diff --git a/firmware/config/engines/bmw_e34.cpp b/firmware/config/engines/bmw_e34.cpp
index 05cbfe2d0f..aebfd639f8 100644
--- a/firmware/config/engines/bmw_e34.cpp
+++ b/firmware/config/engines/bmw_e34.cpp
@@ -61,6 +61,8 @@ void setBmwE34(engine_configuration_s *engineConfiguration) {
 	bc->injectionPins[4] = GPIO_UNASSIGNED; // #5
 	bc->injectionPins[5] = GPIO_UNASSIGNED; // #6
 
+	bc->triggerErrorPin = GPIOE_3;
+
 	/**
 	 * emulating the 60-0 trigger takes some resources, let's keep it slow by default
 	 * rpm 200
diff --git a/firmware/config/system/chconf.h b/firmware/config/system/chconf.h
index fc4908b4e1..0f7db4731f 100644
--- a/firmware/config/system/chconf.h
+++ b/firmware/config/system/chconf.h
@@ -44,9 +44,7 @@
     chDbgPanic3(__QUOTE_THIS(func)"()", __FILE__, __LINE__);                \
 }
 
-#define COMMON_IRQ_PRIORITY 6
-
-#define CORTEX_PRIORITY_SYSTICK COMMON_IRQ_PRIORITY
+#define CORTEX_PRIORITY_SYSTICK 6
 
 #define PORT_IDLE_THREAD_STACK_SIZE     1024
 
diff --git a/firmware/controllers/trigger/trigger_central.cpp b/firmware/controllers/trigger/trigger_central.cpp
index 4ee2832fea..2d08e5888b 100644
--- a/firmware/controllers/trigger/trigger_central.cpp
+++ b/firmware/controllers/trigger/trigger_central.cpp
@@ -230,7 +230,7 @@ static void triggerInfo(Engine *engine) {
 	scheduleMsg(&logger, "expected duty #0=%f/#1=%f", engineConfiguration2->triggerShape.dutyCycle[0],
 			engineConfiguration2->triggerShape.dutyCycle[1]);
 
-	scheduleMsg(&logger, "isError %s/total errors=%d %d/total revolutions=%d/self=%s",
+	scheduleMsg(&logger, "isError %s/total errors=%d ord_err=%d/total revolutions=%d/self=%s",
 			boolToString(isTriggerDecoderError()),
 			triggerCentral.triggerState.totalTriggerErrorCounter,
 			triggerCentral.triggerState.orderingErrorCounter,
@@ -250,6 +250,9 @@ static void triggerInfo(Engine *engine) {
 	scheduleMsg(&logger, "3rd trigger simulator: %s %s", hwPortname(boardConfiguration->triggerSimulatorPins[2]),
 			pinModeToString(boardConfiguration->triggerSimulatorPinModes[2]));
 
+	scheduleMsg(&logger, "trigger error extra LED: %s %s", hwPortname(boardConfiguration->triggerErrorPin),
+			pinModeToString(boardConfiguration->triggerErrorPinMode));
+
 	scheduleMsg(&logger, "primary trigger input: %s", hwPortname(boardConfiguration->triggerInputPins[0]));
 	scheduleMsg(&logger, "secondary trigger input: %s", hwPortname(boardConfiguration->triggerInputPins[1]));
 	scheduleMsg(&logger, "primary logic input: %s", hwPortname(boardConfiguration->logicAnalyzerPins[0]));
diff --git a/firmware/rusefi.cpp b/firmware/rusefi.cpp
index d1185c1a44..a679eaf927 100644
--- a/firmware/rusefi.cpp
+++ b/firmware/rusefi.cpp
@@ -270,5 +270,5 @@ int getRusEfiVersion(void) {
 		return 1; // this is here to make the compiler happy about the unused array
 	if (UNUSED_CCM_SIZE == 0)
 		return 1; // this is here to make the compiler happy about the unused array
-	return 20141122;
+	return 20141123;
 }
diff --git a/hardware/frankenso/known_issues.txt b/hardware/frankenso/known_issues.txt
index df95f50f31..aba8d312e4 100644
--- a/hardware/frankenso/known_issues.txt
+++ b/hardware/frankenso/known_issues.txt
@@ -28,6 +28,12 @@
 28) RESOLVED IN R0.2 better silkscreen for P602 & P604 - explicit "5v" "12v" "GND"
 29) RESOLVED IN R0.2 Add LED indicators to injector channels. 
 30) RESOLVED IN R0.3 3D for C1001 bulk cap has black mark on wrong side
+31)                  We've moved the upper mounting hole too far - we need to move it half way back http://rusefi.com/forum/viewtopic.php?f=4&t=735#p12500
+32)                  C1001 should be 1mm lower to improve clearance with the case
+32)                  Q411 should be 1.5mm lower to improve clearance with the case
+33)                  Q412 should be moved 3mm to the left, this would probably affect W63 which would affect the whole corner. Maybe move Q412 to the back of the board?
+34)                  rename the recently added low-side diodes and LEDs/resistors into 400 range
+
 
 For honda add-on / rewiring board
 -- Add 2A high side solinoid drive for VTec sol