimingPidControl == 1}
|
||||
field = ""
|
||||
field = "Enable closed loop idle ignition timing", useIdleTimingPidControl
|
||||
field = ""
|
||||
field = "#Gain is in degrees advance per rpm away from target"
|
||||
field = "#A good starting point is 0.1 = 10 deg per 100 rpm"
|
||||
field = "Proportional gain", idleTimingPid_pFactor, {useIdleTimingPidControl == 1}
|
||||
field = "Derivative gain", idleTimingPid_dFactor, {useIdleTimingPidControl == 1}
|
||||
field = ""
|
||||
field = "Min adjustment (retard)", idleTimingPid_minValue, {useIdleTimingPidControl == 1}
|
||||
field = "Max adjustment (advance)", idleTimingPid_maxValue, {useIdleTimingPidControl == 1}
|
||||
field = ""
|
||||
field = "#Use debug mode 'Timing' to view idle timing adjustment"
|
||||
|
||||
; Engine->Fan Settings
|
||||
dialog = fanSetting, "Fan Settings"
|
||||
|
|
|
|||
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI 2020.12.26.proteus_f7.3326543317"
|
||||
signature = "rusEFI 2020.12.30.proteus_f7.1740719399"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmwave version for title bar.
|
||||
signature = "rusEFI 2020.12.26.proteus_f7.3326543317" ; signature is expected to be 7 or more characters.
|
||||
signature = "rusEFI 2020.12.30.proteus_f7.1740719399" ; signature is expected to be 7 or more characters.
|
||||
|
||||
[Constants]
|
||||
; new packet serial format with CRC
|
||||
|
|
@ -77,7 +77,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Dec 26 21:17:48 UTC 2020
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Dec 30 13:37:25 UTC 2020
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -1336,6 +1336,7 @@ page = 1
|
|||
acIdleExtraMin = "Additional idle PID minValue while A/C is active"
|
||||
acFanPin = "Optional Radiator Fan used with A/C"
|
||||
sdCardPeriodMs = "SD card logging period, in milliseconds"
|
||||
idlePidDeactivationTpsThreshold = "Below this throttle position, the engine is considered idling."
|
||||
triggerErrorPin = "This pin is used for debugging - snap a logic analyzer on it and see if it's ever high"
|
||||
cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module"
|
||||
sensorChartMode = "rusEfi console Sensor Sniffer mode"
|
||||
|
|
@ -2796,16 +2797,16 @@ menuDialog = main
|
|||
menu = "&Idle"
|
||||
subMenu = idleSettings, "Idle settings"
|
||||
subMenu = idlehw, "Idle hardware"
|
||||
subMenu = std_separator
|
||||
subMenu = cltIdleRPMCurve, "Target RPM", 0, {idleMode == 0}
|
||||
subMenu = std_separator
|
||||
subMenu = cltIdleRPMCurve, "Target RPM"
|
||||
subMenu = cltIdleCurve, "CLT multiplier"
|
||||
subMenu = std_separator
|
||||
subMenu = idleTimingPidCorrDialog, "Closed-loop idle timing"
|
||||
subMenu = iacPidMultTbl, "IAC PID Multiplier", 0, {idleMode == 0 && useIacPidMultTable == 1}
|
||||
subMenu = iacCoastingCurve, "Coasting IAC Position for Auto-Idle", 0, {useIacTableForCoasting == 1}
|
||||
subMenu = std_separator
|
||||
subMenu = idleVeCurve, "VE", 0, {useSeparateVeForIdle == 1}
|
||||
subMenu = idleAdvanceCurve, "Ignition advance", 0, {useSeparateAdvanceForIdle == 1}
|
||||
subMenu = std_separator
|
||||
subMenu = idleTimingPidCorrDialog, "Closed-loop idle timing"
|
||||
subMenu = cltIdleCurve, "CLT multiplier"
|
||||
subMenu = iacCoastingCurve, "Coasting IAC Position for Auto-Idle", 0, {useIacTableForCoasting == 1}
|
||||
|
||||
menu = "&Advanced"
|
||||
subMenu = boostDialog, "Boost Control"
|
||||
|
|
@ -3856,11 +3857,11 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
|
|||
field = "!ECU reboot needed to apply these settings"
|
||||
field = "Use Stepper", useStepperIdle
|
||||
field = "Double Solenoid Mode", isDoubleSolenoidIdle
|
||||
field = "Use electronic throttle for idle", useETBforIdleControl, { throttlePedalPositionAdcChannel != 0 }
|
||||
field = "Electronic throttle idle range", etbIdleThrottleRange, { useETBforIdleControl == 1 }
|
||||
panel = idleHwType
|
||||
|
||||
dialog = idlePidSettings, "PID IAC Control"
|
||||
field = "#See Idle Target RPM Curve"
|
||||
field = "use Cic Pid", useCicPidForIdle
|
||||
dialog = idlePidSettings, "Closed Loop Idle"
|
||||
field = "P-factor", idleRpmPid_pFactor
|
||||
field = "I-factor", idleRpmPid_iFactor
|
||||
field = "derivativeFilterLoss", idle_derivativeFilterLoss
|
||||
|
|
@ -3873,43 +3874,48 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
|
|||
field = "Max", idleRpmPid_maxValue
|
||||
field = "iTerm Min", idlerpmpid_iTermMin
|
||||
field = "iTerm Max", idlerpmpid_iTermMax
|
||||
field = "RPM dead zone to deactivate IAC pid", idlePidRpmDeadZone
|
||||
field = "RPM upper limit to deactivate IAC pid",idlePidRpmUpperLimit
|
||||
field = "PID Extra for low RPM", pidExtraForLowRpm
|
||||
field = "Use IAC PID Multiplier Table", useIacPidMultTable
|
||||
|
||||
|
||||
dialog = idleSettings, "", yAxis
|
||||
field = "Idle IAC control mode", idleMode
|
||||
field = useInstantRpmForIdle, useInstantRpmForIdle
|
||||
field = "use ETB for idle", useETBforIdleControl, { throttlePedalPositionAdcChannel != 0 }
|
||||
field = "ETB Idle range", etbIdleThrottleRange, {useETBforIdleControl == 1}
|
||||
field = "Use separate Ignition Table for idle", useSeparateAdvanceForIdle
|
||||
field = "Use separate VE Table for idle", useSeparateVeForIdle
|
||||
field = "Use separate IAC Table For Coasting", useIacTableForCoasting, {idleMode == 0}
|
||||
field = idleIncrementalPidCic, idleIncrementalPidCic
|
||||
field = "TPS deactivation threshold", idlePidDeactivationTpsThreshold
|
||||
field = "use Cic Pid", useCicPidForIdle
|
||||
field = "Use IAC PID Multiplier Table", useIacPidMultTable
|
||||
|
||||
dialog = idleGating, "Idle Detection Thresholds"
|
||||
field = "TPS threshold", idlePidDeactivationTpsThreshold
|
||||
field = "RPM upper limit", idlePidRpmUpperLimit
|
||||
field = "RPM dead zone", idlePidRpmDeadZone
|
||||
|
||||
dialog = idleExtra, "Extra Idle Features"
|
||||
field = "Extra idle air if throttle pressed", iacByTpsTaper
|
||||
field = "Use idle ignition table", useSeparateAdvanceForIdle
|
||||
field = "Use idle VE table", useSeparateVeForIdle
|
||||
field = "Use coasting idle table", useIacTableForCoasting, {idleMode == 0}
|
||||
field = useInstantRpmForIdle, useInstantRpmForIdle
|
||||
field = "Detailed status in console", isVerboseIAC
|
||||
|
||||
dialog = idleSettings, "", yAxis
|
||||
field = "Idle control mode", idleMode
|
||||
|
||||
field = "! Solenoid idle control requires above zero RPM"
|
||||
slider = "Open loop idle position", manIdlePosition, horizontal
|
||||
field = ""
|
||||
|
||||
panel = idleGating, ""
|
||||
panel = idlePidSettings, { idleMode == 0}
|
||||
field = "Extra IAC if Throttle Pressed", iacByTpsTaper;
|
||||
field = "Detailed status in console", isVerboseIAC
|
||||
field = "#See Warmup idle multiplier"
|
||||
field = "! Solenoid Idle control requires above zero RPM"
|
||||
slider = "Manual IAC Position", manIdlePosition, horizontal
|
||||
panel = idleExtra
|
||||
|
||||
dialog = idleTimingPidCorrDialog, "", yAxis
|
||||
field = "!This timing correction mode is Alpha Version"
|
||||
field = "Use Auto-PID ignition advance control", useIdleTimingPidControl
|
||||
field = "#See Idle Target RPM Curve"
|
||||
field = "P-factor", idleTimingPid_pFactor, {useIdleTimingPidControl == 1}
|
||||
field = "I-factor", idleTimingPid_iFactor, {useIdleTimingPidControl == 1}
|
||||
field = "D-factor", idleTimingPid_dFactor, {useIdleTimingPidControl == 1}
|
||||
field = "Offset", idleTimingPid_offset, {useIdleTimingPidControl == 1}
|
||||
field = "Min Delta", idleTimingPid_minValue, {useIdleTimingPidControl == 1}
|
||||
field = "Max Delta", idleTimingPid_maxValue, {useIdleTimingPidControl == 1}
|
||||
field = "#See RPM dead zone to deactivate IAC pid"
|
||||
field = "RPM working zone for timing pid", idleTimingPidWorkZone, {useIdleTimingPidControl == 1}
|
||||
field = "RPM working zone falloff", idlePidFalloffDeltaRpm, {useIdleTimingPidControl == 1}
|
||||
field = "RPM dead zone to deactivate timing pid", idleTimingPidDeadZone, {useIdleTimingPidControl == 1}
|
||||
field = ""
|
||||
field = "Enable closed loop idle ignition timing", useIdleTimingPidControl
|
||||
field = ""
|
||||
field = "#Gain is in degrees advance per rpm away from target"
|
||||
field = "#A good starting point is 0.1 = 10 deg per 100 rpm"
|
||||
field = "Proportional gain", idleTimingPid_pFactor, {useIdleTimingPidControl == 1}
|
||||
field = "Derivative gain", idleTimingPid_dFactor, {useIdleTimingPidControl == 1}
|
||||
field = ""
|
||||
field = "Min adjustment (retard)", idleTimingPid_minValue, {useIdleTimingPidControl == 1}
|
||||
field = "Max adjustment (advance)", idleTimingPid_maxValue, {useIdleTimingPidControl == 1}
|
||||
field = ""
|
||||
field = "#Use debug mode 'Timing' to view idle timing adjustment"
|
||||
|
||||
; Engine->Fan Settings
|
||||
dialog = fanSetting, "Fan Settings"
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
package com.rusefi.config.generated;
|
||||
|
||||
// this file was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Dec 24 12:32:41 UTC 2020
|
||||
// this file was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Dec 30 13:37:13 UTC 2020
|
||||
|
||||
// by class com.rusefi.output.FileJavaFieldsConsumer
|
||||
import com.rusefi.config.*;
|
||||
|
|
@ -1461,7 +1461,7 @@ public class Fields {
|
|||
public static final char TS_SD_R_COMMAND = 'r';
|
||||
public static final char TS_SD_W_COMMAND = 'w';
|
||||
public static final char TS_SET_LOGGER_SWITCH = 'l';
|
||||
public static final String TS_SIGNATURE = "rusEFI 2020.12.24.all.3247519971";
|
||||
public static final String TS_SIGNATURE = "rusEFI 2020.12.30.all.2926252025";
|
||||
public static final char TS_SINGLE_WRITE_COMMAND = 'W';
|
||||
public static final int TT_TT_1_16 = 50;
|
||||
public static final int TT_TT_2JZ_1_12 = 29;
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
<roms>
|
||||
|
||||
<!-- was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh Thu Dec 24 12:32:42 UTC 2020 -->
|
||||
<!-- was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh Wed Dec 30 13:37:14 UTC 2020 -->
|
||||
|
||||
<rom>
|
||||
<romid>
|
||||
|
|
|
|||
Loading…
Reference in New Issue