rusefi
/
rusefi-1
mirror of https://github.com/rusefi/rusefi-1.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

auto-sync

This commit is contained in:
rusEfi 2015-04-06 08:06:06 -05:00
parent 54a6d956e2
commit 6ea6d07b5a
5 changed files with 18 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

11
firmware/controllers/algo/advance_map.cpp
View File

@ -29,6 +29,12 @@ EXTERN_ENGINE;
static ign_Map3D_t advanceMap;
static const float iatTimingRpmBins[IGN_LOAD_COUNT] = {880, 1260, 1640, 2020, 2400, 2780, 3000, 3380, 3760, 4140, 4520, 5000, 5700, 6500, 7200, 8000};
//880 1260 1640 2020 2400 2780 3000 3380 3760 4140 4520 5000 5700 6500 7200 8000
//static const ignition_table_t default_aspire_timing_table = {
float getBaseAdvance(int rpm, float engineLoad DECLARE_ENGINE_PARAMETER_S) {
if (cisnan(engineLoad)) {
warning(OBD_PCM_Processor_Fault, "NaN engine load");
@ -57,6 +63,11 @@ float getAdvance(int rpm, float engineLoad DECLARE_ENGINE_PARAMETER_S) {
return angle;
}
void setDefaultIatTimingCorrection(DECLARE_ENGINE_PARAMETER_F) {
setTableBin2(config->ignitionIatCorrLoadBins, IGN_LOAD_COUNT, -40, 110, 1);
memcpy(config->ignitionIatCorrRpmBins, iatTimingRpmBins, sizeof(iatTimingRpmBins));
}
void prepareTimingMap(DECLARE_ENGINE_PARAMETER_F) {
advanceMap.init(config->ignitionTable, config->ignitionLoadBins,
config->ignitionRpmBins);

1
firmware/controllers/algo/advance_map.h
View File

@ -11,6 +11,7 @@
#include "engine.h"
float getAdvance(int rpm, float engineLoad DECLARE_ENGINE_PARAMETER_S);
void setDefaultIatTimingCorrection(DECLARE_ENGINE_PARAMETER_F);
void prepareTimingMap(DECLARE_ENGINE_PARAMETER_F);
#endif /* ADVANCE_H_ */

2
firmware/controllers/algo/engine_configuration.cpp
View File

@ -28,6 +28,7 @@
#include "trigger_decoder.h"
#include "engine_math.h"
#include "speed_density.h"
#include "advance_map.h"
#include "custom_engine.h"
#include "acura_rsx.h"
@ -225,6 +226,7 @@ void setDefaultConfiguration(DECLARE_ENGINE_PARAMETER_F) {
setMap(config->injectionPhase, -180);
setRpmTableBin(config->injPhaseRpmBins, FUEL_RPM_COUNT);
setFuelTablesLoadBin(10, 160 PASS_ENGINE_PARAMETER);
setDefaultIatTimingCorrection(PASS_ENGINE_PARAMETER_F);
setThermistorConfiguration(&engineConfiguration->clt, 0, 9500, 23.8889, 2100, 48.8889, 1000);
engineConfiguration->clt.bias_resistor = 1500;

2
firmware/rusefi.cpp
View File

@ -276,5 +276,5 @@ int getRusEfiVersion(void) {
return 1; // this is here to make the compiler happy about the unused array
if (UNUSED_CCM_SIZE[0] == 0)
return 1; // this is here to make the compiler happy about the unused array
return 20150405;
return 20150406;
}

4
hardware/frankenso/known_issues.txt
View File

@ -76,7 +76,9 @@
) cheaper battery holder - through-hole (need to find out footprint)
) remove some/all EGT - expand prototyping area?
) idle valve SMD diode?
) on schematics, rename INJ_xx to LOW_xx? "inj" is a bit confusing, it implies that PE6 is injector #1 while it is usually not the case
) set analog input values to match https://docs.google.com/spreadsheets/d/1LTvS7I-128Hft9uXHG1JrBxetVjGJDSBkySgVDQ6MGk/edit#gid=0
) remove 'REAR-DEFROSTER-SW' and etc from schematics
For honda add-on / rewiring board