rusefi
/
rusefi-1
mirror of https://github.com/rusefi/rusefi-1.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Merge pull request #1647 from ksmola/update_ts_mnemonics 

Updated ts mnemonics
This commit is contained in:
rusefillc 2020-07-28 09:10:44 -04:00 committed by GitHub
parent e7a0cd57fe 1f816a1ede
commit a0ff5c4e4e
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 6 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
firmware/integration/rusefi_config.txt
View File

@ -435,7 +435,7 @@ ThermistorConf iat;
float knockBandCustom;+We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override;"kHz", 1, 0.0, 0.0, 10.0, 2
float[DWELL_CURVE_SIZE] sparkDwellRpmBins;On single-coil or wasted spark setups you have to lower dwell at high RPM;"RPM", 1, 0.0, 0.0, 18000, 2
float[DWELL_CURVE_SIZE] sparkDwellRpmBins;On Single Coil or Wasted Spark setups you have to lower dwell at high RPM;"RPM", 1, 0.0, 0.0, 18000, 2
float[DWELL_CURVE_SIZE] sparkDwellValues;;"ms", 1, 0.0, 0.0, 30.0, 2
struct_no_prefix specs_s
@ -460,7 +460,7 @@ int sensorSnifferRpmThreshold;+Disable sensor sniffer above this rpm;"RPM",
int rpmHardLimit;set rpm_hard_limit X;"rpm", 1, 0, 0, 20000.0, 2
#define engine_load_mode_e_enum "MAF", "Alpha-N/TPS", "INVALID", "SPEED DENSITY", "MAF Air Charge", "Alpha-N", "INVALID"
#define engine_load_mode_e_enum "MAF", "Alpha-N/TPS", "INVALID", "Speed Density", "MAF Air Charge", "Alpha-N", "INVALID"
custom engine_load_mode_e 4 bits, U32, @OFFSET@, [0:2], @@engine_load_mode_e_enum@@
@ -473,8 +473,8 @@ injection_mode_e injectionMode;+This is where the fuel injection type is defined
angle_t extraInjectionOffset;+this is about deciding when the injector starts it's squirt\nSee also injectionPhase map\ntodo: do we need even need this since we have the map anyway?;"deg", 1, 0.0, -720, 720, 2
angle_t crankingTimingAngle;+Ignition advance angle used during engine cranking, 5-10 degrees will work as a base setting for most engines.\nset cranking_timing_angle X; "deg", 1, 0.0, -360, 360, 2
custom ignition_mode_e 4 bits, U32, @OFFSET@, [0:1], "One coil", "Individual Coils", "Wasted", "Two distributors"
ignition_mode_e ignitionMode;+"One Coil" is for use on distributed ignition system. "Individual Coils" is to be used when you have one coil per cylinder (COP or similar). "Wasted" means one coil is driving two spark plugs in two cylinders, with one of the sparks not doing anything since it's happening on the exhaust cycle\nset ignition_mode X
custom ignition_mode_e 4 bits, U32, @OFFSET@, [0:1], "Single Coil", "Individual Coils", "Wasted Spark", "Two Distributors"
ignition_mode_e ignitionMode;+"Single Coil" is for use on distributed ignition system. "Individual Coils" is to be used when you have one coil per cylinder (COP or similar). "Wasted Spark" means one coil is driving two spark plugs in two cylinders, with one of the sparks not doing anything since it's happening on the exhaust cycle\nset ignition_mode X
angle_t ignitionOffset;+this value could be used to offset the whole ignition timing table by a constant;"RPM", 1, 0, 0, 3000.0, 0
@ -953,7 +953,7 @@ custom idle_mode_e 4 bits, U32, @OFFSET@, [0:0], "Automatic", "Manual"
bit isManualSpinningMode;Usually if we have no trigger events that means engine is stopped\nUnless we are troubleshooting and spinning the engine by hand - this case a longer\ndelay is needed
bit twoWireBatchInjection;+This is needed if your coils are individually wired and you wish to use batch injection.\nenable two_wire_batch_injection
bit useOnlyRisingEdgeForTrigger;+VR sensors are only precise on rising front\nenable trigger_only_front
bit twoWireBatchIgnition;+This is needed if your coils are individually wired (COP) and you wish to use batch ignition (wasted spark).
bit twoWireBatchIgnition;+This is needed if your coils are individually wired (COP) and you wish to use batch ignition (Wasted Spark).
bit useFixedBaroCorrFromMap
bit useSeparateAdvanceForCranking;+This activates a separate advance table for cranking conditions, this allows cranking advance to be RPM dependant.
bit useAdvanceCorrectionsForCranking;+This enables the various ignition corrections during cranking (IAT, CLT, FSIO and PID idle).
@ -1676,4 +1676,4 @@ end_struct
#define show_test_presets true
#define show_Frankenso_presets true
#define show_microRusEFI_presets true
#define show_Proteus_presets true
#define show_Proteus_presets true