hi-low mess progress

2017-05-06 19:42:34 -04:00 · 2017-05-06 19:42:34 -04:00 · 8c23b793ad
parent 5764cc3e3b
commit 8c23b793ad
4 changed files with 33628 additions and 21074 deletions
--- a/hardware/frankenso/frankenso.kicad_pcb
+++ b/hardware/frankenso/frankenso.kicad_pcb
--- a/hardware/frankenso/frankenso.net
+++ b/hardware/frankenso/frankenso.net
--- a/hardware/frankenso/frankenso.sch
+++ b/hardware/frankenso/frankenso.sch
@ -71,6 +71,31 @@ Comment3 ""
 Comment4 ""
 $EndDescr
 $Sheet
+S 9600 5350 1500 1000
+U 52ED7C56
+F0 "hi-lo" 50
+F1 "hi-lo.sch" 50
+F2 "DOHL2" I L 9600 5500 60 
+F3 "DOHL4" I L 9600 5700 60 
+F4 "DOHL1" I L 9600 5400 60 
+F5 "DOHL3" I L 9600 5600 60 
+F6 "DOHL6" I L 9600 5900 60 
+F7 "DOHL5" I L 9600 5800 60 
+F8 "HL1" I R 11100 5400 60 
+F9 "HL2" I R 11100 5500 60 
+F10 "HL3" I R 11100 5600 60 
+F11 "HL4" I R 11100 5700 60 
+F12 "HL5" I R 11100 5800 60 
+F13 "HL6" I R 11100 5900 60 
+F14 "12V" I R 11100 6300 60 
+F15 "5V" I L 9600 6300 60 
+F16 "GND" I R 11100 6200 60 
+F17 "DOHL8" I L 9600 6100 60 
+F18 "DOHL7" I L 9600 6000 60 
+F19 "HL7" I R 11100 6000 60 
+F20 "HL8" I R 11100 6100 60 
+$EndSheet
+$Sheet
 S 5700 3700 1450 1400
 U 52A5358C
 F0 "adc_amp_divider" 50
@ -1392,7 +1417,7 @@ F15 "PE15" I R 9000 9100 60
 F16 "PB11" I L 7750 5650 60 
 F17 "PB13" I L 7750 5350 60 
 F18 "PB15" I L 7750 5550 60 
-F19 "PD9" I R 9000 6100 60 
+F19 "PD9" I R 9000 6000 60 
 F20 "PD11" I R 9000 10000 60 
 F21 "PD13" I L 7750 9400 60 
 F22 "PD15" I L 7750 9600 60 
@ -1405,14 +1430,14 @@ F28 "PA4" I L 7750 4450 60
 F29 "PA6" I L 7750 4750 60 
 F30 "PC4" I L 7750 4950 60 
 F31 "PB0" I L 7750 5250 60 
-F32 "PE8" I R 9000 5800 60 
-F33 "PE10" I R 9000 5900 60 
+F32 "PE8" I R 9000 5900 60 
+F33 "PE10" I R 9000 5800 60 
 F34 "PE12" I R 9000 5700 60 
-F35 "PE14" I R 9000 5500 60 
+F35 "PE14" I R 9000 5600 60 
 F36 "PB10" I R 9000 9200 60 
 F37 "PB12" I R 9000 7400 60 
 F38 "PB14" I L 7750 5450 60 
-F39 "PD8" I R 9000 6000 60 
+F39 "PD8" I R 9000 6100 60 
 F40 "PD10" I R 9000 9700 60 
 F41 "PD12" I L 7750 9300 60 
 F42 "PD14" I L 7750 9500 60 
@ -1452,8 +1477,8 @@ F75 "PD0" I R 9000 9550 60
 F76 "PC11" I L 7750 6500 60 
 F77 "PA15" I L 7750 8100 60 
 F78 "PA13" I L 7750 10350 60 
-F79 "PC9" I R 9000 5600 60 
-F80 "PC7" I R 9000 5400 60 
+F79 "PC9" I R 9000 5400 60 
+F80 "PC7" I R 9000 5500 60 
 F81 "GND" I L 7750 3750 60 
 F82 "PB2-NC" I L 7750 7700 60 
 F83 "NC-PA10" I L 7750 7600 60 
@ -2836,21 +2861,8 @@ Connection ~ 7600 4950
 $Comp
 L CONN_1 P67
 U 1 1 58A84EDD
-P 9250 5350
-F 0 "P67" H 9330 5350 40  0000 L CNN
-F 1 "CONN_1" H 9250 5405 30  0001 C CNN
-F 2 "Pin_Headers:Pin_Header_Straight_1x01_Pitch2.00mm" V 2780 -1500 60  0001 C CNN
-F 3 "" H 9250 5350 60  0001 C CNN
-F 4 "DO NOT POPULATE,DNP" V 2780 -1500 60  0001 C CNN "MFG,MFG#"
-F 5 "DO NOT POPULATE,DNP" V 2780 -1500 60  0001 C CNN "VEND1,VEND1#"
-	1    9250 5350
-	1    0    0    -1  
-$EndComp
-$Comp
-L CONN_1 P68
-U 1 1 58A85C91
 P 9250 5450
-F 0 "P68" H 9330 5450 40  0000 L CNN
+F 0 "P67" H 9330 5450 40  0000 L CNN
 F 1 "CONN_1" H 9250 5505 30  0001 C CNN
 F 2 "Pin_Headers:Pin_Header_Straight_1x01_Pitch2.00mm" V 2780 -1400 60  0001 C CNN
 F 3 "" H 9250 5450 60  0001 C CNN
@ -2860,10 +2872,10 @@ F 5 "DO NOT POPULATE,DNP" V 2780 -1400 60  0001 C CNN "VEND1,VEND1#"
 	1    0    0    -1  
 $EndComp
 $Comp
-L CONN_1 P69
-U 1 1 58A8634E
+L CONN_1 P68
+U 1 1 58A85C91
 P 9250 5550
-F 0 "P69" H 9330 5550 40  0000 L CNN
+F 0 "P68" H 9330 5550 40  0000 L CNN
 F 1 "CONN_1" H 9250 5605 30  0001 C CNN
 F 2 "Pin_Headers:Pin_Header_Straight_1x01_Pitch2.00mm" V 2780 -1300 60  0001 C CNN
 F 3 "" H 9250 5550 60  0001 C CNN
@ -2873,6 +2885,19 @@ F 5 "DO NOT POPULATE,DNP" V 2780 -1300 60  0001 C CNN "VEND1,VEND1#"
 	1    0    0    -1  
 $EndComp
 $Comp
+L CONN_1 P69
+U 1 1 58A8634E
+P 9250 5350
+F 0 "P69" H 9330 5350 40  0000 L CNN
+F 1 "CONN_1" H 9250 5405 30  0001 C CNN
+F 2 "Pin_Headers:Pin_Header_Straight_1x01_Pitch2.00mm" V 2780 -1500 60  0001 C CNN
+F 3 "" H 9250 5350 60  0001 C CNN
+F 4 "DO NOT POPULATE,DNP" V 2780 -1500 60  0001 C CNN "MFG,MFG#"
+F 5 "DO NOT POPULATE,DNP" V 2780 -1500 60  0001 C CNN "VEND1,VEND1#"
+	1    9250 5350
+	1    0    0    -1  
+$EndComp
+$Comp
 L CONN_1 P70
 U 1 1 58A86A0E
 P 9250 5650
@ -2888,21 +2913,8 @@ $EndComp
 $Comp
 L CONN_1 P71
 U 1 1 58A87471
-P 9250 5750
-F 0 "P71" H 9330 5750 40  0000 L CNN
-F 1 "CONN_1" H 9250 5805 30  0001 C CNN
-F 2 "Pin_Headers:Pin_Header_Straight_1x01_Pitch2.00mm" V 2780 -1100 60  0001 C CNN
-F 3 "" H 9250 5750 60  0001 C CNN
-F 4 "DO NOT POPULATE,DNP" V 2780 -1100 60  0001 C CNN "MFG,MFG#"
-F 5 "DO NOT POPULATE,DNP" V 2780 -1100 60  0001 C CNN "VEND1,VEND1#"
-	1    9250 5750
-	1    0    0    -1  
-$EndComp
-$Comp
-L CONN_1 P72
-U 1 1 58A87B37
 P 9250 5850
-F 0 "P72" H 9330 5850 40  0000 L CNN
+F 0 "P71" H 9330 5850 40  0000 L CNN
 F 1 "CONN_1" H 9250 5905 30  0001 C CNN
 F 2 "Pin_Headers:Pin_Header_Straight_1x01_Pitch2.00mm" V 2780 -1000 60  0001 C CNN
 F 3 "" H 9250 5850 60  0001 C CNN
@ -2912,23 +2924,23 @@ F 5 "DO NOT POPULATE,DNP" V 2780 -1000 60  0001 C CNN "VEND1,VEND1#"
 	1    0    0    -1  
 $EndComp
 $Comp
-L CONN_1 P73
-U 1 1 58A88200
-P 9250 5950
-F 0 "P73" H 9330 5950 40  0000 L CNN
-F 1 "CONN_1" H 9250 6005 30  0001 C CNN
-F 2 "Pin_Headers:Pin_Header_Straight_1x01_Pitch2.00mm" V 2780 -900 60  0001 C CNN
-F 3 "" H 9250 5950 60  0001 C CNN
-F 4 "DO NOT POPULATE,DNP" V 2780 -900 60  0001 C CNN "MFG,MFG#"
-F 5 "DO NOT POPULATE,DNP" V 2780 -900 60  0001 C CNN "VEND1,VEND1#"
-	1    9250 5950
+L CONN_1 P72
+U 1 1 58A87B37
+P 9250 5750
+F 0 "P72" H 9330 5750 40  0000 L CNN
+F 1 "CONN_1" H 9250 5805 30  0001 C CNN
+F 2 "Pin_Headers:Pin_Header_Straight_1x01_Pitch2.00mm" V 2780 -1100 60  0001 C CNN
+F 3 "" H 9250 5750 60  0001 C CNN
+F 4 "DO NOT POPULATE,DNP" V 2780 -1100 60  0001 C CNN "MFG,MFG#"
+F 5 "DO NOT POPULATE,DNP" V 2780 -1100 60  0001 C CNN "VEND1,VEND1#"
+	1    9250 5750
 	1    0    0    -1  
 $EndComp
 $Comp
-L CONN_1 P74
-U 1 1 58A888CC
+L CONN_1 P73
+U 1 1 58A88200
 P 9250 6050
-F 0 "P74" H 9330 6050 40  0000 L CNN
+F 0 "P73" H 9330 6050 40  0000 L CNN
 F 1 "CONN_1" H 9250 6105 30  0001 C CNN
 F 2 "Pin_Headers:Pin_Header_Straight_1x01_Pitch2.00mm" V 2780 -800 60  0001 C CNN
 F 3 "" H 9250 6050 60  0001 C CNN
@ -2937,6 +2949,19 @@ F 5 "DO NOT POPULATE,DNP" V 2780 -800 60  0001 C CNN "VEND1,VEND1#"
 	1    9250 6050
 	1    0    0    -1  
 $EndComp
+$Comp
+L CONN_1 P74
+U 1 1 58A888CC
+P 9250 5950
+F 0 "P74" H 9330 5950 40  0000 L CNN
+F 1 "CONN_1" H 9250 6005 30  0001 C CNN
+F 2 "Pin_Headers:Pin_Header_Straight_1x01_Pitch2.00mm" V 2780 -900 60  0001 C CNN
+F 3 "" H 9250 5950 60  0001 C CNN
+F 4 "DO NOT POPULATE,DNP" V 2780 -900 60  0001 C CNN "MFG,MFG#"
+F 5 "DO NOT POPULATE,DNP" V 2780 -900 60  0001 C CNN "VEND1,VEND1#"
+	1    9250 5950
+	1    0    0    -1  
+$EndComp
 Wire Wire Line
 	9100 5350 9100 5400
 Connection ~ 9100 5400
@ -3045,29 +3070,4 @@ Wire Wire Line
 	8700 550  12100 550 
 Text GLabel 8700 550  0    60   Input ~ 0
 12V-SNUB
-$Sheet
-S 9600 5350 1500 975 
-U 52ED7C56
-F0 "hi-lo" 50
-F1 "hi-lo.sch" 50
-F2 "DOHL2" I L 9600 5400 60 
-F3 "DOHL4" I L 9600 5700 60 
-F4 "DOHL1" I L 9600 5600 60 
-F5 "DOHL3" I L 9600 5500 60 
-F6 "DOHL6" I L 9600 5800 60 
-F7 "DOHL5" I L 9600 5900 60 
-F8 "HL1" I R 11100 5400 60 
-F9 "HL2" I R 11100 5500 60 
-F10 "HL3" I R 11100 5600 60 
-F11 "HL4" I R 11100 5700 60 
-F12 "HL5" I R 11100 5800 60 
-F13 "HL6" I R 11100 5900 60 
-F14 "12V" I R 11100 6300 60 
-F15 "5V" I L 9600 6300 60 
-F16 "GND" I R 11100 6200 60 
-F17 "DOHL8" I L 9600 6000 60 
-F18 "DOHL7" I L 9600 6100 60 
-F19 "HL7" I R 11100 6000 60 
-F20 "HL8" I R 11100 6100 60 
-$EndSheet
 $EndSCHEMATC
--- a/hardware/frankenso/known_issues.txt
+++ b/hardware/frankenso/known_issues.txt
@ -120,8 +120,8 @@
 120) RESOLVED IN R0.4.2 "PB1 reset defaults" actually it's PD6
 121) RESOLVED IN R0.5 Fix pinout of X2, it should be connected to pad 4 not pad 2. 
 122) RESOLVED IN R0.5 need a jumper between W2 and D12-D23 - NB2 miata fly-back should be wired into main relay 12v not ignition on 12v ADDED JP06
-                      cars like 2003 miata have separate ignition key +12 and main relay +12. We need to separate +12 trace for flyback D15 etc
-                      routed into a separate pin, with an option for jumper into ignition +12
+                         cars like 2003 miata have separate ignition key +12 and main relay +12. We need to separate +12 trace for flyback D15 etc
+                         routed into a separate pin, with an option for jumper into ignition +12
 123) RESOLVED IN R0.4.2 Change C302 from 0.01uF to 0.1uF, which removes loweres the filter cut off frequency, and decreases the noise seen by the ECU. 
 124) RESOLVED IN R0.4.2 Change C210, C220, C240 from 0.01uF to 1uF, which removes loweres the filter cut off frequency, and decreases the noise seen by the ECU. 
 125) RESOLVED IN R0.4.3 W701 is referred to as jumper WJ01 in the notes
@ -140,11 +140,14 @@
 138) RESOLVED IN R0.5 Verified diode polarities, new KICAD libs flipped pin 1
 139) RESOLVED IN R0.5 Change D1004 from VS-50WQ04FNPBF to VS-50WQ04FN-M3
 140) RESOLVED IN R0.5 D1006 "alt diode for D1004" app note needs to get back to power supply page
+
 141) RESOLVED IN R0.5 add an app note regarding not having separate injector/analog/else GND on Frankenso (NOTE ADDED TO PAGE 15)
 142) RESOLVED IN R0.5 Some fab shops do not like soldering 0R 0805 on JUMPER footprint. Need to convert JPO1, JPO4 JPO5 "SM0805_jumper"
 143)                  move D12-D23 schematics to outputs page, add note mentioning that needed for IAC/VVT but not for injectors
-144)                  HL7 & HL8 silkscreen is missing, HL2 silkscreen position wrong
- 
+144) RESOLVED IN R0.5 HL7 & HL8 silkscreen is missing
+145) RESOLVED IN R0.4.3 HI/LO net names are confusing, and jumbled. 
+146) RESOLVED IN R0.5 HI/LO 2 silk screen is on wrong harness pin. 
+
 For honda add-on / rewiring board
 -- Add 2A high side solinoid drive for VTec sol
 -- Add 3rd VR chip for 3rd signal