mirror of https://github.com/rusefi/rusefi-1.git
manual gen
This commit is contained in:
rusefi
parent
03f4efa0b2
commit
9a6dc8d101
|
|
@ -1,7 +1,7 @@
|
|||
#include "global.h"
|
||||
#include "rusefi_enums.h"
|
||||
#include "rusefi_hw_enums.h"
|
||||
// was generated automatically by rusEfi tool from rusefi_hw_enums.h // was generated automatically by rusEfi tool from rusefi_enums.h // by enum2string.jar tool on Thu May 21 20:39:11 EDT 2020
|
||||
// was generated automatically by rusEfi tool from rusefi_hw_enums.h // was generated automatically by rusEfi tool from rusefi_enums.h // by enum2string.jar tool on Sun Jun 14 17:00:26 EDT 2020
|
||||
// see also gen_config_and_enums.bat
|
||||
|
||||
|
||||
|
|
@ -385,6 +385,8 @@ case TLE6240_PIN_9:
|
|||
}
|
||||
const char *getCan_nbc_e(can_nbc_e value){
|
||||
switch(value) {
|
||||
case CAN_BUS_BMW_E90:
|
||||
return "CAN_BUS_BMW_E90";
|
||||
case CAN_BUS_MAZDA_RX8:
|
||||
return "CAN_BUS_MAZDA_RX8";
|
||||
case CAN_BUS_NBC_BMW:
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on kineris_gen_config.bat integration/rusefi_config.txt Sat Jun 13 23:14:52 EDT 2020
|
||||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on kineris_gen_config.bat integration/rusefi_config.txt Sun Jun 14 17:00:22 EDT 2020
|
||||
// by class com.rusefi.output.CHeaderConsumer
|
||||
// begin
|
||||
#ifndef CONFIG_BOARDS_KINETIS_CONFIG_CONTROLLERS_ALGO_ENGINE_CONFIGURATION_GENERATED_STRUCTURES_H
|
||||
|
|
@ -2551,9 +2551,19 @@ struct engine_configuration_s {
|
|||
*/
|
||||
float throttlePedalSecondaryWOTVoltage;
|
||||
/**
|
||||
* set can_baudrate
|
||||
* offset 2108
|
||||
*/
|
||||
uint32_t unused_former_warmup_target_afr[6];
|
||||
can_baudrate_e canBaudRate;
|
||||
/**
|
||||
* need 4 byte alignment
|
||||
* offset 2109
|
||||
*/
|
||||
uint8_t alignmentFill_at_2109[3];
|
||||
/**
|
||||
* offset 2112
|
||||
*/
|
||||
uint32_t unused_former_warmup_target_afr[5];
|
||||
/**
|
||||
* kPa value at which we need to cut fuel and spark, 0 if not enabled
|
||||
* offset 2132
|
||||
|
|
@ -3498,4 +3508,4 @@ typedef struct persistent_config_s persistent_config_s;
|
|||
|
||||
#endif
|
||||
// end
|
||||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on kineris_gen_config.bat integration/rusefi_config.txt Sat Jun 13 23:14:52 EDT 2020
|
||||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on kineris_gen_config.bat integration/rusefi_config.txt Sun Jun 14 17:00:22 EDT 2020
|
||||
|
|
|
|||
|
|
@ -38,6 +38,7 @@
|
|||
#define afterstartHoldTime_offset 6152
|
||||
#define alFIn_offset 4024
|
||||
#define alignEngineSnifferAtTDC_offset 744
|
||||
#define alignmentFill_at_2109_offset 2109
|
||||
#define alignmentFill_at_4514_offset 4514
|
||||
#define alternator_antiwindupFreq_offset 1764
|
||||
#define alternator_derivativeFilterLoss_offset 1760
|
||||
|
|
@ -177,7 +178,9 @@
|
|||
#define camInputs2_offset 557
|
||||
#define camInputs3_offset 558
|
||||
#define camInputs4_offset 559
|
||||
#define can_baudrate_e_enum "100kbps", "250kbps" , "500kbps", "1Mbps"
|
||||
#define CAN_DEFAULT_BASE 0x200
|
||||
#define canBaudRate_offset 2108
|
||||
#define canNbcType_offset 480
|
||||
#define canReadEnabled_offset 1464
|
||||
#define canRxPin_offset 709
|
||||
|
|
@ -1328,7 +1331,7 @@
|
|||
#define unused_1484_bit_29_offset 1476
|
||||
#define unused_1484_bit_30_offset 1476
|
||||
#define unused_1484_bit_31_offset 1476
|
||||
#define unused_former_warmup_target_afr_offset 2108
|
||||
#define unused_former_warmup_target_afr_offset 2112
|
||||
#define unusedAt712_offset 712
|
||||
#define unusedAtOldBoardConfigurationEnd_offset 1200
|
||||
#define unusedBit4_1476_offset 1476
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
#include "global.h"
|
||||
#include "rusefi_enums.h"
|
||||
#include "rusefi_hw_enums.h"
|
||||
// was generated automatically by rusEfi tool from rusefi_hw_enums.h // was generated automatically by rusEfi tool from rusefi_enums.h // by enum2string.jar tool on Thu May 21 20:39:10 EDT 2020
|
||||
// was generated automatically by rusEfi tool from rusefi_hw_enums.h // was generated automatically by rusEfi tool from rusefi_enums.h // by enum2string.jar tool on Sun Jun 14 17:00:25 EDT 2020
|
||||
// see also gen_config_and_enums.bat
|
||||
|
||||
|
||||
|
|
@ -521,8 +521,23 @@ case TLE8888_PIN_9:
|
|||
}
|
||||
return NULL;
|
||||
}
|
||||
const char *getCan_baudrate_e(can_baudrate_e value){
|
||||
switch(value) {
|
||||
case B100KBPS:
|
||||
return "B100KBPS";
|
||||
case B1MBPS:
|
||||
return "B1MBPS";
|
||||
case B250KBPS:
|
||||
return "B250KBPS";
|
||||
case B500KBPS:
|
||||
return "B500KBPS";
|
||||
}
|
||||
return NULL;
|
||||
}
|
||||
const char *getCan_nbc_e(can_nbc_e value){
|
||||
switch(value) {
|
||||
case CAN_BUS_BMW_E90:
|
||||
return "CAN_BUS_BMW_E90";
|
||||
case CAN_BUS_MAZDA_RX8:
|
||||
return "CAN_BUS_MAZDA_RX8";
|
||||
case CAN_BUS_NBC_BMW:
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
// was generated automatically by rusEfi tool from rusefi_hw_enums.h // was generated automatically by rusEfi tool from rusefi_enums.h // by enum2string.jar tool on Wed May 20 09:04:42 EDT 2020
|
||||
// was generated automatically by rusEfi tool from rusefi_hw_enums.h // was generated automatically by rusEfi tool from rusefi_enums.h // by enum2string.jar tool on Sun Jun 14 17:00:25 EDT 2020
|
||||
// see also gen_config_and_enums.bat
|
||||
|
||||
|
||||
|
|
@ -15,6 +15,7 @@ const char *getAntiLagActivationMode_e(antiLagActivationMode_e value);
|
|||
const char *getBoostType_e(boostType_e value);
|
||||
const char *getBrain_pin_diag_e(brain_pin_diag_e value);
|
||||
const char *getBrain_pin_e(brain_pin_e value);
|
||||
const char *getCan_baudrate_e(can_baudrate_e value);
|
||||
const char *getCan_nbc_e(can_nbc_e value);
|
||||
const char *getCan_vss_nbc_e(can_vss_nbc_e value);
|
||||
const char *getChamber_style_e(chamber_style_e value);
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.bat integration\rusefi_config.txt Sat Jun 13 23:14:18 EDT 2020
|
||||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.bat integration\rusefi_config.txt Sun Jun 14 17:00:00 EDT 2020
|
||||
// by class com.rusefi.output.CHeaderConsumer
|
||||
// begin
|
||||
#ifndef CONTROLLERS_GENERATED_ENGINE_CONFIGURATION_GENERATED_STRUCTURES_H
|
||||
|
|
@ -2551,9 +2551,19 @@ struct engine_configuration_s {
|
|||
*/
|
||||
float throttlePedalSecondaryWOTVoltage;
|
||||
/**
|
||||
* set can_baudrate
|
||||
* offset 2108
|
||||
*/
|
||||
uint32_t unused_former_warmup_target_afr[6];
|
||||
can_baudrate_e canBaudRate;
|
||||
/**
|
||||
* need 4 byte alignment
|
||||
* offset 2109
|
||||
*/
|
||||
uint8_t alignmentFill_at_2109[3];
|
||||
/**
|
||||
* offset 2112
|
||||
*/
|
||||
uint32_t unused_former_warmup_target_afr[5];
|
||||
/**
|
||||
* kPa value at which we need to cut fuel and spark, 0 if not enabled
|
||||
* offset 2132
|
||||
|
|
@ -3498,4 +3508,4 @@ typedef struct persistent_config_s persistent_config_s;
|
|||
|
||||
#endif
|
||||
// end
|
||||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.bat integration\rusefi_config.txt Sat Jun 13 23:14:18 EDT 2020
|
||||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.bat integration\rusefi_config.txt Sun Jun 14 17:00:00 EDT 2020
|
||||
|
|
|
|||
|
|
@ -38,6 +38,7 @@
|
|||
#define afterstartHoldTime_offset 6152
|
||||
#define alFIn_offset 4024
|
||||
#define alignEngineSnifferAtTDC_offset 744
|
||||
#define alignmentFill_at_2109_offset 2109
|
||||
#define alignmentFill_at_4514_offset 4514
|
||||
#define alternator_antiwindupFreq_offset 1764
|
||||
#define alternator_derivativeFilterLoss_offset 1760
|
||||
|
|
@ -177,7 +178,9 @@
|
|||
#define camInputs2_offset 557
|
||||
#define camInputs3_offset 558
|
||||
#define camInputs4_offset 559
|
||||
#define can_baudrate_e_enum "100kbps", "250kbps" , "500kbps", "1Mbps"
|
||||
#define CAN_DEFAULT_BASE 0x200
|
||||
#define canBaudRate_offset 2108
|
||||
#define canNbcType_offset 480
|
||||
#define canReadEnabled_offset 1464
|
||||
#define canRxPin_offset 709
|
||||
|
|
@ -1328,7 +1331,7 @@
|
|||
#define unused_1484_bit_29_offset 1476
|
||||
#define unused_1484_bit_30_offset 1476
|
||||
#define unused_1484_bit_31_offset 1476
|
||||
#define unused_former_warmup_target_afr_offset 2108
|
||||
#define unused_former_warmup_target_afr_offset 2112
|
||||
#define unusedAt712_offset 712
|
||||
#define unusedAtOldBoardConfigurationEnd_offset 1200
|
||||
#define unusedBit4_1476_offset 1476
|
||||
|
|
|
|||
|
|
@ -89,7 +89,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.bat integration\rusefi_config.txt Sun Jun 14 16:07:04 EDT 2020
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.bat integration\rusefi_config.txt Sun Jun 14 17:00:00 EDT 2020
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -194,7 +194,7 @@ page = 1
|
|||
fanOnTemperature = scalar, F32, 468, "*C", 1, 0, 0, 1000.0, 0
|
||||
fanOffTemperature = scalar, F32, 472, "*C", 1, 0, 0, 1000.0, 0
|
||||
vehicleSpeedCoef = scalar, F32, 476, "coef", 1, 0, 0.01, 2000.0, 2
|
||||
canNbcType = bits, U32, 480, [0:7], "None", "FIAT", "VAG" , "MAZDA RX8", "BMW", "W202"
|
||||
canNbcType = bits, U32, 480, [0:7], "None", "FIAT", "VAG" , "MAZDA RX8", "BMW", "W202", "BMW E90"
|
||||
canSleepPeriodMs = scalar, S32, 484, "ms", 1, 0, 0, 1000.0, 2
|
||||
ambiguousOperationMode = bits, U32, 488, [0:7], "INVALID", "4 stroke without cam sensor", "4 stroke with cam sensor", "2 stroke", "4 stroke with symmetrical crank (requires VVT input)", "INVALID", "INVALID", "INVALID"
|
||||
displayMode = bits, U32, 492, [0:7], "none", "hd44780", "hd44780 over pcf8574", "INVALID"
|
||||
|
|
@ -829,7 +829,9 @@ page = 1
|
|||
auxSerialSpeed = scalar, U32, 2096, "BPs", 1, 0, 0,1000000, 0
|
||||
throttlePedalSecondaryUpVoltage = scalar, F32, 2100, "voltage", 1, 0, -6, 6, 2
|
||||
throttlePedalSecondaryWOTVoltage = scalar, F32, 2104, "voltage", 1, 0, -6, 6, 2
|
||||
;no TS info - skipping unused_former_warmup_target_afr offset 2108
|
||||
canBaudRate = bits, U08, 2108, [0:1], "100kbps", "250kbps" , "500kbps", "1Mbps"
|
||||
;no TS info - skipping alignmentFill_at_2109 offset 2109
|
||||
;no TS info - skipping unused_former_warmup_target_afr offset 2112
|
||||
boostCutPressure = scalar, F32, 2132, "kPa", 1, 0, 0, 500, 0
|
||||
mapAccelTaperBins = array, F32, 2136, [8], "counter", 1, 0, 0.0, 300, 0
|
||||
mapAccelTaperMult = array, F32, 2168, [8], "mult", 1, 0, 0.0, 300, 2
|
||||
|
|
@ -3856,6 +3858,7 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "Can Read Enabled", canReadEnabled
|
||||
field = "Can Write Enabled", canWriteEnabled
|
||||
field = "Can Nbc Type", canNbcType
|
||||
field = "Can Baud Rate", canBaudRate
|
||||
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
|
||||
field = "rusEfi CAN data base address", verboseCanBaseAddress
|
||||
field = "Can Sleep Period", canSleepPeriodMs
|
||||
|
|
|
|||
|
|
@ -89,7 +89,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.bat integration\rusefi_config.txt Sun Jun 14 16:07:07 EDT 2020
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.bat integration\rusefi_config.txt Sun Jun 14 17:00:09 EDT 2020
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -194,7 +194,7 @@ page = 1
|
|||
fanOnTemperature = scalar, F32, 468, "*C", 1, 0, 0, 1000.0, 0
|
||||
fanOffTemperature = scalar, F32, 472, "*C", 1, 0, 0, 1000.0, 0
|
||||
vehicleSpeedCoef = scalar, F32, 476, "coef", 1, 0, 0.01, 2000.0, 2
|
||||
canNbcType = bits, U32, 480, [0:7], "None", "FIAT", "VAG" , "MAZDA RX8", "BMW", "W202"
|
||||
canNbcType = bits, U32, 480, [0:7], "None", "FIAT", "VAG" , "MAZDA RX8", "BMW", "W202", "BMW E90"
|
||||
canSleepPeriodMs = scalar, S32, 484, "ms", 1, 0, 0, 1000.0, 2
|
||||
ambiguousOperationMode = bits, U32, 488, [0:7], "INVALID", "4 stroke without cam sensor", "4 stroke with cam sensor", "2 stroke", "4 stroke with symmetrical crank (requires VVT input)", "INVALID", "INVALID", "INVALID"
|
||||
displayMode = bits, U32, 492, [0:7], "none", "hd44780", "hd44780 over pcf8574", "INVALID"
|
||||
|
|
@ -829,7 +829,9 @@ page = 1
|
|||
auxSerialSpeed = scalar, U32, 2096, "BPs", 1, 0, 0,1000000, 0
|
||||
throttlePedalSecondaryUpVoltage = scalar, F32, 2100, "voltage", 1, 0, -6, 6, 2
|
||||
throttlePedalSecondaryWOTVoltage = scalar, F32, 2104, "voltage", 1, 0, -6, 6, 2
|
||||
;no TS info - skipping unused_former_warmup_target_afr offset 2108
|
||||
canBaudRate = bits, U08, 2108, [0:1], "100kbps", "250kbps" , "500kbps", "1Mbps"
|
||||
;no TS info - skipping alignmentFill_at_2109 offset 2109
|
||||
;no TS info - skipping unused_former_warmup_target_afr offset 2112
|
||||
boostCutPressure = scalar, F32, 2132, "kPa", 1, 0, 0, 500, 0
|
||||
mapAccelTaperBins = array, F32, 2136, [8], "counter", 1, 0, 0.0, 300, 0
|
||||
mapAccelTaperMult = array, F32, 2168, [8], "mult", 1, 0, 0.0, 300, 2
|
||||
|
|
@ -3856,6 +3858,7 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "Can Read Enabled", canReadEnabled
|
||||
field = "Can Write Enabled", canWriteEnabled
|
||||
field = "Can Nbc Type", canNbcType
|
||||
field = "Can Baud Rate", canBaudRate
|
||||
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
|
||||
field = "rusEfi CAN data base address", verboseCanBaseAddress
|
||||
field = "Can Sleep Period", canSleepPeriodMs
|
||||
|
|
|
|||
|
|
@ -89,7 +89,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on kineris_gen_config.bat integration/rusefi_config.txt Sun Jun 14 16:07:10 EDT 2020
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on kineris_gen_config.bat integration/rusefi_config.txt Sun Jun 14 17:00:22 EDT 2020
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -194,7 +194,7 @@ page = 1
|
|||
fanOnTemperature = scalar, F32, 468, "*C", 1, 0, 0, 1000.0, 0
|
||||
fanOffTemperature = scalar, F32, 472, "*C", 1, 0, 0, 1000.0, 0
|
||||
vehicleSpeedCoef = scalar, F32, 476, "coef", 1, 0, 0.01, 2000.0, 2
|
||||
canNbcType = bits, U32, 480, [0:7], "None", "FIAT", "VAG" , "MAZDA RX8", "BMW", "W202"
|
||||
canNbcType = bits, U32, 480, [0:7], "None", "FIAT", "VAG" , "MAZDA RX8", "BMW", "W202", "BMW E90"
|
||||
canSleepPeriodMs = scalar, S32, 484, "ms", 1, 0, 0, 1000.0, 2
|
||||
ambiguousOperationMode = bits, U32, 488, [0:7], "INVALID", "4 stroke without cam sensor", "4 stroke with cam sensor", "2 stroke", "4 stroke with symmetrical crank (requires VVT input)", "INVALID", "INVALID", "INVALID"
|
||||
displayMode = bits, U32, 492, [0:7], "none", "hd44780", "hd44780 over pcf8574", "INVALID"
|
||||
|
|
@ -829,7 +829,9 @@ page = 1
|
|||
auxSerialSpeed = scalar, U32, 2096, "BPs", 1, 0, 0,1000000, 0
|
||||
throttlePedalSecondaryUpVoltage = scalar, F32, 2100, "voltage", 1, 0, -6, 6, 2
|
||||
throttlePedalSecondaryWOTVoltage = scalar, F32, 2104, "voltage", 1, 0, -6, 6, 2
|
||||
;no TS info - skipping unused_former_warmup_target_afr offset 2108
|
||||
canBaudRate = bits, U08, 2108, [0:1], "100kbps", "250kbps" , "500kbps", "1Mbps"
|
||||
;no TS info - skipping alignmentFill_at_2109 offset 2109
|
||||
;no TS info - skipping unused_former_warmup_target_afr offset 2112
|
||||
boostCutPressure = scalar, F32, 2132, "kPa", 1, 0, 0, 500, 0
|
||||
mapAccelTaperBins = array, F32, 2136, [8], "counter", 1, 0, 0.0, 300, 0
|
||||
mapAccelTaperMult = array, F32, 2168, [8], "mult", 1, 0, 0.0, 300, 2
|
||||
|
|
@ -3857,6 +3859,7 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "Can Read Enabled", canReadEnabled
|
||||
field = "Can Write Enabled", canWriteEnabled
|
||||
field = "Can Nbc Type", canNbcType
|
||||
field = "Can Baud Rate", canBaudRate
|
||||
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
|
||||
field = "rusEfi CAN data base address", verboseCanBaseAddress
|
||||
field = "Can Sleep Period", canSleepPeriodMs
|
||||
|
|
|
|||
|
|
@ -89,7 +89,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.bat integration\rusefi_config.txt Sun Jun 14 16:07:06 EDT 2020
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.bat integration\rusefi_config.txt Sun Jun 14 17:00:05 EDT 2020
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -194,7 +194,7 @@ page = 1
|
|||
fanOnTemperature = scalar, F32, 468, "*C", 1, 0, 0, 1000.0, 0
|
||||
fanOffTemperature = scalar, F32, 472, "*C", 1, 0, 0, 1000.0, 0
|
||||
vehicleSpeedCoef = scalar, F32, 476, "coef", 1, 0, 0.01, 2000.0, 2
|
||||
canNbcType = bits, U32, 480, [0:7], "None", "FIAT", "VAG" , "MAZDA RX8", "BMW", "W202"
|
||||
canNbcType = bits, U32, 480, [0:7], "None", "FIAT", "VAG" , "MAZDA RX8", "BMW", "W202", "BMW E90"
|
||||
canSleepPeriodMs = scalar, S32, 484, "ms", 1, 0, 0, 1000.0, 2
|
||||
ambiguousOperationMode = bits, U32, 488, [0:7], "INVALID", "4 stroke without cam sensor", "4 stroke with cam sensor", "2 stroke", "4 stroke with symmetrical crank (requires VVT input)", "INVALID", "INVALID", "INVALID"
|
||||
displayMode = bits, U32, 492, [0:7], "none", "hd44780", "hd44780 over pcf8574", "INVALID"
|
||||
|
|
@ -829,7 +829,9 @@ page = 1
|
|||
auxSerialSpeed = scalar, U32, 2096, "BPs", 1, 0, 0,1000000, 0
|
||||
throttlePedalSecondaryUpVoltage = scalar, F32, 2100, "voltage", 1, 0, -6, 6, 2
|
||||
throttlePedalSecondaryWOTVoltage = scalar, F32, 2104, "voltage", 1, 0, -6, 6, 2
|
||||
;no TS info - skipping unused_former_warmup_target_afr offset 2108
|
||||
canBaudRate = bits, U08, 2108, [0:1], "100kbps", "250kbps" , "500kbps", "1Mbps"
|
||||
;no TS info - skipping alignmentFill_at_2109 offset 2109
|
||||
;no TS info - skipping unused_former_warmup_target_afr offset 2112
|
||||
boostCutPressure = scalar, F32, 2132, "kPa", 1, 0, 0, 500, 0
|
||||
mapAccelTaperBins = array, F32, 2136, [8], "counter", 1, 0, 0.0, 300, 0
|
||||
mapAccelTaperMult = array, F32, 2168, [8], "mult", 1, 0, 0.0, 300, 2
|
||||
|
|
@ -3834,6 +3836,7 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "Can Read Enabled", canReadEnabled
|
||||
field = "Can Write Enabled", canWriteEnabled
|
||||
field = "Can Nbc Type", canNbcType
|
||||
field = "Can Baud Rate", canBaudRate
|
||||
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
|
||||
field = "rusEfi CAN data base address", verboseCanBaseAddress
|
||||
field = "Can Sleep Period", canSleepPeriodMs
|
||||
|
|
|
|||
|
|
@ -89,7 +89,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.bat integration\rusefi_config.txt Sun Jun 14 16:07:08 EDT 2020
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.bat integration\rusefi_config.txt Sun Jun 14 17:00:14 EDT 2020
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -194,7 +194,7 @@ page = 1
|
|||
fanOnTemperature = scalar, F32, 468, "*C", 1, 0, 0, 1000.0, 0
|
||||
fanOffTemperature = scalar, F32, 472, "*C", 1, 0, 0, 1000.0, 0
|
||||
vehicleSpeedCoef = scalar, F32, 476, "coef", 1, 0, 0.01, 2000.0, 2
|
||||
canNbcType = bits, U32, 480, [0:7], "None", "FIAT", "VAG" , "MAZDA RX8", "BMW", "W202"
|
||||
canNbcType = bits, U32, 480, [0:7], "None", "FIAT", "VAG" , "MAZDA RX8", "BMW", "W202", "BMW E90"
|
||||
canSleepPeriodMs = scalar, S32, 484, "ms", 1, 0, 0, 1000.0, 2
|
||||
ambiguousOperationMode = bits, U32, 488, [0:7], "INVALID", "4 stroke without cam sensor", "4 stroke with cam sensor", "2 stroke", "4 stroke with symmetrical crank (requires VVT input)", "INVALID", "INVALID", "INVALID"
|
||||
displayMode = bits, U32, 492, [0:7], "none", "hd44780", "hd44780 over pcf8574", "INVALID"
|
||||
|
|
@ -829,7 +829,9 @@ page = 1
|
|||
auxSerialSpeed = scalar, U32, 2096, "BPs", 1, 0, 0,1000000, 0
|
||||
throttlePedalSecondaryUpVoltage = scalar, F32, 2100, "voltage", 1, 0, -6, 6, 2
|
||||
throttlePedalSecondaryWOTVoltage = scalar, F32, 2104, "voltage", 1, 0, -6, 6, 2
|
||||
;no TS info - skipping unused_former_warmup_target_afr offset 2108
|
||||
canBaudRate = bits, U08, 2108, [0:1], "100kbps", "250kbps" , "500kbps", "1Mbps"
|
||||
;no TS info - skipping alignmentFill_at_2109 offset 2109
|
||||
;no TS info - skipping unused_former_warmup_target_afr offset 2112
|
||||
boostCutPressure = scalar, F32, 2132, "kPa", 1, 0, 0, 500, 0
|
||||
mapAccelTaperBins = array, F32, 2136, [8], "counter", 1, 0, 0.0, 300, 0
|
||||
mapAccelTaperMult = array, F32, 2168, [8], "mult", 1, 0, 0.0, 300, 2
|
||||
|
|
@ -3852,6 +3854,7 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "Can Read Enabled", canReadEnabled
|
||||
field = "Can Write Enabled", canWriteEnabled
|
||||
field = "Can Nbc Type", canNbcType
|
||||
field = "Can Baud Rate", canBaudRate
|
||||
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
|
||||
field = "rusEfi CAN data base address", verboseCanBaseAddress
|
||||
field = "Can Sleep Period", canSleepPeriodMs
|
||||
|
|
|
|||
|
|
@ -89,7 +89,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.bat integration\rusefi_config.txt Sun Jun 14 16:07:09 EDT 2020
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.bat integration\rusefi_config.txt Sun Jun 14 17:00:18 EDT 2020
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -194,7 +194,7 @@ page = 1
|
|||
fanOnTemperature = scalar, F32, 468, "*C", 1, 0, 0, 1000.0, 0
|
||||
fanOffTemperature = scalar, F32, 472, "*C", 1, 0, 0, 1000.0, 0
|
||||
vehicleSpeedCoef = scalar, F32, 476, "coef", 1, 0, 0.01, 2000.0, 2
|
||||
canNbcType = bits, U32, 480, [0:7], "None", "FIAT", "VAG" , "MAZDA RX8", "BMW", "W202"
|
||||
canNbcType = bits, U32, 480, [0:7], "None", "FIAT", "VAG" , "MAZDA RX8", "BMW", "W202", "BMW E90"
|
||||
canSleepPeriodMs = scalar, S32, 484, "ms", 1, 0, 0, 1000.0, 2
|
||||
ambiguousOperationMode = bits, U32, 488, [0:7], "INVALID", "4 stroke without cam sensor", "4 stroke with cam sensor", "2 stroke", "4 stroke with symmetrical crank (requires VVT input)", "INVALID", "INVALID", "INVALID"
|
||||
displayMode = bits, U32, 492, [0:7], "none", "hd44780", "hd44780 over pcf8574", "INVALID"
|
||||
|
|
@ -829,7 +829,9 @@ page = 1
|
|||
auxSerialSpeed = scalar, U32, 2096, "BPs", 1, 0, 0,1000000, 0
|
||||
throttlePedalSecondaryUpVoltage = scalar, F32, 2100, "voltage", 1, 0, -6, 6, 2
|
||||
throttlePedalSecondaryWOTVoltage = scalar, F32, 2104, "voltage", 1, 0, -6, 6, 2
|
||||
;no TS info - skipping unused_former_warmup_target_afr offset 2108
|
||||
canBaudRate = bits, U08, 2108, [0:1], "100kbps", "250kbps" , "500kbps", "1Mbps"
|
||||
;no TS info - skipping alignmentFill_at_2109 offset 2109
|
||||
;no TS info - skipping unused_former_warmup_target_afr offset 2112
|
||||
boostCutPressure = scalar, F32, 2132, "kPa", 1, 0, 0, 500, 0
|
||||
mapAccelTaperBins = array, F32, 2136, [8], "counter", 1, 0, 0.0, 300, 0
|
||||
mapAccelTaperMult = array, F32, 2168, [8], "mult", 1, 0, 0.0, 300, 2
|
||||
|
|
@ -3830,6 +3832,7 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
field = "Can Read Enabled", canReadEnabled
|
||||
field = "Can Write Enabled", canWriteEnabled
|
||||
field = "Can Nbc Type", canNbcType
|
||||
field = "Can Baud Rate", canBaudRate
|
||||
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
|
||||
field = "rusEfi CAN data base address", verboseCanBaseAddress
|
||||
field = "Can Sleep Period", canSleepPeriodMs
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
package com.rusefi.config.generated;
|
||||
|
||||
// this file was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.bat integration\rusefi_config.txt Sun Jun 14 15:09:07 EDT 2020
|
||||
// this file was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.bat integration\rusefi_config.txt Sun Jun 14 17:00:00 EDT 2020
|
||||
|
||||
// by class com.rusefi.output.FileJavaFieldsConsumer
|
||||
import com.rusefi.config.*;
|
||||
|
|
@ -41,6 +41,7 @@ public class Fields {
|
|||
public static final int afterstartHoldTime_offset = 6152;
|
||||
public static final int alFIn_offset = 4024;
|
||||
public static final int alignEngineSnifferAtTDC_offset = 744;
|
||||
public static final int alignmentFill_at_2109_offset = 2109;
|
||||
public static final int alignmentFill_at_4514_offset = 4514;
|
||||
public static final int alternator_antiwindupFreq_offset = 1764;
|
||||
public static final int alternator_derivativeFilterLoss_offset = 1760;
|
||||
|
|
@ -177,6 +178,7 @@ public class Fields {
|
|||
public static final int camInputs2_offset = 557;
|
||||
public static final int camInputs3_offset = 558;
|
||||
public static final int camInputs4_offset = 559;
|
||||
public static final int canBaudRate_offset = 2108;
|
||||
public static final int canNbcType_offset = 480;
|
||||
public static final int canReadEnabled_offset = 1464;
|
||||
public static final int canRxPin_offset = 709;
|
||||
|
|
@ -1291,7 +1293,7 @@ public class Fields {
|
|||
public static final int unused_1484_bit_29_offset = 1476;
|
||||
public static final int unused_1484_bit_30_offset = 1476;
|
||||
public static final int unused_1484_bit_31_offset = 1476;
|
||||
public static final int unused_former_warmup_target_afr_offset = 2108;
|
||||
public static final int unused_former_warmup_target_afr_offset = 2112;
|
||||
public static final int unusedAt712_offset = 712;
|
||||
public static final int unusedAtOldBoardConfigurationEnd_offset = 1200;
|
||||
public static final int unusedBit4_1476_offset = 1476;
|
||||
|
|
@ -2113,6 +2115,8 @@ public class Fields {
|
|||
public static final Field AUXSERIALSPEED = Field.create("AUXSERIALSPEED", 2096, FieldType.INT);
|
||||
public static final Field THROTTLEPEDALSECONDARYUPVOLTAGE = Field.create("THROTTLEPEDALSECONDARYUPVOLTAGE", 2100, FieldType.FLOAT);
|
||||
public static final Field THROTTLEPEDALSECONDARYWOTVOLTAGE = Field.create("THROTTLEPEDALSECONDARYWOTVOLTAGE", 2104, FieldType.FLOAT);
|
||||
public static final String[] can_baudrate_e = {"100kbps", "250kbps" , "500kbps", "1Mbps"};
|
||||
public static final Field CANBAUDRATE = Field.create("CANBAUDRATE", 2108, FieldType.INT8, can_baudrate_e);
|
||||
public static final Field BOOSTCUTPRESSURE = Field.create("BOOSTCUTPRESSURE", 2132, FieldType.FLOAT);
|
||||
public static final Field FSIOADC1 = Field.create("FSIOADC1", 2200, FieldType.INT8, adc_channel_e);
|
||||
public static final Field FSIOADC2 = Field.create("FSIOADC2", 2201, FieldType.INT8, adc_channel_e);
|
||||
|
|
@ -3090,6 +3094,7 @@ public class Fields {
|
|||
AUXSERIALSPEED,
|
||||
THROTTLEPEDALSECONDARYUPVOLTAGE,
|
||||
THROTTLEPEDALSECONDARYWOTVOLTAGE,
|
||||
CANBAUDRATE,
|
||||
BOOSTCUTPRESSURE,
|
||||
FSIOADC1,
|
||||
FSIOADC2,
|
||||
|
|
|
|||
Loading…
Reference in New Issue