auto-sync

firmware/console/status_loop.cpp

@@ -209,7 +209,7 @@ static void printSensors(Logging *log, bool fileFormat) {
 	}
 #endif /* EFI_ANALOG_SENSORS */
 
-	if (hasAftSensor(PASS_ENGINE_PARAMETER_F)) {
+	if (hasAfrSensor(PASS_ENGINE_PARAMETER_F)) {
 		reportSensorF(log, fileFormat, "afr", "AFR", getAfr(PASS_ENGINE_PARAMETER_F), 2);
 	}
 

firmware/controllers/algo/obd_error_codes.h

@@ -144,7 +144,7 @@ typedef enum {
 	//P0118 Engine Coolant Temperature Circuit High Input
 	//P0119 Engine Coolant Temperature Circuit Intermittent
 	OBD_Throttle_Position_Sensor_Circuit_Malfunction = 120,
-	//P0121 Throttle Position Sensor/Switch A Circuit Range/Performance Problem
+	OBD_Throttle_Position_Sensor_Range_Performance_Problem = 121,
 	//P0122 Throttle Position Sensor/Switch A Circuit Low Input
 	//P0123 Throttle Position Sensor/Switch A Circuit High Input
 	//P0124 Throttle Position Sensor/Switch A Circuit Intermittent

firmware/controllers/core/fsio_core.h

@@ -50,6 +50,8 @@ typedef enum {
 	LE_METHOD_SELF = 114,
 	LE_METHOD_MAP = 115,
 	LE_METHOD_FSIO_ANALOG_INPUT = 116,
+	LE_METHOD_INTAKE_VVT = 117,
+	LE_METHOD_EXHAUST_VVT = 118,
 
 	Force_4b_le_action = ENUM_32_BITS,
 

firmware/controllers/core/fsio_impl.cpp

@@ -41,6 +41,8 @@ static LENameOrdinalPair leFsioSetting(LE_METHOD_FSIO_SETTING, "fsio_setting");
 static LENameOrdinalPair leFsioTable(LE_METHOD_FSIO_TABLE, "fsio_table");
 static LENameOrdinalPair leFsioAnalogInput(LE_METHOD_FSIO_ANALOG_INPUT, "fsio_input");
 static LENameOrdinalPair leKnock(LE_METHOD_KNOCK, "knock");
+static LENameOrdinalPair leIntakeVVT(LE_METHOD_INTAKE_VVT, "ivvt");
+static LENameOrdinalPair leExhaustVVT(LE_METHOD_EXHAUST_VVT, "evvt");
 
 #define LE_EVAL_POOL_SIZE 32
 
@@ -89,6 +91,9 @@ float getLEValue(Engine *engine, calc_stack_t *s, le_action_e action) {
 		return getMaf(PASS_ENGINE_PARAMETER_F);
 	case LE_METHOD_MAP:
 		return getMap();
+	case LE_METHOD_INTAKE_VVT:
+	case LE_METHOD_EXHAUST_VVT:
+		return engine->triggerCentral.vvtPosition;
 	case LE_METHOD_TIME_SINCE_BOOT:
 		return getTimeNowSeconds();
 	case LE_METHOD_FAN_OFF_SETTING:

firmware/controllers/sensors/ego.cpp

@@ -8,7 +8,7 @@
 
 EXTERN_ENGINE;
 
-bool hasAftSensor(DECLARE_ENGINE_PARAMETER_F) {
+bool hasAfrSensor(DECLARE_ENGINE_PARAMETER_F) {
 	return engineConfiguration->afr.hwChannel != EFI_ADC_NONE;
 }
 

firmware/controllers/sensors/ego.h

@@ -15,7 +15,7 @@
 #include "engine_configuration.h"
 
 float getAfr(DECLARE_ENGINE_PARAMETER_F);
-bool hasAftSensor(DECLARE_ENGINE_PARAMETER_F);
+bool hasAfrSensor(DECLARE_ENGINE_PARAMETER_F);
 void setEgoSensor(ego_sensor_e type DECLARE_ENGINE_PARAMETER_S);
 
 #endif

firmware/controllers/sensors/tps.cpp

@@ -63,6 +63,13 @@ percent_t getTpsValue(int adc DECLARE_ENGINE_PARAMETER_S) {
 		return NAN;
 	}
 	float result = interpolate(TPS_TS_CONVERSION * engineConfiguration->tpsMax, 100, TPS_TS_CONVERSION * engineConfiguration->tpsMin, 0, adc);
+	if (result < engineConfiguration->tpsErrorDetectionTooLow) {
+		warning(OBD_Throttle_Position_Sensor_Circuit_Malfunction, "TPS too low: %f", result);
+	}
+	if (result > engineConfiguration->tpsErrorDetectionTooHigh) {
+		warning(OBD_Throttle_Position_Sensor_Range_Performance_Problem, "TPS too high: %f", result);
+	}
+
 	// this would put the value into the 0-100 range
 	return maxF(0, minF(100, result));
 }

firmware/rusefi.cpp

@@ -281,7 +281,7 @@ void firmwareError(obd_code_e code, const char *errorMsg, ...) {
 	}
 }
 
-static char UNUSED_RAM_SIZE[1200];
+static char UNUSED_RAM_SIZE[1100];
 
 static char UNUSED_CCM_SIZE[26500] CCM_OPTIONAL;