auto-sync

This commit is contained in:
rusEfi 2016-06-26 18:01:52 -04:00
parent 5cd7159bb0
commit c2efaa40db
5 changed files with 74 additions and 41 deletions

View File

@ -1,4 +1,4 @@
// this section was generated automatically by ConfigDefinition.jar based on rusefi_config.txt Sun Jun 26 11:58:16 EDT 2016
// this section was generated automatically by ConfigDefinition.jar based on rusefi_config.txt Sun Jun 26 12:22:01 EDT 2016
// begin
#ifndef ENGINE_CONFIGURATION_GENERATED_H_
#define ENGINE_CONFIGURATION_GENERATED_H_
@ -1627,13 +1627,18 @@ typedef struct {
*/
float egoValueShift;
/**
* Aux Pid #1 dTime
* offset 2408
*/
int auxPid1DT;
/**
* offset 2412
*/
pid_s auxPid1;
/**
* offset 2424
* offset 2428
*/
int unused[156];
int unused[155];
/** total size 3048*/
} engine_configuration_s;
@ -1822,4 +1827,4 @@ typedef struct {
#endif
// end
// this section was generated automatically by ConfigDefinition.jar based on rusefi_config.txt Sun Jun 26 11:58:16 EDT 2016
// this section was generated automatically by ConfigDefinition.jar based on rusefi_config.txt Sun Jun 26 12:22:01 EDT 2016

View File

@ -826,17 +826,17 @@
#define mapHighValueVoltage_offset_hex 960
#define egoValueShift_offset 2404
#define egoValueShift_offset_hex 964
#define auxPid1_offset 2408
#define auxPid1_offset_hex 968
#define auxPid1_pFactor_offset 2408
#define auxPid1_pFactor_offset_hex 968
#define auxPid1_iFactor_offset 2412
#define auxPid1_dFactor_offset 2416
#define auxPid1_dFactor_offset_hex 970
#define auxPid1_offset_offset 2420
#define auxPid1_offset_offset_hex 974
#define unused_offset 2424
#define unused_offset_hex 978
#define auxPid1DT_offset 2408
#define auxPid1DT_offset_hex 968
#define auxPid1_offset 2412
#define auxPid1_pFactor_offset 2412
#define auxPid1_iFactor_offset 2416
#define auxPid1_iFactor_offset_hex 970
#define auxPid1_dFactor_offset 2420
#define auxPid1_dFactor_offset_hex 974
#define auxPid1_offset_offset 2424
#define auxPid1_offset_offset_hex 978
#define unused_offset 2428
#define le_formulas1_offset 3048
#define le_formulas2_offset 3248
#define le_formulas3_offset 3448

View File

@ -697,8 +697,9 @@ float[MAP_ACCEL_TAPER] mapAccelTaperMult;;"mult", 1, 0, 0.0, 300,
float mapLowValueVoltage;MAP voltage for low point;"v", 1, 0, 0.0, 10, 2
float mapHighValueVoltage;MAP voltage for low point;"v", 1, 0, 0.0, 10, 2
float egoValueShift;EGO value correction;"value", 1, 0, -10.0, 10, 2
int auxPid1DT;Aux Pid #1 dTime;"ms", 1, 0, 0, 3000, 0
pid_s auxPid1;
int[156] unused;
int[155] unused;
end_struct

View File

@ -42,7 +42,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by ConfigDefinition.jar based on rusefi_config.txt Sun Jun 26 11:58:16 EDT 2016
; this section was generated automatically by ConfigDefinition.jar based on rusefi_config.txt Sun Jun 26 12:22:01 EDT 2016
pageSize = 17080
page = 1
@ -573,11 +573,12 @@ page = 1
mapLowValueVoltage = scalar, F32, 2396, "v", 1, 0, 0.0, 10, 2
mapHighValueVoltage = scalar, F32, 2400, "v", 1, 0, 0.0, 10, 2
egoValueShift = scalar, F32, 2404, "value", 1, 0, -10.0, 10, 2
auxPid1_pFactor = scalar, F32, 2408, "value", 1, 0, 0, 1000, 5
auxPid1_iFactor = scalar, F32, 2412, "value", 1, 0, 0, 1000, 5
auxPid1_dFactor = scalar, F32, 2416, "value", 1, 0, 0, 1000, 5
auxPid1_offset = scalar, F32, 2420, "value", 1, 0, 0, 1000, 3
;skipping unused offset 2424
auxPid1DT = scalar, S32, 2408, "ms", 1, 0, 0, 3000, 0
auxPid1_pFactor = scalar, F32, 2412, "value", 1, 0, 0, 1000, 5
auxPid1_iFactor = scalar, F32, 2416, "value", 1, 0, 0, 1000, 5
auxPid1_dFactor = scalar, F32, 2420, "value", 1, 0, 0, 1000, 5
auxPid1_offset = scalar, F32, 2424, "value", 1, 0, 0, 1000, 3
;skipping unused offset 2428
le_formulas1 = array, U08, 3048, [200],"char", 1, 0, 0.0, 3.0, 2
le_formulas2 = array, U08, 3248, [200],"char", 1, 0, 0.0, 3.0, 2
le_formulas3 = array, U08, 3448, [200],"char", 1, 0, 0.0, 3.0, 2
@ -1224,6 +1225,7 @@ fileVersion = { 20160430 }
subMenu = egoSettings, "EGO Sensor Settings"
subMenu = egtInputs, "EGT inputs"
subMenu = energySystems, "Battery and Alternator Settings"
subMenu = auxPidDialog, "Aux PID"
subMenu = speedSensor, "Speed Sensor Settings"
subMenu = tachSettings, "Tachometer output"
subMenu = std_separator
@ -1617,24 +1619,35 @@ cmd_test_idle_valve = "w\x00\x17\x00\x01"
field = "SPI3 MISO", spi3misoPin
field = "SPI3 SCK", spi3sckPin
dialog = auxPidDialog, "Aux PID"
field = "Enabled", activateAuxPid1
field = "FSIO pin #1", fsioPins1
field = "#target based on FSIO map#1"
field = "control period", auxPid1DT, {activateAuxPid1 == 1}
field = "#PID control"
field = "offset", auxPid1_offset, {activateAuxPid1 == 1}
field = "P factor", auxPid1_pFactor, {activateAuxPid1 == 1}
field = "I factor", auxPid1_iFactor, {activateAuxPid1 == 1}
field = "D factor", auxPid1_dFactor, {activateAuxPid1 == 1}
; Engine->Battery & Alternator
dialog = battery, "Battery Settings", yAxis
dialog = batteryDialog, "Battery Settings", yAxis
field = "vBatt ADC input", vbattAdcChannel
field = "Battery Input Divider Coefficient", vbattDividerCoeff
dialog = alternator, "Alternator Settings", yAxis
field = "Enabled", isAlternatorControlEnabled
field = "simple on/off mode", onOffAlternatorLogic
field = "Target", targetVBatt
field = "Pin", alternatorControlPin
field = "Pin Mode", alternatorControlPinMode
field = "Off Above TPS", alternatorOffAboveTps
field = "Verbose", isVerboseAlternator
field = "control period", alternatorDT
field = "simple on/off mode", onOffAlternatorLogic, {isAlternatorControlEnabled == 1}
field = "Target", targetVBatt, {isAlternatorControlEnabled == 1}
field = "Pin", alternatorControlPin, {isAlternatorControlEnabled == 1}
field = "Pin Mode", alternatorControlPinMode, {isAlternatorControlEnabled == 1}
field = "Off Above TPS", alternatorOffAboveTps, {isAlternatorControlEnabled == 1}
field = "Verbose", isVerboseAlternator, {isAlternatorControlEnabled == 1}
field = "control period", alternatorDT, {isAlternatorControlEnabled == 1}
field = "#PID control"
field = "offset", alternatorControl_offset
field = "P factor", alternatorControl_pFactor
field = "I factor", alternatorControl_iFactor
field = "D factor", alternatorControl_dFactor
field = "offset", alternatorControl_offset, {isAlternatorControlEnabled == 1 && onOffAlternatorLogic == 0}
field = "P factor", alternatorControl_pFactor, {isAlternatorControlEnabled == 1 && onOffAlternatorLogic == 0}
field = "I factor", alternatorControl_iFactor, {isAlternatorControlEnabled == 1 && onOffAlternatorLogic == 0}
field = "D factor", alternatorControl_dFactor, {isAlternatorControlEnabled == 1 && onOffAlternatorLogic == 0}
field = "#% duty = Pterm + Iterm + Dterm + offset%"
@ -1649,7 +1662,7 @@ cmd_test_idle_valve = "w\x00\x17\x00\x01"
dialog = energySystems, "Battery and Alternator Settings", yAxis
panel = battery
panel = batteryDialog
panel = alternator
; Engine->Speed Sensor

View File

@ -1,6 +1,6 @@
package com.rusefi.config;
// this file was generated automatically by ConfigDefinition.jar based on rusefi_config.txt Sat Jun 25 15:31:56 EDT 2016
// this file was generated automatically by ConfigDefinition.jar based on rusefi_config.txt Sun Jun 26 12:22:01 EDT 2016
public class Fields {
public static final int LE_COMMAND_LENGTH = 200;
public static final int FSIO_ADC_COUNT = 4;
@ -49,8 +49,8 @@ public class Fields {
public static final int injector_battLagCorr_offset_hex = 30;
public static final int directSelfStimulation_offset = 80;
public static final int directSelfStimulation_offset_hex = 50;
public static final int issue_294_1_offset = 80;
public static final int issue_294_1_offset_hex = 50;
public static final int activateAuxPid1_offset = 80;
public static final int activateAuxPid1_offset_hex = 50;
public static final int issue_294_2_offset = 80;
public static final int issue_294_2_offset_hex = 50;
public static final int issue_294_3_offset = 80;
@ -830,8 +830,17 @@ public class Fields {
public static final int mapHighValueVoltage_offset_hex = 960;
public static final int egoValueShift_offset = 2404;
public static final int egoValueShift_offset_hex = 964;
public static final int unused_offset = 2408;
public static final int unused_offset_hex = 968;
public static final int auxPid1DT_offset = 2408;
public static final int auxPid1DT_offset_hex = 968;
public static final int auxPid1_offset = 2412;
public static final int auxPid1_pFactor_offset = 2412;
public static final int auxPid1_iFactor_offset = 2416;
public static final int auxPid1_iFactor_offset_hex = 970;
public static final int auxPid1_dFactor_offset = 2420;
public static final int auxPid1_dFactor_offset_hex = 974;
public static final int auxPid1_offset_offset = 2424;
public static final int auxPid1_offset_offset_hex = 978;
public static final int unused_offset = 2428;
public static final int le_formulas1_offset = 3048;
public static final int le_formulas2_offset = 3248;
public static final int le_formulas3_offset = 3448;
@ -915,7 +924,7 @@ public class Fields {
public static final Field INJECTOR_FLOW = Field.create("INJECTOR_FLOW", 8, FieldType.FLOAT);
public static final Field INJECTOR_LAG = Field.create("INJECTOR_LAG", 12, FieldType.FLOAT);
public static final Field DIRECTSELFSTIMULATION = Field.create("DIRECTSELFSTIMULATION", 80, FieldType.BIT, 0);
public static final Field ISSUE_294_1 = Field.create("ISSUE_294_1", 80, FieldType.BIT, 1);
public static final Field ACTIVATEAUXPID1 = Field.create("ACTIVATEAUXPID1", 80, FieldType.BIT, 1);
public static final Field ISSUE_294_2 = Field.create("ISSUE_294_2", 80, FieldType.BIT, 2);
public static final Field ISSUE_294_3 = Field.create("ISSUE_294_3", 80, FieldType.BIT, 3);
public static final Field ISSUE_294_4 = Field.create("ISSUE_294_4", 80, FieldType.BIT, 4);
@ -1421,6 +1430,11 @@ public class Fields {
public static final Field MAPLOWVALUEVOLTAGE = Field.create("MAPLOWVALUEVOLTAGE", 2396, FieldType.FLOAT);
public static final Field MAPHIGHVALUEVOLTAGE = Field.create("MAPHIGHVALUEVOLTAGE", 2400, FieldType.FLOAT);
public static final Field EGOVALUESHIFT = Field.create("EGOVALUESHIFT", 2404, FieldType.FLOAT);
public static final Field AUXPID1DT = Field.create("AUXPID1DT", 2408, FieldType.INT);
public static final Field AUXPID1_PFACTOR = Field.create("AUXPID1_PFACTOR", 2412, FieldType.FLOAT);
public static final Field AUXPID1_IFACTOR = Field.create("AUXPID1_IFACTOR", 2416, FieldType.FLOAT);
public static final Field AUXPID1_DFACTOR = Field.create("AUXPID1_DFACTOR", 2420, FieldType.FLOAT);
public static final Field AUXPID1_OFFSET = Field.create("AUXPID1_OFFSET", 2424, FieldType.FLOAT);
public static final Field LE_FORMULAS1 = Field.create("LE_FORMULAS1", 3048, FieldType.INT);
public static final Field LE_FORMULAS2 = Field.create("LE_FORMULAS2", 3248, FieldType.INT);
public static final Field LE_FORMULAS3 = Field.create("LE_FORMULAS3", 3448, FieldType.INT);