warnings (#1169)

firmware/controllers/system/timer/event_queue.cpp

@@ -108,12 +108,10 @@ efitime_t EventQueue::getNextEventTime(efitime_t nowX) const {
 	return EMPTY_QUEUE;
 }
 
-static scheduling_s * longScheduling;
 /**
  * See also maxPrecisionCallbackDuration for total hw callback time
  */
 uint32_t maxEventCallbackDuration = 0;
-static uint32_t lastEventCallbackDuration;
 
 /**
  * Invoke all pending actions prior to specified timestamp

firmware/controllers/trigger/decoders/trigger_structure.cpp

@@ -102,7 +102,7 @@ void TriggerWaveform::initialize(operation_mode_e operationMode) {
 #endif
 }
 
-int TriggerWaveform::getSize() const {
+size_t TriggerWaveform::getSize() const {
 	return privateTriggerDefinitionSize;
 }
 
@@ -129,7 +129,7 @@ angle_t TriggerWaveform::getCycleDuration() const {
  * Trigger event count equals engine cycle event count if we have a cam sensor.
  * Two trigger cycles make one engine cycle in case of a four stroke engine If we only have a cranksensor.
  */
-uint32_t TriggerWaveform::getLength() const {
+size_t TriggerWaveform::getLength() const {
 	/**
 	 * 4 for FOUR_STROKE_SYMMETRICAL_CRANK_SENSOR
 	 * 2 for FOUR_STROKE_CRANK_SENSOR

firmware/controllers/trigger/decoders/trigger_structure.h

@@ -45,7 +45,7 @@
  */
 class event_trigger_position_s {
 public:
-	uint32_t triggerEventIndex = 0;
+	size_t triggerEventIndex = 0;
 
 	angle_t angleOffsetFromTriggerEvent = 0;
 
@@ -242,8 +242,8 @@ public:
 	/**
 	 * this one is per CRANKshaft revolution
 	 */
-	uint32_t getLength() const;
-	int getSize() const;
+	size_t getLength() const;
+	size_t getSize() const;
 
 	int getTriggerWaveformSynchPointIndex() const;
 	void prepareShape();

firmware/hw_layer/can_hw.cpp

@@ -222,6 +222,8 @@ public:
 	}
 
 	void PeriodicTask(efitime_t nowNt) {
+		UNUSED(nowNt);
+
 		switch (engineConfiguration->canNbcType) {
 		case CAN_BUS_NBC_BMW:
 			canDashboardBMW();

firmware/init/sensor/init_oil_pressure.cpp

@@ -23,7 +23,7 @@ void configureOilPressure(LinearFunc func, const oil_pressure_config_s& cfg)
 	float greaterOutput = val1 > val2 ? val1 : val2;
 
 	// Allow slightly negative output (-5kpa) so as to not fail the sensor when engine is off
-	oilpSensorFunc.configure(cfg.v1, val1, cfg.v2, val2, /*minOutput*/ -5, greaterOutput);
+	func.configure(cfg.v1, val1, cfg.v2, val2, /*minOutput*/ -5, greaterOutput);
 }
 
 void initOilPressure() {