rusefi
/
rusefi-1
mirror of https://github.com/rusefi/rusefi-1.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

More compile and warning clean ups. 

(cherry picked from commit d1cf758bfeee11180e7000c24415acf8d7bcd430)
This commit is contained in:
DonaldBecker 2019-11-06 20:18:21 -05:00 committed by rusefi
parent 6fa5a1a3f4
commit 7c3594c95a
1 changed files with 23 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

32
firmware/config/boards/skeleton/board_configuration.cpp
View File

@ -2,7 +2,7 @@
* @file boards/skeleton/board_configuration.cpp
*
*
* @brief Configuration defaults for an example RusEFI board
* @brief Example configuration defaults for a RusEFI board
*
* @author Donald Becker November 2019
* @author Hugo Becker November 2019
@ -10,7 +10,16 @@
* This file is an example of board-specific firmware for RusEFI.
* It contains the unique code need for the setup of a specific board.
*
* These are called from firmware/controllers/algo/engine_configuration.cpp
* This file must contain the configuration for the hard-wired aspects
* of the board, for instance the pins used for a specific MCU functional
* unit such as SPI.
*
* It may also contain preferences for the assignment of external connector
* such as which analog input is used to measure coolant temperature, or
* of if an analog input is connected to a throttle pedal.
*
* These initialization functions are called from
* firmware/controllers/algo/engine_configuration.cpp
* void setBoardConfigurationOverrides(void);
* void setPinConfigurationOverrides(void);
* void setSerialConfigurationOverrides(void);
@ -135,6 +144,9 @@ void setBoardConfigurationOverrides(void) {
engineConfiguration->communicationLedPin = GPIOE_2;
engineConfiguration->FatalErrorPin = GPIOE_3;
engineConfiguration->runningLedPin = GPIOE_4;
engineConfiguration->warningLedPin = GPIOE_5;
engineConfiguration->checkEngineLedPin = GPIOE_6;
engineConfiguration->errorLedPin = GPIOE_7;
// Set injector pins and the pin output mode
boardConfiguration->injectionPinMode = OM_DEFAULT;
@ -159,7 +171,8 @@ void setBoardConfigurationOverrides(void) {
}
// Board-specific scaling values to convert ADC fraction to Volts.
// It is good to make the math explicit, but still compile time constants
// It is good practice to make the math explicit, but still simple.
// The results should be compile time constants
// The ADC reference voltage
engineConfiguration->adcVcc = 3.30f;
@ -174,8 +187,7 @@ void setBoardConfigurationOverrides(void) {
(49.0f / 10.0f) * engineConfiguration->analogInputDividerCoefficient;
engineConfiguration->vbattAdcChannel = EFI_ADC_11;
// Configure any special on-board chips
setupTle8888();
setupEtb();
@ -198,7 +210,7 @@ void setBoardConfigurationOverrides(void) {
// TLE8888_PIN_22: "34 - GP Out 2"
boardConfiguration->fanPin = TLE8888_PIN_22;
// "required" hardware is done - set some reasonable defaults
// The "required" hardware is done - set some reasonable input defaults
setupDefaultSensorInputs();
// Some sensible defaults for other options
@ -210,14 +222,16 @@ void setBoardConfigurationOverrides(void) {
engineConfiguration->specs.cylindersCount = 4;
engineConfiguration->specs.firingOrder = FO_1_3_4_2;
engineConfiguration->ignitionMode = IM_INDIVIDUAL_COILS; // IM_WASTED_SPARK
// Ign is IM_ONE_COIL, IM_TWO_COILS, IM_INDIVIDUAL_COILS, IM_WASTED_SPARK
engineConfiguration->ignitionMode = IM_INDIVIDUAL_COILS;
// Inj mode: IM_SIMULTANEOUS, IM_SEQUENTIAL, IM_BATCH, IM_SINGLE_POINT
engineConfiguration->crankingInjectionMode = IM_SIMULTANEOUS;
engineConfiguration->injectionMode = IM_SIMULTANEOUS;//IM_BATCH;// IM_SEQUENTIAL;
engineConfiguration->injectionMode = IM_SIMULTANEOUS;
}
void setAdcChannelOverrides(void) {
}
/*
* Local variables:
* c-basic-indent: 4