diff --git a/firmware/flash_erase.bat b/firmware/flash_erase.bat
index c440e03064..2e3872e001 100644
--- a/firmware/flash_erase.bat
+++ b/firmware/flash_erase.bat
@@ -14,6 +14,6 @@ if not exist openocd/openocd.exe echo openocd/openocd.exe NOT FOUND
 if not exist openocd/openocd.exe exit -1
 
 
-openocd/openocd           -f openocd/stm32f429disc1.cfg                                    -c init -c targets -c "halt" -c "flash erase_address 0x08000000 0x080000" -c shutdown
+openocd\openocd.exe           -f openocd/stm32f429disc1.cfg                                    -c init -c targets -c "halt" -c "flash erase_address 0x08000000 0x080000" -c shutdown
 
 rem openocd-0.8.0.exe -f interface/stlink-v2.cfg -f board/stm32f4discovery.cfg -c init -c targets -c "halt" -c "flash erase_address 0x08000000 0x080000" -c shutdown
\ No newline at end of file
diff --git a/firmware/flash_openocd.bat b/firmware/flash_openocd.bat
index 837ba73650..fca0a64a51 100644
--- a/firmware/flash_openocd.bat
+++ b/firmware/flash_openocd.bat
@@ -2,7 +2,9 @@ echo I am flash_openocd.bat
 
 cp -r ../misc/install/openocd .
 
+if not exist openocd/openocd.exe echo openocd/openocd.exe NOT FOUND
+if not exist openocd/openocd.exe exit -1
 
-openocd/openocd           -f openocd/stm32f429disc1.cfg                                    -c "program build/rusefi.bin verify reset exit 0x08000000"
+openocd\openocd           -f openocd/stm32f429disc1.cfg                                    -c "program build/rusefi.bin verify reset exit 0x08000000"
 
 rem openocd-0.8.0.exe -f interface/stlink-v2.cfg -f board/stm32f4discovery.cfg -c "program rusefi.bin verify reset exit 0x08000000"