mirror of https://github.com/rusefi/rusefi-1.git
multi spark: random bursts of CUSTOM_OBD_SKIPPED_SPARK = 9009 error code at Abricos's #3223
This commit is contained in:
rusefi
parent
7aab88f521
commit
62b712be5c
|
|
@ -95,6 +95,11 @@ floatms_t WallFuel::adjust(floatms_t desiredFuel DECLARE_ENGINE_PARAMETER_SUFFIX
|
|||
float alpha = expf_taylor(-120 / (rpm * tau));
|
||||
float beta = CONFIG(DISPLAY_CONFIG(wwaeBeta));
|
||||
|
||||
if (engineConfiguration->debugMode == DBG_KNOCK) {
|
||||
tsOutputChannels.debugFloatField1 = alpha;
|
||||
tsOutputChannels.debugFloatField2 = beta;
|
||||
}
|
||||
|
||||
// If beta is larger than alpha, the system is underdamped.
|
||||
// For reasonable values {tau, beta}, this should only be possible
|
||||
// at extremely low engine speeds (<300rpm ish)
|
||||
|
|
@ -105,7 +110,12 @@ floatms_t WallFuel::adjust(floatms_t desiredFuel DECLARE_ENGINE_PARAMETER_SUFFIX
|
|||
|
||||
float fuelFilmMass = wallFuel;
|
||||
float M_cmd = (desiredFuel - (1 - alpha) * fuelFilmMass) / (1 - beta);
|
||||
|
||||
|
||||
if (engineConfiguration->debugMode == DBG_KNOCK) {
|
||||
tsOutputChannels.debugFloatField3 = fuelFilmMass;
|
||||
tsOutputChannels.debugFloatField4 = M_cmd;
|
||||
}
|
||||
|
||||
// We can't inject a negative amount of fuel
|
||||
// If this goes below zero we will be over-fueling slightly,
|
||||
// but that's ok.
|
||||
|
|
@ -116,6 +126,10 @@ floatms_t WallFuel::adjust(floatms_t desiredFuel DECLARE_ENGINE_PARAMETER_SUFFIX
|
|||
// remainder on walls from last time + new from this time
|
||||
float fuelFilmMassNext = alpha * fuelFilmMass + beta * M_cmd;
|
||||
|
||||
if (engineConfiguration->debugMode == DBG_KNOCK) {
|
||||
tsOutputChannels.debugFloatField5 = fuelFilmMassNext;
|
||||
}
|
||||
|
||||
DISPLAY_TEXT(Current_Wall_Fuel_Film);
|
||||
DISPLAY_FIELD(wallFuel) = fuelFilmMassNext;
|
||||
DISPLAY_TEXT(Fuel correction);
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
#include "global.h"
|
||||
#include "rusefi_enums.h"
|
||||
// was generated automatically by rusEFI tool from rusefi_enums.h // by enum2string.jar tool on Sun Sep 26 02:05:28 EDT 2021
|
||||
// was generated automatically by rusEFI tool from rusefi_enums.h // by enum2string.jar tool on Mon Sep 27 17:04:22 EDT 2021
|
||||
// see also gen_config_and_enums.bat
|
||||
|
||||
|
||||
|
|
@ -210,8 +210,6 @@ case Force_4_bytes_size_cranking_ignition_mode:
|
|||
}
|
||||
const char *getDebug_mode_e(debug_mode_e value){
|
||||
switch(value) {
|
||||
case DBG_16:
|
||||
return "DBG_16";
|
||||
case DBG_34:
|
||||
return "DBG_34";
|
||||
case DBG_ALTERNATOR_PID:
|
||||
|
|
@ -314,6 +312,8 @@ case DBG_VVT_3_PID:
|
|||
return "DBG_VVT_3_PID";
|
||||
case DBG_VVT_4_PID:
|
||||
return "DBG_VVT_4_PID";
|
||||
case DBG_WALL_WETTING:
|
||||
return "DBG_WALL_WETTING";
|
||||
case Force_4_bytes_size_debug_mode_e:
|
||||
return "Force_4_bytes_size_debug_mode_e";
|
||||
case MODE_52:
|
||||
|
|
|
|||
|
|
@ -792,7 +792,7 @@ typedef enum {
|
|||
DBG_SD_CARD = 13,
|
||||
DBG_SR5_PROTOCOL = 14,
|
||||
DBG_KNOCK = 15,
|
||||
DBG_16 = 16,
|
||||
DBG_WALL_WETTING = 16,
|
||||
/**
|
||||
* See also DBG_ELECTRONIC_THROTTLE_EXTRA
|
||||
*/
|
||||
|
|
|
|||
|
|
@ -295,7 +295,7 @@ float baseFuel;+Base mass of the per-cylinder fuel injected during cranking. Thi
|
|||
int16_t rpm;+This sets the RPM limit below which the ECU will use cranking fuel and ignition logic, typically this is around 350-450rpm. \nset cranking_rpm X;"RPM", 1, 0, 0, 3000, 0
|
||||
end_struct
|
||||
|
||||
#define debug_mode_e_enum "Alternator PID", "TPS acceleration enrichment", "GPPWM", "Idle Control", "Engine Load accl enrich", "Trigger Counters", "FSIO_ADC", "VVT1 PID", "VVT input", "Cranking", "Timing", "Closed-loop fuel corr PID", "VSS", "SD card", "sr5", "Knock", "mode16", "Electronic Throttle", "Executor", "Bench Test / TS commands", "Aux Valves", "Analog inputs #1", "INSTANT_RPM", "FSIO_EXPRESSION_1_7", "Status", "CJ125", "CAN", "MAP", "Metrics", "ETB#2", "Ion Sense", "TLE8888", "Analog inputs #2", "Dwell Metric", "INVALID", "ETB Logic", "Boost Control", "Start/Stop", "Launch", "ETB Autotune", "FSIO_COMPOSITE_LOG", "FSIO_EXPRESSION_8_14", "INVALID", "Injector Compensation", "Dyno_View", "Logic_Analyzer", "rusEFI Wideband", "TCU", "Lua", "VVT2 PID", "VVT3 PID", "VVT4 PID", "mode 52", "mode 53"
|
||||
#define debug_mode_e_enum "Alternator PID", "TPS acceleration enrichment", "GPPWM", "Idle Control", "Engine Load accl enrich", "Trigger Counters", "FSIO_ADC", "VVT1 PID", "VVT input", "Cranking", "Timing", "Closed-loop fuel corr PID", "VSS", "SD card", "sr5", "Knock", "Wall Wetting", "Electronic Throttle", "Executor", "Bench Test / TS commands", "Aux Valves", "Analog inputs #1", "INSTANT_RPM", "FSIO_EXPRESSION_1_7", "Status", "CJ125", "CAN", "MAP", "Metrics", "ETB#2", "Ion Sense", "TLE8888", "Analog inputs #2", "Dwell Metric", "INVALID", "ETB Logic", "Boost Control", "Start/Stop", "Launch", "ETB Autotune", "FSIO_COMPOSITE_LOG", "FSIO_EXPRESSION_8_14", "INVALID", "Injector Compensation", "Dyno_View", "Logic_Analyzer", "rusEFI Wideband", "TCU", "Lua", "VVT2 PID", "VVT3 PID", "VVT4 PID", "mode 52", "mode 53"
|
||||
custom debug_mode_e 4 bits, U32, @OFFSET@, [0:5], @@debug_mode_e_enum@@
|
||||
|
||||
#define VM_VVT_INACTIVE 0
|
||||
|
|
|
|||
|
|
@ -439,21 +439,21 @@ enable2ndByteCanID = false
|
|||
|
||||
; wall of debug mode :)
|
||||
; https://rusefi.com/wiki/index.php?title=Manual:Debug_fields
|
||||
; Alternator TPS Acceleration GPPWM Idle Engine Load Acc Trigger Counters VVT1 PID VVT Sync Cranking Ignition Timing Fu Corr VSS SD Card Knock ETB PID Executor InstantRpm FSIO_1_7 CJ125 CAN MAP TLE8888 Analog inputs 2 Boost Start Launcher ETB Autotune FSIO_8_14 FSIO_SPECIAL Injector flow compensation DYNO_VIEW LOGIC_ANALYZER Wideband TCU Lua VVT2 PID VVT3 PID VVT4 PID
|
||||
; 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51
|
||||
; Alternator TPS Acceleration GPPWM Idle Engine Load Acc Trigger Counters VVT1 PID VVT Sync Cranking Ignition Timing Fu Corr VSS SD Card Knock Wall Wetting ETB PID Executor InstantRpm FSIO_1_7 CJ125 CAN MAP TLE8888 Analog inputs 2 Boost Start Launcher ETB Autotune FSIO_8_14 FSIO_SPECIAL Injector flow compensation DYNO_VIEW LOGIC_ANALYZER Wideband TCU Lua VVT2 PID VVT3 PID VVT4 PID
|
||||
; 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51
|
||||
; DBG_ALTERNATOR_PID DBG_TPS_ACCEL DBG_GPPWM DBG_IDLE_CONTROL
|
||||
debugFieldF1List = bits, U08, [0:7], "Alt: Controller Output", "From TPS", "GPPWM 1", "Idle: Controller Output", "Idle output", "Channel 1 Rise Counter", "", "VVT1: Controller Output","VVT Event Position", "", "Ign IAT Corr", "", "", "Total SD", "last volts", "", "", "ETB Controller Output", "", "", "df1", "df1", "InstantRpm", "fsio 1", "24:df1", "CJ125: output", "", "", "", "", "", "", "TPS1 Pri/Sec Diff", "", "", "", "Boost Open Loop Duty", "S unused" "", "Osc Amplitude", "", "fsio 8", "idle offset", "Pressure across injector(kpa)", "VSS", "", "WB: Pump DAC duty", "", "Lua Debug 1", "VVT2: Controller Output","VVT3: Controller Output","VVT4: Controller Output"
|
||||
debugFieldF2List = bits, U08, [0:7], "Alt: I Term", "To TPS", "GPPWM 2", "Idle: I Term", "Idle df2", "Channel 2 Rise Counter", "", "VVT1: I Term", "VVT Ratio", "", "Ign CLT Corr", "", "", "Write Cnt","last filtered","", "", "ETB I Term", "", "", "df2", "df2", "InstantRPM Ratio","fsio 2", "24:df2", "CJ125: i term", "", "", "", "", "", "", "TPS2 Pri/Sec Diff", "", "", "", "Boost Closed Loop Duty","S unused" "", "Duty Amplitude", "", "fsio 9", "idle min", "Pressure ratio vs. nominal", "Speed", "", "WB: ESR", "", "Lua Debug 2", "VVT2: I Term", "VVT3: I Term", "VVT4: I Term"
|
||||
debugFieldF3List = bits, U08, [0:7], "Alt: Previous Error", "Current TPS<>TPS", "GPPWM 3", "Idle: prev error", "Idle df3", "ICU sum", "", "VVT1: prev error", "", "", "Ign FSIO Adj", "", "", "Sync Cnt", "", "", "", "ETB err", "", "", "df3", "df3", "22df3", "fsio 3", "24:df3", "CJ125: err", "", "", "", "", "", "", "TPS1/2 Diff", "", "", "", "Boost Duty", "S unused" "", "Tu", "", "fsio 10", "", "Flow ratio vs. configured", "DeltaSpeed", "", "WB: Nernst Voltage", "", "Lua Debug 3", "VVT2: prev error", "VVT3: prev error", "VVT4: prev error"
|
||||
debugFieldF4List = bits, U08, [0:7], "Alt: I Gain", "Extra Fuel", "GPPWM 4", "Idle: I Gain", "Idle df4", "VVT rise", "", "VVT1: I Gain", "", "", "Ign PID Adj", "", "", "File Cnt", "", "", "", "ETB I setting", "", "", "df4", "df4", "22df4", "fsio 4", "24:df4", "CJ125: UA", "", "MAP Estimate", "", "", "", "", "Acc Pedal Pri/Sec Diff","", "", "", "Boost Target", "S unused" "", "Ku", "", "fsio 11", "", "", "accel", "", "WB: Lambda", "", "Lua Debug 4", "VVT2: I Gain", "VVT3: I Gain", "VVT4: I Gain"
|
||||
debugFieldF5List = bits, U08, [0:7], "Alt: D Gain", "df5", "df5", "Idle: D Gain", "Idle df5", "VVT fall", "df5", "VVT1: D Gain", "", "", "", "", "", "", "", "", "", "ETB D setting", "df5", "df5", "df5", "df5", "22df5", "fsio 5", "24:df5", "CJ125: UR", "", "", "", "", "", "", "TPS1 Pri/Sec Ratio", "", "", "", "", "S unused" "", "Kp", "", "fsio 12", "", "", "", "", "", "", "Lua Debug 5", "VVT2: D Gain", "VVT3: D Gain", "VVT4: D Gain"
|
||||
debugFieldF6List = bits, U08, [0:7], "Alt: D Term", "", "", "Idle: D Term", "Idle df6", "Current Gap", "", "VVT1: D Term", "", "", "", "", "", "", "", "", "", "ETB df6", "", "", "df6", "df6", "22df6", "fsio 6", "24:df6", "cj: f7", "", "", "", "", "", "", "", "", "", "", "", "S unused" "", "Ki", "", "fsio 13", "", "", "", "", "", "", "Lua Debug 6", "VVT2: D Term", "VVT3: D Term", "VVT4: D Term"
|
||||
debugFieldF7List = bits, U08, [0:7], "Alt: Max-Value", "", "", "Idle: Max-Value", "Idle df7", "", "", "VVT1: Max-Value", "", "", "", "", "", "", "", "", "", "ETB df7", "", "", "df7", "df7", "22df7", "fsio 7", "24:df7", "cj: f7", "", "", "", "", "", "", "", "", "", "", "", "S unused" "", "Kd", "", "fsio 14", "", "", "", "", "", "", "Lua Debug 7", "", "", ""
|
||||
debugFieldI1List = bits, U08, [0:7], "Alt: P Gain", "", "", "Idle: P Gain", "Idle di1", "Channel 1 Fall Counter", "", "VVT1: P Gain", "VVT Sync Counter", "Cycle Counter", "Multispark Count", "", "", "", "hip corr", "", "", "ETB P-Gain", "t counter", "", "di1", "di1", "Spark Event Gap","", "24:di1", "CJ125: state", "read count","", "", "", "", "SPI Counter", "", "", "", "", "", "Start Count", "", "", "", "", "", "", "deltatime", "", "", "Solenoid 1 State", "Lua memory used","VVT2: P Gain", "VVT3: P Gain", "VVT4: P Gain"
|
||||
debugFieldI2List = bits, U08, [0:7], "Alt: Offset", "", "", "Idle: Offset", "Idle di2", "Channel 2 Fall Counter", "", "VVT1: Offset", "", "", "", "", "", "", "hip incor", "", "", "ETB di2", "invocationcounter", "", "di2", "di2", "Inj Event Gap", "", "24:di2", "", "write count","", "", "", "", "Latest Transmit","", "", "", "", "", "Starter Enable", "", "", "", "", "", "", "", "", "", "Solenoid 2 State", "", "VVT2: Offset", "VVT3: Offset", "VVT4: Offset"
|
||||
debugFieldI3List = bits, U08, [0:7], "Alt: Reset Cnt", "", "", "Idle: Reset Cnt", "Idle di3", "Cycle Index", "", "VVT1: 10xTarget", "", "", "", "", "", "", "", "", "", "ETB di3", "s counter", "", "di3", "di3", "22di3", "", "24:di3", "", "write err", "", "", "", "", "Latest Received","", "", "", "", "", "Starter Disable","", "", "", "", "", "", "", "", "", "Solenoid 3 State", "", "VVT2: 10xTarger", "VVT3: 10xTarger", "VVT4: 10xTarger"
|
||||
debugFieldI4List = bits, U08, [0:7], "Alt: Period", "", "", "Idle: State", "Idle di4", "Cycle Cnt 1", "", "", "", "", "", "", "", "", "", "", "", "ETB di4", "executor", "", "di4", "di4", "22di4", "", "24:di4", "", "", "", "", "", "", "Init Count", "", "", "", "", "", "S unused" "", "", "", "", "", "", "", "", "", "Solenoid 4 State", "", "", "", ""
|
||||
debugFieldI5List = bits, U08, [0:7], "", "", "", "", "Idle di5", "Cycle Cnt 2", "", "", "", "", "", "", "", "", "", "di5", "di5", "ETB di5", "max executor", "di5", "di5", "di5", "22di5", "di5", "di5", "di5", "di5", "di5", "", "di5", "di5", "di5", "", "di5", "di5", "di5", "di5", "S di5" "", "", "", "", "", "", "", "", "", "Solenoid 5 State", "", "", "", ""
|
||||
debugFieldF1List = bits, U08, [0:7], "Alt: Controller Output", "From TPS", "GPPWM 1", "Idle: Controller Output", "Idle output", "Channel 1 Rise Counter", "", "VVT1: Controller Output","VVT Event Position", "", "Ign IAT Corr", "", "", "Total SD", "last volts", "", "WW: Alpha", "ETB Controller Output", "", "", "df1", "df1", "InstantRpm", "fsio 1", "24:df1", "CJ125: output", "", "", "", "", "", "", "TPS1 Pri/Sec Diff", "", "", "", "Boost Open Loop Duty", "S unused" "", "Osc Amplitude", "", "fsio 8", "idle offset", "Pressure across injector(kpa)", "VSS", "", "WB: Pump DAC duty", "", "Lua Debug 1", "VVT2: Controller Output","VVT3: Controller Output","VVT4: Controller Output"
|
||||
debugFieldF2List = bits, U08, [0:7], "Alt: I Term", "To TPS", "GPPWM 2", "Idle: I Term", "Idle df2", "Channel 2 Rise Counter", "", "VVT1: I Term", "VVT Ratio", "", "Ign CLT Corr", "", "", "Write Cnt","last filtered","", "WW: Beta", "ETB I Term", "", "", "df2", "df2", "InstantRPM Ratio","fsio 2", "24:df2", "CJ125: i term", "", "", "", "", "", "", "TPS2 Pri/Sec Diff", "", "", "", "Boost Closed Loop Duty","S unused" "", "Duty Amplitude", "", "fsio 9", "idle min", "Pressure ratio vs. nominal", "Speed", "", "WB: ESR", "", "Lua Debug 2", "VVT2: I Term", "VVT3: I Term", "VVT4: I Term"
|
||||
debugFieldF3List = bits, U08, [0:7], "Alt: Previous Error", "Current TPS<>TPS", "GPPWM 3", "Idle: prev error", "Idle df3", "ICU sum", "", "VVT1: prev error", "", "", "Ign FSIO Adj", "", "", "Sync Cnt", "", "", "WW: film mass", "ETB err", "", "", "df3", "df3", "22df3", "fsio 3", "24:df3", "CJ125: err", "", "", "", "", "", "", "TPS1/2 Diff", "", "", "", "Boost Duty", "S unused" "", "Tu", "", "fsio 10", "", "Flow ratio vs. configured", "DeltaSpeed", "", "WB: Nernst Voltage", "", "Lua Debug 3", "VVT2: prev error", "VVT3: prev error", "VVT4: prev error"
|
||||
debugFieldF4List = bits, U08, [0:7], "Alt: I Gain", "Extra Fuel", "GPPWM 4", "Idle: I Gain", "Idle df4", "VVT rise", "", "VVT1: I Gain", "", "", "Ign PID Adj", "", "", "File Cnt", "", "", "WW: m_cmd", "ETB I setting", "", "", "df4", "df4", "22df4", "fsio 4", "24:df4", "CJ125: UA", "", "MAP Estimate", "", "", "", "", "Acc Pedal Pri/Sec Diff","", "", "", "Boost Target", "S unused" "", "Ku", "", "fsio 11", "", "", "accel", "", "WB: Lambda", "", "Lua Debug 4", "VVT2: I Gain", "VVT3: I Gain", "VVT4: I Gain"
|
||||
debugFieldF5List = bits, U08, [0:7], "Alt: D Gain", "df5", "df5", "Idle: D Gain", "Idle df5", "VVT fall", "df5", "VVT1: D Gain", "", "", "", "", "", "", "", "", "WW: film mass next","ETB D setting", "df5", "df5", "df5", "df5", "22df5", "fsio 5", "24:df5", "CJ125: UR", "", "", "", "", "", "", "TPS1 Pri/Sec Ratio", "", "", "", "", "S unused" "", "Kp", "", "fsio 12", "", "", "", "", "", "", "Lua Debug 5", "VVT2: D Gain", "VVT3: D Gain", "VVT4: D Gain"
|
||||
debugFieldF6List = bits, U08, [0:7], "Alt: D Term", "", "", "Idle: D Term", "Idle df6", "Current Gap", "", "VVT1: D Term", "", "", "", "", "", "", "", "", "", "ETB df6", "", "", "df6", "df6", "22df6", "fsio 6", "24:df6", "cj: f7", "", "", "", "", "", "", "", "", "", "", "", "S unused" "", "Ki", "", "fsio 13", "", "", "", "", "", "", "Lua Debug 6", "VVT2: D Term", "VVT3: D Term", "VVT4: D Term"
|
||||
debugFieldF7List = bits, U08, [0:7], "Alt: Max-Value", "", "", "Idle: Max-Value", "Idle df7", "", "", "VVT1: Max-Value", "", "", "", "", "", "", "", "", "", "ETB df7", "", "", "df7", "df7", "22df7", "fsio 7", "24:df7", "cj: f7", "", "", "", "", "", "", "", "", "", "", "", "S unused" "", "Kd", "", "fsio 14", "", "", "", "", "", "", "Lua Debug 7", "", "", ""
|
||||
debugFieldI1List = bits, U08, [0:7], "Alt: P Gain", "", "", "Idle: P Gain", "Idle di1", "Channel 1 Fall Counter", "", "VVT1: P Gain", "VVT Sync Counter", "Cycle Counter", "Multispark Count", "", "", "", "hip corr", "", "", "ETB P-Gain", "t counter", "", "di1", "di1", "Spark Event Gap","", "24:di1", "CJ125: state", "read count","", "", "", "", "SPI Counter", "", "", "", "", "", "Start Count", "", "", "", "", "", "", "deltatime", "", "", "Solenoid 1 State", "Lua memory used","VVT2: P Gain", "VVT3: P Gain", "VVT4: P Gain"
|
||||
debugFieldI2List = bits, U08, [0:7], "Alt: Offset", "", "", "Idle: Offset", "Idle di2", "Channel 2 Fall Counter", "", "VVT1: Offset", "", "", "", "", "", "", "hip incor", "", "", "ETB di2", "invocationcounter", "", "di2", "di2", "Inj Event Gap", "", "24:di2", "", "write count","", "", "", "", "Latest Transmit","", "", "", "", "", "Starter Enable", "", "", "", "", "", "", "", "", "", "Solenoid 2 State", "", "VVT2: Offset", "VVT3: Offset", "VVT4: Offset"
|
||||
debugFieldI3List = bits, U08, [0:7], "Alt: Reset Cnt", "", "", "Idle: Reset Cnt", "Idle di3", "Cycle Index", "", "VVT1: 10xTarget", "", "", "", "", "", "", "", "", "", "ETB di3", "s counter", "", "di3", "di3", "22di3", "", "24:di3", "", "write err", "", "", "", "", "Latest Received","", "", "", "", "", "Starter Disable","", "", "", "", "", "", "", "", "", "Solenoid 3 State", "", "VVT2: 10xTarger", "VVT3: 10xTarger", "VVT4: 10xTarger"
|
||||
debugFieldI4List = bits, U08, [0:7], "Alt: Period", "", "", "Idle: State", "Idle di4", "Cycle Cnt 1", "", "", "", "", "", "", "", "", "", "", "", "ETB di4", "executor", "", "di4", "di4", "22di4", "", "24:di4", "", "", "", "", "", "", "Init Count", "", "", "", "", "", "S unused" "", "", "", "", "", "", "", "", "", "Solenoid 4 State", "", "", "", ""
|
||||
debugFieldI5List = bits, U08, [0:7], "", "", "", "", "Idle di5", "Cycle Cnt 2", "", "", "", "", "", "", "", "", "", "di5", "di5", "ETB di5", "max executor", "di5", "di5", "di5", "22di5", "di5", "di5", "di5", "di5", "di5", "", "di5", "di5", "di5", "", "di5", "di5", "di5", "di5", "S di5" "", "", "", "", "", "", "", "", "", "Solenoid 5 State", "", "", "", ""
|
||||
|
||||
[ConstantsExtensions]
|
||||
; defaultValue is used to provide TunerStudio with a value to use in the case of
|
||||
|
|
|
|||
Loading…
Reference in New Issue