mirror of https://github.com/rusefi/rusefi-1.git
ETB gauges & TS progress
This commit is contained in:
rusefi
parent
e3a14e5979
commit
7b4aae40c8
|
|
@ -1,4 +1,4 @@
|
|||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Tue Jun 25 02:03:09 EDT 2019
|
||||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Wed Jun 26 19:24:48 EDT 2019
|
||||
// begin
|
||||
#ifndef CONTROLLERS_GENERATED_ENGINE_CONFIGURATION_GENERATED_STRUCTURES_H
|
||||
#define CONTROLLERS_GENERATED_ENGINE_CONFIGURATION_GENERATED_STRUCTURES_H
|
||||
|
|
@ -2551,6 +2551,7 @@ struct engine_configuration_s {
|
|||
*/
|
||||
uint8_t unusedSpiPadding8[3];
|
||||
/**
|
||||
* ETB idle authority
|
||||
* offset 4036
|
||||
*/
|
||||
float etbIdleThrottleRange;
|
||||
|
|
@ -2820,4 +2821,4 @@ typedef struct persistent_config_s persistent_config_s;
|
|||
|
||||
#endif
|
||||
// end
|
||||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Tue Jun 25 02:03:09 EDT 2019
|
||||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Wed Jun 26 19:24:48 EDT 2019
|
||||
|
|
|
|||
|
|
@ -868,14 +868,14 @@
|
|||
#define GAUGE_NAME_ECU_TEMPERATURE "ECU temperature"
|
||||
#define GAUGE_NAME_ENGINE_LOAD "Engine Load"
|
||||
#define GAUGE_NAME_FUEL_BASE "fuel: base"
|
||||
#define GAUGE_NAME_FUEL_CHARGE_TEMP "fuel: charge T"
|
||||
#define GAUGE_NAME_FUEL_CHARGE_TEMP "fuel: Estimated charge temperature"
|
||||
#define GAUGE_NAME_FUEL_CLT_CORR "fuel: CLT correction"
|
||||
#define GAUGE_NAME_FUEL_CRANKING "fuel: cranking"
|
||||
#define GAUGE_NAME_FUEL_EL_EXTRA "fuel: engine load acceleration extra fuel"
|
||||
#define GAUGE_NAME_FUEL_IAT_CORR "fuel: IAT correction"
|
||||
#define GAUGE_NAME_FUEL_INJ_DUTY "fuel: injector duty cycle"
|
||||
#define GAUGE_NAME_FUEL_LAST_INJECTION "fuel: last injection"
|
||||
#define GAUGE_NAME_FUEL_PID_CORR "fuel: short correction"
|
||||
#define GAUGE_NAME_FUEL_LAST_INJECTION "fuel: Last injection"
|
||||
#define GAUGE_NAME_FUEL_PID_CORR "fuel: Short-term closed loop correction"
|
||||
#define GAUGE_NAME_FUEL_RUNNING "fuel: running"
|
||||
#define GAUGE_NAME_FUEL_TPS_EXTRA "fuel: TPS acceleration extra fuel ms"
|
||||
#define GAUGE_NAME_FUEL_TPS_ROC "fuel: TPS change"
|
||||
|
|
|
|||
|
|
@ -82,7 +82,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Tue Jun 25 02:03:09 EDT 2019
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Wed Jun 26 19:24:48 EDT 2019
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -886,7 +886,7 @@ page = 1
|
|||
;no TS info - skipping unusedSpiPadding7 offset 4029
|
||||
mc33972spiDevice = bits,U32, 4032, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4"
|
||||
;no TS info - skipping unusedSpiPadding8 offset 4033
|
||||
;no TS info - skipping etbIdleThrottleRange offset 4036
|
||||
etbIdleThrottleRange = scalar, F32, 4036, "%", 1, 0, 0, 15, 0
|
||||
;no TS info - skipping mainUnusedEnd offset 4040
|
||||
pedalToTpsTable = array, U08, 6400, [8x8],"deg", 1, 0, -720, 720, 2
|
||||
pedalToTpsPedalBins = array, U08, 6464, [8], "%", 1, 0, 0.0, 120.0, 0
|
||||
|
|
@ -1248,20 +1248,23 @@ fileVersion = { 20171101 }
|
|||
fuelPidCorrection = scalar, F32, 268, "ms", 1, 0
|
||||
coilDutyCycle = scalar, F32, 272, "perc", 1, 0
|
||||
accelerationX = scalar, S16, 276, "G", 0.01, 0
|
||||
accelerationY = scalar, S16, 276, "G", 0.01, 0
|
||||
accelerationY = scalar, S16, 278, "G", 0.01, 0
|
||||
oilPressure = scalar, F32, 280, "kPa", 1, 0.0
|
||||
fuelConsumptionPerHour=scalar, F32, 284, "kPa", 1, 0.0
|
||||
injectionOffset = scalar, F32, 288, "deg", 1, 0;
|
||||
debugIntField4 = scalar, S16, 292, "val", 1, 0.0;
|
||||
debugIntField5 = scalar, S16, 294, "val", 1, 0.0;
|
||||
recentErrorCode0 = scalar,U16, 298, "error", 1, 0
|
||||
recentErrorCode1 = scalar,U16, 300, "error", 1, 0
|
||||
recentErrorCode2 = scalar,U16, 302, "error", 1, 0
|
||||
recentErrorCode3 = scalar,U16, 304, "error", 1, 0
|
||||
recentErrorCode4 = scalar,U16, 306, "error", 1, 0
|
||||
recentErrorCode5 = scalar,U16, 308, "error", 1, 0
|
||||
recentErrorCode6 = scalar,U16, 310, "error", 1, 0
|
||||
recentErrorCode7 = scalar,U16, 312, "error", 1, 0
|
||||
recentErrorCode0 = scalar,U16, 296, "error", 1, 0
|
||||
recentErrorCode1 = scalar,U16, 298, "error", 1, 0
|
||||
recentErrorCode2 = scalar,U16, 300, "error", 1, 0
|
||||
recentErrorCode3 = scalar,U16, 302, "error", 1, 0
|
||||
recentErrorCode4 = scalar,U16, 304, "error", 1, 0
|
||||
recentErrorCode5 = scalar,U16, 306, "error", 1, 0
|
||||
recentErrorCode6 = scalar,U16, 308, "error", 1, 0
|
||||
recentErrorCode7 = scalar,U16, 310, "error", 1, 0
|
||||
etbTarget = scalar,F32, 312, "%", 1, 0
|
||||
etb1DutyCycle = scalar,F32, 316, "%", 1, 0
|
||||
etb1Error = scalar,F32, 320, "%", 1, 0
|
||||
|
||||
|
||||
;
|
||||
|
|
@ -1716,9 +1719,7 @@ fileVersion = { 20171101 }
|
|||
|
||||
[GaugeConfigurations]
|
||||
|
||||
|
||||
; warmupEnrichGauge = warmupEnrich, "Warmup Enrichment", "%", 100, 150, -1, -1, 101, 105, 0, 0
|
||||
; accelEnrichGauge = accDecEnrich, "Accel Enrich", "%", 50, 150, -1, -1, 999, 999, 0, 0
|
||||
gaugeCategory = Sensors - Extra 2
|
||||
egt1Gauge = egt1, "EGT#1", "C", 0, 2000
|
||||
egt2Gauge = egt2, "EGT#2", "C", 0, 2000
|
||||
egt3Gauge = egt3, "EGT#3", "C", 0, 2000
|
||||
|
|
@ -1728,19 +1729,15 @@ fileVersion = { 20171101 }
|
|||
egt7Gauge = egt7, "EGT#7", "C", 0, 2000
|
||||
egt8Gauge = egt8, "EGT#8", "C", 0, 2000
|
||||
rpmAccelerationGa = rpmAcceleration, "rpm delta", "dRpm", 0, 3, 0, 1, 3, 4, 1, 1
|
||||
massAirFlowValueGa = massAirFlowValue,"Air Flow", "kg/hr", 0, 50, -999, -999, 999, 999, 1, 1
|
||||
knockCountGauge = knockCount,"Knock count", "count", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
knockLevelGauge = knockLevel,"Knock level", "volts", 0, 7, 10, 10, 100, 100, 1, 2
|
||||
fuelTankLevelGauge = fuelTankLevel,"Fuel", "x", 0, 7, 10, 10, 100, 100, 1, 2
|
||||
|
||||
|
||||
|
||||
fuelTankLevelGauge = fuelTankLevel,"Fuel level", "x", 0, 7, 10, 10, 100, 100, 1, 2
|
||||
speedToRpmRatioGauge = speedToRpmRatio, "speed2rpm", "", 0, 100, 0, 0, 100, 100, 4, 4
|
||||
|
||||
gaugeCategory = Status
|
||||
warningCounterGauge = warningCounter, "Counter", "", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
lastErrorCodeGauge = lastErrorCode, "Latest Error", "", 0, 18000, 0, 0, 18000, 18000, 0, 0
|
||||
triggerErrorsCounterGauge = triggerErrorsCounter, "trg err", "count", 0, 15000, 0, 0, 6000, 6000, 0, 0
|
||||
gaugeCategory = ECU Status
|
||||
warningCounterGauge = warningCounter, "Warning count", "", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
lastErrorCodeGauge = lastErrorCode, "Last error", "", 0, 18000, 0, 0, 18000, 18000, 0, 0
|
||||
triggerErrorsCounterGauge = triggerErrorsCounter, "Trigger error count", "count", 0, 15000, 0, 0, 6000, 6000, 0, 0
|
||||
recentErrorCode0Gauge = recentErrorCode0, "Error#1", "", 0, 18000, 0, 0, 18000, 18000, 0, 0
|
||||
recentErrorCode1Gauge = recentErrorCode1, "Error#2", "", 0, 18000, 0, 0, 18000, 18000, 0, 0
|
||||
recentErrorCode2Gauge = recentErrorCode2, "Error#3", "", 0, 18000, 0, 0, 18000, 18000, 0, 0
|
||||
|
|
@ -1749,8 +1746,9 @@ gaugeCategory = Status
|
|||
recentErrorCode5Gauge = recentErrorCode5, "Error#6", "", 0, 18000, 0, 0, 18000, 18000, 0, 0
|
||||
recentErrorCode6Gauge = recentErrorCode6, "Error#7", "", 0, 18000, 0, 0, 18000, 18000, 0, 0
|
||||
recentErrorCode7Gauge = recentErrorCode7, "Error#8", "", 0, 18000, 0, 0, 18000, 18000, 0, 0
|
||||
firmwareVersionGauge = firmwareVersion , "version", "%", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
|
||||
firmwareVersionGauge = firmwareVersion , "ECU Software Version", "%", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
timeSecondsGauge = timeSeconds, "Uptime", "sec", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
|
||||
gaugeCategory = Debug
|
||||
debugFloatField1Gauge = debugFloatField1, "debug f1", "%", 0, 100, 0, 0, 100, 100, 4, 4
|
||||
debugFloatField2Gauge = debugFloatField2, "debug f2: iTerm", "%", -100, 100, 0, 0, 100, 100, 4, 4
|
||||
|
|
@ -1764,73 +1762,79 @@ gaugeCategory = Debug
|
|||
debugIntField3Gauge = debugIntField3, "debug i3", "%", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
debugIntField4Gauge = debugIntField4, "debug i4", "%", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
debugIntField5Gauge = debugIntField5, "debug i5", "%", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
timeSecondsGauge = timeSeconds, "Uptime", "sec", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
|
||||
|
||||
gaugeCategory = Sensors
|
||||
RPMGauge = RPMValue, "Engine Speed", "RPM", 0, 15000, 200, 500, 6000, 6000, 0, 0
|
||||
gaugeCategory = Sensors - Basic
|
||||
RPMGauge = RPMValue, "RPM - engine speed", "RPM", 0, 15000, 200, 500, 6000, 6000, 0, 0
|
||||
#if CELSIUS
|
||||
CLTGauge = coolant, "Coolant Temp", "deg C", -40, 140, -15, 1, 95, 110, 1, 1
|
||||
CLTGauge = coolant, "Coolant temp", "deg C", -40, 140, -15, 1, 95, 110, 1, 1
|
||||
#else
|
||||
CLTGauge = coolant, "Coolant Temp", "deg F", -40, 285, 5, 35, 205, 230, 1, 1
|
||||
CLTGauge = coolant, "Coolant temp", "deg F", -40, 285, 5, 35, 205, 230, 1, 1
|
||||
#endif
|
||||
#if CELSIUS
|
||||
IATGauge = intake, "Intake Air Temp", "deg C", -40, 140, -15, 1, 95, 110, 1, 1
|
||||
IATGauge = intake, "Intake air temp", "deg C", -40, 140, -15, 1, 95, 110, 1, 1
|
||||
#else
|
||||
IATGauge = intake, "Intake Air Temp", "deg F", -40, 285, 5, 35, 205, 230, 1, 1
|
||||
IATGauge = intake, "Intake air temp", "deg F", -40, 285, 5, 35, 205, 230, 1, 1
|
||||
#endif
|
||||
TPSGauge = TPSValue, "Throttle Position", "%", 0, 100, 0, 0, 100, 100, 2, 2
|
||||
afr1Gauge = AFRValue, "Air:Fuel Ratio 1", "", 10, 19.4, 12, 13, 15, 16, 2, 2
|
||||
MAFGauge = MAFValue, "Mass Air Flow", "v", 0, 5, 0, 1, 3, 4, 1, 1
|
||||
VBattGauge = VBatt, "Battery Voltage", "V", 8, 21, 9, 10, 17, 19, 1, 1
|
||||
afr1Gauge = AFRValue, "Air fuel ratio", "", 10, 19.4, 12, 13, 15, 16, 2, 2
|
||||
MAFGauge = MAFValue, "Mass air flow", "v", 0, 5, 0, 1, 3, 4, 1, 1
|
||||
VBattGauge = VBatt, "Battery voltage", "V", 8, 21, 9, 10, 17, 19, 1, 1
|
||||
MAPGauge = MAPValue, "MAP", "kPa", 0, 300, 10, 10, 200, 200, 0, 0
|
||||
tpsADCGauge = tpsADC1, "tps1 ADC", "ADC", 0, 1024, 0, 0, 0, 0, 0, 0
|
||||
massAirFlowValueGa = massAirFlowValue,"Mass air flow", "kg/hr", 0, 50, -999, -999, 999, 999, 1, 1
|
||||
|
||||
|
||||
gaugeCategory = Sensors2
|
||||
VSSGauge = vehicleSpeedKph, "Speed", "kmh", 0, 200, 0, 1, 3, 4, 1, 1
|
||||
pedalPositionGauge = pedalPosition,"Throttle Pedal Position", "%", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
gaugeCategory = Sensors - Extra 1
|
||||
VSSGauge = vehicleSpeedKph, "Vehicle speed", "kmh", 0, 200, 0, 1, 3, 4, 1, 1
|
||||
accelerationXGauge = accelerationX, "Acceleration: X", "acc", -11, 11, 1.0, 1.2, 100, 100, 3, 1
|
||||
accelerationYGauge = accelerationY, "Acceleration: Y", "acc", -11, 11, 1.0, 1.2, 100, 100, 3, 1
|
||||
atmPresCGauge = baroPressure, "Baro", "kPa", 0, 1024, 0, 0, 0, 0, 0, 0
|
||||
atmPresCGauge = baroPressure, "Barometric pressure", "kPa", 0, 1024, 0, 0, 0, 0, 0, 0
|
||||
vvtPositionGauge = vvtPosition, "VVT position", "deg", 0, 100, 0, 0, 720, 720, 0, 0
|
||||
internalMcuTemperatureGauge = internalMcuTemperature, "ECU temperature", "C", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
internalMcuTemperatureGauge = internalMcuTemperature, "ECU temperature", "C", 0, 100, 0, 0, 75, 100, 0, 0
|
||||
OilPressGauge = oilPressure, "Oil Pressure", "kPa", 0, 750, 35, 75, 550, 700, 0, 0
|
||||
fuelConsumptionPerHourGauge=fuelConsumptionPerHour, "f","kPa", 0, 750, 35, 75, 550, 700, 0, 0
|
||||
idleAirValvePositionGauge = idleAirValvePosition, "idle position", "%", 0, 100, 0, 0, 100, 100, 1, 1
|
||||
idleAirValvePositionGauge = idleAirValvePosition, "Idle position", "%", 0, 100, 0, 0, 100, 100, 1, 1
|
||||
|
||||
gaugeCategory = Spark Data
|
||||
ignadvGauge = ignitionAdvance, "Ignition Advance 1", "degrees", -100, 100, -999, -999, 999, 999, 1, 1
|
||||
gaugeCategory = Ignition
|
||||
ignadvGauge = ignitionAdvance, "Ignition timing", "degrees", -100, 100, -999, -999, 999, 999, 1, 1
|
||||
dwellGauge = sparkDwellValue, "Dwell", "mSec", 0, 10, 0.5, 1.0, 6.0, 8.0, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "dwell: coil duty cycle", "perc", -11, 11, 1.0, 1.2, 100, 100, 3, 1
|
||||
|
||||
gaugeCategory = Accel Data
|
||||
engineLoadDeltaGauge = engineLoadDelta,"fuel: load change","value", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
engineLoadAccelExtraGauge = engineLoadAccelExtra,"fuel: load extra","value", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
deltaTpsGauge = deltaTps, "fuel: TPS change", "", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
tpsAccelFuelGauge = tpsAccelFuel,"fuel: TPS enrich", "ms", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
wallFuelAmountGauge = wallFuelAmount, "fuel: wall amount", "ms", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
wallFuelCorrectionGauge = wallFuelCorrection, "fuel: wall correction extra", "ms", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
gaugeCategory = Acceleration Enrichment
|
||||
engineLoadDeltaGauge = engineLoadDelta,"AE: load change","value", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
engineLoadAccelExtraGauge = engineLoadAccelExtra,"AE: load extra","value", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
deltaTpsGauge = deltaTps, "AE: TPS change", "", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
tpsAccelFuelGauge = tpsAccelFuel,"AE: TPS enrich", "ms", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
wallFuelAmountGauge = wallFuelAmount, "AE: wall amount", "ms", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
wallFuelCorrectionGauge = wallFuelCorrection, "AE: wall correction extra", "ms", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
|
||||
|
||||
gaugeCategory = Fuel Data
|
||||
gaugeCategory = Fueling
|
||||
;Name Var Title Units Lo Hi LoD LoW HiW HiD vd ld
|
||||
#if CELSIUS
|
||||
tChargeGauge = tCharge, "fuel: charge T", "deg C", -40, 140, -15, 1, 95, 110, 1, 1
|
||||
tChargeGauge = tCharge, "fuel: Estimated charge temperature", "deg C", -40, 140, -15, 1, 95, 110, 1, 1
|
||||
#else
|
||||
tChargeGauge = tCharge, "fuel: charge T", "deg F", -40, 285, 5, 35, 205, 230, 1, 1
|
||||
tChargeGauge = tCharge, "fuel: Estimated charge temperature", "deg F", -40, 285, 5, 35, 205, 230, 1, 1
|
||||
#endif
|
||||
baroCorrectionGauge = baroCorrection,"BaroCorr", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1
|
||||
baroCorrectionGauge = baroCorrection,"Fuel: Barometric pressure correction", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1
|
||||
crankingFuelGauge = crankingFuelMs, "fuel: cranking", "mSec", 0, 25.5, 1.0, 1.2, 20, 25, 3, 1
|
||||
iatCorrectionGauge = iatCorrection, "fuel: IAT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2
|
||||
cltCorrectionGauge = cltCorrection, "fuel: CLT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2
|
||||
injectorDutyCycleGauge=injectorDutyCycle, "fuel: injector duty cycle","%", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
actualLastInjectionGauge = actualLastInjection, "fuel: last injection", "mSec", 0, 25.5, 1.0, 1.2, 20, 25, 3, 1
|
||||
actualLastInjectionGauge = actualLastInjection, "fuel: Last injection", "mSec", 0, 25.5, 1.0, 1.2, 20, 25, 3, 1
|
||||
veValueGauge = veValue, "fuel: VE", "", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
|
||||
injectorLagMsGauge = injectorLagMs, "fuel: injector lag", "mSec", 0, 25.5, 1.0, 1.2, 20, 25, 3, 1
|
||||
fuelRunningGauge = fuelRunning, "fuel: running", "mSec", 0, 25.5, 1.0, 1.2, 20, 25, 3, 1
|
||||
baseFuelGauge = baseFuel, "fuel: base", "mSec", 0, 25.5, 1.0, 1.2, 20, 25, 3, 1
|
||||
fuelPidCorrectionGauge = fuelPidCorrection, "fuel: short correction", "mSec", -11, 11, 1.0, 1.2, 20, 25, 3, 1
|
||||
|
||||
fuelPidCorrectionGauge = fuelPidCorrection, "fuel: Short-term closed loop correction", "mSec", -11, 11, 1.0, 1.2, 20, 25, 3, 1
|
||||
|
||||
gaugeCategory = Throttle Body (incl. ETB)
|
||||
pedalPositionGauge = pedalPosition, "Throttle pedal position", "%", 0, 120, 0, 0, 100, 100, 1, 1
|
||||
tpsADCGauge = tpsADC1, "tps1 ADC", "ADC", 0, 1024, 0, 0, 0, 0, 0, 0
|
||||
TPSGauge = TPSValue, "Throttle position", "%", 0, 100, 0, 0, 100, 100, 1, 1
|
||||
|
||||
etbTargetGauge = etbTarget, "ETB position target", "%", 0, 100, 0, 0, 100, 100, 1, 1
|
||||
etbErrorGauge = etb1Error, "ETB position error", "%", -20, 20, -10, -5, 5, 10, 2, 0
|
||||
etbDutyCycleGauge = etb1DutyCycle, "ETB duty cycle", "%", -100, 100, -75, -50, 50, 75, 0, 0
|
||||
|
||||
|
||||
[WueAnalyze]
|
||||
|
||||
|
|
@ -1937,9 +1941,9 @@ gaugeCategory = Fuel Data
|
|||
|
||||
entry = injectorLagMs, "fuel: injector lag", float, "%.3f"
|
||||
entry = fuelRunning, "fuel: running", float, "%.3f"
|
||||
entry = actualLastInjection, "fuel: last injection", float, "%.3f"
|
||||
entry = actualLastInjection, "fuel: Last injection", float, "%.3f"
|
||||
entry = baseFuel, "fuel: base", float, "%.2f"
|
||||
entry = fuelPidCorrection,"fuel: short correction", float, "%.2f"
|
||||
entry = fuelPidCorrection,"fuel: Short-term closed loop correction", float, "%.2f"
|
||||
entry = veValue, "fuel: VE", float, "%.3f"
|
||||
entry = injectorDutyCycle,"fuel: injector duty cycle",float,"%.3f"
|
||||
entry = coilDutyCycle, "dwell: coil duty cycle", float,"%.3f"
|
||||
|
|
@ -2520,6 +2524,8 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
|
||||
dialog = pedalSensor, "Accelerator pedal"
|
||||
field = "Accelerator position sensor", throttlePedalPositionAdcChannel
|
||||
field = "Up voltage", throttlePedalUpVoltage
|
||||
field = "Down (WOT) voltage", throttlePedalWOTVoltage
|
||||
|
||||
; Sensor Inputs
|
||||
dialog = otherSensorInputs, "Other Sensor Inputs"
|
||||
|
|
@ -3422,14 +3428,11 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "No2 Direction #2", etb2_directionPin2, {throttlePedalPositionAdcChannel != 16}
|
||||
field = "Two-wire mode", etb2_use_two_wires, {throttlePedalPositionAdcChannel != 16}
|
||||
field = "No2 Control #1", etb2_controlPin1, {throttlePedalPositionAdcChannel != 16 && etb2_use_two_wires == 0}
|
||||
field = "etbDeadband", etbDeadband, {throttlePedalPositionAdcChannel != 16}
|
||||
panel = etbPidDialog
|
||||
|
||||
dialog = etbDialogRight
|
||||
field = "!https://rusefi.com/s/debugmode"
|
||||
field = "Debug mode", debugMode
|
||||
field = "TPS1", tpsADC
|
||||
field = "Pedal", throttlePedalPositionAdcChannel
|
||||
field = "use ETB for idle", useETBforIdleControl
|
||||
field = "ETB idle maximum angle", etbIdleRange
|
||||
field = "Press buttons to calibrate sensors"
|
||||
|
|
|
|||
|
|
@ -82,7 +82,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Tue Jun 25 02:03:15 EDT 2019
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Wed Jun 26 19:24:53 EDT 2019
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -886,7 +886,7 @@ page = 1
|
|||
;no TS info - skipping unusedSpiPadding7 offset 4029
|
||||
mc33972spiDevice = bits,U32, 4032, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4"
|
||||
;no TS info - skipping unusedSpiPadding8 offset 4033
|
||||
;no TS info - skipping etbIdleThrottleRange offset 4036
|
||||
etbIdleThrottleRange = scalar, F32, 4036, "%", 1, 0, 0, 15, 0
|
||||
;no TS info - skipping mainUnusedEnd offset 4040
|
||||
pedalToTpsTable = array, U08, 6400, [8x8],"deg", 1, 0, -720, 720, 2
|
||||
pedalToTpsPedalBins = array, U08, 6464, [8], "%", 1, 0, 0.0, 120.0, 0
|
||||
|
|
@ -1248,20 +1248,23 @@ fileVersion = { 20171101 }
|
|||
fuelPidCorrection = scalar, F32, 268, "ms", 1, 0
|
||||
coilDutyCycle = scalar, F32, 272, "perc", 1, 0
|
||||
accelerationX = scalar, S16, 276, "G", 0.01, 0
|
||||
accelerationY = scalar, S16, 276, "G", 0.01, 0
|
||||
accelerationY = scalar, S16, 278, "G", 0.01, 0
|
||||
oilPressure = scalar, F32, 280, "kPa", 1, 0.0
|
||||
fuelConsumptionPerHour=scalar, F32, 284, "kPa", 1, 0.0
|
||||
injectionOffset = scalar, F32, 288, "deg", 1, 0;
|
||||
debugIntField4 = scalar, S16, 292, "val", 1, 0.0;
|
||||
debugIntField5 = scalar, S16, 294, "val", 1, 0.0;
|
||||
recentErrorCode0 = scalar,U16, 298, "error", 1, 0
|
||||
recentErrorCode1 = scalar,U16, 300, "error", 1, 0
|
||||
recentErrorCode2 = scalar,U16, 302, "error", 1, 0
|
||||
recentErrorCode3 = scalar,U16, 304, "error", 1, 0
|
||||
recentErrorCode4 = scalar,U16, 306, "error", 1, 0
|
||||
recentErrorCode5 = scalar,U16, 308, "error", 1, 0
|
||||
recentErrorCode6 = scalar,U16, 310, "error", 1, 0
|
||||
recentErrorCode7 = scalar,U16, 312, "error", 1, 0
|
||||
recentErrorCode0 = scalar,U16, 296, "error", 1, 0
|
||||
recentErrorCode1 = scalar,U16, 298, "error", 1, 0
|
||||
recentErrorCode2 = scalar,U16, 300, "error", 1, 0
|
||||
recentErrorCode3 = scalar,U16, 302, "error", 1, 0
|
||||
recentErrorCode4 = scalar,U16, 304, "error", 1, 0
|
||||
recentErrorCode5 = scalar,U16, 306, "error", 1, 0
|
||||
recentErrorCode6 = scalar,U16, 308, "error", 1, 0
|
||||
recentErrorCode7 = scalar,U16, 310, "error", 1, 0
|
||||
etbTarget = scalar,F32, 312, "%", 1, 0
|
||||
etb1DutyCycle = scalar,F32, 316, "%", 1, 0
|
||||
etb1Error = scalar,F32, 320, "%", 1, 0
|
||||
|
||||
|
||||
;
|
||||
|
|
@ -1716,9 +1719,7 @@ fileVersion = { 20171101 }
|
|||
|
||||
[GaugeConfigurations]
|
||||
|
||||
|
||||
; warmupEnrichGauge = warmupEnrich, "Warmup Enrichment", "%", 100, 150, -1, -1, 101, 105, 0, 0
|
||||
; accelEnrichGauge = accDecEnrich, "Accel Enrich", "%", 50, 150, -1, -1, 999, 999, 0, 0
|
||||
gaugeCategory = Sensors - Extra 2
|
||||
egt1Gauge = egt1, "EGT#1", "C", 0, 2000
|
||||
egt2Gauge = egt2, "EGT#2", "C", 0, 2000
|
||||
egt3Gauge = egt3, "EGT#3", "C", 0, 2000
|
||||
|
|
@ -1728,19 +1729,15 @@ fileVersion = { 20171101 }
|
|||
egt7Gauge = egt7, "EGT#7", "C", 0, 2000
|
||||
egt8Gauge = egt8, "EGT#8", "C", 0, 2000
|
||||
rpmAccelerationGa = rpmAcceleration, "rpm delta", "dRpm", 0, 3, 0, 1, 3, 4, 1, 1
|
||||
massAirFlowValueGa = massAirFlowValue,"Air Flow", "kg/hr", 0, 50, -999, -999, 999, 999, 1, 1
|
||||
knockCountGauge = knockCount,"Knock count", "count", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
knockLevelGauge = knockLevel,"Knock level", "volts", 0, 7, 10, 10, 100, 100, 1, 2
|
||||
fuelTankLevelGauge = fuelTankLevel,"Fuel", "x", 0, 7, 10, 10, 100, 100, 1, 2
|
||||
|
||||
|
||||
|
||||
fuelTankLevelGauge = fuelTankLevel,"Fuel level", "x", 0, 7, 10, 10, 100, 100, 1, 2
|
||||
speedToRpmRatioGauge = speedToRpmRatio, "speed2rpm", "", 0, 100, 0, 0, 100, 100, 4, 4
|
||||
|
||||
gaugeCategory = Status
|
||||
warningCounterGauge = warningCounter, "Counter", "", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
lastErrorCodeGauge = lastErrorCode, "Latest Error", "", 0, 18000, 0, 0, 18000, 18000, 0, 0
|
||||
triggerErrorsCounterGauge = triggerErrorsCounter, "trg err", "count", 0, 15000, 0, 0, 6000, 6000, 0, 0
|
||||
gaugeCategory = ECU Status
|
||||
warningCounterGauge = warningCounter, "Warning count", "", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
lastErrorCodeGauge = lastErrorCode, "Last error", "", 0, 18000, 0, 0, 18000, 18000, 0, 0
|
||||
triggerErrorsCounterGauge = triggerErrorsCounter, "Trigger error count", "count", 0, 15000, 0, 0, 6000, 6000, 0, 0
|
||||
recentErrorCode0Gauge = recentErrorCode0, "Error#1", "", 0, 18000, 0, 0, 18000, 18000, 0, 0
|
||||
recentErrorCode1Gauge = recentErrorCode1, "Error#2", "", 0, 18000, 0, 0, 18000, 18000, 0, 0
|
||||
recentErrorCode2Gauge = recentErrorCode2, "Error#3", "", 0, 18000, 0, 0, 18000, 18000, 0, 0
|
||||
|
|
@ -1749,8 +1746,9 @@ gaugeCategory = Status
|
|||
recentErrorCode5Gauge = recentErrorCode5, "Error#6", "", 0, 18000, 0, 0, 18000, 18000, 0, 0
|
||||
recentErrorCode6Gauge = recentErrorCode6, "Error#7", "", 0, 18000, 0, 0, 18000, 18000, 0, 0
|
||||
recentErrorCode7Gauge = recentErrorCode7, "Error#8", "", 0, 18000, 0, 0, 18000, 18000, 0, 0
|
||||
firmwareVersionGauge = firmwareVersion , "version", "%", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
|
||||
firmwareVersionGauge = firmwareVersion , "ECU Software Version", "%", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
timeSecondsGauge = timeSeconds, "Uptime", "sec", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
|
||||
gaugeCategory = Debug
|
||||
debugFloatField1Gauge = debugFloatField1, "debug f1", "%", 0, 100, 0, 0, 100, 100, 4, 4
|
||||
debugFloatField2Gauge = debugFloatField2, "debug f2: iTerm", "%", -100, 100, 0, 0, 100, 100, 4, 4
|
||||
|
|
@ -1764,73 +1762,79 @@ gaugeCategory = Debug
|
|||
debugIntField3Gauge = debugIntField3, "debug i3", "%", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
debugIntField4Gauge = debugIntField4, "debug i4", "%", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
debugIntField5Gauge = debugIntField5, "debug i5", "%", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
timeSecondsGauge = timeSeconds, "Uptime", "sec", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
|
||||
|
||||
gaugeCategory = Sensors
|
||||
RPMGauge = RPMValue, "Engine Speed", "RPM", 0, 15000, 200, 500, 6000, 6000, 0, 0
|
||||
gaugeCategory = Sensors - Basic
|
||||
RPMGauge = RPMValue, "RPM - engine speed", "RPM", 0, 15000, 200, 500, 6000, 6000, 0, 0
|
||||
#if CELSIUS
|
||||
CLTGauge = coolant, "Coolant Temp", "deg C", -40, 140, -15, 1, 95, 110, 1, 1
|
||||
CLTGauge = coolant, "Coolant temp", "deg C", -40, 140, -15, 1, 95, 110, 1, 1
|
||||
#else
|
||||
CLTGauge = coolant, "Coolant Temp", "deg F", -40, 285, 5, 35, 205, 230, 1, 1
|
||||
CLTGauge = coolant, "Coolant temp", "deg F", -40, 285, 5, 35, 205, 230, 1, 1
|
||||
#endif
|
||||
#if CELSIUS
|
||||
IATGauge = intake, "Intake Air Temp", "deg C", -40, 140, -15, 1, 95, 110, 1, 1
|
||||
IATGauge = intake, "Intake air temp", "deg C", -40, 140, -15, 1, 95, 110, 1, 1
|
||||
#else
|
||||
IATGauge = intake, "Intake Air Temp", "deg F", -40, 285, 5, 35, 205, 230, 1, 1
|
||||
IATGauge = intake, "Intake air temp", "deg F", -40, 285, 5, 35, 205, 230, 1, 1
|
||||
#endif
|
||||
TPSGauge = TPSValue, "Throttle Position", "%", 0, 100, 0, 0, 100, 100, 2, 2
|
||||
afr1Gauge = AFRValue, "Air:Fuel Ratio 1", "", 10, 19.4, 12, 13, 15, 16, 2, 2
|
||||
MAFGauge = MAFValue, "Mass Air Flow", "v", 0, 5, 0, 1, 3, 4, 1, 1
|
||||
VBattGauge = VBatt, "Battery Voltage", "V", 8, 21, 9, 10, 17, 19, 1, 1
|
||||
afr1Gauge = AFRValue, "Air fuel ratio", "", 10, 19.4, 12, 13, 15, 16, 2, 2
|
||||
MAFGauge = MAFValue, "Mass air flow", "v", 0, 5, 0, 1, 3, 4, 1, 1
|
||||
VBattGauge = VBatt, "Battery voltage", "V", 8, 21, 9, 10, 17, 19, 1, 1
|
||||
MAPGauge = MAPValue, "MAP", "kPa", 0, 300, 10, 10, 200, 200, 0, 0
|
||||
tpsADCGauge = tpsADC1, "tps1 ADC", "ADC", 0, 1024, 0, 0, 0, 0, 0, 0
|
||||
massAirFlowValueGa = massAirFlowValue,"Mass air flow", "kg/hr", 0, 50, -999, -999, 999, 999, 1, 1
|
||||
|
||||
|
||||
gaugeCategory = Sensors2
|
||||
VSSGauge = vehicleSpeedKph, "Speed", "kmh", 0, 200, 0, 1, 3, 4, 1, 1
|
||||
pedalPositionGauge = pedalPosition,"Throttle Pedal Position", "%", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
gaugeCategory = Sensors - Extra 1
|
||||
VSSGauge = vehicleSpeedKph, "Vehicle speed", "kmh", 0, 200, 0, 1, 3, 4, 1, 1
|
||||
accelerationXGauge = accelerationX, "Acceleration: X", "acc", -11, 11, 1.0, 1.2, 100, 100, 3, 1
|
||||
accelerationYGauge = accelerationY, "Acceleration: Y", "acc", -11, 11, 1.0, 1.2, 100, 100, 3, 1
|
||||
atmPresCGauge = baroPressure, "Baro", "kPa", 0, 1024, 0, 0, 0, 0, 0, 0
|
||||
atmPresCGauge = baroPressure, "Barometric pressure", "kPa", 0, 1024, 0, 0, 0, 0, 0, 0
|
||||
vvtPositionGauge = vvtPosition, "VVT position", "deg", 0, 100, 0, 0, 720, 720, 0, 0
|
||||
internalMcuTemperatureGauge = internalMcuTemperature, "ECU temperature", "C", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
internalMcuTemperatureGauge = internalMcuTemperature, "ECU temperature", "C", 0, 100, 0, 0, 75, 100, 0, 0
|
||||
OilPressGauge = oilPressure, "Oil Pressure", "kPa", 0, 750, 35, 75, 550, 700, 0, 0
|
||||
fuelConsumptionPerHourGauge=fuelConsumptionPerHour, "f","kPa", 0, 750, 35, 75, 550, 700, 0, 0
|
||||
idleAirValvePositionGauge = idleAirValvePosition, "idle position", "%", 0, 100, 0, 0, 100, 100, 1, 1
|
||||
idleAirValvePositionGauge = idleAirValvePosition, "Idle position", "%", 0, 100, 0, 0, 100, 100, 1, 1
|
||||
|
||||
gaugeCategory = Spark Data
|
||||
ignadvGauge = ignitionAdvance, "Ignition Advance 1", "degrees", -100, 100, -999, -999, 999, 999, 1, 1
|
||||
gaugeCategory = Ignition
|
||||
ignadvGauge = ignitionAdvance, "Ignition timing", "degrees", -100, 100, -999, -999, 999, 999, 1, 1
|
||||
dwellGauge = sparkDwellValue, "Dwell", "mSec", 0, 10, 0.5, 1.0, 6.0, 8.0, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "dwell: coil duty cycle", "perc", -11, 11, 1.0, 1.2, 100, 100, 3, 1
|
||||
|
||||
gaugeCategory = Accel Data
|
||||
engineLoadDeltaGauge = engineLoadDelta,"fuel: load change","value", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
engineLoadAccelExtraGauge = engineLoadAccelExtra,"fuel: load extra","value", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
deltaTpsGauge = deltaTps, "fuel: TPS change", "", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
tpsAccelFuelGauge = tpsAccelFuel,"fuel: TPS enrich", "ms", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
wallFuelAmountGauge = wallFuelAmount, "fuel: wall amount", "ms", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
wallFuelCorrectionGauge = wallFuelCorrection, "fuel: wall correction extra", "ms", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
gaugeCategory = Acceleration Enrichment
|
||||
engineLoadDeltaGauge = engineLoadDelta,"AE: load change","value", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
engineLoadAccelExtraGauge = engineLoadAccelExtra,"AE: load extra","value", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
deltaTpsGauge = deltaTps, "AE: TPS change", "", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
tpsAccelFuelGauge = tpsAccelFuel,"AE: TPS enrich", "ms", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
wallFuelAmountGauge = wallFuelAmount, "AE: wall amount", "ms", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
wallFuelCorrectionGauge = wallFuelCorrection, "AE: wall correction extra", "ms", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
|
||||
|
||||
gaugeCategory = Fuel Data
|
||||
gaugeCategory = Fueling
|
||||
;Name Var Title Units Lo Hi LoD LoW HiW HiD vd ld
|
||||
#if CELSIUS
|
||||
tChargeGauge = tCharge, "fuel: charge T", "deg C", -40, 140, -15, 1, 95, 110, 1, 1
|
||||
tChargeGauge = tCharge, "fuel: Estimated charge temperature", "deg C", -40, 140, -15, 1, 95, 110, 1, 1
|
||||
#else
|
||||
tChargeGauge = tCharge, "fuel: charge T", "deg F", -40, 285, 5, 35, 205, 230, 1, 1
|
||||
tChargeGauge = tCharge, "fuel: Estimated charge temperature", "deg F", -40, 285, 5, 35, 205, 230, 1, 1
|
||||
#endif
|
||||
baroCorrectionGauge = baroCorrection,"BaroCorr", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1
|
||||
baroCorrectionGauge = baroCorrection,"Fuel: Barometric pressure correction", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1
|
||||
crankingFuelGauge = crankingFuelMs, "fuel: cranking", "mSec", 0, 25.5, 1.0, 1.2, 20, 25, 3, 1
|
||||
iatCorrectionGauge = iatCorrection, "fuel: IAT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2
|
||||
cltCorrectionGauge = cltCorrection, "fuel: CLT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2
|
||||
injectorDutyCycleGauge=injectorDutyCycle, "fuel: injector duty cycle","%", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
actualLastInjectionGauge = actualLastInjection, "fuel: last injection", "mSec", 0, 25.5, 1.0, 1.2, 20, 25, 3, 1
|
||||
actualLastInjectionGauge = actualLastInjection, "fuel: Last injection", "mSec", 0, 25.5, 1.0, 1.2, 20, 25, 3, 1
|
||||
veValueGauge = veValue, "fuel: VE", "", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
|
||||
injectorLagMsGauge = injectorLagMs, "fuel: injector lag", "mSec", 0, 25.5, 1.0, 1.2, 20, 25, 3, 1
|
||||
fuelRunningGauge = fuelRunning, "fuel: running", "mSec", 0, 25.5, 1.0, 1.2, 20, 25, 3, 1
|
||||
baseFuelGauge = baseFuel, "fuel: base", "mSec", 0, 25.5, 1.0, 1.2, 20, 25, 3, 1
|
||||
fuelPidCorrectionGauge = fuelPidCorrection, "fuel: short correction", "mSec", -11, 11, 1.0, 1.2, 20, 25, 3, 1
|
||||
|
||||
fuelPidCorrectionGauge = fuelPidCorrection, "fuel: Short-term closed loop correction", "mSec", -11, 11, 1.0, 1.2, 20, 25, 3, 1
|
||||
|
||||
gaugeCategory = Throttle Body (incl. ETB)
|
||||
pedalPositionGauge = pedalPosition, "Throttle pedal position", "%", 0, 120, 0, 0, 100, 100, 1, 1
|
||||
tpsADCGauge = tpsADC1, "tps1 ADC", "ADC", 0, 1024, 0, 0, 0, 0, 0, 0
|
||||
TPSGauge = TPSValue, "Throttle position", "%", 0, 100, 0, 0, 100, 100, 1, 1
|
||||
|
||||
etbTargetGauge = etbTarget, "ETB position target", "%", 0, 100, 0, 0, 100, 100, 1, 1
|
||||
etbErrorGauge = etb1Error, "ETB position error", "%", -20, 20, -10, -5, 5, 10, 2, 0
|
||||
etbDutyCycleGauge = etb1DutyCycle, "ETB duty cycle", "%", -100, 100, -75, -50, 50, 75, 0, 0
|
||||
|
||||
|
||||
[WueAnalyze]
|
||||
|
||||
|
|
@ -1937,9 +1941,9 @@ gaugeCategory = Fuel Data
|
|||
|
||||
entry = injectorLagMs, "fuel: injector lag", float, "%.3f"
|
||||
entry = fuelRunning, "fuel: running", float, "%.3f"
|
||||
entry = actualLastInjection, "fuel: last injection", float, "%.3f"
|
||||
entry = actualLastInjection, "fuel: Last injection", float, "%.3f"
|
||||
entry = baseFuel, "fuel: base", float, "%.2f"
|
||||
entry = fuelPidCorrection,"fuel: short correction", float, "%.2f"
|
||||
entry = fuelPidCorrection,"fuel: Short-term closed loop correction", float, "%.2f"
|
||||
entry = veValue, "fuel: VE", float, "%.3f"
|
||||
entry = injectorDutyCycle,"fuel: injector duty cycle",float,"%.3f"
|
||||
entry = coilDutyCycle, "dwell: coil duty cycle", float,"%.3f"
|
||||
|
|
@ -2520,6 +2524,8 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
|
||||
dialog = pedalSensor, "Accelerator pedal"
|
||||
field = "Accelerator position sensor", throttlePedalPositionAdcChannel
|
||||
field = "Up voltage", throttlePedalUpVoltage
|
||||
field = "Down (WOT) voltage", throttlePedalWOTVoltage
|
||||
|
||||
; Sensor Inputs
|
||||
dialog = otherSensorInputs, "Other Sensor Inputs"
|
||||
|
|
@ -3422,14 +3428,11 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "No2 Direction #2", etb2_directionPin2, {throttlePedalPositionAdcChannel != 16}
|
||||
field = "Two-wire mode", etb2_use_two_wires, {throttlePedalPositionAdcChannel != 16}
|
||||
field = "No2 Control #1", etb2_controlPin1, {throttlePedalPositionAdcChannel != 16 && etb2_use_two_wires == 0}
|
||||
field = "etbDeadband", etbDeadband, {throttlePedalPositionAdcChannel != 16}
|
||||
panel = etbPidDialog
|
||||
|
||||
dialog = etbDialogRight
|
||||
field = "!https://rusefi.com/s/debugmode"
|
||||
field = "Debug mode", debugMode
|
||||
field = "TPS1", tpsADC
|
||||
field = "Pedal", throttlePedalPositionAdcChannel
|
||||
field = "use ETB for idle", useETBforIdleControl
|
||||
field = "ETB idle maximum angle", etbIdleRange
|
||||
field = "Press buttons to calibrate sensors"
|
||||
|
|
|
|||
|
|
@ -82,7 +82,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Tue Jun 25 02:03:12 EDT 2019
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Wed Jun 26 19:24:50 EDT 2019
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -886,7 +886,7 @@ page = 1
|
|||
;no TS info - skipping unusedSpiPadding7 offset 4029
|
||||
mc33972spiDevice = bits,U32, 4032, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4"
|
||||
;no TS info - skipping unusedSpiPadding8 offset 4033
|
||||
;no TS info - skipping etbIdleThrottleRange offset 4036
|
||||
etbIdleThrottleRange = scalar, F32, 4036, "%", 1, 0, 0, 15, 0
|
||||
;no TS info - skipping mainUnusedEnd offset 4040
|
||||
pedalToTpsTable = array, U08, 6400, [8x8],"deg", 1, 0, -720, 720, 2
|
||||
pedalToTpsPedalBins = array, U08, 6464, [8], "%", 1, 0, 0.0, 120.0, 0
|
||||
|
|
@ -1248,20 +1248,23 @@ fileVersion = { 20171101 }
|
|||
fuelPidCorrection = scalar, F32, 268, "ms", 1, 0
|
||||
coilDutyCycle = scalar, F32, 272, "perc", 1, 0
|
||||
accelerationX = scalar, S16, 276, "G", 0.01, 0
|
||||
accelerationY = scalar, S16, 276, "G", 0.01, 0
|
||||
accelerationY = scalar, S16, 278, "G", 0.01, 0
|
||||
oilPressure = scalar, F32, 280, "kPa", 1, 0.0
|
||||
fuelConsumptionPerHour=scalar, F32, 284, "kPa", 1, 0.0
|
||||
injectionOffset = scalar, F32, 288, "deg", 1, 0;
|
||||
debugIntField4 = scalar, S16, 292, "val", 1, 0.0;
|
||||
debugIntField5 = scalar, S16, 294, "val", 1, 0.0;
|
||||
recentErrorCode0 = scalar,U16, 298, "error", 1, 0
|
||||
recentErrorCode1 = scalar,U16, 300, "error", 1, 0
|
||||
recentErrorCode2 = scalar,U16, 302, "error", 1, 0
|
||||
recentErrorCode3 = scalar,U16, 304, "error", 1, 0
|
||||
recentErrorCode4 = scalar,U16, 306, "error", 1, 0
|
||||
recentErrorCode5 = scalar,U16, 308, "error", 1, 0
|
||||
recentErrorCode6 = scalar,U16, 310, "error", 1, 0
|
||||
recentErrorCode7 = scalar,U16, 312, "error", 1, 0
|
||||
recentErrorCode0 = scalar,U16, 296, "error", 1, 0
|
||||
recentErrorCode1 = scalar,U16, 298, "error", 1, 0
|
||||
recentErrorCode2 = scalar,U16, 300, "error", 1, 0
|
||||
recentErrorCode3 = scalar,U16, 302, "error", 1, 0
|
||||
recentErrorCode4 = scalar,U16, 304, "error", 1, 0
|
||||
recentErrorCode5 = scalar,U16, 306, "error", 1, 0
|
||||
recentErrorCode6 = scalar,U16, 308, "error", 1, 0
|
||||
recentErrorCode7 = scalar,U16, 310, "error", 1, 0
|
||||
etbTarget = scalar,F32, 312, "%", 1, 0
|
||||
etb1DutyCycle = scalar,F32, 316, "%", 1, 0
|
||||
etb1Error = scalar,F32, 320, "%", 1, 0
|
||||
|
||||
|
||||
;
|
||||
|
|
@ -1716,9 +1719,7 @@ fileVersion = { 20171101 }
|
|||
|
||||
[GaugeConfigurations]
|
||||
|
||||
|
||||
; warmupEnrichGauge = warmupEnrich, "Warmup Enrichment", "%", 100, 150, -1, -1, 101, 105, 0, 0
|
||||
; accelEnrichGauge = accDecEnrich, "Accel Enrich", "%", 50, 150, -1, -1, 999, 999, 0, 0
|
||||
gaugeCategory = Sensors - Extra 2
|
||||
egt1Gauge = egt1, "EGT#1", "C", 0, 2000
|
||||
egt2Gauge = egt2, "EGT#2", "C", 0, 2000
|
||||
egt3Gauge = egt3, "EGT#3", "C", 0, 2000
|
||||
|
|
@ -1728,19 +1729,15 @@ fileVersion = { 20171101 }
|
|||
egt7Gauge = egt7, "EGT#7", "C", 0, 2000
|
||||
egt8Gauge = egt8, "EGT#8", "C", 0, 2000
|
||||
rpmAccelerationGa = rpmAcceleration, "rpm delta", "dRpm", 0, 3, 0, 1, 3, 4, 1, 1
|
||||
massAirFlowValueGa = massAirFlowValue,"Air Flow", "kg/hr", 0, 50, -999, -999, 999, 999, 1, 1
|
||||
knockCountGauge = knockCount,"Knock count", "count", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
knockLevelGauge = knockLevel,"Knock level", "volts", 0, 7, 10, 10, 100, 100, 1, 2
|
||||
fuelTankLevelGauge = fuelTankLevel,"Fuel", "x", 0, 7, 10, 10, 100, 100, 1, 2
|
||||
|
||||
|
||||
|
||||
fuelTankLevelGauge = fuelTankLevel,"Fuel level", "x", 0, 7, 10, 10, 100, 100, 1, 2
|
||||
speedToRpmRatioGauge = speedToRpmRatio, "speed2rpm", "", 0, 100, 0, 0, 100, 100, 4, 4
|
||||
|
||||
gaugeCategory = Status
|
||||
warningCounterGauge = warningCounter, "Counter", "", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
lastErrorCodeGauge = lastErrorCode, "Latest Error", "", 0, 18000, 0, 0, 18000, 18000, 0, 0
|
||||
triggerErrorsCounterGauge = triggerErrorsCounter, "trg err", "count", 0, 15000, 0, 0, 6000, 6000, 0, 0
|
||||
gaugeCategory = ECU Status
|
||||
warningCounterGauge = warningCounter, "Warning count", "", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
lastErrorCodeGauge = lastErrorCode, "Last error", "", 0, 18000, 0, 0, 18000, 18000, 0, 0
|
||||
triggerErrorsCounterGauge = triggerErrorsCounter, "Trigger error count", "count", 0, 15000, 0, 0, 6000, 6000, 0, 0
|
||||
recentErrorCode0Gauge = recentErrorCode0, "Error#1", "", 0, 18000, 0, 0, 18000, 18000, 0, 0
|
||||
recentErrorCode1Gauge = recentErrorCode1, "Error#2", "", 0, 18000, 0, 0, 18000, 18000, 0, 0
|
||||
recentErrorCode2Gauge = recentErrorCode2, "Error#3", "", 0, 18000, 0, 0, 18000, 18000, 0, 0
|
||||
|
|
@ -1749,8 +1746,9 @@ gaugeCategory = Status
|
|||
recentErrorCode5Gauge = recentErrorCode5, "Error#6", "", 0, 18000, 0, 0, 18000, 18000, 0, 0
|
||||
recentErrorCode6Gauge = recentErrorCode6, "Error#7", "", 0, 18000, 0, 0, 18000, 18000, 0, 0
|
||||
recentErrorCode7Gauge = recentErrorCode7, "Error#8", "", 0, 18000, 0, 0, 18000, 18000, 0, 0
|
||||
firmwareVersionGauge = firmwareVersion , "version", "%", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
|
||||
firmwareVersionGauge = firmwareVersion , "ECU Software Version", "%", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
timeSecondsGauge = timeSeconds, "Uptime", "sec", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
|
||||
gaugeCategory = Debug
|
||||
debugFloatField1Gauge = debugFloatField1, "debug f1", "%", 0, 100, 0, 0, 100, 100, 4, 4
|
||||
debugFloatField2Gauge = debugFloatField2, "debug f2: iTerm", "%", -100, 100, 0, 0, 100, 100, 4, 4
|
||||
|
|
@ -1764,73 +1762,79 @@ gaugeCategory = Debug
|
|||
debugIntField3Gauge = debugIntField3, "debug i3", "%", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
debugIntField4Gauge = debugIntField4, "debug i4", "%", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
debugIntField5Gauge = debugIntField5, "debug i5", "%", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
timeSecondsGauge = timeSeconds, "Uptime", "sec", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
|
||||
|
||||
gaugeCategory = Sensors
|
||||
RPMGauge = RPMValue, "Engine Speed", "RPM", 0, 15000, 200, 500, 6000, 6000, 0, 0
|
||||
gaugeCategory = Sensors - Basic
|
||||
RPMGauge = RPMValue, "RPM - engine speed", "RPM", 0, 15000, 200, 500, 6000, 6000, 0, 0
|
||||
#if CELSIUS
|
||||
CLTGauge = coolant, "Coolant Temp", "deg C", -40, 140, -15, 1, 95, 110, 1, 1
|
||||
CLTGauge = coolant, "Coolant temp", "deg C", -40, 140, -15, 1, 95, 110, 1, 1
|
||||
#else
|
||||
CLTGauge = coolant, "Coolant Temp", "deg F", -40, 285, 5, 35, 205, 230, 1, 1
|
||||
CLTGauge = coolant, "Coolant temp", "deg F", -40, 285, 5, 35, 205, 230, 1, 1
|
||||
#endif
|
||||
#if CELSIUS
|
||||
IATGauge = intake, "Intake Air Temp", "deg C", -40, 140, -15, 1, 95, 110, 1, 1
|
||||
IATGauge = intake, "Intake air temp", "deg C", -40, 140, -15, 1, 95, 110, 1, 1
|
||||
#else
|
||||
IATGauge = intake, "Intake Air Temp", "deg F", -40, 285, 5, 35, 205, 230, 1, 1
|
||||
IATGauge = intake, "Intake air temp", "deg F", -40, 285, 5, 35, 205, 230, 1, 1
|
||||
#endif
|
||||
TPSGauge = TPSValue, "Throttle Position", "%", 0, 100, 0, 0, 100, 100, 2, 2
|
||||
afr1Gauge = AFRValue, "Air:Fuel Ratio 1", "", 10, 19.4, 12, 13, 15, 16, 2, 2
|
||||
MAFGauge = MAFValue, "Mass Air Flow", "v", 0, 5, 0, 1, 3, 4, 1, 1
|
||||
VBattGauge = VBatt, "Battery Voltage", "V", 8, 21, 9, 10, 17, 19, 1, 1
|
||||
afr1Gauge = AFRValue, "Air fuel ratio", "", 10, 19.4, 12, 13, 15, 16, 2, 2
|
||||
MAFGauge = MAFValue, "Mass air flow", "v", 0, 5, 0, 1, 3, 4, 1, 1
|
||||
VBattGauge = VBatt, "Battery voltage", "V", 8, 21, 9, 10, 17, 19, 1, 1
|
||||
MAPGauge = MAPValue, "MAP", "kPa", 0, 300, 10, 10, 200, 200, 0, 0
|
||||
tpsADCGauge = tpsADC1, "tps1 ADC", "ADC", 0, 1024, 0, 0, 0, 0, 0, 0
|
||||
massAirFlowValueGa = massAirFlowValue,"Mass air flow", "kg/hr", 0, 50, -999, -999, 999, 999, 1, 1
|
||||
|
||||
|
||||
gaugeCategory = Sensors2
|
||||
VSSGauge = vehicleSpeedKph, "Speed", "kmh", 0, 200, 0, 1, 3, 4, 1, 1
|
||||
pedalPositionGauge = pedalPosition,"Throttle Pedal Position", "%", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
gaugeCategory = Sensors - Extra 1
|
||||
VSSGauge = vehicleSpeedKph, "Vehicle speed", "kmh", 0, 200, 0, 1, 3, 4, 1, 1
|
||||
accelerationXGauge = accelerationX, "Acceleration: X", "acc", -11, 11, 1.0, 1.2, 100, 100, 3, 1
|
||||
accelerationYGauge = accelerationY, "Acceleration: Y", "acc", -11, 11, 1.0, 1.2, 100, 100, 3, 1
|
||||
atmPresCGauge = baroPressure, "Baro", "kPa", 0, 1024, 0, 0, 0, 0, 0, 0
|
||||
atmPresCGauge = baroPressure, "Barometric pressure", "kPa", 0, 1024, 0, 0, 0, 0, 0, 0
|
||||
vvtPositionGauge = vvtPosition, "VVT position", "deg", 0, 100, 0, 0, 720, 720, 0, 0
|
||||
internalMcuTemperatureGauge = internalMcuTemperature, "ECU temperature", "C", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
internalMcuTemperatureGauge = internalMcuTemperature, "ECU temperature", "C", 0, 100, 0, 0, 75, 100, 0, 0
|
||||
OilPressGauge = oilPressure, "Oil Pressure", "kPa", 0, 750, 35, 75, 550, 700, 0, 0
|
||||
fuelConsumptionPerHourGauge=fuelConsumptionPerHour, "f","kPa", 0, 750, 35, 75, 550, 700, 0, 0
|
||||
idleAirValvePositionGauge = idleAirValvePosition, "idle position", "%", 0, 100, 0, 0, 100, 100, 1, 1
|
||||
idleAirValvePositionGauge = idleAirValvePosition, "Idle position", "%", 0, 100, 0, 0, 100, 100, 1, 1
|
||||
|
||||
gaugeCategory = Spark Data
|
||||
ignadvGauge = ignitionAdvance, "Ignition Advance 1", "degrees", -100, 100, -999, -999, 999, 999, 1, 1
|
||||
gaugeCategory = Ignition
|
||||
ignadvGauge = ignitionAdvance, "Ignition timing", "degrees", -100, 100, -999, -999, 999, 999, 1, 1
|
||||
dwellGauge = sparkDwellValue, "Dwell", "mSec", 0, 10, 0.5, 1.0, 6.0, 8.0, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "dwell: coil duty cycle", "perc", -11, 11, 1.0, 1.2, 100, 100, 3, 1
|
||||
|
||||
gaugeCategory = Accel Data
|
||||
engineLoadDeltaGauge = engineLoadDelta,"fuel: load change","value", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
engineLoadAccelExtraGauge = engineLoadAccelExtra,"fuel: load extra","value", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
deltaTpsGauge = deltaTps, "fuel: TPS change", "", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
tpsAccelFuelGauge = tpsAccelFuel,"fuel: TPS enrich", "ms", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
wallFuelAmountGauge = wallFuelAmount, "fuel: wall amount", "ms", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
wallFuelCorrectionGauge = wallFuelCorrection, "fuel: wall correction extra", "ms", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
gaugeCategory = Acceleration Enrichment
|
||||
engineLoadDeltaGauge = engineLoadDelta,"AE: load change","value", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
engineLoadAccelExtraGauge = engineLoadAccelExtra,"AE: load extra","value", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
deltaTpsGauge = deltaTps, "AE: TPS change", "", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
tpsAccelFuelGauge = tpsAccelFuel,"AE: TPS enrich", "ms", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
wallFuelAmountGauge = wallFuelAmount, "AE: wall amount", "ms", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
wallFuelCorrectionGauge = wallFuelCorrection, "AE: wall correction extra", "ms", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
|
||||
|
||||
gaugeCategory = Fuel Data
|
||||
gaugeCategory = Fueling
|
||||
;Name Var Title Units Lo Hi LoD LoW HiW HiD vd ld
|
||||
#if CELSIUS
|
||||
tChargeGauge = tCharge, "fuel: charge T", "deg C", -40, 140, -15, 1, 95, 110, 1, 1
|
||||
tChargeGauge = tCharge, "fuel: Estimated charge temperature", "deg C", -40, 140, -15, 1, 95, 110, 1, 1
|
||||
#else
|
||||
tChargeGauge = tCharge, "fuel: charge T", "deg F", -40, 285, 5, 35, 205, 230, 1, 1
|
||||
tChargeGauge = tCharge, "fuel: Estimated charge temperature", "deg F", -40, 285, 5, 35, 205, 230, 1, 1
|
||||
#endif
|
||||
baroCorrectionGauge = baroCorrection,"BaroCorr", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1
|
||||
baroCorrectionGauge = baroCorrection,"Fuel: Barometric pressure correction", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1
|
||||
crankingFuelGauge = crankingFuelMs, "fuel: cranking", "mSec", 0, 25.5, 1.0, 1.2, 20, 25, 3, 1
|
||||
iatCorrectionGauge = iatCorrection, "fuel: IAT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2
|
||||
cltCorrectionGauge = cltCorrection, "fuel: CLT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2
|
||||
injectorDutyCycleGauge=injectorDutyCycle, "fuel: injector duty cycle","%", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
actualLastInjectionGauge = actualLastInjection, "fuel: last injection", "mSec", 0, 25.5, 1.0, 1.2, 20, 25, 3, 1
|
||||
actualLastInjectionGauge = actualLastInjection, "fuel: Last injection", "mSec", 0, 25.5, 1.0, 1.2, 20, 25, 3, 1
|
||||
veValueGauge = veValue, "fuel: VE", "", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
|
||||
injectorLagMsGauge = injectorLagMs, "fuel: injector lag", "mSec", 0, 25.5, 1.0, 1.2, 20, 25, 3, 1
|
||||
fuelRunningGauge = fuelRunning, "fuel: running", "mSec", 0, 25.5, 1.0, 1.2, 20, 25, 3, 1
|
||||
baseFuelGauge = baseFuel, "fuel: base", "mSec", 0, 25.5, 1.0, 1.2, 20, 25, 3, 1
|
||||
fuelPidCorrectionGauge = fuelPidCorrection, "fuel: short correction", "mSec", -11, 11, 1.0, 1.2, 20, 25, 3, 1
|
||||
|
||||
fuelPidCorrectionGauge = fuelPidCorrection, "fuel: Short-term closed loop correction", "mSec", -11, 11, 1.0, 1.2, 20, 25, 3, 1
|
||||
|
||||
gaugeCategory = Throttle Body (incl. ETB)
|
||||
pedalPositionGauge = pedalPosition, "Throttle pedal position", "%", 0, 120, 0, 0, 100, 100, 1, 1
|
||||
tpsADCGauge = tpsADC1, "tps1 ADC", "ADC", 0, 1024, 0, 0, 0, 0, 0, 0
|
||||
TPSGauge = TPSValue, "Throttle position", "%", 0, 100, 0, 0, 100, 100, 1, 1
|
||||
|
||||
etbTargetGauge = etbTarget, "ETB position target", "%", 0, 100, 0, 0, 100, 100, 1, 1
|
||||
etbErrorGauge = etb1Error, "ETB position error", "%", -20, 20, -10, -5, 5, 10, 2, 0
|
||||
etbDutyCycleGauge = etb1DutyCycle, "ETB duty cycle", "%", -100, 100, -75, -50, 50, 75, 0, 0
|
||||
|
||||
|
||||
[WueAnalyze]
|
||||
|
||||
|
|
@ -1937,9 +1941,9 @@ gaugeCategory = Fuel Data
|
|||
|
||||
entry = injectorLagMs, "fuel: injector lag", float, "%.3f"
|
||||
entry = fuelRunning, "fuel: running", float, "%.3f"
|
||||
entry = actualLastInjection, "fuel: last injection", float, "%.3f"
|
||||
entry = actualLastInjection, "fuel: Last injection", float, "%.3f"
|
||||
entry = baseFuel, "fuel: base", float, "%.2f"
|
||||
entry = fuelPidCorrection,"fuel: short correction", float, "%.2f"
|
||||
entry = fuelPidCorrection,"fuel: Short-term closed loop correction", float, "%.2f"
|
||||
entry = veValue, "fuel: VE", float, "%.3f"
|
||||
entry = injectorDutyCycle,"fuel: injector duty cycle",float,"%.3f"
|
||||
entry = coilDutyCycle, "dwell: coil duty cycle", float,"%.3f"
|
||||
|
|
@ -2513,6 +2517,8 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
|
||||
dialog = pedalSensor, "Accelerator pedal"
|
||||
field = "Accelerator position sensor", throttlePedalPositionAdcChannel
|
||||
field = "Up voltage", throttlePedalUpVoltage
|
||||
field = "Down (WOT) voltage", throttlePedalWOTVoltage
|
||||
|
||||
; Sensor Inputs
|
||||
dialog = otherSensorInputs, "Other Sensor Inputs"
|
||||
|
|
@ -3406,14 +3412,11 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "No2 Direction #2", etb2_directionPin2, {throttlePedalPositionAdcChannel != 16}
|
||||
field = "Two-wire mode", etb2_use_two_wires, {throttlePedalPositionAdcChannel != 16}
|
||||
field = "No2 Control #1", etb2_controlPin1, {throttlePedalPositionAdcChannel != 16 && etb2_use_two_wires == 0}
|
||||
field = "etbDeadband", etbDeadband, {throttlePedalPositionAdcChannel != 16}
|
||||
panel = etbPidDialog
|
||||
|
||||
dialog = etbDialogRight
|
||||
field = "!https://rusefi.com/s/debugmode"
|
||||
field = "Debug mode", debugMode
|
||||
field = "TPS1", tpsADC
|
||||
field = "Pedal", throttlePedalPositionAdcChannel
|
||||
field = "use ETB for idle", useETBforIdleControl
|
||||
field = "ETB idle maximum angle", etbIdleRange
|
||||
field = "Press buttons to calibrate sensors"
|
||||
|
|
|
|||
|
|
@ -82,7 +82,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Tue Jun 25 02:03:17 EDT 2019
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Wed Jun 26 19:24:55 EDT 2019
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -886,7 +886,7 @@ page = 1
|
|||
;no TS info - skipping unusedSpiPadding7 offset 4029
|
||||
mc33972spiDevice = bits,U32, 4032, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4"
|
||||
;no TS info - skipping unusedSpiPadding8 offset 4033
|
||||
;no TS info - skipping etbIdleThrottleRange offset 4036
|
||||
etbIdleThrottleRange = scalar, F32, 4036, "%", 1, 0, 0, 15, 0
|
||||
;no TS info - skipping mainUnusedEnd offset 4040
|
||||
pedalToTpsTable = array, U08, 6400, [8x8],"deg", 1, 0, -720, 720, 2
|
||||
pedalToTpsPedalBins = array, U08, 6464, [8], "%", 1, 0, 0.0, 120.0, 0
|
||||
|
|
@ -1248,20 +1248,23 @@ fileVersion = { 20171101 }
|
|||
fuelPidCorrection = scalar, F32, 268, "ms", 1, 0
|
||||
coilDutyCycle = scalar, F32, 272, "perc", 1, 0
|
||||
accelerationX = scalar, S16, 276, "G", 0.01, 0
|
||||
accelerationY = scalar, S16, 276, "G", 0.01, 0
|
||||
accelerationY = scalar, S16, 278, "G", 0.01, 0
|
||||
oilPressure = scalar, F32, 280, "kPa", 1, 0.0
|
||||
fuelConsumptionPerHour=scalar, F32, 284, "kPa", 1, 0.0
|
||||
injectionOffset = scalar, F32, 288, "deg", 1, 0;
|
||||
debugIntField4 = scalar, S16, 292, "val", 1, 0.0;
|
||||
debugIntField5 = scalar, S16, 294, "val", 1, 0.0;
|
||||
recentErrorCode0 = scalar,U16, 298, "error", 1, 0
|
||||
recentErrorCode1 = scalar,U16, 300, "error", 1, 0
|
||||
recentErrorCode2 = scalar,U16, 302, "error", 1, 0
|
||||
recentErrorCode3 = scalar,U16, 304, "error", 1, 0
|
||||
recentErrorCode4 = scalar,U16, 306, "error", 1, 0
|
||||
recentErrorCode5 = scalar,U16, 308, "error", 1, 0
|
||||
recentErrorCode6 = scalar,U16, 310, "error", 1, 0
|
||||
recentErrorCode7 = scalar,U16, 312, "error", 1, 0
|
||||
recentErrorCode0 = scalar,U16, 296, "error", 1, 0
|
||||
recentErrorCode1 = scalar,U16, 298, "error", 1, 0
|
||||
recentErrorCode2 = scalar,U16, 300, "error", 1, 0
|
||||
recentErrorCode3 = scalar,U16, 302, "error", 1, 0
|
||||
recentErrorCode4 = scalar,U16, 304, "error", 1, 0
|
||||
recentErrorCode5 = scalar,U16, 306, "error", 1, 0
|
||||
recentErrorCode6 = scalar,U16, 308, "error", 1, 0
|
||||
recentErrorCode7 = scalar,U16, 310, "error", 1, 0
|
||||
etbTarget = scalar,F32, 312, "%", 1, 0
|
||||
etb1DutyCycle = scalar,F32, 316, "%", 1, 0
|
||||
etb1Error = scalar,F32, 320, "%", 1, 0
|
||||
|
||||
|
||||
;
|
||||
|
|
@ -1716,9 +1719,7 @@ fileVersion = { 20171101 }
|
|||
|
||||
[GaugeConfigurations]
|
||||
|
||||
|
||||
; warmupEnrichGauge = warmupEnrich, "Warmup Enrichment", "%", 100, 150, -1, -1, 101, 105, 0, 0
|
||||
; accelEnrichGauge = accDecEnrich, "Accel Enrich", "%", 50, 150, -1, -1, 999, 999, 0, 0
|
||||
gaugeCategory = Sensors - Extra 2
|
||||
egt1Gauge = egt1, "EGT#1", "C", 0, 2000
|
||||
egt2Gauge = egt2, "EGT#2", "C", 0, 2000
|
||||
egt3Gauge = egt3, "EGT#3", "C", 0, 2000
|
||||
|
|
@ -1728,19 +1729,15 @@ fileVersion = { 20171101 }
|
|||
egt7Gauge = egt7, "EGT#7", "C", 0, 2000
|
||||
egt8Gauge = egt8, "EGT#8", "C", 0, 2000
|
||||
rpmAccelerationGa = rpmAcceleration, "rpm delta", "dRpm", 0, 3, 0, 1, 3, 4, 1, 1
|
||||
massAirFlowValueGa = massAirFlowValue,"Air Flow", "kg/hr", 0, 50, -999, -999, 999, 999, 1, 1
|
||||
knockCountGauge = knockCount,"Knock count", "count", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
knockLevelGauge = knockLevel,"Knock level", "volts", 0, 7, 10, 10, 100, 100, 1, 2
|
||||
fuelTankLevelGauge = fuelTankLevel,"Fuel", "x", 0, 7, 10, 10, 100, 100, 1, 2
|
||||
|
||||
|
||||
|
||||
fuelTankLevelGauge = fuelTankLevel,"Fuel level", "x", 0, 7, 10, 10, 100, 100, 1, 2
|
||||
speedToRpmRatioGauge = speedToRpmRatio, "speed2rpm", "", 0, 100, 0, 0, 100, 100, 4, 4
|
||||
|
||||
gaugeCategory = Status
|
||||
warningCounterGauge = warningCounter, "Counter", "", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
lastErrorCodeGauge = lastErrorCode, "Latest Error", "", 0, 18000, 0, 0, 18000, 18000, 0, 0
|
||||
triggerErrorsCounterGauge = triggerErrorsCounter, "trg err", "count", 0, 15000, 0, 0, 6000, 6000, 0, 0
|
||||
gaugeCategory = ECU Status
|
||||
warningCounterGauge = warningCounter, "Warning count", "", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
lastErrorCodeGauge = lastErrorCode, "Last error", "", 0, 18000, 0, 0, 18000, 18000, 0, 0
|
||||
triggerErrorsCounterGauge = triggerErrorsCounter, "Trigger error count", "count", 0, 15000, 0, 0, 6000, 6000, 0, 0
|
||||
recentErrorCode0Gauge = recentErrorCode0, "Error#1", "", 0, 18000, 0, 0, 18000, 18000, 0, 0
|
||||
recentErrorCode1Gauge = recentErrorCode1, "Error#2", "", 0, 18000, 0, 0, 18000, 18000, 0, 0
|
||||
recentErrorCode2Gauge = recentErrorCode2, "Error#3", "", 0, 18000, 0, 0, 18000, 18000, 0, 0
|
||||
|
|
@ -1749,8 +1746,9 @@ gaugeCategory = Status
|
|||
recentErrorCode5Gauge = recentErrorCode5, "Error#6", "", 0, 18000, 0, 0, 18000, 18000, 0, 0
|
||||
recentErrorCode6Gauge = recentErrorCode6, "Error#7", "", 0, 18000, 0, 0, 18000, 18000, 0, 0
|
||||
recentErrorCode7Gauge = recentErrorCode7, "Error#8", "", 0, 18000, 0, 0, 18000, 18000, 0, 0
|
||||
firmwareVersionGauge = firmwareVersion , "version", "%", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
|
||||
firmwareVersionGauge = firmwareVersion , "ECU Software Version", "%", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
timeSecondsGauge = timeSeconds, "Uptime", "sec", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
|
||||
gaugeCategory = Debug
|
||||
debugFloatField1Gauge = debugFloatField1, "debug f1", "%", 0, 100, 0, 0, 100, 100, 4, 4
|
||||
debugFloatField2Gauge = debugFloatField2, "debug f2: iTerm", "%", -100, 100, 0, 0, 100, 100, 4, 4
|
||||
|
|
@ -1764,73 +1762,79 @@ gaugeCategory = Debug
|
|||
debugIntField3Gauge = debugIntField3, "debug i3", "%", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
debugIntField4Gauge = debugIntField4, "debug i4", "%", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
debugIntField5Gauge = debugIntField5, "debug i5", "%", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
timeSecondsGauge = timeSeconds, "Uptime", "sec", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
|
||||
|
||||
gaugeCategory = Sensors
|
||||
RPMGauge = RPMValue, "Engine Speed", "RPM", 0, 15000, 200, 500, 6000, 6000, 0, 0
|
||||
gaugeCategory = Sensors - Basic
|
||||
RPMGauge = RPMValue, "RPM - engine speed", "RPM", 0, 15000, 200, 500, 6000, 6000, 0, 0
|
||||
#if CELSIUS
|
||||
CLTGauge = coolant, "Coolant Temp", "deg C", -40, 140, -15, 1, 95, 110, 1, 1
|
||||
CLTGauge = coolant, "Coolant temp", "deg C", -40, 140, -15, 1, 95, 110, 1, 1
|
||||
#else
|
||||
CLTGauge = coolant, "Coolant Temp", "deg F", -40, 285, 5, 35, 205, 230, 1, 1
|
||||
CLTGauge = coolant, "Coolant temp", "deg F", -40, 285, 5, 35, 205, 230, 1, 1
|
||||
#endif
|
||||
#if CELSIUS
|
||||
IATGauge = intake, "Intake Air Temp", "deg C", -40, 140, -15, 1, 95, 110, 1, 1
|
||||
IATGauge = intake, "Intake air temp", "deg C", -40, 140, -15, 1, 95, 110, 1, 1
|
||||
#else
|
||||
IATGauge = intake, "Intake Air Temp", "deg F", -40, 285, 5, 35, 205, 230, 1, 1
|
||||
IATGauge = intake, "Intake air temp", "deg F", -40, 285, 5, 35, 205, 230, 1, 1
|
||||
#endif
|
||||
TPSGauge = TPSValue, "Throttle Position", "%", 0, 100, 0, 0, 100, 100, 2, 2
|
||||
afr1Gauge = AFRValue, "Air:Fuel Ratio 1", "", 10, 19.4, 12, 13, 15, 16, 2, 2
|
||||
MAFGauge = MAFValue, "Mass Air Flow", "v", 0, 5, 0, 1, 3, 4, 1, 1
|
||||
VBattGauge = VBatt, "Battery Voltage", "V", 8, 21, 9, 10, 17, 19, 1, 1
|
||||
afr1Gauge = AFRValue, "Air fuel ratio", "", 10, 19.4, 12, 13, 15, 16, 2, 2
|
||||
MAFGauge = MAFValue, "Mass air flow", "v", 0, 5, 0, 1, 3, 4, 1, 1
|
||||
VBattGauge = VBatt, "Battery voltage", "V", 8, 21, 9, 10, 17, 19, 1, 1
|
||||
MAPGauge = MAPValue, "MAP", "kPa", 0, 300, 10, 10, 200, 200, 0, 0
|
||||
tpsADCGauge = tpsADC1, "tps1 ADC", "ADC", 0, 1024, 0, 0, 0, 0, 0, 0
|
||||
massAirFlowValueGa = massAirFlowValue,"Mass air flow", "kg/hr", 0, 50, -999, -999, 999, 999, 1, 1
|
||||
|
||||
|
||||
gaugeCategory = Sensors2
|
||||
VSSGauge = vehicleSpeedKph, "Speed", "kmh", 0, 200, 0, 1, 3, 4, 1, 1
|
||||
pedalPositionGauge = pedalPosition,"Throttle Pedal Position", "%", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
gaugeCategory = Sensors - Extra 1
|
||||
VSSGauge = vehicleSpeedKph, "Vehicle speed", "kmh", 0, 200, 0, 1, 3, 4, 1, 1
|
||||
accelerationXGauge = accelerationX, "Acceleration: X", "acc", -11, 11, 1.0, 1.2, 100, 100, 3, 1
|
||||
accelerationYGauge = accelerationY, "Acceleration: Y", "acc", -11, 11, 1.0, 1.2, 100, 100, 3, 1
|
||||
atmPresCGauge = baroPressure, "Baro", "kPa", 0, 1024, 0, 0, 0, 0, 0, 0
|
||||
atmPresCGauge = baroPressure, "Barometric pressure", "kPa", 0, 1024, 0, 0, 0, 0, 0, 0
|
||||
vvtPositionGauge = vvtPosition, "VVT position", "deg", 0, 100, 0, 0, 720, 720, 0, 0
|
||||
internalMcuTemperatureGauge = internalMcuTemperature, "ECU temperature", "C", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
internalMcuTemperatureGauge = internalMcuTemperature, "ECU temperature", "C", 0, 100, 0, 0, 75, 100, 0, 0
|
||||
OilPressGauge = oilPressure, "Oil Pressure", "kPa", 0, 750, 35, 75, 550, 700, 0, 0
|
||||
fuelConsumptionPerHourGauge=fuelConsumptionPerHour, "f","kPa", 0, 750, 35, 75, 550, 700, 0, 0
|
||||
idleAirValvePositionGauge = idleAirValvePosition, "idle position", "%", 0, 100, 0, 0, 100, 100, 1, 1
|
||||
idleAirValvePositionGauge = idleAirValvePosition, "Idle position", "%", 0, 100, 0, 0, 100, 100, 1, 1
|
||||
|
||||
gaugeCategory = Spark Data
|
||||
ignadvGauge = ignitionAdvance, "Ignition Advance 1", "degrees", -100, 100, -999, -999, 999, 999, 1, 1
|
||||
gaugeCategory = Ignition
|
||||
ignadvGauge = ignitionAdvance, "Ignition timing", "degrees", -100, 100, -999, -999, 999, 999, 1, 1
|
||||
dwellGauge = sparkDwellValue, "Dwell", "mSec", 0, 10, 0.5, 1.0, 6.0, 8.0, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "dwell: coil duty cycle", "perc", -11, 11, 1.0, 1.2, 100, 100, 3, 1
|
||||
|
||||
gaugeCategory = Accel Data
|
||||
engineLoadDeltaGauge = engineLoadDelta,"fuel: load change","value", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
engineLoadAccelExtraGauge = engineLoadAccelExtra,"fuel: load extra","value", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
deltaTpsGauge = deltaTps, "fuel: TPS change", "", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
tpsAccelFuelGauge = tpsAccelFuel,"fuel: TPS enrich", "ms", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
wallFuelAmountGauge = wallFuelAmount, "fuel: wall amount", "ms", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
wallFuelCorrectionGauge = wallFuelCorrection, "fuel: wall correction extra", "ms", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
gaugeCategory = Acceleration Enrichment
|
||||
engineLoadDeltaGauge = engineLoadDelta,"AE: load change","value", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
engineLoadAccelExtraGauge = engineLoadAccelExtra,"AE: load extra","value", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
deltaTpsGauge = deltaTps, "AE: TPS change", "", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
tpsAccelFuelGauge = tpsAccelFuel,"AE: TPS enrich", "ms", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
wallFuelAmountGauge = wallFuelAmount, "AE: wall amount", "ms", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
wallFuelCorrectionGauge = wallFuelCorrection, "AE: wall correction extra", "ms", 0, 100, 0, 0, 100, 100, 0, 0
|
||||
|
||||
|
||||
gaugeCategory = Fuel Data
|
||||
gaugeCategory = Fueling
|
||||
;Name Var Title Units Lo Hi LoD LoW HiW HiD vd ld
|
||||
#if CELSIUS
|
||||
tChargeGauge = tCharge, "fuel: charge T", "deg C", -40, 140, -15, 1, 95, 110, 1, 1
|
||||
tChargeGauge = tCharge, "fuel: Estimated charge temperature", "deg C", -40, 140, -15, 1, 95, 110, 1, 1
|
||||
#else
|
||||
tChargeGauge = tCharge, "fuel: charge T", "deg F", -40, 285, 5, 35, 205, 230, 1, 1
|
||||
tChargeGauge = tCharge, "fuel: Estimated charge temperature", "deg F", -40, 285, 5, 35, 205, 230, 1, 1
|
||||
#endif
|
||||
baroCorrectionGauge = baroCorrection,"BaroCorr", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1
|
||||
baroCorrectionGauge = baroCorrection,"Fuel: Barometric pressure correction", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1
|
||||
crankingFuelGauge = crankingFuelMs, "fuel: cranking", "mSec", 0, 25.5, 1.0, 1.2, 20, 25, 3, 1
|
||||
iatCorrectionGauge = iatCorrection, "fuel: IAT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2
|
||||
cltCorrectionGauge = cltCorrection, "fuel: CLT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2
|
||||
injectorDutyCycleGauge=injectorDutyCycle, "fuel: injector duty cycle","%", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
actualLastInjectionGauge = actualLastInjection, "fuel: last injection", "mSec", 0, 25.5, 1.0, 1.2, 20, 25, 3, 1
|
||||
actualLastInjectionGauge = actualLastInjection, "fuel: Last injection", "mSec", 0, 25.5, 1.0, 1.2, 20, 25, 3, 1
|
||||
veValueGauge = veValue, "fuel: VE", "", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
|
||||
injectorLagMsGauge = injectorLagMs, "fuel: injector lag", "mSec", 0, 25.5, 1.0, 1.2, 20, 25, 3, 1
|
||||
fuelRunningGauge = fuelRunning, "fuel: running", "mSec", 0, 25.5, 1.0, 1.2, 20, 25, 3, 1
|
||||
baseFuelGauge = baseFuel, "fuel: base", "mSec", 0, 25.5, 1.0, 1.2, 20, 25, 3, 1
|
||||
fuelPidCorrectionGauge = fuelPidCorrection, "fuel: short correction", "mSec", -11, 11, 1.0, 1.2, 20, 25, 3, 1
|
||||
|
||||
fuelPidCorrectionGauge = fuelPidCorrection, "fuel: Short-term closed loop correction", "mSec", -11, 11, 1.0, 1.2, 20, 25, 3, 1
|
||||
|
||||
gaugeCategory = Throttle Body (incl. ETB)
|
||||
pedalPositionGauge = pedalPosition, "Throttle pedal position", "%", 0, 120, 0, 0, 100, 100, 1, 1
|
||||
tpsADCGauge = tpsADC1, "tps1 ADC", "ADC", 0, 1024, 0, 0, 0, 0, 0, 0
|
||||
TPSGauge = TPSValue, "Throttle position", "%", 0, 100, 0, 0, 100, 100, 1, 1
|
||||
|
||||
etbTargetGauge = etbTarget, "ETB position target", "%", 0, 100, 0, 0, 100, 100, 1, 1
|
||||
etbErrorGauge = etb1Error, "ETB position error", "%", -20, 20, -10, -5, 5, 10, 2, 0
|
||||
etbDutyCycleGauge = etb1DutyCycle, "ETB duty cycle", "%", -100, 100, -75, -50, 50, 75, 0, 0
|
||||
|
||||
|
||||
[WueAnalyze]
|
||||
|
||||
|
|
@ -1937,9 +1941,9 @@ gaugeCategory = Fuel Data
|
|||
|
||||
entry = injectorLagMs, "fuel: injector lag", float, "%.3f"
|
||||
entry = fuelRunning, "fuel: running", float, "%.3f"
|
||||
entry = actualLastInjection, "fuel: last injection", float, "%.3f"
|
||||
entry = actualLastInjection, "fuel: Last injection", float, "%.3f"
|
||||
entry = baseFuel, "fuel: base", float, "%.2f"
|
||||
entry = fuelPidCorrection,"fuel: short correction", float, "%.2f"
|
||||
entry = fuelPidCorrection,"fuel: Short-term closed loop correction", float, "%.2f"
|
||||
entry = veValue, "fuel: VE", float, "%.3f"
|
||||
entry = injectorDutyCycle,"fuel: injector duty cycle",float,"%.3f"
|
||||
entry = coilDutyCycle, "dwell: coil duty cycle", float,"%.3f"
|
||||
|
|
@ -2516,6 +2520,8 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
|
||||
dialog = pedalSensor, "Accelerator pedal"
|
||||
field = "Accelerator position sensor", throttlePedalPositionAdcChannel
|
||||
field = "Up voltage", throttlePedalUpVoltage
|
||||
field = "Down (WOT) voltage", throttlePedalWOTVoltage
|
||||
|
||||
; Sensor Inputs
|
||||
dialog = otherSensorInputs, "Other Sensor Inputs"
|
||||
|
|
@ -3418,14 +3424,11 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "No2 Direction #2", etb2_directionPin2, {throttlePedalPositionAdcChannel != 16}
|
||||
field = "Two-wire mode", etb2_use_two_wires, {throttlePedalPositionAdcChannel != 16}
|
||||
field = "No2 Control #1", etb2_controlPin1, {throttlePedalPositionAdcChannel != 16 && etb2_use_two_wires == 0}
|
||||
field = "etbDeadband", etbDeadband, {throttlePedalPositionAdcChannel != 16}
|
||||
panel = etbPidDialog
|
||||
|
||||
dialog = etbDialogRight
|
||||
field = "!https://rusefi.com/s/debugmode"
|
||||
field = "Debug mode", debugMode
|
||||
field = "TPS1", tpsADC
|
||||
field = "Pedal", throttlePedalPositionAdcChannel
|
||||
field = "use ETB for idle", useETBforIdleControl
|
||||
field = "ETB idle maximum angle", etbIdleRange
|
||||
field = "Press buttons to calibrate sensors"
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
package com.rusefi.config.generated;
|
||||
|
||||
// this file was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Tue Jun 25 02:03:09 EDT 2019
|
||||
// this file was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Wed Jun 26 19:24:48 EDT 2019
|
||||
|
||||
import com.rusefi.config.*;
|
||||
|
||||
|
|
@ -561,14 +561,14 @@ public class Fields {
|
|||
public static final String GAUGE_NAME_ECU_TEMPERATURE = "ECU temperature";
|
||||
public static final String GAUGE_NAME_ENGINE_LOAD = "Engine Load";
|
||||
public static final String GAUGE_NAME_FUEL_BASE = "fuel: base";
|
||||
public static final String GAUGE_NAME_FUEL_CHARGE_TEMP = "fuel: charge T";
|
||||
public static final String GAUGE_NAME_FUEL_CHARGE_TEMP = "fuel: Estimated charge temperature";
|
||||
public static final String GAUGE_NAME_FUEL_CLT_CORR = "fuel: CLT correction";
|
||||
public static final String GAUGE_NAME_FUEL_CRANKING = "fuel: cranking";
|
||||
public static final String GAUGE_NAME_FUEL_EL_EXTRA = "fuel: engine load acceleration extra fuel";
|
||||
public static final String GAUGE_NAME_FUEL_IAT_CORR = "fuel: IAT correction";
|
||||
public static final String GAUGE_NAME_FUEL_INJ_DUTY = "fuel: injector duty cycle";
|
||||
public static final String GAUGE_NAME_FUEL_LAST_INJECTION = "fuel: last injection";
|
||||
public static final String GAUGE_NAME_FUEL_PID_CORR = "fuel: short correction";
|
||||
public static final String GAUGE_NAME_FUEL_LAST_INJECTION = "fuel: Last injection";
|
||||
public static final String GAUGE_NAME_FUEL_PID_CORR = "fuel: Short-term closed loop correction";
|
||||
public static final String GAUGE_NAME_FUEL_RUNNING = "fuel: running";
|
||||
public static final String GAUGE_NAME_FUEL_TPS_EXTRA = "fuel: TPS acceleration extra fuel ms";
|
||||
public static final String GAUGE_NAME_FUEL_TPS_ROC = "fuel: TPS change";
|
||||
|
|
|
|||
Loading…
Reference in New Issue