rusefi
/
rusefi-1
mirror of https://github.com/rusefi/rusefi-1.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

dead FSIO

This commit is contained in:
rusefillc 2021-08-15 02:16:24 -04:00
parent 18ca33858f
commit 5db8254eb7
2 changed files with 7 additions and 23 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
firmware/integration/rusefi_config.txt
View File

@ -1107,7 +1107,7 @@ end_struct
bit canReadEnabled;enable can_read/disable can_read
bit canWriteEnabled;enable can_write/disable can_write
bit useLinearIatSensor
bit useFSIO16ForTimingAdjustment;+See fsioTimingAdjustment
bit unusedBitWasHere16
bit tachPulseDurationAsDutyCycle,"Duty cycle","Constant time";+Treat milliseconds value as duty cycle value, i.e. 0.5ms would become 50%
bit isAlternatorControlEnabled;+This enables smart alternator control and activates the extra alternator settings.
bit invertPrimaryTriggerSignal;+This setting flips the signal from the primary engine speed sensor.
@ -1118,11 +1118,11 @@ bit cutSparkOnHardLimit,"yes","no"
bit launchFuelCutEnable
bit launchSparkCutEnable;+This is the Cut Mode normally used
bit hasFrequencyReportingMapSensor
bit useFSIO8ForServo1
bit useFSIO9ForServo2
bit useFSIO10ForServo3
bit useFSIO11ForServo4
bit useFSIO12ForServo5
bit unusedBitWasHere1
bit unusedBitWasHere2
bit unusedBitWasHere3
bit unusedBitWasHere4
bit unusedBitWasHere5
bit unusedBitHere1
bit useFSIO5ForCriticalIssueEngineStop;Sometimes we just have to shut the engine down. Use carefully!
bit useFSIO4ForSeriousEngineWarning;Sometimes we have to miss injection on purpose to attract driver's attention

18
firmware/tunerstudio/rusefi.input
View File

@ -3305,25 +3305,9 @@ cmd_set_engine_type_default = "@@TS_IO_TEST_COMMAND_char@@\x00\x31\x00\x00"
field = "use FSIO #6 for rev limiter", useFSIO6ForRevLimiter
field = "#6", fsioFormulas6
field = "#7", fsioFormulas7
field = "use FSIO #8 for servo #1", useFSIO8ForServo1
field = "#8", fsioFormulas8
field = "use FSIO #9 for servo #2", useFSIO9ForServo2
field = "#9", fsioFormulas9
field = "use FSIO #10 for servo #3", useFSIO10ForServo3
field = "#10", fsioFormulas10
field = "use FSIO #11 for servo #4", useFSIO11ForServo4
field = "#11", fsioFormulas11
field = "use FSIO #12 for servo #5", useFSIO12ForServo5
field = "#12", fsioFormulas12
field = "#13", fsioFormulas13
field = "#14", fsioFormulas14
field = "#15", fsioFormulas15
field = "use FSIO #16 for timing adjustment", useFSIO16ForTimingAdjustment
field = "#16", fsioFormulas16
dialog = fsioInputsDialog, "FSIO inputs"
field = "ADC #1", fsioAdc1
field = "ADC #2", fsioAdc2