mirror of https://github.com/rusefi/rusefi-1.git
This commit is contained in:
rusefi
parent
feec3db305
commit
6b371096ef
|
|
@ -0,0 +1,872 @@
|
|||
diff -uwr ChibiOS-stable_rusefi/demos/STM32/RT-STM32F334R8-NUCLEO/mcuconf.h ChibiOS-stable_16.1.x/demos/STM32/RT-STM32F334R8-NUCLEO/mcuconf.h
|
||||
--- ChibiOS-stable_rusefi/demos/STM32/RT-STM32F334R8-NUCLEO/mcuconf.h 2017-11-22 03:15:55.000000000 +0200
|
||||
+++ ChibiOS-stable_16.1.x/demos/STM32/RT-STM32F334R8-NUCLEO/mcuconf.h 2017-04-25 11:16:44.000000000 +0300
|
||||
@@ -67,7 +67,7 @@
|
||||
#define STM32_ADC_USE_ADC1 FALSE
|
||||
#define STM32_ADC_USE_ADC2 FALSE
|
||||
#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
|
||||
-#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
|
||||
+#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1)
|
||||
#define STM32_ADC_ADC1_DMA_PRIORITY 2
|
||||
#define STM32_ADC_ADC2_DMA_PRIORITY 2
|
||||
#define STM32_ADC_ADC12_IRQ_PRIORITY 5
|
||||
diff -uwr ChibiOS-stable_rusefi/os/common/ports/ARMCMx/compilers/GCC/rules.mk ChibiOS-stable_16.1.x/os/common/ports/ARMCMx/compilers/GCC/rules.mk
|
||||
--- ChibiOS-stable_rusefi/os/common/ports/ARMCMx/compilers/GCC/rules.mk 2017-11-22 03:15:55.000000000 +0200
|
||||
+++ ChibiOS-stable_16.1.x/os/common/ports/ARMCMx/compilers/GCC/rules.mk 2017-04-25 11:16:44.000000000 +0300
|
||||
@@ -93,9 +93,8 @@
|
||||
TCOBJS := $(addprefix $(OBJDIR)/, $(notdir $(TCSRC:.c=.o)))
|
||||
TCPPOBJS := $(addprefix $(OBJDIR)/, $(notdir $(TCPPSRC:.cpp=.o)))
|
||||
ASMOBJS := $(addprefix $(OBJDIR)/, $(notdir $(ASMSRC:.s=.o)))
|
||||
-#ASMXOBJS := $(addprefix $(OBJDIR)/, $(notdir $(ASMXSRC:.S=.o)))
|
||||
-#OBJS := $(ASMXOBJS) $(ASMOBJS) $(ACOBJS) $(TCOBJS) $(ACPPOBJS) $(TCPPOBJS)
|
||||
-OBJS := $(ASMOBJS) $(ACOBJS) $(TCOBJS) $(ACPPOBJS) $(TCPPOBJS)
|
||||
+ASMXOBJS := $(addprefix $(OBJDIR)/, $(notdir $(ASMXSRC:.S=.o)))
|
||||
+OBJS := $(ASMXOBJS) $(ASMOBJS) $(ACOBJS) $(TCOBJS) $(ACPPOBJS) $(TCPPOBJS)
|
||||
|
||||
# Paths
|
||||
IINCDIR := $(patsubst %,-I%,$(INCDIR) $(DINCDIR) $(UINCDIR))
|
||||
@@ -227,14 +226,14 @@
|
||||
@$(AS) -c $(ASFLAGS) -I. $(IINCDIR) $< -o $@
|
||||
endif
|
||||
|
||||
-#$(ASMXOBJS) : $(OBJDIR)/%.o : %.S Makefile
|
||||
-#ifeq ($(USE_VERBOSE_COMPILE),yes)
|
||||
-# @echo
|
||||
-# $(CC) -c $(ASXFLAGS) $(TOPT) -I. $(IINCDIR) $< -o $@
|
||||
-#else
|
||||
-# @echo Compiling $(<F)
|
||||
-# @$(CC) -c $(ASXFLAGS) $(TOPT) -I. $(IINCDIR) $< -o $@
|
||||
-#endif
|
||||
+$(ASMXOBJS) : $(OBJDIR)/%.o : %.S Makefile
|
||||
+ifeq ($(USE_VERBOSE_COMPILE),yes)
|
||||
+ @echo
|
||||
+ $(CC) -c $(ASXFLAGS) $(TOPT) -I. $(IINCDIR) $< -o $@
|
||||
+else
|
||||
+ @echo Compiling $(<F)
|
||||
+ @$(CC) -c $(ASXFLAGS) $(TOPT) -I. $(IINCDIR) $< -o $@
|
||||
+endif
|
||||
|
||||
$(BUILDDIR)/$(PROJECT).elf: $(OBJS) $(LDSCRIPT)
|
||||
ifeq ($(USE_VERBOSE_COMPILE),yes)
|
||||
diff -uwr ChibiOS-stable_rusefi/os/common/ports/ARMCMx/compilers/GCC/vectors.c ChibiOS-stable_16.1.x/os/common/ports/ARMCMx/compilers/GCC/vectors.c
|
||||
--- ChibiOS-stable_rusefi/os/common/ports/ARMCMx/compilers/GCC/vectors.c 2017-11-22 03:15:55.000000000 +0200
|
||||
+++ ChibiOS-stable_16.1.x/os/common/ports/ARMCMx/compilers/GCC/vectors.c 2017-04-25 11:16:44.000000000 +0300
|
||||
@@ -43,7 +43,6 @@
|
||||
* @notapi
|
||||
*/
|
||||
/*lint -save -e9075 [8.4] All symbols are invoked from asm context.*/
|
||||
-__attribute__((weak))
|
||||
void _unhandled_exception(void) {
|
||||
/*lint -restore*/
|
||||
|
||||
Only in ChibiOS-stable_rusefi/os/common: startup
|
||||
diff -uwr ChibiOS-stable_rusefi/os/hal/include/uart.h ChibiOS-stable_16.1.x/os/hal/include/uart.h
|
||||
--- ChibiOS-stable_rusefi/os/hal/include/uart.h 2017-11-22 03:15:55.000000000 +0200
|
||||
+++ ChibiOS-stable_16.1.x/os/hal/include/uart.h 2017-04-25 11:16:44.000000000 +0300
|
||||
@@ -185,23 +185,6 @@
|
||||
#define _uart_wakeup_rx_error_isr(uartp)
|
||||
#endif /* !UART_USE_WAIT */
|
||||
|
||||
-#if (UART_USE_WAIT == TRUE) || defined(__DOXYGEN__)
|
||||
-/**
|
||||
- * @brief Wakes up the waiting thread in case of RX timeout.
|
||||
- *
|
||||
- * @param[in] uartp pointer to the @p UARTDriver object
|
||||
- *
|
||||
- * @notapi
|
||||
- */
|
||||
-#define _uart_wakeup_rx_timeout_isr(uartp) { \
|
||||
- osalSysLockFromISR(); \
|
||||
- osalThreadResumeI(&(uartp)->threadrx, MSG_TIMEOUT); \
|
||||
- osalSysUnlockFromISR(); \
|
||||
-}
|
||||
-#else /* !UART_USE_WAIT */
|
||||
-#define _uart_wakeup_rx_timeout_isr(uartp)
|
||||
-#endif /* !UART_USE_WAIT */
|
||||
-
|
||||
/**
|
||||
* @brief Common ISR code for early TX.
|
||||
* @details This code handles the portable part of the ISR code:
|
||||
@@ -275,27 +258,6 @@
|
||||
}
|
||||
|
||||
/**
|
||||
- * @brief Common ISR code for RX half-transfer data.
|
||||
- * @details This code handles the portable part of the ISR code:
|
||||
- * - Callback invocation.
|
||||
- * - Waiting thread wakeup, if any.
|
||||
- * - Driver state transitions.
|
||||
- * .
|
||||
- * @note This macro is meant to be used in the low level drivers
|
||||
- * implementation only.
|
||||
- *
|
||||
- * @param[in] uartp pointer to the @p UARTDriver object
|
||||
- * @param[in] full flag set to 1 for the second half, and 0 for the first half
|
||||
- *
|
||||
- * @notapi
|
||||
- */
|
||||
-#define _uart_rx_half_isr_code(uartp, full) { \
|
||||
- if ((uartp)->config->rxhalf_cb != NULL) \
|
||||
- (uartp)->config->rxhalf_cb(uartp, full); \
|
||||
-}
|
||||
-
|
||||
-
|
||||
-/**
|
||||
* @brief Common ISR code for RX error.
|
||||
* @details This code handles the portable part of the ISR code:
|
||||
* - Callback invocation.
|
||||
@@ -317,6 +279,7 @@
|
||||
_uart_wakeup_rx_error_isr(uartp); \
|
||||
}
|
||||
|
||||
+
|
||||
/**
|
||||
* @brief Common ISR code for RX on idle.
|
||||
* @details This code handles the portable part of the ISR code:
|
||||
@@ -335,28 +298,6 @@
|
||||
if ((uartp)->config->rxchar_cb != NULL) \
|
||||
(uartp)->config->rxchar_cb(uartp, (uartp)->rxbuf); \
|
||||
}
|
||||
-
|
||||
-/**
|
||||
- * @brief Timeout ISR code for receiver.
|
||||
- * @details This code handles the portable part of the ISR code:
|
||||
- * - Callback invocation.
|
||||
- * - Waiting thread wakeup, if any.
|
||||
- * - Driver state transitions.
|
||||
- * .
|
||||
- * @note This macro is meant to be used in the low level drivers
|
||||
- * implementation only.
|
||||
- *
|
||||
- * @param[in] uartp pointer to the @p UARTDriver object
|
||||
- *
|
||||
- * @notapi
|
||||
- */
|
||||
-#define _uart_timeout_isr_code(uartp) { \
|
||||
- if ((uartp)->config->timeout_cb != NULL) { \
|
||||
- (uartp)->config->timeout_cb(uartp); \
|
||||
- } \
|
||||
- _uart_wakeup_rx_timeout_isr(uartp); \
|
||||
-}
|
||||
-
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
diff -uwr ChibiOS-stable_rusefi/os/hal/lib/streams/chprintf.c ChibiOS-stable_16.1.x/os/hal/lib/streams/chprintf.c
|
||||
--- ChibiOS-stable_rusefi/os/hal/lib/streams/chprintf.c 2017-11-22 03:15:55.000000000 +0200
|
||||
+++ ChibiOS-stable_16.1.x/os/hal/lib/streams/chprintf.c 2017-04-25 11:16:44.000000000 +0300
|
||||
@@ -32,9 +32,7 @@
|
||||
#include "memstreams.h"
|
||||
|
||||
#define MAX_FILLER 11
|
||||
-#define MAX_FLOAT_PRECISION 9
|
||||
-#define DEFAULT_FLOAT_PRECISION 2
|
||||
-
|
||||
+#define FLOAT_PRECISION 9
|
||||
|
||||
static char *long_to_string_with_divisor(char *p,
|
||||
long num,
|
||||
@@ -75,22 +73,15 @@
|
||||
}
|
||||
|
||||
#if CHPRINTF_USE_FLOAT
|
||||
-static const long pow10[MAX_FLOAT_PRECISION] = {
|
||||
+static const long pow10[FLOAT_PRECISION] = {
|
||||
10, 100, 1000, 10000, 100000, 1000000, 10000000, 100000000, 1000000000
|
||||
};
|
||||
|
||||
static char *ftoa(char *p, double num, unsigned long precision) {
|
||||
- if (num < 0) {
|
||||
- *p++ = '-';
|
||||
- return ftoa(p, -num, precision);
|
||||
- }
|
||||
long l;
|
||||
|
||||
- if (precision == 0) {
|
||||
- precision = DEFAULT_FLOAT_PRECISION;
|
||||
- } else if (precision > MAX_FLOAT_PRECISION) {
|
||||
- precision = MAX_FLOAT_PRECISION;
|
||||
- }
|
||||
+ if ((precision == 0) || (precision > FLOAT_PRECISION))
|
||||
+ precision = FLOAT_PRECISION;
|
||||
precision = pow10[precision - 1];
|
||||
|
||||
l = (long)num;
|
||||
@@ -140,7 +131,6 @@
|
||||
char tmpbuf[MAX_FILLER + 1];
|
||||
#endif
|
||||
|
||||
-
|
||||
while (true) {
|
||||
c = *fmt++;
|
||||
if (c == 0)
|
||||
diff -uwr ChibiOS-stable_rusefi/os/hal/ports/STM32/LLD/I2Cv1/i2c_lld.c ChibiOS-stable_16.1.x/os/hal/ports/STM32/LLD/I2Cv1/i2c_lld.c
|
||||
--- ChibiOS-stable_rusefi/os/hal/ports/STM32/LLD/I2Cv1/i2c_lld.c 2017-11-22 03:15:55.000000000 +0200
|
||||
+++ ChibiOS-stable_16.1.x/os/hal/ports/STM32/LLD/I2Cv1/i2c_lld.c 2017-04-25 11:16:44.000000000 +0300
|
||||
@@ -537,9 +537,6 @@
|
||||
void i2c_lld_start(I2CDriver *i2cp) {
|
||||
I2C_TypeDef *dp = i2cp->i2c;
|
||||
|
||||
- /* If in stopped state then enables the I2C and DMA clocks.*/
|
||||
- if (i2cp->state == I2C_STOP) {
|
||||
-
|
||||
i2cp->txdmamode = STM32_DMA_CR_PSIZE_BYTE | STM32_DMA_CR_MSIZE_BYTE |
|
||||
STM32_DMA_CR_MINC | STM32_DMA_CR_DMEIE |
|
||||
STM32_DMA_CR_TEIE | STM32_DMA_CR_TCIE |
|
||||
@@ -549,6 +546,9 @@
|
||||
STM32_DMA_CR_TEIE | STM32_DMA_CR_TCIE |
|
||||
STM32_DMA_CR_DIR_P2M;
|
||||
|
||||
+ /* If in stopped state then enables the I2C and DMA clocks.*/
|
||||
+ if (i2cp->state == I2C_STOP) {
|
||||
+
|
||||
#if STM32_I2C_USE_I2C1
|
||||
if (&I2CD1 == i2cp) {
|
||||
bool b;
|
||||
diff -uwr ChibiOS-stable_rusefi/os/hal/ports/STM32/LLD/I2Cv2/i2c_lld.c ChibiOS-stable_16.1.x/os/hal/ports/STM32/LLD/I2Cv2/i2c_lld.c
|
||||
--- ChibiOS-stable_rusefi/os/hal/ports/STM32/LLD/I2Cv2/i2c_lld.c 2017-11-22 03:15:55.000000000 +0200
|
||||
+++ ChibiOS-stable_16.1.x/os/hal/ports/STM32/LLD/I2Cv2/i2c_lld.c 2017-04-25 11:16:44.000000000 +0300
|
||||
@@ -672,18 +672,18 @@
|
||||
void i2c_lld_start(I2CDriver *i2cp) {
|
||||
I2C_TypeDef *dp = i2cp->i2c;
|
||||
|
||||
- /* Make sure I2C peripheral is disabled */
|
||||
- dp->CR1 &= ~I2C_CR1_PE;
|
||||
-
|
||||
- /* If in stopped state then enables the I2C and DMA clocks.*/
|
||||
- if (i2cp->state == I2C_STOP) {
|
||||
-
|
||||
#if STM32_I2C_USE_DMA == TRUE
|
||||
/* Common DMA modes.*/
|
||||
i2cp->txdmamode = DMAMODE_COMMON | STM32_DMA_CR_DIR_M2P;
|
||||
i2cp->rxdmamode = DMAMODE_COMMON | STM32_DMA_CR_DIR_P2M;
|
||||
#endif
|
||||
|
||||
+ /* Make sure I2C peripheral is disabled */
|
||||
+ dp->CR1 &= ~I2C_CR1_PE;
|
||||
+
|
||||
+ /* If in stopped state then enables the I2C and DMA clocks.*/
|
||||
+ if (i2cp->state == I2C_STOP) {
|
||||
+
|
||||
#if STM32_I2C_USE_I2C1
|
||||
if (&I2CD1 == i2cp) {
|
||||
|
||||
diff -uwr ChibiOS-stable_rusefi/os/hal/ports/STM32/LLD/RTCv1/rtc_lld.c ChibiOS-stable_16.1.x/os/hal/ports/STM32/LLD/RTCv1/rtc_lld.c
|
||||
--- ChibiOS-stable_rusefi/os/hal/ports/STM32/LLD/RTCv1/rtc_lld.c 2017-11-22 03:15:55.000000000 +0200
|
||||
+++ ChibiOS-stable_16.1.x/os/hal/ports/STM32/LLD/RTCv1/rtc_lld.c 2017-04-25 11:16:44.000000000 +0300
|
||||
@@ -137,7 +137,7 @@
|
||||
t = localtime_r((time_t *)&(tv_sec), &tim);
|
||||
osalDbgAssert(t != NULL, "conversion failed");
|
||||
#else
|
||||
- t = localtime(&tv_sec);
|
||||
+ struct tm *t = localtime(&tv_sec);
|
||||
memcpy(&tim, t, sizeof(struct tm));
|
||||
#endif
|
||||
|
||||
diff -uwr ChibiOS-stable_rusefi/os/hal/ports/STM32/LLD/RTCv2/rtc_lld.c ChibiOS-stable_16.1.x/os/hal/ports/STM32/LLD/RTCv2/rtc_lld.c
|
||||
--- ChibiOS-stable_rusefi/os/hal/ports/STM32/LLD/RTCv2/rtc_lld.c 2017-11-22 03:15:55.000000000 +0200
|
||||
+++ ChibiOS-stable_16.1.x/os/hal/ports/STM32/LLD/RTCv2/rtc_lld.c 2017-04-25 11:16:44.000000000 +0300
|
||||
@@ -27,7 +27,6 @@
|
||||
*/
|
||||
|
||||
#include "hal.h"
|
||||
-#include "rusefi_lse_fix.h"
|
||||
|
||||
#if HAL_USE_RTC || defined(__DOXYGEN__)
|
||||
|
||||
@@ -76,11 +75,10 @@
|
||||
* @notapi
|
||||
*/
|
||||
static void rtc_enter_init(void) {
|
||||
- int counter = 0;
|
||||
+
|
||||
RTCD1.rtc->ISR |= RTC_ISR_INIT;
|
||||
- while ((RTCD1.rtc->ISR & RTC_ISR_INITF) == 0 && ++counter < LSE_TIMEOUT)
|
||||
+ while ((RTCD1.rtc->ISR & RTC_ISR_INITF) == 0)
|
||||
;
|
||||
-
|
||||
}
|
||||
|
||||
/**
|
||||
@@ -349,16 +347,13 @@
|
||||
rtc_enter_init();
|
||||
rtcp->rtc->TR = tr;
|
||||
rtcp->rtc->DR = dr;
|
||||
- rtcp->rtc->CR = (rtcp->rtc->CR & ~(1U << RTC_CR_BKP_OFFSET)) |
|
||||
- (timespec->dstflag << RTC_CR_BKP_OFFSET);
|
||||
+ rtcp->rtc->CR |= timespec->dstflag << RTC_CR_BKP_OFFSET;
|
||||
rtc_exit_init();
|
||||
|
||||
/* Leaving a reentrant critical zone.*/
|
||||
osalSysRestoreStatusX(sts);
|
||||
}
|
||||
|
||||
-extern bool rtcWorks;
|
||||
-
|
||||
/**
|
||||
* @brief Get current time.
|
||||
* @note The function can be called from any context.
|
||||
@@ -379,13 +374,10 @@
|
||||
/* Entering a reentrant critical zone.*/
|
||||
sts = osalSysGetStatusAndLockX();
|
||||
|
||||
- int counter = 0; \
|
||||
/* Synchronization with the RTC and reading the registers, note
|
||||
DR must be read last.*/
|
||||
- while ((rtcp->rtc->ISR & RTC_ISR_RSF) == 0 && rtcWorks && ++counter <LSE_TIMEOUT)
|
||||
+ while ((rtcp->rtc->ISR & RTC_ISR_RSF) == 0)
|
||||
;
|
||||
- if (counter==LSE_TIMEOUT) {rtcWorks = false; } \
|
||||
-
|
||||
#if STM32_RTC_HAS_SUBSECONDS
|
||||
ssr = rtcp->rtc->SSR;
|
||||
#endif /* STM32_RTC_HAS_SUBSECONDS */
|
||||
diff -uwr ChibiOS-stable_rusefi/os/hal/ports/STM32/LLD/RTCv2/rtc_lld.h ChibiOS-stable_16.1.x/os/hal/ports/STM32/LLD/RTCv2/rtc_lld.h
|
||||
--- ChibiOS-stable_rusefi/os/hal/ports/STM32/LLD/RTCv2/rtc_lld.h 2017-11-22 03:15:55.000000000 +0200
|
||||
+++ ChibiOS-stable_16.1.x/os/hal/ports/STM32/LLD/RTCv2/rtc_lld.h 2017-04-25 11:16:44.000000000 +0300
|
||||
@@ -29,7 +29,6 @@
|
||||
#ifndef _RTC_LLD_H_
|
||||
#define _RTC_LLD_H_
|
||||
|
||||
-
|
||||
#if HAL_USE_RTC || defined(__DOXYGEN__)
|
||||
|
||||
/*===========================================================================*/
|
||||
Only in ChibiOS-stable_rusefi/os/hal/ports/STM32/LLD/RTCv2: rusefi_lse_fix.h
|
||||
diff -uwr ChibiOS-stable_rusefi/os/hal/ports/STM32/LLD/SPIv1/spi_lld.c ChibiOS-stable_16.1.x/os/hal/ports/STM32/LLD/SPIv1/spi_lld.c
|
||||
--- ChibiOS-stable_rusefi/os/hal/ports/STM32/LLD/SPIv1/spi_lld.c 2017-11-22 03:15:55.000000000 +0200
|
||||
+++ ChibiOS-stable_16.1.x/os/hal/ports/STM32/LLD/SPIv1/spi_lld.c 2017-04-25 11:16:44.000000000 +0300
|
||||
@@ -514,8 +514,6 @@
|
||||
*/
|
||||
void spi_lld_ignore(SPIDriver *spip, size_t n) {
|
||||
|
||||
- osalDbgAssert(n < 65536, "unsupported DMA transfer size");
|
||||
-
|
||||
dmaStreamSetMemory0(spip->dmarx, &dummyrx);
|
||||
dmaStreamSetTransactionSize(spip->dmarx, n);
|
||||
dmaStreamSetMode(spip->dmarx, spip->rxdmamode);
|
||||
@@ -546,8 +544,6 @@
|
||||
void spi_lld_exchange(SPIDriver *spip, size_t n,
|
||||
const void *txbuf, void *rxbuf) {
|
||||
|
||||
- osalDbgAssert(n < 65536, "unsupported DMA transfer size");
|
||||
-
|
||||
dmaStreamSetMemory0(spip->dmarx, rxbuf);
|
||||
dmaStreamSetTransactionSize(spip->dmarx, n);
|
||||
dmaStreamSetMode(spip->dmarx, spip->rxdmamode| STM32_DMA_CR_MINC);
|
||||
@@ -575,8 +571,6 @@
|
||||
*/
|
||||
void spi_lld_send(SPIDriver *spip, size_t n, const void *txbuf) {
|
||||
|
||||
- osalDbgAssert(n < 65536, "unsupported DMA transfer size");
|
||||
-
|
||||
dmaStreamSetMemory0(spip->dmarx, &dummyrx);
|
||||
dmaStreamSetTransactionSize(spip->dmarx, n);
|
||||
dmaStreamSetMode(spip->dmarx, spip->rxdmamode);
|
||||
@@ -604,8 +598,6 @@
|
||||
*/
|
||||
void spi_lld_receive(SPIDriver *spip, size_t n, void *rxbuf) {
|
||||
|
||||
- osalDbgAssert(n < 65536, "unsupported DMA transfer size");
|
||||
-
|
||||
dmaStreamSetMemory0(spip->dmarx, rxbuf);
|
||||
dmaStreamSetTransactionSize(spip->dmarx, n);
|
||||
dmaStreamSetMode(spip->dmarx, spip->rxdmamode | STM32_DMA_CR_MINC);
|
||||
diff -uwr ChibiOS-stable_rusefi/os/hal/ports/STM32/LLD/SPIv2/spi_lld.c ChibiOS-stable_16.1.x/os/hal/ports/STM32/LLD/SPIv2/spi_lld.c
|
||||
--- ChibiOS-stable_rusefi/os/hal/ports/STM32/LLD/SPIv2/spi_lld.c 2017-11-22 03:15:55.000000000 +0200
|
||||
+++ ChibiOS-stable_16.1.x/os/hal/ports/STM32/LLD/SPIv2/spi_lld.c 2017-04-25 11:16:44.000000000 +0300
|
||||
@@ -515,8 +515,6 @@
|
||||
*/
|
||||
void spi_lld_ignore(SPIDriver *spip, size_t n) {
|
||||
|
||||
- osalDbgAssert(n < 65536, "unsupported DMA transfer size");
|
||||
-
|
||||
dmaStreamSetMemory0(spip->dmarx, &dummyrx);
|
||||
dmaStreamSetTransactionSize(spip->dmarx, n);
|
||||
dmaStreamSetMode(spip->dmarx, spip->rxdmamode);
|
||||
@@ -547,8 +545,6 @@
|
||||
void spi_lld_exchange(SPIDriver *spip, size_t n,
|
||||
const void *txbuf, void *rxbuf) {
|
||||
|
||||
- osalDbgAssert(n < 65536, "unsupported DMA transfer size");
|
||||
-
|
||||
dmaStreamSetMemory0(spip->dmarx, rxbuf);
|
||||
dmaStreamSetTransactionSize(spip->dmarx, n);
|
||||
dmaStreamSetMode(spip->dmarx, spip->rxdmamode | STM32_DMA_CR_MINC);
|
||||
@@ -576,8 +572,6 @@
|
||||
*/
|
||||
void spi_lld_send(SPIDriver *spip, size_t n, const void *txbuf) {
|
||||
|
||||
- osalDbgAssert(n < 65536, "unsupported DMA transfer size");
|
||||
-
|
||||
dmaStreamSetMemory0(spip->dmarx, &dummyrx);
|
||||
dmaStreamSetTransactionSize(spip->dmarx, n);
|
||||
dmaStreamSetMode(spip->dmarx, spip->rxdmamode);
|
||||
@@ -605,8 +599,6 @@
|
||||
*/
|
||||
void spi_lld_receive(SPIDriver *spip, size_t n, void *rxbuf) {
|
||||
|
||||
- osalDbgAssert(n < 65536, "unsupported DMA transfer size");
|
||||
-
|
||||
dmaStreamSetMemory0(spip->dmarx, rxbuf);
|
||||
dmaStreamSetTransactionSize(spip->dmarx, n);
|
||||
dmaStreamSetMode(spip->dmarx, spip->rxdmamode | STM32_DMA_CR_MINC);
|
||||
diff -uwr ChibiOS-stable_rusefi/os/hal/ports/STM32/LLD/TIMv1/gpt_lld.c ChibiOS-stable_16.1.x/os/hal/ports/STM32/LLD/TIMv1/gpt_lld.c
|
||||
--- ChibiOS-stable_rusefi/os/hal/ports/STM32/LLD/TIMv1/gpt_lld.c 2017-11-22 03:15:55.000000000 +0200
|
||||
+++ ChibiOS-stable_16.1.x/os/hal/ports/STM32/LLD/TIMv1/gpt_lld.c 2017-04-25 11:16:44.000000000 +0300
|
||||
@@ -819,7 +819,7 @@
|
||||
*/
|
||||
void gpt_lld_start_timer(GPTDriver *gptp, gptcnt_t interval) {
|
||||
|
||||
- gptp->tim->ARR = (uint32_t)(interval); /* Time constant. */
|
||||
+ gptp->tim->ARR = (uint32_t)(interval - 1); /* Time constant. */
|
||||
gptp->tim->EGR = STM32_TIM_EGR_UG; /* Update event. */
|
||||
gptp->tim->CNT = 0; /* Reset counter. */
|
||||
|
||||
@@ -861,7 +861,7 @@
|
||||
*/
|
||||
void gpt_lld_polled_delay(GPTDriver *gptp, gptcnt_t interval) {
|
||||
|
||||
- gptp->tim->ARR = (uint32_t)(interval); /* Time constant. */
|
||||
+ gptp->tim->ARR = (uint32_t)(interval - 1); /* Time constant. */
|
||||
gptp->tim->EGR = STM32_TIM_EGR_UG; /* Update event. */
|
||||
gptp->tim->SR = 0; /* Clear pending IRQs. */
|
||||
gptp->tim->CR1 = STM32_TIM_CR1_OPM | STM32_TIM_CR1_URS | STM32_TIM_CR1_CEN;
|
||||
diff -uwr ChibiOS-stable_rusefi/os/hal/ports/STM32/LLD/USARTv1/uart_lld.c ChibiOS-stable_16.1.x/os/hal/ports/STM32/LLD/USARTv1/uart_lld.c
|
||||
--- ChibiOS-stable_rusefi/os/hal/ports/STM32/LLD/USARTv1/uart_lld.c 2017-11-22 03:15:55.000000000 +0200
|
||||
+++ ChibiOS-stable_16.1.x/os/hal/ports/STM32/LLD/USARTv1/uart_lld.c 2017-04-25 11:16:44.000000000 +0300
|
||||
@@ -226,11 +226,6 @@
|
||||
/* Mustn't ever set TCIE here - if done, it causes an immediate
|
||||
interrupt.*/
|
||||
cr1 = USART_CR1_UE | USART_CR1_PEIE | USART_CR1_TE | USART_CR1_RE;
|
||||
-
|
||||
- /* Add Idle interrupt if needed */
|
||||
- if (uartp->config->timeout_cb != NULL)
|
||||
- cr1 |= USART_CR1_IDLEIE;
|
||||
-
|
||||
u->CR1 = uartp->config->cr1 | cr1;
|
||||
|
||||
/* Starting the receiver idle loop.*/
|
||||
@@ -259,14 +254,7 @@
|
||||
received character and then the driver stays in the same state.*/
|
||||
_uart_rx_idle_code(uartp);
|
||||
}
|
||||
- /* DMA half-transter interrupt handling - for the 1st/2nd half transfers. */
|
||||
- else if (uartp->config->rxhalf_cb != NULL) {
|
||||
- if ((flags & STM32_DMA_ISR_HTIF) != 0) {
|
||||
- _uart_rx_half_isr_code(uartp, 0);
|
||||
- } else if ((flags & STM32_DMA_ISR_TCIF) != 0) {
|
||||
- _uart_rx_half_isr_code(uartp, 1);
|
||||
- }
|
||||
- } else {
|
||||
+ else {
|
||||
/* Receiver in active state, a callback is generated, if enabled, after
|
||||
a completed transfer.*/
|
||||
dmaStreamDisable(uartp->dmarx);
|
||||
@@ -324,11 +312,6 @@
|
||||
/* End of transmission, a callback is generated.*/
|
||||
_uart_tx2_isr_code(uartp);
|
||||
}
|
||||
-
|
||||
- /* Idle interrupt sources are only checked if enabled in CR1.*/
|
||||
- if ((sr & USART_SR_IDLE) && (cr1 & USART_CR1_IDLEIE)) {
|
||||
- _uart_timeout_isr_code(uartp);
|
||||
- }
|
||||
}
|
||||
|
||||
/*===========================================================================*/
|
||||
@@ -795,14 +778,8 @@
|
||||
/* RX DMA channel preparation.*/
|
||||
dmaStreamSetMemory0(uartp->dmarx, rxbuf);
|
||||
dmaStreamSetTransactionSize(uartp->dmarx, n);
|
||||
-
|
||||
- uint32_t mode = STM32_DMA_CR_DIR_P2M | STM32_DMA_CR_MINC | STM32_DMA_CR_TCIE;
|
||||
-
|
||||
- /* DMA half-transfer interrupt & circular mode, if needed */
|
||||
- if (uartp->config->rxhalf_cb != NULL)
|
||||
- mode |= STM32_DMA_CR_HTIE | STM32_DMA_CR_CIRC;
|
||||
-
|
||||
- dmaStreamSetMode(uartp->dmarx, uartp->dmamode | mode);
|
||||
+ dmaStreamSetMode(uartp->dmarx, uartp->dmamode | STM32_DMA_CR_DIR_P2M |
|
||||
+ STM32_DMA_CR_MINC | STM32_DMA_CR_TCIE);
|
||||
|
||||
/* Starting transfer.*/
|
||||
dmaStreamEnable(uartp->dmarx);
|
||||
diff -uwr ChibiOS-stable_rusefi/os/hal/ports/STM32/LLD/USARTv1/uart_lld.h ChibiOS-stable_16.1.x/os/hal/ports/STM32/LLD/USARTv1/uart_lld.h
|
||||
--- ChibiOS-stable_rusefi/os/hal/ports/STM32/LLD/USARTv1/uart_lld.h 2017-11-22 03:15:55.000000000 +0200
|
||||
+++ ChibiOS-stable_16.1.x/os/hal/ports/STM32/LLD/USARTv1/uart_lld.h 2017-04-25 11:16:44.000000000 +0300
|
||||
@@ -461,14 +461,6 @@
|
||||
typedef void (*uartecb_t)(UARTDriver *uartp, uartflags_t e);
|
||||
|
||||
/**
|
||||
- * @brief Receive Half-transfer UART notification callback type.
|
||||
- *
|
||||
- * @param[in] uartp pointer to the @p UARTDriver object
|
||||
- * @param[in] full flag set to 1 for the second half, and 0 for the first half
|
||||
- */
|
||||
-typedef void (*uarthcb_t)(UARTDriver *uartp, uartflags_t full);
|
||||
-
|
||||
-/**
|
||||
* @brief Driver configuration structure.
|
||||
* @note It could be empty on some architectures.
|
||||
*/
|
||||
@@ -510,16 +502,6 @@
|
||||
* @brief Initialization value for the CR3 register.
|
||||
*/
|
||||
uint16_t cr3;
|
||||
- /* Additional (optional) handlers. Placed here for the struct compatibility.*/
|
||||
- /**
|
||||
- * @brief Receiver timeout (idle) callback.
|
||||
- * @details Handles an idle interrupt for USARTv1.
|
||||
- */
|
||||
- uartcb_t timeout_cb;
|
||||
- /**
|
||||
- * @brief Half-transfer receive buffer callback.
|
||||
- */
|
||||
- uarthcb_t rxhalf_cb;
|
||||
} UARTConfig;
|
||||
|
||||
/**
|
||||
diff -uwr ChibiOS-stable_rusefi/os/hal/ports/STM32/LLD/USARTv2/serial_lld.c ChibiOS-stable_16.1.x/os/hal/ports/STM32/LLD/USARTv2/serial_lld.c
|
||||
--- ChibiOS-stable_rusefi/os/hal/ports/STM32/LLD/USARTv2/serial_lld.c 2017-11-22 03:15:55.000000000 +0200
|
||||
+++ ChibiOS-stable_16.1.x/os/hal/ports/STM32/LLD/USARTv2/serial_lld.c 2017-04-25 11:16:44.000000000 +0300
|
||||
@@ -44,24 +44,15 @@
|
||||
#define USART_ISR_LBDF USART_ISR_LBD
|
||||
#endif
|
||||
|
||||
-/* STM32L0xx/STM32F7xx ST headers difference.*/
|
||||
-#if !defined(USART_ISR_LBDF)
|
||||
-#define USART_ISR_LBDF USART_ISR_LBD
|
||||
-#endif
|
||||
-
|
||||
-/* Workarounds for those devices where UARTs are USARTs.*/
|
||||
+/* Handling the case where UART4 and UART5 are actually USARTs, this happens
|
||||
+ in the STM32F0xx.*/
|
||||
#if defined(USART4)
|
||||
#define UART4 USART4
|
||||
#endif
|
||||
+
|
||||
#if defined(USART5)
|
||||
#define UART5 USART5
|
||||
#endif
|
||||
-#if defined(USART7)
|
||||
-#define UART7 USART7
|
||||
-#endif
|
||||
-#if defined(USART8)
|
||||
-#define UART8 USART8
|
||||
-#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* Driver exported variables. */
|
||||
diff -uwr ChibiOS-stable_rusefi/os/hal/ports/STM32/LLD/USARTv2/uart_lld.c ChibiOS-stable_16.1.x/os/hal/ports/STM32/LLD/USARTv2/uart_lld.c
|
||||
--- ChibiOS-stable_rusefi/os/hal/ports/STM32/LLD/USARTv2/uart_lld.c 2017-11-22 03:15:55.000000000 +0200
|
||||
+++ ChibiOS-stable_16.1.x/os/hal/ports/STM32/LLD/USARTv2/uart_lld.c 2017-04-25 11:16:44.000000000 +0300
|
||||
@@ -30,25 +30,6 @@
|
||||
/* Driver local definitions. */
|
||||
/*===========================================================================*/
|
||||
|
||||
-/* For compatibility for those devices without LIN support in the USARTs.*/
|
||||
-#if !defined(USART_ISR_LBDF)
|
||||
-#define USART_ISR_LBDF 0
|
||||
-#endif
|
||||
-
|
||||
-#if !defined(USART_CR2_LBDIE)
|
||||
-#define USART_CR2_LBDIE 0
|
||||
-#endif
|
||||
-
|
||||
-/* STM32L0xx/STM32F7xx ST headers difference.*/
|
||||
-#if !defined(USART_ISR_LBDF)
|
||||
-#define USART_ISR_LBDF USART_ISR_LBD
|
||||
-#endif
|
||||
-
|
||||
-/* STM32L0xx/STM32F7xx ST headers difference.*/
|
||||
-#if !defined(USART_ISR_LBDF)
|
||||
-#define USART_ISR_LBDF USART_ISR_LBD
|
||||
-#endif
|
||||
-
|
||||
/* STM32L0xx/STM32F7xx ST headers difference.*/
|
||||
#if !defined(USART_ISR_LBDF)
|
||||
#define USART_ISR_LBDF USART_ISR_LBD
|
||||
@@ -118,25 +99,6 @@
|
||||
STM32_DMA_GETCHANNEL(STM32_UART_UART8_TX_DMA_STREAM, \
|
||||
STM32_UART8_TX_DMA_CHN)
|
||||
|
||||
-/* Workarounds for those devices where UARTs are USARTs.*/
|
||||
-#if defined(USART4)
|
||||
-#define UART4 USART4
|
||||
-#endif
|
||||
-#if defined(USART5)
|
||||
-#define UART5 USART5
|
||||
-#endif
|
||||
-#if defined(USART7)
|
||||
-#define UART7 USART7
|
||||
-#endif
|
||||
-#if defined(USART8)
|
||||
-#define UART8 USART8
|
||||
-#endif
|
||||
-
|
||||
-/* Workaround for more differences in headers.*/
|
||||
-#if !defined(USART_CR1_M0)
|
||||
-#define USART_CR1_M0 USART_CR1_M
|
||||
-#endif
|
||||
-
|
||||
/*===========================================================================*/
|
||||
/* Driver exported variables. */
|
||||
/*===========================================================================*/
|
||||
@@ -777,7 +739,7 @@
|
||||
|
||||
/* Static DMA setup, the transfer size depends on the USART settings,
|
||||
it is 16 bits if M=1 and PCE=0 else it is 8 bits.*/
|
||||
- if ((uartp->config->cr1 & (USART_CR1_M | USART_CR1_PCE)) == USART_CR1_M0)
|
||||
+ if ((uartp->config->cr1 & (USART_CR1_M | USART_CR1_PCE)) == USART_CR1_M)
|
||||
uartp->dmamode |= STM32_DMA_CR_PSIZE_HWORD | STM32_DMA_CR_MSIZE_HWORD;
|
||||
dmaStreamSetPeripheral(uartp->dmarx, &uartp->usart->RDR);
|
||||
dmaStreamSetPeripheral(uartp->dmatx, &uartp->usart->TDR);
|
||||
diff -uwr ChibiOS-stable_rusefi/os/hal/ports/STM32/LLD/USBv1/usb_lld.c ChibiOS-stable_16.1.x/os/hal/ports/STM32/LLD/USBv1/usb_lld.c
|
||||
--- ChibiOS-stable_rusefi/os/hal/ports/STM32/LLD/USBv1/usb_lld.c 2017-11-22 03:15:55.000000000 +0200
|
||||
+++ ChibiOS-stable_16.1.x/os/hal/ports/STM32/LLD/USBv1/usb_lld.c 2017-04-25 11:16:44.000000000 +0300
|
||||
@@ -491,7 +491,7 @@
|
||||
}
|
||||
#endif
|
||||
/* Reset procedure enforced on driver start.*/
|
||||
- usb_lld_reset(usbp);
|
||||
+ _usb_reset(usbp);
|
||||
}
|
||||
}
|
||||
|
||||
diff -uwr ChibiOS-stable_rusefi/os/hal/ports/STM32/STM32F4xx/hal_lld.c ChibiOS-stable_16.1.x/os/hal/ports/STM32/STM32F4xx/hal_lld.c
|
||||
--- ChibiOS-stable_rusefi/os/hal/ports/STM32/STM32F4xx/hal_lld.c 2017-11-22 03:15:55.000000000 +0200
|
||||
+++ ChibiOS-stable_16.1.x/os/hal/ports/STM32/STM32F4xx/hal_lld.c 2017-04-25 11:16:44.000000000 +0300
|
||||
@@ -23,7 +23,6 @@
|
||||
*/
|
||||
|
||||
#include "hal.h"
|
||||
-#include "rusefi_lse_fix.h"
|
||||
|
||||
/*===========================================================================*/
|
||||
/* Driver local definitions. */
|
||||
@@ -64,9 +63,6 @@
|
||||
RCC->BDCR = 0;
|
||||
}
|
||||
|
||||
- extern bool rtcWorks;
|
||||
-
|
||||
-
|
||||
#if STM32_LSE_ENABLED
|
||||
#if defined(STM32_LSE_BYPASS)
|
||||
/* LSE Bypass.*/
|
||||
@@ -75,8 +71,7 @@
|
||||
/* No LSE Bypass.*/
|
||||
RCC->BDCR |= RCC_BDCR_LSEON;
|
||||
#endif
|
||||
- int waitCounter = 0;
|
||||
- while ((RCC->BDCR & RCC_BDCR_LSERDY) == 0 && rtcWorks && ++waitCounter <LSE_TIMEOUT)
|
||||
+ while ((RCC->BDCR & RCC_BDCR_LSERDY) == 0)
|
||||
; /* Waits until LSE is stable. */
|
||||
#endif
|
||||
|
||||
Only in ChibiOS-stable_rusefi/os/hal/ports/simulator: posix
|
||||
diff -uwr ChibiOS-stable_rusefi/os/rt/include/chdebug.h ChibiOS-stable_16.1.x/os/rt/include/chdebug.h
|
||||
--- ChibiOS-stable_rusefi/os/rt/include/chdebug.h 2017-11-22 03:15:55.000000000 +0200
|
||||
+++ ChibiOS-stable_16.1.x/os/rt/include/chdebug.h 2017-04-25 11:16:44.000000000 +0300
|
||||
@@ -121,8 +121,8 @@
|
||||
/*===========================================================================*/
|
||||
|
||||
#if CH_DBG_SYSTEM_STATE_CHECK == TRUE
|
||||
-#define _dbg_enter_lock() {(ch.dbg.lock_cnt = (cnt_t)1); ON_LOCK_HOOK;}
|
||||
-#define _dbg_leave_lock() {ON_UNLOCK_HOOK;(ch.dbg.lock_cnt = (cnt_t)0);}
|
||||
+#define _dbg_enter_lock() (ch.dbg.lock_cnt = (cnt_t)1)
|
||||
+#define _dbg_leave_lock() (ch.dbg.lock_cnt = (cnt_t)0)
|
||||
#endif
|
||||
|
||||
/* When the state checker feature is disabled then the following functions
|
||||
diff -uwr ChibiOS-stable_rusefi/os/rt/ports/ARM/chcore.h ChibiOS-stable_16.1.x/os/rt/ports/ARM/chcore.h
|
||||
--- ChibiOS-stable_rusefi/os/rt/ports/ARM/chcore.h 2017-11-22 03:15:55.000000000 +0200
|
||||
+++ ChibiOS-stable_16.1.x/os/rt/ports/ARM/chcore.h 2017-04-25 11:16:44.000000000 +0300
|
||||
@@ -28,8 +28,6 @@
|
||||
#ifndef _CHCORE_H_
|
||||
#define _CHCORE_H_
|
||||
|
||||
-#include "chdebug.h"
|
||||
-
|
||||
/*===========================================================================*/
|
||||
/* Module constants. */
|
||||
/*===========================================================================*/
|
||||
@@ -290,8 +288,6 @@
|
||||
#define PORT_FAST_IRQ_HANDLER(id) \
|
||||
__attribute__((interrupt("FIQ"))) void id(void)
|
||||
|
||||
-void chDbgStackOverflowPanic(thread_t *otp);
|
||||
-
|
||||
/**
|
||||
* @brief Performs a context switch between two threads.
|
||||
* @details This is the most critical code in any port, this function
|
||||
@@ -309,7 +305,7 @@
|
||||
#define port_switch(ntp, otp) { \
|
||||
register struct port_intctx *r13 asm ("r13"); \
|
||||
if ((stkalign_t *)(r13 - 1) < otp->p_stklimit) \
|
||||
- chDbgStackOverflowPanic(otp); \
|
||||
+ chSysHalt("stack overflow"); \
|
||||
_port_switch_thumb(ntp, otp); \
|
||||
}
|
||||
#else
|
||||
@@ -322,7 +318,7 @@
|
||||
#define port_switch(ntp, otp) { \
|
||||
register struct port_intctx *r13 asm ("r13"); \
|
||||
if ((stkalign_t *)(r13 - 1) < otp->p_stklimit) \
|
||||
- chDbgStackOverflowPanic(otp); \
|
||||
+ chSysHalt("stack overflow"); \
|
||||
_port_switch_arm(ntp, otp); \
|
||||
}
|
||||
#else
|
||||
diff -uwr ChibiOS-stable_rusefi/os/rt/ports/SIMIA32/chcore.c ChibiOS-stable_16.1.x/os/rt/ports/SIMIA32/chcore.c
|
||||
--- ChibiOS-stable_rusefi/os/rt/ports/SIMIA32/chcore.c 2017-11-22 03:15:55.000000000 +0200
|
||||
+++ ChibiOS-stable_16.1.x/os/rt/ports/SIMIA32/chcore.c 2017-04-25 11:16:44.000000000 +0300
|
||||
@@ -25,12 +25,7 @@
|
||||
* @{
|
||||
*/
|
||||
|
||||
-#if defined(WIN32)
|
||||
#include <windows.h>
|
||||
-#else
|
||||
- #include <stdlib.h>
|
||||
- #include <sys/time.h>
|
||||
-#endif
|
||||
|
||||
#include "ch.h"
|
||||
|
||||
@@ -114,18 +109,11 @@
|
||||
* @return The realtime counter value.
|
||||
*/
|
||||
rtcnt_t port_rt_get_counter_value(void) {
|
||||
-#if defined(WIN32)
|
||||
LARGE_INTEGER n;
|
||||
|
||||
QueryPerformanceCounter(&n);
|
||||
|
||||
return (rtcnt_t)(n.QuadPart / 1000LL);
|
||||
-#else // POSIX
|
||||
- struct timeval tv;
|
||||
-
|
||||
- gettimeofday(&tv, NULL);
|
||||
- return (rtcnt_t)(tv.tv_usec);
|
||||
-#endif
|
||||
}
|
||||
|
||||
/** @} */
|
||||
diff -uwr ChibiOS-stable_rusefi/os/rt/src/chdebug.c ChibiOS-stable_16.1.x/os/rt/src/chdebug.c
|
||||
--- ChibiOS-stable_rusefi/os/rt/src/chdebug.c 2017-11-22 03:15:55.000000000 +0200
|
||||
+++ ChibiOS-stable_16.1.x/os/rt/src/chdebug.c 2017-04-25 11:16:44.000000000 +0300
|
||||
@@ -85,8 +85,6 @@
|
||||
/* Module local definitions. */
|
||||
/*===========================================================================*/
|
||||
|
||||
-extern int maxNesting;
|
||||
-
|
||||
/*===========================================================================*/
|
||||
/* Module exported variables. */
|
||||
/*===========================================================================*/
|
||||
@@ -152,7 +150,7 @@
|
||||
void _dbg_check_lock(void) {
|
||||
|
||||
if ((ch.dbg.isr_cnt != (cnt_t)0) || (ch.dbg.lock_cnt != (cnt_t)0)) {
|
||||
- chSysHalt("SV#4 misplaced chSysLock()");
|
||||
+ chSysHalt("SV#4");
|
||||
}
|
||||
_dbg_enter_lock();
|
||||
}
|
||||
@@ -178,7 +176,7 @@
|
||||
void _dbg_check_lock_from_isr(void) {
|
||||
|
||||
if ((ch.dbg.isr_cnt <= (cnt_t)0) || (ch.dbg.lock_cnt != (cnt_t)0)) {
|
||||
- chSysHalt("SV#6 misplaced chSysLockFromISR()");
|
||||
+ chSysHalt("SV#6");
|
||||
}
|
||||
_dbg_enter_lock();
|
||||
}
|
||||
@@ -208,8 +206,6 @@
|
||||
chSysHalt("SV#8");
|
||||
}
|
||||
ch.dbg.isr_cnt++;
|
||||
- if (ch.dbg.isr_cnt > maxNesting)
|
||||
- maxNesting = ch.dbg.isr_cnt;
|
||||
port_unlock_from_isr();
|
||||
}
|
||||
|
||||
@@ -239,7 +235,7 @@
|
||||
void chDbgCheckClassI(void) {
|
||||
|
||||
if ((ch.dbg.isr_cnt < (cnt_t)0) || (ch.dbg.lock_cnt <= (cnt_t)0)) {
|
||||
- chSysHalt("SV#10 misplaced I-class function");
|
||||
+ chSysHalt("SV#10");
|
||||
}
|
||||
}
|
||||
|
||||
diff -uwr ChibiOS-stable_rusefi/testhal/STM32/STM32F3xx/EXT/main.c ChibiOS-stable_16.1.x/testhal/STM32/STM32F3xx/EXT/main.c
|
||||
--- ChibiOS-stable_rusefi/testhal/STM32/STM32F3xx/EXT/main.c 2017-11-22 03:15:55.000000000 +0200
|
||||
+++ ChibiOS-stable_16.1.x/testhal/STM32/STM32F3xx/EXT/main.c 2017-04-25 11:16:44.000000000 +0300
|
||||
@@ -65,17 +65,6 @@
|
||||
{EXT_CH_MODE_DISABLED, NULL},
|
||||
{EXT_CH_MODE_DISABLED, NULL},
|
||||
{EXT_CH_MODE_DISABLED, NULL},
|
||||
- {EXT_CH_MODE_DISABLED, NULL},
|
||||
- {EXT_CH_MODE_DISABLED, NULL},
|
||||
- {EXT_CH_MODE_DISABLED, NULL},
|
||||
- {EXT_CH_MODE_DISABLED, NULL},
|
||||
- {EXT_CH_MODE_DISABLED, NULL},
|
||||
- {EXT_CH_MODE_DISABLED, NULL},
|
||||
- {EXT_CH_MODE_DISABLED, NULL},
|
||||
- {EXT_CH_MODE_DISABLED, NULL},
|
||||
- {EXT_CH_MODE_DISABLED, NULL},
|
||||
- {EXT_CH_MODE_DISABLED, NULL},
|
||||
- {EXT_CH_MODE_DISABLED, NULL},
|
||||
{EXT_CH_MODE_DISABLED, NULL}
|
||||
}
|
||||
};
|
||||
diff -uwr ChibiOS-stable_rusefi/testhal/STM32/STM32L4xx/GPT-ADC/main.c ChibiOS-stable_16.1.x/testhal/STM32/STM32L4xx/GPT-ADC/main.c
|
||||
--- ChibiOS-stable_rusefi/testhal/STM32/STM32L4xx/GPT-ADC/main.c 2017-11-22 03:15:55.000000000 +0200
|
||||
+++ ChibiOS-stable_16.1.x/testhal/STM32/STM32L4xx/GPT-ADC/main.c 2017-04-25 11:16:44.000000000 +0300
|
||||
@@ -68,24 +68,23 @@
|
||||
|
||||
/*
|
||||
* ADC conversion group.
|
||||
- * Mode: Continuous, 16 samples of 2 channels, HW triggered by
|
||||
+ * Mode: Continuous, 16 samples of 2 channels, HS triggered by
|
||||
* GPT4-TRGO.
|
||||
- * Channels: VRef, PA0.
|
||||
+ * Channels: VRef, PC1.
|
||||
*/
|
||||
static const ADCConversionGroup adcgrpcfg1 = {
|
||||
true,
|
||||
ADC_GRP1_NUM_CHANNELS,
|
||||
adccallback,
|
||||
adcerrorcallback,
|
||||
- ADC_CFGR_EXTEN_RISING | ADC_CFGR_EXTSEL_SRC(12), /* CFGR */
|
||||
+ ADC_CFGR_CONT | ADC_CFGR_EXTEN_RISING | ADC_CFGR_EXTSEL_SRC(12), /* CFGR */
|
||||
ADC_TR(0, 4095), /* TR1 */
|
||||
{ /* SMPR[2]*/
|
||||
- ADC_SMPR1_SMP_AN0(ADC_SMPR_SMP_247P5) |
|
||||
- ADC_SMPR1_SMP_AN5(ADC_SMPR_SMP_247P5),
|
||||
- 0
|
||||
+ ADC_SMPR1_SMP_AN0(ADC_SMPR_SMP_247P5),
|
||||
+ ADC_SMPR1_SMP_AN2(ADC_SMPR_SMP_247P5)
|
||||
},
|
||||
{ /* SQR[4] */
|
||||
- ADC_SQR1_SQ1_N(ADC_CHANNEL_IN0) | ADC_SQR1_SQ2_N(ADC_CHANNEL_IN5),
|
||||
+ ADC_SQR1_SQ1_N(ADC_CHANNEL_IN0) | ADC_SQR1_SQ2_N(ADC_CHANNEL_IN2),
|
||||
0,
|
||||
0,
|
||||
0
|
||||
@@ -146,11 +145,9 @@
|
||||
adcSTM32EnableVREF(&ADCD1);
|
||||
adcSTM32EnableTS(&ADCD1);
|
||||
|
||||
- palSetLineMode(LINE_ARD_A0, PAL_MODE_INPUT_ANALOG);
|
||||
-
|
||||
/*
|
||||
* Starts an ADC continuous conversion triggered with a period of
|
||||
- * 1/10000 second.
|
||||
+ * 1/1000000 second.
|
||||
*/
|
||||
adcStartConversion(&ADCD1, &adcgrpcfg1, samples1, ADC_GRP1_BUF_DEPTH);
|
||||
gptStartContinuous(&GPTD4, 100);
|
||||
|
|
@ -4,6 +4,42 @@ At the moment rusEfi custom version of ChibiOS has the following changes:
|
|||
|
||||
1) LSE auto-detection, see rusefi_lse_fix.h see LSE_TIMEOUT
|
||||
|
||||
2) ?
|
||||
2) Changed "STM32_ADC_ADC2_DMA_STREAM" in demos/STM32/RT-STM32F334R8-NUCLEO/mcuconf.h
|
||||
|
||||
3) ?
|
||||
3) Uncommented "ASMXOBJS" support in os/common/ports/ARMCMx/compilers/GCC/rules.mk
|
||||
|
||||
4) Removed "__attribute__((weak))" in os/common/ports/ARMCMx/compilers/GCC/vectors.c
|
||||
|
||||
5) Support for half/timeout-ISR for UART-DMA in /os/hal/include/uart.h and os/hal/ports/STM32/LLD/USARTv1/uart_lld.*
|
||||
|
||||
6) Changes around "FLOAT_PRECISION" and ftoa() in os/hal/lib/streams/chprintf.c
|
||||
|
||||
7) Move "(i2cp->state == I2C_STOP)" check in os/hal/ports/STM32/LLD/I2Cv*/i2c_lld.c
|
||||
|
||||
8) Use local "struct tm *t" in os/hal/ports/STM32/LLD/RTCv1/rtc_lld.c
|
||||
|
||||
9) Remove some osalDbgAssert() in os/hal/ports/STM32/LLD/SPIv*/spi_lld.c
|
||||
|
||||
10) Fix "gptp->tim->ARR = (uint32_t)(interval - 1);" in os/hal/ports/STM32/LLD/TIMv1/gpt_lld.c
|
||||
|
||||
11) Fixes for UART4-UART8, USART_ISR_* flags USART_CR1_M in os/hal/ports/STM32/LLD/USARTv2/serial_lld.c and os/hal/ports/STM32/LLD/USARTv2/uart_lld.c
|
||||
|
||||
12) Use _usb_reset() instead of usb_lld_reset() in os/hal/ports/STM32/LLD/USBv1/usb_lld.c
|
||||
|
||||
13) ON_LOCK_HOOK fix in os/rt/include/chdebug.h
|
||||
|
||||
14) Use chSysHalt() instead of chDbgStackOverflowPanic() in os/rt/ports/ARM/chcore.h
|
||||
|
||||
15) Use QueryPerformanceCounter() instead of POSIX gettimeofday() in os/rt/ports/SIMIA32/chcore.c
|
||||
|
||||
16) Change chSysHalt() and remove maxNesting in os/rt/src/chdebug.c
|
||||
|
||||
17) Remove some of EXT_CH_MODE_DISABLED in testhal/STM32/STM32F3xx/EXT/main.c
|
||||
|
||||
18) Change adcgrpcfg1 flags, palSetLineMode & minor fixes in testhal/STM32/STM32L4xx/GPT-ADC/main.c
|
||||
|
||||
New files:
|
||||
os/common/startup/SIMIA32/compilers/GCC/rules.mk
|
||||
os/hal/ports/STM32/LLD/RTCv2/rusefi_lse_fix.h
|
||||
os/hal/ports/simulator/posix/*
|
||||
|
||||
Loading…
Reference in New Issue