rusefi
/
rusefi-1
mirror of https://github.com/rusefi/rusefi-1.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

per-bus verbose flag

This commit is contained in:
rusefillc 2022-02-10 10:12:48 -05:00
parent 6b99f27d74
commit 5eeac56f52
3 changed files with 10 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
firmware/controllers/can/can_rx.cpp
View File

@ -189,10 +189,13 @@ static void processCanRxImu(const CANRxFrame& frame) {
}
void processCanRxMessage(const size_t busIndex, const CANRxFrame &frame, efitick_t nowNt) {
if (engineConfiguration->verboseCan) {
if (engineConfiguration->verboseCan && busIndex == 0) {
printPacket(busIndex, frame);
} else if (engineConfiguration->verboseCan2 && busIndex == 1) {
printPacket(busIndex, frame);
}
serviceCanSubscribers(frame, nowNt);
// todo: convert to CanListener or not?

5
firmware/integration/rusefi_config.txt
View File

@ -466,7 +466,7 @@ bit displayLogicLevelsInEngineSniffer;+Shall we display real life signal or just
bit useTLE8888_stepper
bit enableMapEstimationTableFallback;+If enabled, the MAP estimate table will be used if the MAP sensor fails to estimate manifold pressure based on RPM and TPS.
bit usescriptTableForCanSniffingFiltering
bit verboseCan,"Print all","Do not print";Print incoming and outgoing CAN messages in rusEFI console
bit verboseCan,"Print all","Do not print";Print incoming and outgoing first bus CAN messages in rusEFI console
bit artificialTestMisfire,"Danger Mode","No thank you";Experimental setting that will cause a misfire\nDO NOT ENABLE.
bit issue_294_31,"si_example","nada_example"
@ -925,7 +925,8 @@ custom maf_sensor_type_e 4 bits, S32, @OFFSET@, [0:1], @@maf_sensor_type_e_enum@
bit tcuEnabled
bit canBroadcastUseChannelTwo,"second","first"
bit useRawOutputToDriveIdleStepper;+If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss
bit unusedBit_310_31
bit verboseCan2,"Print all","Do not print";Print incoming and outgoing second bus CAN messages in rusEFI console
dc_io[ETB_COUNT iterate] etbIo

5
firmware/tunerstudio/rusefi.input
View File

@ -3126,12 +3126,14 @@ cmd_set_engine_type_default = "@@TS_IO_TEST_COMMAND_char@@\x00\x31\x00\x00"
field = "RX pin", binarySerialRxPin, {useSerialPort == 1}
dialog = canHw1, "Primary CAN"
field = "Verbose Can", verboseCan
field = "Bitrate", canBaudRate
field = "RX pin", canRxPin @@if_ts_show_can_pins
field = "TX pin", canTxPin @@if_ts_show_can_pins
dialog = canHw2, "Secondary CAN"
field = "Bitrate", can2BaudRate
field = "Verbose Can2", verboseCan2
field = "Bitrate", can2BaudRate
field = "RX pin", can2RxPin @@if_ts_show_can_pins
field = "TX pin", can2TxPin @@if_ts_show_can_pins
@ -3139,7 +3141,6 @@ cmd_set_engine_type_default = "@@TS_IO_TEST_COMMAND_char@@\x00\x31\x00\x00"
field = "CAN read enabled", canReadEnabled
field = "CAN write enabled", canWriteEnabled
field = "CAN dash type", canNbcType
field = "Verbose Can", verboseCan
field = "inertia measurement unit", imuType
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
field = "rusEFI CAN data bus", canBroadcastUseChannelTwo