diff --git a/hardware/frankenso/known_issues.txt b/hardware/frankenso/known_issues.txt
index fbe98e1db8..d31af16faa 100644
--- a/hardware/frankenso/known_issues.txt
+++ b/hardware/frankenso/known_issues.txt
@@ -122,7 +122,8 @@
 122)                  need a jumper between W2 and D12-D23 - NB2 miata fly-back should be wired into main relay 12v not ignition on 12v
 123) RESOLVED IN R0.4.2 Change C302 from 0.01uF to 0.1uF, which removes loweres the filter cut off frequency, and decreases the noise seen by the ECU. 
 124) RESOLVED IN R0.4.2 Change C210, C220, C240 from 0.01uF to 1uF, which removes loweres the filter cut off frequency, and decreases the noise seen by the ECU. 
-
+125)                  W701 is referred to as jumper WJ01 in the notes
+126)                  Add a note about optional D12-D23 for solenoids
 
 For honda add-on / rewiring board
 -- Add 2A high side solinoid drive for VTec sol