rusefi
/
rusefi-1
mirror of https://github.com/rusefi/rusefi-1.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Auto-generated configs and docs

This commit is contained in:
GitHub build-firmware Action 2022-06-18 18:53:00 +00:00
parent ff477f59d0
commit cbd85f54c4
74 changed files with 326 additions and 393 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
firmware/config/boards/hellen/cypress/config/controllers/algo/engine_configuration_generated_structures.h
View File

@ -1,4 +1,4 @@
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Fri Jun 03 05:20:52 UTC 2022
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Sat Jun 18 18:50:37 UTC 2022
// by class com.rusefi.output.CHeaderConsumer
// begin
#pragma once
@ -2148,6 +2148,7 @@ struct engine_configuration_s {
offset 940 bit 12 */
bool enableSoftwareKnock : 1 {};
/**
* Verbose info in console below engineSnifferRpmThreshold
* enable vvt_details
offset 940 bit 13 */
bool verboseVVTDecoding : 1 {};
@ -2441,9 +2442,8 @@ struct engine_configuration_s {
offset 1340 bit 4 */
bool boardUseTempPullUp : 1 {};
/**
* This options enables data for 'engine sniffer' tab in console, which comes at some CPU price
offset 1340 bit 5 */
bool isEngineChartEnabled : 1 {};
bool unused234234234 : 1 {};
/**
* Sometimes we have a performance issue while printing error
offset 1340 bit 6 */
@ -2608,6 +2608,7 @@ struct engine_configuration_s {
offset 1352 bit 9 */
bool useSeparateVeForIdle : 1 {};
/**
* Verbose info in console below engineSnifferRpmThreshold
* enable trigger_details
offset 1352 bit 10 */
bool verboseTriggerSynchDetails : 1 {};
@ -4942,4 +4943,4 @@ struct persistent_config_s {
static_assert(sizeof(persistent_config_s) == 21352);
// end
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Fri Jun 03 05:20:52 UTC 2022
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Sat Jun 18 18:50:37 UTC 2022

6
firmware/config/boards/hellen/cypress/config/controllers/algo/rusefi_generated.h
View File

@ -1533,7 +1533,6 @@
#define isCJ125Verbose_offset 100
#define isCylinderCleanupEnabled_offset 1352
#define isDoubleSolenoidIdle_offset 100
#define isEngineChartEnabled_offset 1340
#define isEngineControlEnabled_offset 744
#define isFasterEngineSpinUpEnabled_offset 744
#define isForcedInduction_offset 100
@ -1925,7 +1924,7 @@
#define show_Frankenso_presets true
#define show_test_presets true
#define showHumanReadableWarning_offset 940
#define SIGNATURE_HASH 778947041
#define SIGNATURE_HASH 182048651
#define silentTriggerError_offset 1340
#define skippedWheelOnCam_offset 1340
#define slowAdcAlpha_offset 1580
@ -2477,7 +2476,7 @@
#define ts_show_tunerstudio_port true
#define ts_show_vr_threshold_2 true
#define ts_show_vr_threshold_all true
#define TS_SIGNATURE "rusEFI 2022.06.18.hellen_cypress.778947041"
#define TS_SIGNATURE "rusEFI 2022.06.18.hellen_cypress.182048651"
#define TS_SINGLE_WRITE_COMMAND 'W'
#define TS_SINGLE_WRITE_COMMAND_char W
#define TS_TEST_COMMAND 't'
@ -2521,6 +2520,7 @@
#define unused1740b0_offset 1608
#define unused1740b1_offset 1608
#define unused1740b2_offset 1608
#define unused234234234_offset 1340
#define unused4080_offset 3029
#define unused460_offset 460
#define unused688_offset 688

9
firmware/config/boards/kinetis/config/controllers/algo/engine_configuration_generated_structures.h
View File

@ -1,4 +1,4 @@
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Fri Jun 03 05:20:51 UTC 2022
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Sat Jun 18 18:50:35 UTC 2022
// by class com.rusefi.output.CHeaderConsumer
// begin
#pragma once
@ -2154,6 +2154,7 @@ struct engine_configuration_s {
offset 940 bit 12 */
bool enableSoftwareKnock : 1 {};
/**
* Verbose info in console below engineSnifferRpmThreshold
* enable vvt_details
offset 940 bit 13 */
bool verboseVVTDecoding : 1 {};
@ -2447,9 +2448,8 @@ struct engine_configuration_s {
offset 1340 bit 4 */
bool boardUseTempPullUp : 1 {};
/**
* This options enables data for 'engine sniffer' tab in console, which comes at some CPU price
offset 1340 bit 5 */
bool isEngineChartEnabled : 1 {};
bool unused234234234 : 1 {};
/**
* Sometimes we have a performance issue while printing error
offset 1340 bit 6 */
@ -2614,6 +2614,7 @@ struct engine_configuration_s {
offset 1352 bit 9 */
bool useSeparateVeForIdle : 1 {};
/**
* Verbose info in console below engineSnifferRpmThreshold
* enable trigger_details
offset 1352 bit 10 */
bool verboseTriggerSynchDetails : 1 {};
@ -4960,4 +4961,4 @@ struct persistent_config_s {
static_assert(sizeof(persistent_config_s) == 21324);
// end
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Fri Jun 03 05:20:51 UTC 2022
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Sat Jun 18 18:50:35 UTC 2022

6
firmware/config/boards/kinetis/config/controllers/algo/rusefi_generated.h
View File

@ -1519,7 +1519,6 @@
#define isCJ125Verbose_offset 100
#define isCylinderCleanupEnabled_offset 1352
#define isDoubleSolenoidIdle_offset 100
#define isEngineChartEnabled_offset 1340
#define isEngineControlEnabled_offset 744
#define isFasterEngineSpinUpEnabled_offset 744
#define isForcedInduction_offset 100
@ -1911,7 +1910,7 @@
#define show_Frankenso_presets true
#define show_test_presets true
#define showHumanReadableWarning_offset 940
#define SIGNATURE_HASH 1882107500
#define SIGNATURE_HASH 1419423750
#define silentTriggerError_offset 1340
#define skippedWheelOnCam_offset 1340
#define slowAdcAlpha_offset 1580
@ -2463,7 +2462,7 @@
#define ts_show_tunerstudio_port true
#define ts_show_vr_threshold_2 true
#define ts_show_vr_threshold_all true
#define TS_SIGNATURE "rusEFI 2022.06.18.kin.1882107500"
#define TS_SIGNATURE "rusEFI 2022.06.18.kin.1419423750"
#define TS_SINGLE_WRITE_COMMAND 'W'
#define TS_SINGLE_WRITE_COMMAND_char W
#define TS_TEST_COMMAND 't'
@ -2507,6 +2506,7 @@
#define unused1740b0_offset 1608
#define unused1740b1_offset 1608
#define unused1740b2_offset 1608
#define unused234234234_offset 1340
#define unused4080_offset 3001
#define unused460_offset 460
#define unused688_offset 688

9
firmware/config/boards/subaru_eg33/config/controllers/algo/engine_configuration_generated_structures.h
View File

@ -1,4 +1,4 @@
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on config/boards/subaru_eg33/config/gen_subaru_config.sh integration/rusefi_config.txt Fri Jun 03 05:20:54 UTC 2022
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on config/boards/subaru_eg33/config/gen_subaru_config.sh integration/rusefi_config.txt Sat Jun 18 18:50:38 UTC 2022
// by class com.rusefi.output.CHeaderConsumer
// begin
#pragma once
@ -2148,6 +2148,7 @@ struct engine_configuration_s {
offset 940 bit 12 */
bool enableSoftwareKnock : 1 {};
/**
* Verbose info in console below engineSnifferRpmThreshold
* enable vvt_details
offset 940 bit 13 */
bool verboseVVTDecoding : 1 {};
@ -2441,9 +2442,8 @@ struct engine_configuration_s {
offset 1340 bit 4 */
bool boardUseTempPullUp : 1 {};
/**
* This options enables data for 'engine sniffer' tab in console, which comes at some CPU price
offset 1340 bit 5 */
bool isEngineChartEnabled : 1 {};
bool unused234234234 : 1 {};
/**
* Sometimes we have a performance issue while printing error
offset 1340 bit 6 */
@ -2608,6 +2608,7 @@ struct engine_configuration_s {
offset 1352 bit 9 */
bool useSeparateVeForIdle : 1 {};
/**
* Verbose info in console below engineSnifferRpmThreshold
* enable trigger_details
offset 1352 bit 10 */
bool verboseTriggerSynchDetails : 1 {};
@ -4942,4 +4943,4 @@ struct persistent_config_s {
static_assert(sizeof(persistent_config_s) == 21352);
// end
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on config/boards/subaru_eg33/config/gen_subaru_config.sh integration/rusefi_config.txt Fri Jun 03 05:20:54 UTC 2022
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on config/boards/subaru_eg33/config/gen_subaru_config.sh integration/rusefi_config.txt Sat Jun 18 18:50:38 UTC 2022

6
firmware/config/boards/subaru_eg33/config/controllers/algo/rusefi_generated.h
View File

@ -1497,7 +1497,6 @@
#define isCJ125Verbose_offset 100
#define isCylinderCleanupEnabled_offset 1352
#define isDoubleSolenoidIdle_offset 100
#define isEngineChartEnabled_offset 1340
#define isEngineControlEnabled_offset 744
#define isFasterEngineSpinUpEnabled_offset 744
#define isForcedInduction_offset 100
@ -1891,7 +1890,7 @@
#define show_Proteus_presets false
#define show_test_presets false
#define showHumanReadableWarning_offset 940
#define SIGNATURE_HASH 1615887961
#define SIGNATURE_HASH 1155817523
#define silentTriggerError_offset 1340
#define skippedWheelOnCam_offset 1340
#define slowAdcAlpha_offset 1580
@ -2444,7 +2443,7 @@
#define ts_show_tunerstudio_port false
#define ts_show_vr_threshold_2 true
#define ts_show_vr_threshold_all true
#define TS_SIGNATURE "rusEFI 2022.06.18.subaru_eg33_f7.1615887961"
#define TS_SIGNATURE "rusEFI 2022.06.18.subaru_eg33_f7.1155817523"
#define TS_SINGLE_WRITE_COMMAND 'W'
#define TS_SINGLE_WRITE_COMMAND_char W
#define TS_TEST_COMMAND 't'
@ -2488,6 +2487,7 @@
#define unused1740b0_offset 1608
#define unused1740b1_offset 1608
#define unused1740b2_offset 1608
#define unused234234234_offset 1340
#define unused4080_offset 3029
#define unused460_offset 460
#define unused688_offset 688

9
firmware/controllers/generated/engine_configuration_generated_structures.h
View File

@ -1,4 +1,4 @@
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jun 03 05:20:55 UTC 2022
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 18:50:40 UTC 2022
// by class com.rusefi.output.CHeaderConsumer
// begin
#pragma once
@ -2148,6 +2148,7 @@ struct engine_configuration_s {
offset 940 bit 12 */
bool enableSoftwareKnock : 1 {};
/**
* Verbose info in console below engineSnifferRpmThreshold
* enable vvt_details
offset 940 bit 13 */
bool verboseVVTDecoding : 1 {};
@ -2441,9 +2442,8 @@ struct engine_configuration_s {
offset 1340 bit 4 */
bool boardUseTempPullUp : 1 {};
/**
* This options enables data for 'engine sniffer' tab in console, which comes at some CPU price
offset 1340 bit 5 */
bool isEngineChartEnabled : 1 {};
bool unused234234234 : 1 {};
/**
* Sometimes we have a performance issue while printing error
offset 1340 bit 6 */
@ -2608,6 +2608,7 @@ struct engine_configuration_s {
offset 1352 bit 9 */
bool useSeparateVeForIdle : 1 {};
/**
* Verbose info in console below engineSnifferRpmThreshold
* enable trigger_details
offset 1352 bit 10 */
bool verboseTriggerSynchDetails : 1 {};
@ -4942,4 +4943,4 @@ struct persistent_config_s {
static_assert(sizeof(persistent_config_s) == 21352);
// end
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jun 03 05:20:55 UTC 2022
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 18:50:40 UTC 2022

6
firmware/controllers/generated/rusefi_generated.h
View File

@ -1533,7 +1533,6 @@
#define isCJ125Verbose_offset 100
#define isCylinderCleanupEnabled_offset 1352
#define isDoubleSolenoidIdle_offset 100
#define isEngineChartEnabled_offset 1340
#define isEngineControlEnabled_offset 744
#define isFasterEngineSpinUpEnabled_offset 744
#define isForcedInduction_offset 100
@ -1925,7 +1924,7 @@
#define show_Frankenso_presets true
#define show_test_presets true
#define showHumanReadableWarning_offset 940
#define SIGNATURE_HASH 1799456747
#define SIGNATURE_HASH 1341495681
#define silentTriggerError_offset 1340
#define skippedWheelOnCam_offset 1340
#define slowAdcAlpha_offset 1580
@ -2477,7 +2476,7 @@
#define ts_show_tunerstudio_port true
#define ts_show_vr_threshold_2 true
#define ts_show_vr_threshold_all true
#define TS_SIGNATURE "rusEFI 2022.06.18.all.1799456747"
#define TS_SIGNATURE "rusEFI 2022.06.18.all.1341495681"
#define TS_SINGLE_WRITE_COMMAND 'W'
#define TS_SINGLE_WRITE_COMMAND_char W
#define TS_TEST_COMMAND 't'
@ -2521,6 +2520,7 @@
#define unused1740b0_offset 1608
#define unused1740b1_offset 1608
#define unused1740b2_offset 1608
#define unused234234234_offset 1340
#define unused4080_offset 3029
#define unused460_offset 460
#define unused688_offset 688

4
firmware/controllers/generated/signature_48way.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 2087096228
#define TS_SIGNATURE "rusEFI 2022.06.18.48way.2087096228"
#define SIGNATURE_HASH 1490194894
#define TS_SIGNATURE "rusEFI 2022.06.18.48way.1490194894"

4
firmware/controllers/generated/signature_all.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 1799456747
#define TS_SIGNATURE "rusEFI 2022.06.18.all.1799456747"
#define SIGNATURE_HASH 1341495681
#define TS_SIGNATURE "rusEFI 2022.06.18.all.1341495681"

4
firmware/controllers/generated/signature_alphax-2chan.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 1498618503
#define TS_SIGNATURE "rusEFI 2022.06.18.alphax-2chan.1498618503"
#define SIGNATURE_HASH 2112292077
#define TS_SIGNATURE "rusEFI 2022.06.18.alphax-2chan.2112292077"

4
firmware/controllers/generated/signature_alphax-4chan.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 1221421224
#define TS_SIGNATURE "rusEFI 2022.06.18.alphax-4chan.1221421224"
#define SIGNATURE_HASH 1819899586
#define TS_SIGNATURE "rusEFI 2022.06.18.alphax-4chan.1819899586"

4
firmware/controllers/generated/signature_atlas.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 2005627596
#define TS_SIGNATURE "rusEFI 2022.06.18.atlas.2005627596"
#define SIGNATURE_HASH 1396665510
#define TS_SIGNATURE "rusEFI 2022.06.18.atlas.1396665510"

4
firmware/controllers/generated/signature_core8.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 2645415442
#define TS_SIGNATURE "rusEFI 2022.06.18.core8.2645415442"
#define SIGNATURE_HASH 3105474680
#define TS_SIGNATURE "rusEFI 2022.06.18.core8.3105474680"

4
firmware/controllers/generated/signature_f407-discovery.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 1799456747
#define TS_SIGNATURE "rusEFI 2022.06.18.f407-discovery.1799456747"
#define SIGNATURE_HASH 1341495681
#define TS_SIGNATURE "rusEFI 2022.06.18.f407-discovery.1341495681"

4
firmware/controllers/generated/signature_f429-discovery.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 1799456747
#define TS_SIGNATURE "rusEFI 2022.06.18.f429-discovery.1799456747"
#define SIGNATURE_HASH 1341495681
#define TS_SIGNATURE "rusEFI 2022.06.18.f429-discovery.1341495681"

4
firmware/controllers/generated/signature_frankenso_na6.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 690846511
#define TS_SIGNATURE "rusEFI 2022.06.18.frankenso_na6.690846511"
#define SIGNATURE_HASH 228156741
#define TS_SIGNATURE "rusEFI 2022.06.18.frankenso_na6.228156741"

4
firmware/controllers/generated/signature_harley81.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 531486868
#define TS_SIGNATURE "rusEFI 2022.06.18.harley81.531486868"
#define SIGNATURE_HASH 991545086
#define TS_SIGNATURE "rusEFI 2022.06.18.harley81.991545086"

4
firmware/controllers/generated/signature_hellen-gm-e67.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 1246664334
#define TS_SIGNATURE "rusEFI 2022.06.18.hellen-gm-e67.1246664334"
#define SIGNATURE_HASH 1861912804
#define TS_SIGNATURE "rusEFI 2022.06.18.hellen-gm-e67.1861912804"

4
firmware/controllers/generated/signature_hellen-nb1.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 2999629351
#define TS_SIGNATURE "rusEFI 2022.06.18.hellen-nb1.2999629351"
#define SIGNATURE_HASH 2524883021
#define TS_SIGNATURE "rusEFI 2022.06.18.hellen-nb1.2524883021"

4
firmware/controllers/generated/signature_hellen121nissan.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 3818864385
#define TS_SIGNATURE "rusEFI 2022.06.18.hellen121nissan.3818864385"
#define SIGNATURE_HASH 3341492587
#define TS_SIGNATURE "rusEFI 2022.06.18.hellen121nissan.3341492587"

4
firmware/controllers/generated/signature_hellen121vag.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 459293841
#define TS_SIGNATURE "rusEFI 2022.06.18.hellen121vag.459293841"
#define SIGNATURE_HASH 1070881531
#define TS_SIGNATURE "rusEFI 2022.06.18.hellen121vag.1070881531"

4
firmware/controllers/generated/signature_hellen128.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 90856250
#define TS_SIGNATURE "rusEFI 2022.06.18.hellen128.90856250"
#define SIGNATURE_HASH 568214864
#define TS_SIGNATURE "rusEFI 2022.06.18.hellen128.568214864"

4
firmware/controllers/generated/signature_hellen154hyundai.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 4077843823
#define TS_SIGNATURE "rusEFI 2022.06.18.hellen154hyundai.4077843823"
#define SIGNATURE_HASH 3619351301
#define TS_SIGNATURE "rusEFI 2022.06.18.hellen154hyundai.3619351301"

4
firmware/controllers/generated/signature_hellen72.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 2575216367
#define TS_SIGNATURE "rusEFI 2022.06.18.hellen72.2575216367"
#define SIGNATURE_HASH 3184177285
#define TS_SIGNATURE "rusEFI 2022.06.18.hellen72.3184177285"

4
firmware/controllers/generated/signature_hellen81.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 1240752097
#define TS_SIGNATURE "rusEFI 2022.06.18.hellen81.1240752097"
#define SIGNATURE_HASH 1832927627
#define TS_SIGNATURE "rusEFI 2022.06.18.hellen81.1832927627"

4
firmware/controllers/generated/signature_hellen88bmw.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 936788303
#define TS_SIGNATURE "rusEFI 2022.06.18.hellen88bmw.936788303"
#define SIGNATURE_HASH 325213989
#define TS_SIGNATURE "rusEFI 2022.06.18.hellen88bmw.325213989"

4
firmware/controllers/generated/signature_hellenNA6.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 3922359947
#define TS_SIGNATURE "rusEFI 2022.06.18.hellenNA6.3922359947"
#define SIGNATURE_HASH 3447613665
#define TS_SIGNATURE "rusEFI 2022.06.18.hellenNA6.3447613665"

4
firmware/controllers/generated/signature_hellenNA8_96.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 3355763644
#define TS_SIGNATURE "rusEFI 2022.06.18.hellenNA8_96.3355763644"
#define SIGNATURE_HASH 3971022294
#define TS_SIGNATURE "rusEFI 2022.06.18.hellenNA8_96.3971022294"

4
firmware/controllers/generated/signature_hellen_cypress.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat null
//
#define SIGNATURE_HASH 778947041
#define TS_SIGNATURE "rusEFI 2022.06.18.hellen_cypress.778947041"
#define SIGNATURE_HASH 182048651
#define TS_SIGNATURE "rusEFI 2022.06.18.hellen_cypress.182048651"

4
firmware/controllers/generated/signature_kin.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on kinetis_gen_config.bat null
//
#define SIGNATURE_HASH 1882107500
#define TS_SIGNATURE "rusEFI 2022.06.18.kin.1882107500"
#define SIGNATURE_HASH 1419423750
#define TS_SIGNATURE "rusEFI 2022.06.18.kin.1419423750"

4
firmware/controllers/generated/signature_mre_f4.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 252902500
#define TS_SIGNATURE "rusEFI 2022.06.18.mre_f4.252902500"
#define SIGNATURE_HASH 732357134
#define TS_SIGNATURE "rusEFI 2022.06.18.mre_f4.732357134"

4
firmware/controllers/generated/signature_mre_f7.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 252902500
#define TS_SIGNATURE "rusEFI 2022.06.18.mre_f7.252902500"
#define SIGNATURE_HASH 732357134
#define TS_SIGNATURE "rusEFI 2022.06.18.mre_f7.732357134"

4
firmware/controllers/generated/signature_prometheus_405.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 1001086477
#define TS_SIGNATURE "rusEFI 2022.06.18.prometheus_405.1001086477"
#define SIGNATURE_HASH 522141799
#define TS_SIGNATURE "rusEFI 2022.06.18.prometheus_405.522141799"

4
firmware/controllers/generated/signature_prometheus_469.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 1001086477
#define TS_SIGNATURE "rusEFI 2022.06.18.prometheus_469.1001086477"
#define SIGNATURE_HASH 522141799
#define TS_SIGNATURE "rusEFI 2022.06.18.prometheus_469.522141799"

4
firmware/controllers/generated/signature_proteus_f4.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 3058598599
#define TS_SIGNATURE "rusEFI 2022.06.18.proteus_f4.3058598599"
#define SIGNATURE_HASH 2465897645
#define TS_SIGNATURE "rusEFI 2022.06.18.proteus_f4.2465897645"

4
firmware/controllers/generated/signature_proteus_f7.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 3058598599
#define TS_SIGNATURE "rusEFI 2022.06.18.proteus_f7.3058598599"
#define SIGNATURE_HASH 2465897645
#define TS_SIGNATURE "rusEFI 2022.06.18.proteus_f7.2465897645"

4
firmware/controllers/generated/signature_proteus_h7.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 3058598599
#define TS_SIGNATURE "rusEFI 2022.06.18.proteus_h7.3058598599"
#define SIGNATURE_HASH 2465897645
#define TS_SIGNATURE "rusEFI 2022.06.18.proteus_h7.2465897645"

4
firmware/controllers/generated/signature_subaru_eg33_f7.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on config/boards/subaru_eg33/config/gen_subaru_config.sh null
//
#define SIGNATURE_HASH 1615887961
#define TS_SIGNATURE "rusEFI 2022.06.18.subaru_eg33_f7.1615887961"
#define SIGNATURE_HASH 1155817523
#define TS_SIGNATURE "rusEFI 2022.06.18.subaru_eg33_f7.1155817523"

4
firmware/controllers/generated/signature_tdg-pdm8.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 3242805695
#define TS_SIGNATURE "rusEFI 2022.06.18.tdg-pdm8.3242805695"
#define SIGNATURE_HASH 3858585557
#define TS_SIGNATURE "rusEFI 2022.06.18.tdg-pdm8.3858585557"

7
firmware/controllers/lua/generated/value_lookup_generated.cpp
View File

@ -533,8 +533,6 @@ float getConfigValueByName(const char *name) {
return engineConfiguration->boardUseTachPullUp;
if (strEqualCaseInsensitive(name, "boardUseTempPullUp"))
return engineConfiguration->boardUseTempPullUp;
if (strEqualCaseInsensitive(name, "isEngineChartEnabled"))
return engineConfiguration->isEngineChartEnabled;
if (strEqualCaseInsensitive(name, "silentTriggerError"))
return engineConfiguration->silentTriggerError;
if (strEqualCaseInsensitive(name, "useLinearCltSensor"))
@ -1777,11 +1775,6 @@ void setConfigValueByName(const char *name, float value) {
engineConfiguration->boardUseTempPullUp = (int)value;
return;
}
if (strEqualCaseInsensitive(name, "isEngineChartEnabled"))
{
engineConfiguration->isEngineChartEnabled = (int)value;
return;
}
if (strEqualCaseInsensitive(name, "silentTriggerError"))
{
engineConfiguration->silentTriggerError = (int)value;

16
firmware/tunerstudio/generated/rusefi.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.06.18.all.1799456747"
signature = "rusEFI 2022.06.18.all.1341495681"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature = "rusEFI 2022.06.18.all.1799456747" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.06.18.all.1341495681" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 16:10:53 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 18:50:34 UTC 2022
pageSize = 21352
page = 1
@ -593,7 +593,7 @@ fuelClosedLoopCorrectionEnabled = bits, U32, 1340, [1:1], "false", "true"
isVerboseIAC = bits, U32, 1340, [2:2], "false", "true"
boardUseTachPullUp = bits, U32, 1340, [3:3], "5v", "12v"
boardUseTempPullUp = bits, U32, 1340, [4:4], "Piggyback Mode", "With Pull Ups"
isEngineChartEnabled = bits, U32, 1340, [5:5], "false", "true"
unused234234234 = bits, U32, 1340, [5:5], "false", "true"
silentTriggerError = bits, U32, 1340, [6:6], "false", "true"
useLinearCltSensor = bits, U32, 1340, [7:7], "false", "true"
canReadEnabled = bits, U32, 1340, [8:8], "false", "true"
@ -1579,7 +1579,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve"
enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration."
stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor."
verboseVVTDecoding = "enable vvt_details"
verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold"
invertCamVVTSignal = "get invertCamVVTSignal"
consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only"
useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss"
@ -1639,7 +1639,6 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
gpPwmNote4 = "gpPwmNote 4"
fuelClosedLoopCorrectionEnabled = "Enables lambda sensor closed loop feedback for fuelling."
isVerboseIAC = "Print details into rusEFI console"
isEngineChartEnabled = "This options enables data for 'engine sniffer' tab in console, which comes at some CPU price"
silentTriggerError = "Sometimes we have a performance issue while printing error"
canReadEnabled = "enable can_read/disable can_read"
canWriteEnabled = "enable can_write/disable can_write"
@ -1661,7 +1660,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
verboseTriggerSynchDetails = "enable trigger_details"
verboseTriggerSynchDetails = "Verbose info in console below engineSnifferRpmThreshold"
isManualSpinningMode = "Usually if we have no trigger events that means engine is stopped"
twoWireBatchInjection = "This is needed if your coils are individually wired and you wish to use batch injection."
useOnlyRisingEdgeForTrigger = "VR sensors are only precise on rising front"
@ -6786,8 +6785,7 @@ dialog = electronic_throttleDialog, "electronic_throttle"
dialog = monitoringSettings, "rusEFI Console Settings"
field = "Sensor Sniffer", sensorChartMode
field = " Threshold", sensorSnifferRpmThreshold
field = "Engine Sniffer", isEngineChartEnabled
field = " Threshold", engineSnifferRpmThreshold
field = "Engine Sniffer Threshold", engineSnifferRpmThreshold
dialog = generalSettings, "General"
field = "!https://rusefi.com/s/fuel"

16
firmware/tunerstudio/generated/rusefi_48way.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.06.18.48way.2087096228"
signature = "rusEFI 2022.06.18.48way.1490194894"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature = "rusEFI 2022.06.18.48way.2087096228" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.06.18.48way.1490194894" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 16:10:36 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 18:50:16 UTC 2022
pageSize = 21352
page = 1
@ -593,7 +593,7 @@ fuelClosedLoopCorrectionEnabled = bits, U32, 1340, [1:1], "false", "true"
isVerboseIAC = bits, U32, 1340, [2:2], "false", "true"
boardUseTachPullUp = bits, U32, 1340, [3:3], "5v", "12v"
boardUseTempPullUp = bits, U32, 1340, [4:4], "Piggyback Mode", "With Pull Ups"
isEngineChartEnabled = bits, U32, 1340, [5:5], "false", "true"
unused234234234 = bits, U32, 1340, [5:5], "false", "true"
silentTriggerError = bits, U32, 1340, [6:6], "false", "true"
useLinearCltSensor = bits, U32, 1340, [7:7], "false", "true"
canReadEnabled = bits, U32, 1340, [8:8], "false", "true"
@ -1579,7 +1579,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve"
enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration."
stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor."
verboseVVTDecoding = "enable vvt_details"
verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold"
invertCamVVTSignal = "get invertCamVVTSignal"
consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only"
useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss"
@ -1639,7 +1639,6 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
gpPwmNote4 = "gpPwmNote 4"
fuelClosedLoopCorrectionEnabled = "Enables lambda sensor closed loop feedback for fuelling."
isVerboseIAC = "Print details into rusEFI console"
isEngineChartEnabled = "This options enables data for 'engine sniffer' tab in console, which comes at some CPU price"
silentTriggerError = "Sometimes we have a performance issue while printing error"
canReadEnabled = "enable can_read/disable can_read"
canWriteEnabled = "enable can_write/disable can_write"
@ -1661,7 +1660,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
verboseTriggerSynchDetails = "enable trigger_details"
verboseTriggerSynchDetails = "Verbose info in console below engineSnifferRpmThreshold"
isManualSpinningMode = "Usually if we have no trigger events that means engine is stopped"
twoWireBatchInjection = "This is needed if your coils are individually wired and you wish to use batch injection."
useOnlyRisingEdgeForTrigger = "VR sensors are only precise on rising front"
@ -6780,8 +6779,7 @@ dialog = electronic_throttleDialog, "electronic_throttle"
dialog = monitoringSettings, "rusEFI Console Settings"
field = "Sensor Sniffer", sensorChartMode
field = " Threshold", sensorSnifferRpmThreshold
field = "Engine Sniffer", isEngineChartEnabled
field = " Threshold", engineSnifferRpmThreshold
field = "Engine Sniffer Threshold", engineSnifferRpmThreshold
dialog = generalSettings, "General"
field = "!https://rusefi.com/s/fuel"

16
firmware/tunerstudio/generated/rusefi_alphax-2chan.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.06.18.alphax-2chan.1498618503"
signature = "rusEFI 2022.06.18.alphax-2chan.2112292077"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature = "rusEFI 2022.06.18.alphax-2chan.1498618503" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.06.18.alphax-2chan.2112292077" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 16:10:09 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 18:49:48 UTC 2022
pageSize = 21352
page = 1
@ -593,7 +593,7 @@ fuelClosedLoopCorrectionEnabled = bits, U32, 1340, [1:1], "false", "true"
isVerboseIAC = bits, U32, 1340, [2:2], "false", "true"
boardUseTachPullUp = bits, U32, 1340, [3:3], "5v", "12v"
boardUseTempPullUp = bits, U32, 1340, [4:4], "Piggyback Mode", "With Pull Ups"
isEngineChartEnabled = bits, U32, 1340, [5:5], "false", "true"
unused234234234 = bits, U32, 1340, [5:5], "false", "true"
silentTriggerError = bits, U32, 1340, [6:6], "false", "true"
useLinearCltSensor = bits, U32, 1340, [7:7], "false", "true"
canReadEnabled = bits, U32, 1340, [8:8], "false", "true"
@ -1579,7 +1579,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve"
enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration."
stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor."
verboseVVTDecoding = "enable vvt_details"
verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold"
invertCamVVTSignal = "get invertCamVVTSignal"
consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only"
useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss"
@ -1639,7 +1639,6 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
gpPwmNote4 = "gpPwmNote 4"
fuelClosedLoopCorrectionEnabled = "Enables lambda sensor closed loop feedback for fuelling."
isVerboseIAC = "Print details into rusEFI console"
isEngineChartEnabled = "This options enables data for 'engine sniffer' tab in console, which comes at some CPU price"
silentTriggerError = "Sometimes we have a performance issue while printing error"
canReadEnabled = "enable can_read/disable can_read"
canWriteEnabled = "enable can_write/disable can_write"
@ -1661,7 +1660,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
verboseTriggerSynchDetails = "enable trigger_details"
verboseTriggerSynchDetails = "Verbose info in console below engineSnifferRpmThreshold"
isManualSpinningMode = "Usually if we have no trigger events that means engine is stopped"
twoWireBatchInjection = "This is needed if your coils are individually wired and you wish to use batch injection."
useOnlyRisingEdgeForTrigger = "VR sensors are only precise on rising front"
@ -6760,8 +6759,7 @@ dialog = electronic_throttleDialog, "electronic_throttle"
dialog = monitoringSettings, "rusEFI Console Settings"
field = "Sensor Sniffer", sensorChartMode
field = " Threshold", sensorSnifferRpmThreshold
field = "Engine Sniffer", isEngineChartEnabled
field = " Threshold", engineSnifferRpmThreshold
field = "Engine Sniffer Threshold", engineSnifferRpmThreshold
dialog = generalSettings, "General"
field = "!https://rusefi.com/s/fuel"

16
firmware/tunerstudio/generated/rusefi_alphax-4chan.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.06.18.alphax-4chan.1221421224"
signature = "rusEFI 2022.06.18.alphax-4chan.1819899586"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature = "rusEFI 2022.06.18.alphax-4chan.1221421224" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.06.18.alphax-4chan.1819899586" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 16:10:10 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 18:49:50 UTC 2022
pageSize = 21352
page = 1
@ -593,7 +593,7 @@ fuelClosedLoopCorrectionEnabled = bits, U32, 1340, [1:1], "false", "true"
isVerboseIAC = bits, U32, 1340, [2:2], "false", "true"
boardUseTachPullUp = bits, U32, 1340, [3:3], "5v", "12v"
boardUseTempPullUp = bits, U32, 1340, [4:4], "Piggyback Mode", "With Pull Ups"
isEngineChartEnabled = bits, U32, 1340, [5:5], "false", "true"
unused234234234 = bits, U32, 1340, [5:5], "false", "true"
silentTriggerError = bits, U32, 1340, [6:6], "false", "true"
useLinearCltSensor = bits, U32, 1340, [7:7], "false", "true"
canReadEnabled = bits, U32, 1340, [8:8], "false", "true"
@ -1579,7 +1579,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve"
enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration."
stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor."
verboseVVTDecoding = "enable vvt_details"
verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold"
invertCamVVTSignal = "get invertCamVVTSignal"
consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only"
useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss"
@ -1639,7 +1639,6 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
gpPwmNote4 = "gpPwmNote 4"
fuelClosedLoopCorrectionEnabled = "Enables lambda sensor closed loop feedback for fuelling."
isVerboseIAC = "Print details into rusEFI console"
isEngineChartEnabled = "This options enables data for 'engine sniffer' tab in console, which comes at some CPU price"
silentTriggerError = "Sometimes we have a performance issue while printing error"
canReadEnabled = "enable can_read/disable can_read"
canWriteEnabled = "enable can_write/disable can_write"
@ -1661,7 +1660,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
verboseTriggerSynchDetails = "enable trigger_details"
verboseTriggerSynchDetails = "Verbose info in console below engineSnifferRpmThreshold"
isManualSpinningMode = "Usually if we have no trigger events that means engine is stopped"
twoWireBatchInjection = "This is needed if your coils are individually wired and you wish to use batch injection."
useOnlyRisingEdgeForTrigger = "VR sensors are only precise on rising front"
@ -6761,8 +6760,7 @@ dialog = electronic_throttleDialog, "electronic_throttle"
dialog = monitoringSettings, "rusEFI Console Settings"
field = "Sensor Sniffer", sensorChartMode
field = " Threshold", sensorSnifferRpmThreshold
field = "Engine Sniffer", isEngineChartEnabled
field = " Threshold", engineSnifferRpmThreshold
field = "Engine Sniffer Threshold", engineSnifferRpmThreshold
dialog = generalSettings, "General"
field = "!https://rusefi.com/s/fuel"

16
firmware/tunerstudio/generated/rusefi_atlas.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.06.18.atlas.2005627596"
signature = "rusEFI 2022.06.18.atlas.1396665510"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature = "rusEFI 2022.06.18.atlas.2005627596" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.06.18.atlas.1396665510" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 16:10:50 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 18:50:30 UTC 2022
pageSize = 21352
page = 1
@ -593,7 +593,7 @@ fuelClosedLoopCorrectionEnabled = bits, U32, 1340, [1:1], "false", "true"
isVerboseIAC = bits, U32, 1340, [2:2], "false", "true"
boardUseTachPullUp = bits, U32, 1340, [3:3], "5v", "12v"
boardUseTempPullUp = bits, U32, 1340, [4:4], "Piggyback Mode", "With Pull Ups"
isEngineChartEnabled = bits, U32, 1340, [5:5], "false", "true"
unused234234234 = bits, U32, 1340, [5:5], "false", "true"
silentTriggerError = bits, U32, 1340, [6:6], "false", "true"
useLinearCltSensor = bits, U32, 1340, [7:7], "false", "true"
canReadEnabled = bits, U32, 1340, [8:8], "false", "true"
@ -1579,7 +1579,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve"
enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration."
stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor."
verboseVVTDecoding = "enable vvt_details"
verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold"
invertCamVVTSignal = "get invertCamVVTSignal"
consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only"
useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss"
@ -1639,7 +1639,6 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
gpPwmNote4 = "gpPwmNote 4"
fuelClosedLoopCorrectionEnabled = "Enables lambda sensor closed loop feedback for fuelling."
isVerboseIAC = "Print details into rusEFI console"
isEngineChartEnabled = "This options enables data for 'engine sniffer' tab in console, which comes at some CPU price"
silentTriggerError = "Sometimes we have a performance issue while printing error"
canReadEnabled = "enable can_read/disable can_read"
canWriteEnabled = "enable can_write/disable can_write"
@ -1661,7 +1660,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
verboseTriggerSynchDetails = "enable trigger_details"
verboseTriggerSynchDetails = "Verbose info in console below engineSnifferRpmThreshold"
isManualSpinningMode = "Usually if we have no trigger events that means engine is stopped"
twoWireBatchInjection = "This is needed if your coils are individually wired and you wish to use batch injection."
useOnlyRisingEdgeForTrigger = "VR sensors are only precise on rising front"
@ -6778,8 +6777,7 @@ dialog = electronic_throttleDialog, "electronic_throttle"
dialog = monitoringSettings, "rusEFI Console Settings"
field = "Sensor Sniffer", sensorChartMode
field = " Threshold", sensorSnifferRpmThreshold
field = "Engine Sniffer", isEngineChartEnabled
field = " Threshold", engineSnifferRpmThreshold
field = "Engine Sniffer Threshold", engineSnifferRpmThreshold
dialog = generalSettings, "General"
field = "!https://rusefi.com/s/fuel"

16
firmware/tunerstudio/generated/rusefi_core8.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.06.18.core8.2645415442"
signature = "rusEFI 2022.06.18.core8.3105474680"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature = "rusEFI 2022.06.18.core8.2645415442" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.06.18.core8.3105474680" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 16:10:34 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 18:50:14 UTC 2022
pageSize = 21352
page = 1
@ -593,7 +593,7 @@ fuelClosedLoopCorrectionEnabled = bits, U32, 1340, [1:1], "false", "true"
isVerboseIAC = bits, U32, 1340, [2:2], "false", "true"
boardUseTachPullUp = bits, U32, 1340, [3:3], "5v", "12v"
boardUseTempPullUp = bits, U32, 1340, [4:4], "Piggyback Mode", "With Pull Ups"
isEngineChartEnabled = bits, U32, 1340, [5:5], "false", "true"
unused234234234 = bits, U32, 1340, [5:5], "false", "true"
silentTriggerError = bits, U32, 1340, [6:6], "false", "true"
useLinearCltSensor = bits, U32, 1340, [7:7], "false", "true"
canReadEnabled = bits, U32, 1340, [8:8], "false", "true"
@ -1579,7 +1579,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve"
enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration."
stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor."
verboseVVTDecoding = "enable vvt_details"
verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold"
invertCamVVTSignal = "get invertCamVVTSignal"
consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only"
useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss"
@ -1639,7 +1639,6 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
gpPwmNote4 = "gpPwmNote 4"
fuelClosedLoopCorrectionEnabled = "Enables lambda sensor closed loop feedback for fuelling."
isVerboseIAC = "Print details into rusEFI console"
isEngineChartEnabled = "This options enables data for 'engine sniffer' tab in console, which comes at some CPU price"
silentTriggerError = "Sometimes we have a performance issue while printing error"
canReadEnabled = "enable can_read/disable can_read"
canWriteEnabled = "enable can_write/disable can_write"
@ -1661,7 +1660,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
verboseTriggerSynchDetails = "enable trigger_details"
verboseTriggerSynchDetails = "Verbose info in console below engineSnifferRpmThreshold"
isManualSpinningMode = "Usually if we have no trigger events that means engine is stopped"
twoWireBatchInjection = "This is needed if your coils are individually wired and you wish to use batch injection."
useOnlyRisingEdgeForTrigger = "VR sensors are only precise on rising front"
@ -6780,8 +6779,7 @@ dialog = electronic_throttleDialog, "electronic_throttle"
dialog = monitoringSettings, "rusEFI Console Settings"
field = "Sensor Sniffer", sensorChartMode
field = " Threshold", sensorSnifferRpmThreshold
field = "Engine Sniffer", isEngineChartEnabled
field = " Threshold", engineSnifferRpmThreshold
field = "Engine Sniffer Threshold", engineSnifferRpmThreshold
dialog = generalSettings, "General"
field = "!https://rusefi.com/s/fuel"

16
firmware/tunerstudio/generated/rusefi_f407-discovery.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.06.18.f407-discovery.1799456747"
signature = "rusEFI 2022.06.18.f407-discovery.1341495681"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature = "rusEFI 2022.06.18.f407-discovery.1799456747" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.06.18.f407-discovery.1341495681" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 16:10:47 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 18:50:27 UTC 2022
pageSize = 21352
page = 1
@ -593,7 +593,7 @@ fuelClosedLoopCorrectionEnabled = bits, U32, 1340, [1:1], "false", "true"
isVerboseIAC = bits, U32, 1340, [2:2], "false", "true"
boardUseTachPullUp = bits, U32, 1340, [3:3], "5v", "12v"
boardUseTempPullUp = bits, U32, 1340, [4:4], "Piggyback Mode", "With Pull Ups"
isEngineChartEnabled = bits, U32, 1340, [5:5], "false", "true"
unused234234234 = bits, U32, 1340, [5:5], "false", "true"
silentTriggerError = bits, U32, 1340, [6:6], "false", "true"
useLinearCltSensor = bits, U32, 1340, [7:7], "false", "true"
canReadEnabled = bits, U32, 1340, [8:8], "false", "true"
@ -1579,7 +1579,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve"
enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration."
stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor."
verboseVVTDecoding = "enable vvt_details"
verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold"
invertCamVVTSignal = "get invertCamVVTSignal"
consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only"
useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss"
@ -1639,7 +1639,6 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
gpPwmNote4 = "gpPwmNote 4"
fuelClosedLoopCorrectionEnabled = "Enables lambda sensor closed loop feedback for fuelling."
isVerboseIAC = "Print details into rusEFI console"
isEngineChartEnabled = "This options enables data for 'engine sniffer' tab in console, which comes at some CPU price"
silentTriggerError = "Sometimes we have a performance issue while printing error"
canReadEnabled = "enable can_read/disable can_read"
canWriteEnabled = "enable can_write/disable can_write"
@ -1661,7 +1660,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
verboseTriggerSynchDetails = "enable trigger_details"
verboseTriggerSynchDetails = "Verbose info in console below engineSnifferRpmThreshold"
isManualSpinningMode = "Usually if we have no trigger events that means engine is stopped"
twoWireBatchInjection = "This is needed if your coils are individually wired and you wish to use batch injection."
useOnlyRisingEdgeForTrigger = "VR sensors are only precise on rising front"
@ -6786,8 +6785,7 @@ dialog = electronic_throttleDialog, "electronic_throttle"
dialog = monitoringSettings, "rusEFI Console Settings"
field = "Sensor Sniffer", sensorChartMode
field = " Threshold", sensorSnifferRpmThreshold
field = "Engine Sniffer", isEngineChartEnabled
field = " Threshold", engineSnifferRpmThreshold
field = "Engine Sniffer Threshold", engineSnifferRpmThreshold
dialog = generalSettings, "General"
field = "!https://rusefi.com/s/fuel"

16
firmware/tunerstudio/generated/rusefi_f429-discovery.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.06.18.f429-discovery.1799456747"
signature = "rusEFI 2022.06.18.f429-discovery.1341495681"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature = "rusEFI 2022.06.18.f429-discovery.1799456747" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.06.18.f429-discovery.1341495681" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 16:10:48 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 18:50:29 UTC 2022
pageSize = 21352
page = 1
@ -593,7 +593,7 @@ fuelClosedLoopCorrectionEnabled = bits, U32, 1340, [1:1], "false", "true"
isVerboseIAC = bits, U32, 1340, [2:2], "false", "true"
boardUseTachPullUp = bits, U32, 1340, [3:3], "5v", "12v"
boardUseTempPullUp = bits, U32, 1340, [4:4], "Piggyback Mode", "With Pull Ups"
isEngineChartEnabled = bits, U32, 1340, [5:5], "false", "true"
unused234234234 = bits, U32, 1340, [5:5], "false", "true"
silentTriggerError = bits, U32, 1340, [6:6], "false", "true"
useLinearCltSensor = bits, U32, 1340, [7:7], "false", "true"
canReadEnabled = bits, U32, 1340, [8:8], "false", "true"
@ -1579,7 +1579,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve"
enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration."
stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor."
verboseVVTDecoding = "enable vvt_details"
verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold"
invertCamVVTSignal = "get invertCamVVTSignal"
consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only"
useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss"
@ -1639,7 +1639,6 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
gpPwmNote4 = "gpPwmNote 4"
fuelClosedLoopCorrectionEnabled = "Enables lambda sensor closed loop feedback for fuelling."
isVerboseIAC = "Print details into rusEFI console"
isEngineChartEnabled = "This options enables data for 'engine sniffer' tab in console, which comes at some CPU price"
silentTriggerError = "Sometimes we have a performance issue while printing error"
canReadEnabled = "enable can_read/disable can_read"
canWriteEnabled = "enable can_write/disable can_write"
@ -1661,7 +1660,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
verboseTriggerSynchDetails = "enable trigger_details"
verboseTriggerSynchDetails = "Verbose info in console below engineSnifferRpmThreshold"
isManualSpinningMode = "Usually if we have no trigger events that means engine is stopped"
twoWireBatchInjection = "This is needed if your coils are individually wired and you wish to use batch injection."
useOnlyRisingEdgeForTrigger = "VR sensors are only precise on rising front"
@ -6786,8 +6785,7 @@ dialog = electronic_throttleDialog, "electronic_throttle"
dialog = monitoringSettings, "rusEFI Console Settings"
field = "Sensor Sniffer", sensorChartMode
field = " Threshold", sensorSnifferRpmThreshold
field = "Engine Sniffer", isEngineChartEnabled
field = " Threshold", engineSnifferRpmThreshold
field = "Engine Sniffer Threshold", engineSnifferRpmThreshold
dialog = generalSettings, "General"
field = "!https://rusefi.com/s/fuel"

16
firmware/tunerstudio/generated/rusefi_frankenso_na6.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.06.18.frankenso_na6.690846511"
signature = "rusEFI 2022.06.18.frankenso_na6.228156741"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature = "rusEFI 2022.06.18.frankenso_na6.690846511" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.06.18.frankenso_na6.228156741" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 16:10:37 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 18:50:18 UTC 2022
pageSize = 21352
page = 1
@ -593,7 +593,7 @@ fuelClosedLoopCorrectionEnabled = bits, U32, 1340, [1:1], "false", "true"
isVerboseIAC = bits, U32, 1340, [2:2], "false", "true"
boardUseTachPullUp = bits, U32, 1340, [3:3], "5v", "12v"
boardUseTempPullUp = bits, U32, 1340, [4:4], "Piggyback Mode", "With Pull Ups"
isEngineChartEnabled = bits, U32, 1340, [5:5], "false", "true"
unused234234234 = bits, U32, 1340, [5:5], "false", "true"
silentTriggerError = bits, U32, 1340, [6:6], "false", "true"
useLinearCltSensor = bits, U32, 1340, [7:7], "false", "true"
canReadEnabled = bits, U32, 1340, [8:8], "false", "true"
@ -1579,7 +1579,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve"
enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration."
stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor."
verboseVVTDecoding = "enable vvt_details"
verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold"
invertCamVVTSignal = "get invertCamVVTSignal"
consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only"
useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss"
@ -1639,7 +1639,6 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
gpPwmNote4 = "gpPwmNote 4"
fuelClosedLoopCorrectionEnabled = "Enables lambda sensor closed loop feedback for fuelling."
isVerboseIAC = "Print details into rusEFI console"
isEngineChartEnabled = "This options enables data for 'engine sniffer' tab in console, which comes at some CPU price"
silentTriggerError = "Sometimes we have a performance issue while printing error"
canReadEnabled = "enable can_read/disable can_read"
canWriteEnabled = "enable can_write/disable can_write"
@ -1661,7 +1660,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
verboseTriggerSynchDetails = "enable trigger_details"
verboseTriggerSynchDetails = "Verbose info in console below engineSnifferRpmThreshold"
isManualSpinningMode = "Usually if we have no trigger events that means engine is stopped"
twoWireBatchInjection = "This is needed if your coils are individually wired and you wish to use batch injection."
useOnlyRisingEdgeForTrigger = "VR sensors are only precise on rising front"
@ -6786,8 +6785,7 @@ dialog = electronic_throttleDialog, "electronic_throttle"
dialog = monitoringSettings, "rusEFI Console Settings"
field = "Sensor Sniffer", sensorChartMode
field = " Threshold", sensorSnifferRpmThreshold
field = "Engine Sniffer", isEngineChartEnabled
field = " Threshold", engineSnifferRpmThreshold
field = "Engine Sniffer Threshold", engineSnifferRpmThreshold
dialog = generalSettings, "General"
field = "!https://rusefi.com/s/fuel"

16
firmware/tunerstudio/generated/rusefi_harley81.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.06.18.harley81.531486868"
signature = "rusEFI 2022.06.18.harley81.991545086"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature = "rusEFI 2022.06.18.harley81.531486868" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.06.18.harley81.991545086" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 16:10:12 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 18:49:52 UTC 2022
pageSize = 21352
page = 1
@ -593,7 +593,7 @@ fuelClosedLoopCorrectionEnabled = bits, U32, 1340, [1:1], "false", "true"
isVerboseIAC = bits, U32, 1340, [2:2], "false", "true"
boardUseTachPullUp = bits, U32, 1340, [3:3], "5v", "12v"
boardUseTempPullUp = bits, U32, 1340, [4:4], "Piggyback Mode", "With Pull Ups"
isEngineChartEnabled = bits, U32, 1340, [5:5], "false", "true"
unused234234234 = bits, U32, 1340, [5:5], "false", "true"
silentTriggerError = bits, U32, 1340, [6:6], "false", "true"
useLinearCltSensor = bits, U32, 1340, [7:7], "false", "true"
canReadEnabled = bits, U32, 1340, [8:8], "false", "true"
@ -1579,7 +1579,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve"
enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration."
stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor."
verboseVVTDecoding = "enable vvt_details"
verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold"
invertCamVVTSignal = "get invertCamVVTSignal"
consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only"
useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss"
@ -1639,7 +1639,6 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
gpPwmNote4 = "gpPwmNote 4"
fuelClosedLoopCorrectionEnabled = "Enables lambda sensor closed loop feedback for fuelling."
isVerboseIAC = "Print details into rusEFI console"
isEngineChartEnabled = "This options enables data for 'engine sniffer' tab in console, which comes at some CPU price"
silentTriggerError = "Sometimes we have a performance issue while printing error"
canReadEnabled = "enable can_read/disable can_read"
canWriteEnabled = "enable can_write/disable can_write"
@ -1661,7 +1660,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
verboseTriggerSynchDetails = "enable trigger_details"
verboseTriggerSynchDetails = "Verbose info in console below engineSnifferRpmThreshold"
isManualSpinningMode = "Usually if we have no trigger events that means engine is stopped"
twoWireBatchInjection = "This is needed if your coils are individually wired and you wish to use batch injection."
useOnlyRisingEdgeForTrigger = "VR sensors are only precise on rising front"
@ -6760,8 +6759,7 @@ dialog = electronic_throttleDialog, "electronic_throttle"
dialog = monitoringSettings, "rusEFI Console Settings"
field = "Sensor Sniffer", sensorChartMode
field = " Threshold", sensorSnifferRpmThreshold
field = "Engine Sniffer", isEngineChartEnabled
field = " Threshold", engineSnifferRpmThreshold
field = "Engine Sniffer Threshold", engineSnifferRpmThreshold
dialog = generalSettings, "General"
field = "!https://rusefi.com/s/fuel"

16
firmware/tunerstudio/generated/rusefi_hellen-gm-e67.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.06.18.hellen-gm-e67.1246664334"
signature = "rusEFI 2022.06.18.hellen-gm-e67.1861912804"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature = "rusEFI 2022.06.18.hellen-gm-e67.1246664334" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.06.18.hellen-gm-e67.1861912804" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 16:10:26 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 18:50:06 UTC 2022
pageSize = 21352
page = 1
@ -593,7 +593,7 @@ fuelClosedLoopCorrectionEnabled = bits, U32, 1340, [1:1], "false", "true"
isVerboseIAC = bits, U32, 1340, [2:2], "false", "true"
boardUseTachPullUp = bits, U32, 1340, [3:3], "5v", "12v"
boardUseTempPullUp = bits, U32, 1340, [4:4], "Piggyback Mode", "With Pull Ups"
isEngineChartEnabled = bits, U32, 1340, [5:5], "false", "true"
unused234234234 = bits, U32, 1340, [5:5], "false", "true"
silentTriggerError = bits, U32, 1340, [6:6], "false", "true"
useLinearCltSensor = bits, U32, 1340, [7:7], "false", "true"
canReadEnabled = bits, U32, 1340, [8:8], "false", "true"
@ -1579,7 +1579,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve"
enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration."
stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor."
verboseVVTDecoding = "enable vvt_details"
verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold"
invertCamVVTSignal = "get invertCamVVTSignal"
consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only"
useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss"
@ -1639,7 +1639,6 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
gpPwmNote4 = "gpPwmNote 4"
fuelClosedLoopCorrectionEnabled = "Enables lambda sensor closed loop feedback for fuelling."
isVerboseIAC = "Print details into rusEFI console"
isEngineChartEnabled = "This options enables data for 'engine sniffer' tab in console, which comes at some CPU price"
silentTriggerError = "Sometimes we have a performance issue while printing error"
canReadEnabled = "enable can_read/disable can_read"
canWriteEnabled = "enable can_write/disable can_write"
@ -1661,7 +1660,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
verboseTriggerSynchDetails = "enable trigger_details"
verboseTriggerSynchDetails = "Verbose info in console below engineSnifferRpmThreshold"
isManualSpinningMode = "Usually if we have no trigger events that means engine is stopped"
twoWireBatchInjection = "This is needed if your coils are individually wired and you wish to use batch injection."
useOnlyRisingEdgeForTrigger = "VR sensors are only precise on rising front"
@ -6761,8 +6760,7 @@ dialog = electronic_throttleDialog, "electronic_throttle"
dialog = monitoringSettings, "rusEFI Console Settings"
field = "Sensor Sniffer", sensorChartMode
field = " Threshold", sensorSnifferRpmThreshold
field = "Engine Sniffer", isEngineChartEnabled
field = " Threshold", engineSnifferRpmThreshold
field = "Engine Sniffer Threshold", engineSnifferRpmThreshold
dialog = generalSettings, "General"
field = "!https://rusefi.com/s/fuel"

16
firmware/tunerstudio/generated/rusefi_hellen-nb1.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.06.18.hellen-nb1.2999629351"
signature = "rusEFI 2022.06.18.hellen-nb1.2524883021"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature = "rusEFI 2022.06.18.hellen-nb1.2999629351" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.06.18.hellen-nb1.2524883021" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 16:10:25 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 18:50:05 UTC 2022
pageSize = 21352
page = 1
@ -593,7 +593,7 @@ fuelClosedLoopCorrectionEnabled = bits, U32, 1340, [1:1], "false", "true"
isVerboseIAC = bits, U32, 1340, [2:2], "false", "true"
boardUseTachPullUp = bits, U32, 1340, [3:3], "5v", "12v"
boardUseTempPullUp = bits, U32, 1340, [4:4], "Piggyback Mode", "With Pull Ups"
isEngineChartEnabled = bits, U32, 1340, [5:5], "false", "true"
unused234234234 = bits, U32, 1340, [5:5], "false", "true"
silentTriggerError = bits, U32, 1340, [6:6], "false", "true"
useLinearCltSensor = bits, U32, 1340, [7:7], "false", "true"
canReadEnabled = bits, U32, 1340, [8:8], "false", "true"
@ -1579,7 +1579,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve"
enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration."
stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor."
verboseVVTDecoding = "enable vvt_details"
verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold"
invertCamVVTSignal = "get invertCamVVTSignal"
consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only"
useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss"
@ -1639,7 +1639,6 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
gpPwmNote4 = "gpPwmNote 4"
fuelClosedLoopCorrectionEnabled = "Enables lambda sensor closed loop feedback for fuelling."
isVerboseIAC = "Print details into rusEFI console"
isEngineChartEnabled = "This options enables data for 'engine sniffer' tab in console, which comes at some CPU price"
silentTriggerError = "Sometimes we have a performance issue while printing error"
canReadEnabled = "enable can_read/disable can_read"
canWriteEnabled = "enable can_write/disable can_write"
@ -1661,7 +1660,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
verboseTriggerSynchDetails = "enable trigger_details"
verboseTriggerSynchDetails = "Verbose info in console below engineSnifferRpmThreshold"
isManualSpinningMode = "Usually if we have no trigger events that means engine is stopped"
twoWireBatchInjection = "This is needed if your coils are individually wired and you wish to use batch injection."
useOnlyRisingEdgeForTrigger = "VR sensors are only precise on rising front"
@ -6761,8 +6760,7 @@ dialog = electronic_throttleDialog, "electronic_throttle"
dialog = monitoringSettings, "rusEFI Console Settings"
field = "Sensor Sniffer", sensorChartMode
field = " Threshold", sensorSnifferRpmThreshold
field = "Engine Sniffer", isEngineChartEnabled
field = " Threshold", engineSnifferRpmThreshold
field = "Engine Sniffer Threshold", engineSnifferRpmThreshold
dialog = generalSettings, "General"
field = "!https://rusefi.com/s/fuel"

16
firmware/tunerstudio/generated/rusefi_hellen121nissan.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.06.18.hellen121nissan.3818864385"
signature = "rusEFI 2022.06.18.hellen121nissan.3341492587"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature = "rusEFI 2022.06.18.hellen121nissan.3818864385" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.06.18.hellen121nissan.3341492587" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 16:10:17 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 18:49:57 UTC 2022
pageSize = 21352
page = 1
@ -593,7 +593,7 @@ fuelClosedLoopCorrectionEnabled = bits, U32, 1340, [1:1], "false", "true"
isVerboseIAC = bits, U32, 1340, [2:2], "false", "true"
boardUseTachPullUp = bits, U32, 1340, [3:3], "5v", "12v"
boardUseTempPullUp = bits, U32, 1340, [4:4], "Piggyback Mode", "With Pull Ups"
isEngineChartEnabled = bits, U32, 1340, [5:5], "false", "true"
unused234234234 = bits, U32, 1340, [5:5], "false", "true"
silentTriggerError = bits, U32, 1340, [6:6], "false", "true"
useLinearCltSensor = bits, U32, 1340, [7:7], "false", "true"
canReadEnabled = bits, U32, 1340, [8:8], "false", "true"
@ -1579,7 +1579,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve"
enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration."
stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor."
verboseVVTDecoding = "enable vvt_details"
verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold"
invertCamVVTSignal = "get invertCamVVTSignal"
consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only"
useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss"
@ -1639,7 +1639,6 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
gpPwmNote4 = "gpPwmNote 4"
fuelClosedLoopCorrectionEnabled = "Enables lambda sensor closed loop feedback for fuelling."
isVerboseIAC = "Print details into rusEFI console"
isEngineChartEnabled = "This options enables data for 'engine sniffer' tab in console, which comes at some CPU price"
silentTriggerError = "Sometimes we have a performance issue while printing error"
canReadEnabled = "enable can_read/disable can_read"
canWriteEnabled = "enable can_write/disable can_write"
@ -1661,7 +1660,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
verboseTriggerSynchDetails = "enable trigger_details"
verboseTriggerSynchDetails = "Verbose info in console below engineSnifferRpmThreshold"
isManualSpinningMode = "Usually if we have no trigger events that means engine is stopped"
twoWireBatchInjection = "This is needed if your coils are individually wired and you wish to use batch injection."
useOnlyRisingEdgeForTrigger = "VR sensors are only precise on rising front"
@ -6757,8 +6756,7 @@ dialog = electronic_throttleDialog, "electronic_throttle"
dialog = monitoringSettings, "rusEFI Console Settings"
field = "Sensor Sniffer", sensorChartMode
field = " Threshold", sensorSnifferRpmThreshold
field = "Engine Sniffer", isEngineChartEnabled
field = " Threshold", engineSnifferRpmThreshold
field = "Engine Sniffer Threshold", engineSnifferRpmThreshold
dialog = generalSettings, "General"
field = "!https://rusefi.com/s/fuel"

16
firmware/tunerstudio/generated/rusefi_hellen121vag.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.06.18.hellen121vag.459293841"
signature = "rusEFI 2022.06.18.hellen121vag.1070881531"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature = "rusEFI 2022.06.18.hellen121vag.459293841" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.06.18.hellen121vag.1070881531" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 16:10:15 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 18:49:55 UTC 2022
pageSize = 21352
page = 1
@ -593,7 +593,7 @@ fuelClosedLoopCorrectionEnabled = bits, U32, 1340, [1:1], "false", "true"
isVerboseIAC = bits, U32, 1340, [2:2], "false", "true"
boardUseTachPullUp = bits, U32, 1340, [3:3], "5v", "12v"
boardUseTempPullUp = bits, U32, 1340, [4:4], "Piggyback Mode", "With Pull Ups"
isEngineChartEnabled = bits, U32, 1340, [5:5], "false", "true"
unused234234234 = bits, U32, 1340, [5:5], "false", "true"
silentTriggerError = bits, U32, 1340, [6:6], "false", "true"
useLinearCltSensor = bits, U32, 1340, [7:7], "false", "true"
canReadEnabled = bits, U32, 1340, [8:8], "false", "true"
@ -1579,7 +1579,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve"
enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration."
stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor."
verboseVVTDecoding = "enable vvt_details"
verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold"
invertCamVVTSignal = "get invertCamVVTSignal"
consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only"
useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss"
@ -1639,7 +1639,6 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
gpPwmNote4 = "gpPwmNote 4"
fuelClosedLoopCorrectionEnabled = "Enables lambda sensor closed loop feedback for fuelling."
isVerboseIAC = "Print details into rusEFI console"
isEngineChartEnabled = "This options enables data for 'engine sniffer' tab in console, which comes at some CPU price"
silentTriggerError = "Sometimes we have a performance issue while printing error"
canReadEnabled = "enable can_read/disable can_read"
canWriteEnabled = "enable can_write/disable can_write"
@ -1661,7 +1660,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
verboseTriggerSynchDetails = "enable trigger_details"
verboseTriggerSynchDetails = "Verbose info in console below engineSnifferRpmThreshold"
isManualSpinningMode = "Usually if we have no trigger events that means engine is stopped"
twoWireBatchInjection = "This is needed if your coils are individually wired and you wish to use batch injection."
useOnlyRisingEdgeForTrigger = "VR sensors are only precise on rising front"
@ -6760,8 +6759,7 @@ dialog = electronic_throttleDialog, "electronic_throttle"
dialog = monitoringSettings, "rusEFI Console Settings"
field = "Sensor Sniffer", sensorChartMode
field = " Threshold", sensorSnifferRpmThreshold
field = "Engine Sniffer", isEngineChartEnabled
field = " Threshold", engineSnifferRpmThreshold
field = "Engine Sniffer Threshold", engineSnifferRpmThreshold
dialog = generalSettings, "General"
field = "!https://rusefi.com/s/fuel"

16
firmware/tunerstudio/generated/rusefi_hellen128mercedes.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.06.18.hellen128.90856250"
signature = "rusEFI 2022.06.18.hellen128.568214864"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature = "rusEFI 2022.06.18.hellen128.90856250" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.06.18.hellen128.568214864" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 16:10:13 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 18:49:53 UTC 2022
pageSize = 21352
page = 1
@ -593,7 +593,7 @@ fuelClosedLoopCorrectionEnabled = bits, U32, 1340, [1:1], "false", "true"
isVerboseIAC = bits, U32, 1340, [2:2], "false", "true"
boardUseTachPullUp = bits, U32, 1340, [3:3], "5v", "12v"
boardUseTempPullUp = bits, U32, 1340, [4:4], "Piggyback Mode", "With Pull Ups"
isEngineChartEnabled = bits, U32, 1340, [5:5], "false", "true"
unused234234234 = bits, U32, 1340, [5:5], "false", "true"
silentTriggerError = bits, U32, 1340, [6:6], "false", "true"
useLinearCltSensor = bits, U32, 1340, [7:7], "false", "true"
canReadEnabled = bits, U32, 1340, [8:8], "false", "true"
@ -1579,7 +1579,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve"
enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration."
stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor."
verboseVVTDecoding = "enable vvt_details"
verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold"
invertCamVVTSignal = "get invertCamVVTSignal"
consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only"
useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss"
@ -1639,7 +1639,6 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
gpPwmNote4 = "gpPwmNote 4"
fuelClosedLoopCorrectionEnabled = "Enables lambda sensor closed loop feedback for fuelling."
isVerboseIAC = "Print details into rusEFI console"
isEngineChartEnabled = "This options enables data for 'engine sniffer' tab in console, which comes at some CPU price"
silentTriggerError = "Sometimes we have a performance issue while printing error"
canReadEnabled = "enable can_read/disable can_read"
canWriteEnabled = "enable can_write/disable can_write"
@ -1661,7 +1660,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
verboseTriggerSynchDetails = "enable trigger_details"
verboseTriggerSynchDetails = "Verbose info in console below engineSnifferRpmThreshold"
isManualSpinningMode = "Usually if we have no trigger events that means engine is stopped"
twoWireBatchInjection = "This is needed if your coils are individually wired and you wish to use batch injection."
useOnlyRisingEdgeForTrigger = "VR sensors are only precise on rising front"
@ -6757,8 +6756,7 @@ dialog = electronic_throttleDialog, "electronic_throttle"
dialog = monitoringSettings, "rusEFI Console Settings"
field = "Sensor Sniffer", sensorChartMode
field = " Threshold", sensorSnifferRpmThreshold
field = "Engine Sniffer", isEngineChartEnabled
field = " Threshold", engineSnifferRpmThreshold
field = "Engine Sniffer Threshold", engineSnifferRpmThreshold
dialog = generalSettings, "General"
field = "!https://rusefi.com/s/fuel"

16
firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.06.18.hellen154hyundai.4077843823"
signature = "rusEFI 2022.06.18.hellen154hyundai.3619351301"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature = "rusEFI 2022.06.18.hellen154hyundai.4077843823" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.06.18.hellen154hyundai.3619351301" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 16:10:18 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 18:49:58 UTC 2022
pageSize = 21352
page = 1
@ -593,7 +593,7 @@ fuelClosedLoopCorrectionEnabled = bits, U32, 1340, [1:1], "false", "true"
isVerboseIAC = bits, U32, 1340, [2:2], "false", "true"
boardUseTachPullUp = bits, U32, 1340, [3:3], "5v", "12v"
boardUseTempPullUp = bits, U32, 1340, [4:4], "Piggyback Mode", "With Pull Ups"
isEngineChartEnabled = bits, U32, 1340, [5:5], "false", "true"
unused234234234 = bits, U32, 1340, [5:5], "false", "true"
silentTriggerError = bits, U32, 1340, [6:6], "false", "true"
useLinearCltSensor = bits, U32, 1340, [7:7], "false", "true"
canReadEnabled = bits, U32, 1340, [8:8], "false", "true"
@ -1579,7 +1579,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve"
enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration."
stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor."
verboseVVTDecoding = "enable vvt_details"
verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold"
invertCamVVTSignal = "get invertCamVVTSignal"
consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only"
useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss"
@ -1639,7 +1639,6 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
gpPwmNote4 = "gpPwmNote 4"
fuelClosedLoopCorrectionEnabled = "Enables lambda sensor closed loop feedback for fuelling."
isVerboseIAC = "Print details into rusEFI console"
isEngineChartEnabled = "This options enables data for 'engine sniffer' tab in console, which comes at some CPU price"
silentTriggerError = "Sometimes we have a performance issue while printing error"
canReadEnabled = "enable can_read/disable can_read"
canWriteEnabled = "enable can_write/disable can_write"
@ -1661,7 +1660,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
verboseTriggerSynchDetails = "enable trigger_details"
verboseTriggerSynchDetails = "Verbose info in console below engineSnifferRpmThreshold"
isManualSpinningMode = "Usually if we have no trigger events that means engine is stopped"
twoWireBatchInjection = "This is needed if your coils are individually wired and you wish to use batch injection."
useOnlyRisingEdgeForTrigger = "VR sensors are only precise on rising front"
@ -6757,8 +6756,7 @@ dialog = electronic_throttleDialog, "electronic_throttle"
dialog = monitoringSettings, "rusEFI Console Settings"
field = "Sensor Sniffer", sensorChartMode
field = " Threshold", sensorSnifferRpmThreshold
field = "Engine Sniffer", isEngineChartEnabled
field = " Threshold", engineSnifferRpmThreshold
field = "Engine Sniffer Threshold", engineSnifferRpmThreshold
dialog = generalSettings, "General"
field = "!https://rusefi.com/s/fuel"

16
firmware/tunerstudio/generated/rusefi_hellen72.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.06.18.hellen72.2575216367"
signature = "rusEFI 2022.06.18.hellen72.3184177285"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature = "rusEFI 2022.06.18.hellen72.2575216367" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.06.18.hellen72.3184177285" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 16:10:21 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 18:50:01 UTC 2022
pageSize = 21352
page = 1
@ -593,7 +593,7 @@ fuelClosedLoopCorrectionEnabled = bits, U32, 1340, [1:1], "false", "true"
isVerboseIAC = bits, U32, 1340, [2:2], "false", "true"
boardUseTachPullUp = bits, U32, 1340, [3:3], "5v", "12v"
boardUseTempPullUp = bits, U32, 1340, [4:4], "Piggyback Mode", "With Pull Ups"
isEngineChartEnabled = bits, U32, 1340, [5:5], "false", "true"
unused234234234 = bits, U32, 1340, [5:5], "false", "true"
silentTriggerError = bits, U32, 1340, [6:6], "false", "true"
useLinearCltSensor = bits, U32, 1340, [7:7], "false", "true"
canReadEnabled = bits, U32, 1340, [8:8], "false", "true"
@ -1579,7 +1579,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve"
enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration."
stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor."
verboseVVTDecoding = "enable vvt_details"
verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold"
invertCamVVTSignal = "get invertCamVVTSignal"
consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only"
useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss"
@ -1639,7 +1639,6 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
gpPwmNote4 = "gpPwmNote 4"
fuelClosedLoopCorrectionEnabled = "Enables lambda sensor closed loop feedback for fuelling."
isVerboseIAC = "Print details into rusEFI console"
isEngineChartEnabled = "This options enables data for 'engine sniffer' tab in console, which comes at some CPU price"
silentTriggerError = "Sometimes we have a performance issue while printing error"
canReadEnabled = "enable can_read/disable can_read"
canWriteEnabled = "enable can_write/disable can_write"
@ -1661,7 +1660,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
verboseTriggerSynchDetails = "enable trigger_details"
verboseTriggerSynchDetails = "Verbose info in console below engineSnifferRpmThreshold"
isManualSpinningMode = "Usually if we have no trigger events that means engine is stopped"
twoWireBatchInjection = "This is needed if your coils are individually wired and you wish to use batch injection."
useOnlyRisingEdgeForTrigger = "VR sensors are only precise on rising front"
@ -6761,8 +6760,7 @@ dialog = electronic_throttleDialog, "electronic_throttle"
dialog = monitoringSettings, "rusEFI Console Settings"
field = "Sensor Sniffer", sensorChartMode
field = " Threshold", sensorSnifferRpmThreshold
field = "Engine Sniffer", isEngineChartEnabled
field = " Threshold", engineSnifferRpmThreshold
field = "Engine Sniffer Threshold", engineSnifferRpmThreshold
dialog = generalSettings, "General"
field = "!https://rusefi.com/s/fuel"

16
firmware/tunerstudio/generated/rusefi_hellen81.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.06.18.hellen81.1240752097"
signature = "rusEFI 2022.06.18.hellen81.1832927627"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature = "rusEFI 2022.06.18.hellen81.1240752097" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.06.18.hellen81.1832927627" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 16:10:23 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 18:50:03 UTC 2022
pageSize = 21352
page = 1
@ -593,7 +593,7 @@ fuelClosedLoopCorrectionEnabled = bits, U32, 1340, [1:1], "false", "true"
isVerboseIAC = bits, U32, 1340, [2:2], "false", "true"
boardUseTachPullUp = bits, U32, 1340, [3:3], "5v", "12v"
boardUseTempPullUp = bits, U32, 1340, [4:4], "Piggyback Mode", "With Pull Ups"
isEngineChartEnabled = bits, U32, 1340, [5:5], "false", "true"
unused234234234 = bits, U32, 1340, [5:5], "false", "true"
silentTriggerError = bits, U32, 1340, [6:6], "false", "true"
useLinearCltSensor = bits, U32, 1340, [7:7], "false", "true"
canReadEnabled = bits, U32, 1340, [8:8], "false", "true"
@ -1579,7 +1579,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve"
enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration."
stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor."
verboseVVTDecoding = "enable vvt_details"
verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold"
invertCamVVTSignal = "get invertCamVVTSignal"
consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only"
useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss"
@ -1639,7 +1639,6 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
gpPwmNote4 = "gpPwmNote 4"
fuelClosedLoopCorrectionEnabled = "Enables lambda sensor closed loop feedback for fuelling."
isVerboseIAC = "Print details into rusEFI console"
isEngineChartEnabled = "This options enables data for 'engine sniffer' tab in console, which comes at some CPU price"
silentTriggerError = "Sometimes we have a performance issue while printing error"
canReadEnabled = "enable can_read/disable can_read"
canWriteEnabled = "enable can_write/disable can_write"
@ -1661,7 +1660,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
verboseTriggerSynchDetails = "enable trigger_details"
verboseTriggerSynchDetails = "Verbose info in console below engineSnifferRpmThreshold"
isManualSpinningMode = "Usually if we have no trigger events that means engine is stopped"
twoWireBatchInjection = "This is needed if your coils are individually wired and you wish to use batch injection."
useOnlyRisingEdgeForTrigger = "VR sensors are only precise on rising front"
@ -6759,8 +6758,7 @@ dialog = electronic_throttleDialog, "electronic_throttle"
dialog = monitoringSettings, "rusEFI Console Settings"
field = "Sensor Sniffer", sensorChartMode
field = " Threshold", sensorSnifferRpmThreshold
field = "Engine Sniffer", isEngineChartEnabled
field = " Threshold", engineSnifferRpmThreshold
field = "Engine Sniffer Threshold", engineSnifferRpmThreshold
dialog = generalSettings, "General"
field = "!https://rusefi.com/s/fuel"

16
firmware/tunerstudio/generated/rusefi_hellen88bmw.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.06.18.hellen88bmw.936788303"
signature = "rusEFI 2022.06.18.hellen88bmw.325213989"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature = "rusEFI 2022.06.18.hellen88bmw.936788303" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.06.18.hellen88bmw.325213989" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 16:10:20 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 18:50:00 UTC 2022
pageSize = 21352
page = 1
@ -593,7 +593,7 @@ fuelClosedLoopCorrectionEnabled = bits, U32, 1340, [1:1], "false", "true"
isVerboseIAC = bits, U32, 1340, [2:2], "false", "true"
boardUseTachPullUp = bits, U32, 1340, [3:3], "5v", "12v"
boardUseTempPullUp = bits, U32, 1340, [4:4], "Piggyback Mode", "With Pull Ups"
isEngineChartEnabled = bits, U32, 1340, [5:5], "false", "true"
unused234234234 = bits, U32, 1340, [5:5], "false", "true"
silentTriggerError = bits, U32, 1340, [6:6], "false", "true"
useLinearCltSensor = bits, U32, 1340, [7:7], "false", "true"
canReadEnabled = bits, U32, 1340, [8:8], "false", "true"
@ -1579,7 +1579,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve"
enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration."
stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor."
verboseVVTDecoding = "enable vvt_details"
verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold"
invertCamVVTSignal = "get invertCamVVTSignal"
consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only"
useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss"
@ -1639,7 +1639,6 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
gpPwmNote4 = "gpPwmNote 4"
fuelClosedLoopCorrectionEnabled = "Enables lambda sensor closed loop feedback for fuelling."
isVerboseIAC = "Print details into rusEFI console"
isEngineChartEnabled = "This options enables data for 'engine sniffer' tab in console, which comes at some CPU price"
silentTriggerError = "Sometimes we have a performance issue while printing error"
canReadEnabled = "enable can_read/disable can_read"
canWriteEnabled = "enable can_write/disable can_write"
@ -1661,7 +1660,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
verboseTriggerSynchDetails = "enable trigger_details"
verboseTriggerSynchDetails = "Verbose info in console below engineSnifferRpmThreshold"
isManualSpinningMode = "Usually if we have no trigger events that means engine is stopped"
twoWireBatchInjection = "This is needed if your coils are individually wired and you wish to use batch injection."
useOnlyRisingEdgeForTrigger = "VR sensors are only precise on rising front"
@ -6757,8 +6756,7 @@ dialog = electronic_throttleDialog, "electronic_throttle"
dialog = monitoringSettings, "rusEFI Console Settings"
field = "Sensor Sniffer", sensorChartMode
field = " Threshold", sensorSnifferRpmThreshold
field = "Engine Sniffer", isEngineChartEnabled
field = " Threshold", engineSnifferRpmThreshold
field = "Engine Sniffer Threshold", engineSnifferRpmThreshold
dialog = generalSettings, "General"
field = "!https://rusefi.com/s/fuel"

16
firmware/tunerstudio/generated/rusefi_hellenNA6.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.06.18.hellenNA6.3922359947"
signature = "rusEFI 2022.06.18.hellenNA6.3447613665"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature = "rusEFI 2022.06.18.hellenNA6.3922359947" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.06.18.hellenNA6.3447613665" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 16:10:28 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 18:50:08 UTC 2022
pageSize = 21352
page = 1
@ -593,7 +593,7 @@ fuelClosedLoopCorrectionEnabled = bits, U32, 1340, [1:1], "false", "true"
isVerboseIAC = bits, U32, 1340, [2:2], "false", "true"
boardUseTachPullUp = bits, U32, 1340, [3:3], "5v", "12v"
boardUseTempPullUp = bits, U32, 1340, [4:4], "Piggyback Mode", "With Pull Ups"
isEngineChartEnabled = bits, U32, 1340, [5:5], "false", "true"
unused234234234 = bits, U32, 1340, [5:5], "false", "true"
silentTriggerError = bits, U32, 1340, [6:6], "false", "true"
useLinearCltSensor = bits, U32, 1340, [7:7], "false", "true"
canReadEnabled = bits, U32, 1340, [8:8], "false", "true"
@ -1579,7 +1579,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve"
enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration."
stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor."
verboseVVTDecoding = "enable vvt_details"
verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold"
invertCamVVTSignal = "get invertCamVVTSignal"
consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only"
useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss"
@ -1639,7 +1639,6 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
gpPwmNote4 = "gpPwmNote 4"
fuelClosedLoopCorrectionEnabled = "Enables lambda sensor closed loop feedback for fuelling."
isVerboseIAC = "Print details into rusEFI console"
isEngineChartEnabled = "This options enables data for 'engine sniffer' tab in console, which comes at some CPU price"
silentTriggerError = "Sometimes we have a performance issue while printing error"
canReadEnabled = "enable can_read/disable can_read"
canWriteEnabled = "enable can_write/disable can_write"
@ -1661,7 +1660,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
verboseTriggerSynchDetails = "enable trigger_details"
verboseTriggerSynchDetails = "Verbose info in console below engineSnifferRpmThreshold"
isManualSpinningMode = "Usually if we have no trigger events that means engine is stopped"
twoWireBatchInjection = "This is needed if your coils are individually wired and you wish to use batch injection."
useOnlyRisingEdgeForTrigger = "VR sensors are only precise on rising front"
@ -6761,8 +6760,7 @@ dialog = electronic_throttleDialog, "electronic_throttle"
dialog = monitoringSettings, "rusEFI Console Settings"
field = "Sensor Sniffer", sensorChartMode
field = " Threshold", sensorSnifferRpmThreshold
field = "Engine Sniffer", isEngineChartEnabled
field = " Threshold", engineSnifferRpmThreshold
field = "Engine Sniffer Threshold", engineSnifferRpmThreshold
dialog = generalSettings, "General"
field = "!https://rusefi.com/s/fuel"

16
firmware/tunerstudio/generated/rusefi_hellenNA8_96.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.06.18.hellenNA8_96.3355763644"
signature = "rusEFI 2022.06.18.hellenNA8_96.3971022294"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature = "rusEFI 2022.06.18.hellenNA8_96.3355763644" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.06.18.hellenNA8_96.3971022294" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 16:10:29 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 18:50:10 UTC 2022
pageSize = 21352
page = 1
@ -593,7 +593,7 @@ fuelClosedLoopCorrectionEnabled = bits, U32, 1340, [1:1], "false", "true"
isVerboseIAC = bits, U32, 1340, [2:2], "false", "true"
boardUseTachPullUp = bits, U32, 1340, [3:3], "5v", "12v"
boardUseTempPullUp = bits, U32, 1340, [4:4], "Piggyback Mode", "With Pull Ups"
isEngineChartEnabled = bits, U32, 1340, [5:5], "false", "true"
unused234234234 = bits, U32, 1340, [5:5], "false", "true"
silentTriggerError = bits, U32, 1340, [6:6], "false", "true"
useLinearCltSensor = bits, U32, 1340, [7:7], "false", "true"
canReadEnabled = bits, U32, 1340, [8:8], "false", "true"
@ -1579,7 +1579,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve"
enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration."
stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor."
verboseVVTDecoding = "enable vvt_details"
verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold"
invertCamVVTSignal = "get invertCamVVTSignal"
consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only"
useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss"
@ -1639,7 +1639,6 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
gpPwmNote4 = "gpPwmNote 4"
fuelClosedLoopCorrectionEnabled = "Enables lambda sensor closed loop feedback for fuelling."
isVerboseIAC = "Print details into rusEFI console"
isEngineChartEnabled = "This options enables data for 'engine sniffer' tab in console, which comes at some CPU price"
silentTriggerError = "Sometimes we have a performance issue while printing error"
canReadEnabled = "enable can_read/disable can_read"
canWriteEnabled = "enable can_write/disable can_write"
@ -1661,7 +1660,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
verboseTriggerSynchDetails = "enable trigger_details"
verboseTriggerSynchDetails = "Verbose info in console below engineSnifferRpmThreshold"
isManualSpinningMode = "Usually if we have no trigger events that means engine is stopped"
twoWireBatchInjection = "This is needed if your coils are individually wired and you wish to use batch injection."
useOnlyRisingEdgeForTrigger = "VR sensors are only precise on rising front"
@ -6761,8 +6760,7 @@ dialog = electronic_throttleDialog, "electronic_throttle"
dialog = monitoringSettings, "rusEFI Console Settings"
field = "Sensor Sniffer", sensorChartMode
field = " Threshold", sensorSnifferRpmThreshold
field = "Engine Sniffer", isEngineChartEnabled
field = " Threshold", engineSnifferRpmThreshold
field = "Engine Sniffer Threshold", engineSnifferRpmThreshold
dialog = generalSettings, "General"
field = "!https://rusefi.com/s/fuel"

16
firmware/tunerstudio/generated/rusefi_hellen_cypress.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.06.18.hellen_cypress.778947041"
signature = "rusEFI 2022.06.18.hellen_cypress.182048651"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature = "rusEFI 2022.06.18.hellen_cypress.778947041" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.06.18.hellen_cypress.182048651" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Sat Jun 18 16:10:56 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Sat Jun 18 18:50:37 UTC 2022
pageSize = 21352
page = 1
@ -593,7 +593,7 @@ fuelClosedLoopCorrectionEnabled = bits, U32, 1340, [1:1], "false", "true"
isVerboseIAC = bits, U32, 1340, [2:2], "false", "true"
boardUseTachPullUp = bits, U32, 1340, [3:3], "5v", "12v"
boardUseTempPullUp = bits, U32, 1340, [4:4], "Piggyback Mode", "With Pull Ups"
isEngineChartEnabled = bits, U32, 1340, [5:5], "false", "true"
unused234234234 = bits, U32, 1340, [5:5], "false", "true"
silentTriggerError = bits, U32, 1340, [6:6], "false", "true"
useLinearCltSensor = bits, U32, 1340, [7:7], "false", "true"
canReadEnabled = bits, U32, 1340, [8:8], "false", "true"
@ -1579,7 +1579,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve"
enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration."
stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor."
verboseVVTDecoding = "enable vvt_details"
verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold"
invertCamVVTSignal = "get invertCamVVTSignal"
consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only"
useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss"
@ -1639,7 +1639,6 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
gpPwmNote4 = "gpPwmNote 4"
fuelClosedLoopCorrectionEnabled = "Enables lambda sensor closed loop feedback for fuelling."
isVerboseIAC = "Print details into rusEFI console"
isEngineChartEnabled = "This options enables data for 'engine sniffer' tab in console, which comes at some CPU price"
silentTriggerError = "Sometimes we have a performance issue while printing error"
canReadEnabled = "enable can_read/disable can_read"
canWriteEnabled = "enable can_write/disable can_write"
@ -1661,7 +1660,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
verboseTriggerSynchDetails = "enable trigger_details"
verboseTriggerSynchDetails = "Verbose info in console below engineSnifferRpmThreshold"
isManualSpinningMode = "Usually if we have no trigger events that means engine is stopped"
twoWireBatchInjection = "This is needed if your coils are individually wired and you wish to use batch injection."
useOnlyRisingEdgeForTrigger = "VR sensors are only precise on rising front"
@ -6786,8 +6785,7 @@ dialog = electronic_throttleDialog, "electronic_throttle"
dialog = monitoringSettings, "rusEFI Console Settings"
field = "Sensor Sniffer", sensorChartMode
field = " Threshold", sensorSnifferRpmThreshold
field = "Engine Sniffer", isEngineChartEnabled
field = " Threshold", engineSnifferRpmThreshold
field = "Engine Sniffer Threshold", engineSnifferRpmThreshold
dialog = generalSettings, "General"
field = "!https://rusefi.com/s/fuel"

16
firmware/tunerstudio/generated/rusefi_kinetis.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.06.18.kin.1882107500"
signature = "rusEFI 2022.06.18.kin.1419423750"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature = "rusEFI 2022.06.18.kin.1882107500" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.06.18.kin.1419423750" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Sat Jun 18 16:10:55 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Sat Jun 18 18:50:35 UTC 2022
pageSize = 21324
page = 1
@ -587,7 +587,7 @@ fuelClosedLoopCorrectionEnabled = bits, U32, 1340, [1:1], "false", "true"
isVerboseIAC = bits, U32, 1340, [2:2], "false", "true"
boardUseTachPullUp = bits, U32, 1340, [3:3], "5v", "12v"
boardUseTempPullUp = bits, U32, 1340, [4:4], "Piggyback Mode", "With Pull Ups"
isEngineChartEnabled = bits, U32, 1340, [5:5], "false", "true"
unused234234234 = bits, U32, 1340, [5:5], "false", "true"
silentTriggerError = bits, U32, 1340, [6:6], "false", "true"
useLinearCltSensor = bits, U32, 1340, [7:7], "false", "true"
canReadEnabled = bits, U32, 1340, [8:8], "false", "true"
@ -1555,7 +1555,7 @@ tcu_32Vals = array, U08, 21316, [8], "%", 1, 0, 0, 255, 0
useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve"
enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration."
stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor."
verboseVVTDecoding = "enable vvt_details"
verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold"
invertCamVVTSignal = "get invertCamVVTSignal"
consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only"
useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss"
@ -1612,7 +1612,6 @@ tcu_32Vals = array, U08, 21316, [8], "%", 1, 0, 0, 255, 0
gpPwmNote4 = "gpPwmNote 4"
fuelClosedLoopCorrectionEnabled = "Enables lambda sensor closed loop feedback for fuelling."
isVerboseIAC = "Print details into rusEFI console"
isEngineChartEnabled = "This options enables data for 'engine sniffer' tab in console, which comes at some CPU price"
silentTriggerError = "Sometimes we have a performance issue while printing error"
canReadEnabled = "enable can_read/disable can_read"
canWriteEnabled = "enable can_write/disable can_write"
@ -1634,7 +1633,7 @@ tcu_32Vals = array, U08, 21316, [8], "%", 1, 0, 0, 255, 0
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
verboseTriggerSynchDetails = "enable trigger_details"
verboseTriggerSynchDetails = "Verbose info in console below engineSnifferRpmThreshold"
isManualSpinningMode = "Usually if we have no trigger events that means engine is stopped"
twoWireBatchInjection = "This is needed if your coils are individually wired and you wish to use batch injection."
useOnlyRisingEdgeForTrigger = "VR sensors are only precise on rising front"
@ -6748,8 +6747,7 @@ dialog = electronic_throttleDialog, "electronic_throttle"
dialog = monitoringSettings, "rusEFI Console Settings"
field = "Sensor Sniffer", sensorChartMode
field = " Threshold", sensorSnifferRpmThreshold
field = "Engine Sniffer", isEngineChartEnabled
field = " Threshold", engineSnifferRpmThreshold
field = "Engine Sniffer Threshold", engineSnifferRpmThreshold
dialog = generalSettings, "General"
field = "!https://rusefi.com/s/fuel"

16
firmware/tunerstudio/generated/rusefi_mre_f4.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.06.18.mre_f4.252902500"
signature = "rusEFI 2022.06.18.mre_f4.732357134"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature = "rusEFI 2022.06.18.mre_f4.252902500" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.06.18.mre_f4.732357134" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 16:10:33 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 18:50:13 UTC 2022
pageSize = 21352
page = 1
@ -593,7 +593,7 @@ fuelClosedLoopCorrectionEnabled = bits, U32, 1340, [1:1], "false", "true"
isVerboseIAC = bits, U32, 1340, [2:2], "false", "true"
boardUseTachPullUp = bits, U32, 1340, [3:3], "5v", "12v"
boardUseTempPullUp = bits, U32, 1340, [4:4], "Piggyback Mode", "With Pull Ups"
isEngineChartEnabled = bits, U32, 1340, [5:5], "false", "true"
unused234234234 = bits, U32, 1340, [5:5], "false", "true"
silentTriggerError = bits, U32, 1340, [6:6], "false", "true"
useLinearCltSensor = bits, U32, 1340, [7:7], "false", "true"
canReadEnabled = bits, U32, 1340, [8:8], "false", "true"
@ -1579,7 +1579,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve"
enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration."
stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor."
verboseVVTDecoding = "enable vvt_details"
verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold"
invertCamVVTSignal = "get invertCamVVTSignal"
consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only"
useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss"
@ -1639,7 +1639,6 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
gpPwmNote4 = "gpPwmNote 4"
fuelClosedLoopCorrectionEnabled = "Enables lambda sensor closed loop feedback for fuelling."
isVerboseIAC = "Print details into rusEFI console"
isEngineChartEnabled = "This options enables data for 'engine sniffer' tab in console, which comes at some CPU price"
silentTriggerError = "Sometimes we have a performance issue while printing error"
canReadEnabled = "enable can_read/disable can_read"
canWriteEnabled = "enable can_write/disable can_write"
@ -1661,7 +1660,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
verboseTriggerSynchDetails = "enable trigger_details"
verboseTriggerSynchDetails = "Verbose info in console below engineSnifferRpmThreshold"
isManualSpinningMode = "Usually if we have no trigger events that means engine is stopped"
twoWireBatchInjection = "This is needed if your coils are individually wired and you wish to use batch injection."
useOnlyRisingEdgeForTrigger = "VR sensors are only precise on rising front"
@ -6762,8 +6761,7 @@ dialog = electronic_throttleDialog, "electronic_throttle"
dialog = monitoringSettings, "rusEFI Console Settings"
field = "Sensor Sniffer", sensorChartMode
field = " Threshold", sensorSnifferRpmThreshold
field = "Engine Sniffer", isEngineChartEnabled
field = " Threshold", engineSnifferRpmThreshold
field = "Engine Sniffer Threshold", engineSnifferRpmThreshold
dialog = generalSettings, "General"
field = "!https://rusefi.com/s/fuel"

16
firmware/tunerstudio/generated/rusefi_mre_f7.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.06.18.mre_f7.252902500"
signature = "rusEFI 2022.06.18.mre_f7.732357134"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature = "rusEFI 2022.06.18.mre_f7.252902500" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.06.18.mre_f7.732357134" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 16:10:31 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 18:50:11 UTC 2022
pageSize = 21352
page = 1
@ -593,7 +593,7 @@ fuelClosedLoopCorrectionEnabled = bits, U32, 1340, [1:1], "false", "true"
isVerboseIAC = bits, U32, 1340, [2:2], "false", "true"
boardUseTachPullUp = bits, U32, 1340, [3:3], "5v", "12v"
boardUseTempPullUp = bits, U32, 1340, [4:4], "Piggyback Mode", "With Pull Ups"
isEngineChartEnabled = bits, U32, 1340, [5:5], "false", "true"
unused234234234 = bits, U32, 1340, [5:5], "false", "true"
silentTriggerError = bits, U32, 1340, [6:6], "false", "true"
useLinearCltSensor = bits, U32, 1340, [7:7], "false", "true"
canReadEnabled = bits, U32, 1340, [8:8], "false", "true"
@ -1579,7 +1579,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve"
enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration."
stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor."
verboseVVTDecoding = "enable vvt_details"
verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold"
invertCamVVTSignal = "get invertCamVVTSignal"
consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only"
useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss"
@ -1639,7 +1639,6 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
gpPwmNote4 = "gpPwmNote 4"
fuelClosedLoopCorrectionEnabled = "Enables lambda sensor closed loop feedback for fuelling."
isVerboseIAC = "Print details into rusEFI console"
isEngineChartEnabled = "This options enables data for 'engine sniffer' tab in console, which comes at some CPU price"
silentTriggerError = "Sometimes we have a performance issue while printing error"
canReadEnabled = "enable can_read/disable can_read"
canWriteEnabled = "enable can_write/disable can_write"
@ -1661,7 +1660,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
verboseTriggerSynchDetails = "enable trigger_details"
verboseTriggerSynchDetails = "Verbose info in console below engineSnifferRpmThreshold"
isManualSpinningMode = "Usually if we have no trigger events that means engine is stopped"
twoWireBatchInjection = "This is needed if your coils are individually wired and you wish to use batch injection."
useOnlyRisingEdgeForTrigger = "VR sensors are only precise on rising front"
@ -6762,8 +6761,7 @@ dialog = electronic_throttleDialog, "electronic_throttle"
dialog = monitoringSettings, "rusEFI Console Settings"
field = "Sensor Sniffer", sensorChartMode
field = " Threshold", sensorSnifferRpmThreshold
field = "Engine Sniffer", isEngineChartEnabled
field = " Threshold", engineSnifferRpmThreshold
field = "Engine Sniffer Threshold", engineSnifferRpmThreshold
dialog = generalSettings, "General"
field = "!https://rusefi.com/s/fuel"

16
firmware/tunerstudio/generated/rusefi_prometheus_405.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.06.18.prometheus_405.1001086477"
signature = "rusEFI 2022.06.18.prometheus_405.522141799"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature = "rusEFI 2022.06.18.prometheus_405.1001086477" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.06.18.prometheus_405.522141799" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 16:10:41 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 18:50:21 UTC 2022
pageSize = 21352
page = 1
@ -593,7 +593,7 @@ fuelClosedLoopCorrectionEnabled = bits, U32, 1340, [1:1], "false", "true"
isVerboseIAC = bits, U32, 1340, [2:2], "false", "true"
boardUseTachPullUp = bits, U32, 1340, [3:3], "5v", "12v"
boardUseTempPullUp = bits, U32, 1340, [4:4], "Piggyback Mode", "With Pull Ups"
isEngineChartEnabled = bits, U32, 1340, [5:5], "false", "true"
unused234234234 = bits, U32, 1340, [5:5], "false", "true"
silentTriggerError = bits, U32, 1340, [6:6], "false", "true"
useLinearCltSensor = bits, U32, 1340, [7:7], "false", "true"
canReadEnabled = bits, U32, 1340, [8:8], "false", "true"
@ -1579,7 +1579,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve"
enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration."
stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor."
verboseVVTDecoding = "enable vvt_details"
verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold"
invertCamVVTSignal = "get invertCamVVTSignal"
consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only"
useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss"
@ -1639,7 +1639,6 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
gpPwmNote4 = "gpPwmNote 4"
fuelClosedLoopCorrectionEnabled = "Enables lambda sensor closed loop feedback for fuelling."
isVerboseIAC = "Print details into rusEFI console"
isEngineChartEnabled = "This options enables data for 'engine sniffer' tab in console, which comes at some CPU price"
silentTriggerError = "Sometimes we have a performance issue while printing error"
canReadEnabled = "enable can_read/disable can_read"
canWriteEnabled = "enable can_write/disable can_write"
@ -1661,7 +1660,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
verboseTriggerSynchDetails = "enable trigger_details"
verboseTriggerSynchDetails = "Verbose info in console below engineSnifferRpmThreshold"
isManualSpinningMode = "Usually if we have no trigger events that means engine is stopped"
twoWireBatchInjection = "This is needed if your coils are individually wired and you wish to use batch injection."
useOnlyRisingEdgeForTrigger = "VR sensors are only precise on rising front"
@ -6781,8 +6780,7 @@ dialog = electronic_throttleDialog, "electronic_throttle"
dialog = monitoringSettings, "rusEFI Console Settings"
field = "Sensor Sniffer", sensorChartMode
field = " Threshold", sensorSnifferRpmThreshold
field = "Engine Sniffer", isEngineChartEnabled
field = " Threshold", engineSnifferRpmThreshold
field = "Engine Sniffer Threshold", engineSnifferRpmThreshold
dialog = generalSettings, "General"
field = "!https://rusefi.com/s/fuel"

16
firmware/tunerstudio/generated/rusefi_prometheus_469.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.06.18.prometheus_469.1001086477"
signature = "rusEFI 2022.06.18.prometheus_469.522141799"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature = "rusEFI 2022.06.18.prometheus_469.1001086477" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.06.18.prometheus_469.522141799" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 16:10:39 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 18:50:19 UTC 2022
pageSize = 21352
page = 1
@ -593,7 +593,7 @@ fuelClosedLoopCorrectionEnabled = bits, U32, 1340, [1:1], "false", "true"
isVerboseIAC = bits, U32, 1340, [2:2], "false", "true"
boardUseTachPullUp = bits, U32, 1340, [3:3], "5v", "12v"
boardUseTempPullUp = bits, U32, 1340, [4:4], "Piggyback Mode", "With Pull Ups"
isEngineChartEnabled = bits, U32, 1340, [5:5], "false", "true"
unused234234234 = bits, U32, 1340, [5:5], "false", "true"
silentTriggerError = bits, U32, 1340, [6:6], "false", "true"
useLinearCltSensor = bits, U32, 1340, [7:7], "false", "true"
canReadEnabled = bits, U32, 1340, [8:8], "false", "true"
@ -1579,7 +1579,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve"
enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration."
stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor."
verboseVVTDecoding = "enable vvt_details"
verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold"
invertCamVVTSignal = "get invertCamVVTSignal"
consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only"
useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss"
@ -1639,7 +1639,6 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
gpPwmNote4 = "gpPwmNote 4"
fuelClosedLoopCorrectionEnabled = "Enables lambda sensor closed loop feedback for fuelling."
isVerboseIAC = "Print details into rusEFI console"
isEngineChartEnabled = "This options enables data for 'engine sniffer' tab in console, which comes at some CPU price"
silentTriggerError = "Sometimes we have a performance issue while printing error"
canReadEnabled = "enable can_read/disable can_read"
canWriteEnabled = "enable can_write/disable can_write"
@ -1661,7 +1660,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
verboseTriggerSynchDetails = "enable trigger_details"
verboseTriggerSynchDetails = "Verbose info in console below engineSnifferRpmThreshold"
isManualSpinningMode = "Usually if we have no trigger events that means engine is stopped"
twoWireBatchInjection = "This is needed if your coils are individually wired and you wish to use batch injection."
useOnlyRisingEdgeForTrigger = "VR sensors are only precise on rising front"
@ -6781,8 +6780,7 @@ dialog = electronic_throttleDialog, "electronic_throttle"
dialog = monitoringSettings, "rusEFI Console Settings"
field = "Sensor Sniffer", sensorChartMode
field = " Threshold", sensorSnifferRpmThreshold
field = "Engine Sniffer", isEngineChartEnabled
field = " Threshold", engineSnifferRpmThreshold
field = "Engine Sniffer Threshold", engineSnifferRpmThreshold
dialog = generalSettings, "General"
field = "!https://rusefi.com/s/fuel"

16
firmware/tunerstudio/generated/rusefi_proteus_f4.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.06.18.proteus_f4.3058598599"
signature = "rusEFI 2022.06.18.proteus_f4.2465897645"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature = "rusEFI 2022.06.18.proteus_f4.3058598599" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.06.18.proteus_f4.2465897645" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 16:10:44 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 18:50:24 UTC 2022
pageSize = 21352
page = 1
@ -593,7 +593,7 @@ fuelClosedLoopCorrectionEnabled = bits, U32, 1340, [1:1], "false", "true"
isVerboseIAC = bits, U32, 1340, [2:2], "false", "true"
boardUseTachPullUp = bits, U32, 1340, [3:3], "5v", "12v"
boardUseTempPullUp = bits, U32, 1340, [4:4], "Piggyback Mode", "With Pull Ups"
isEngineChartEnabled = bits, U32, 1340, [5:5], "false", "true"
unused234234234 = bits, U32, 1340, [5:5], "false", "true"
silentTriggerError = bits, U32, 1340, [6:6], "false", "true"
useLinearCltSensor = bits, U32, 1340, [7:7], "false", "true"
canReadEnabled = bits, U32, 1340, [8:8], "false", "true"
@ -1579,7 +1579,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve"
enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration."
stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor."
verboseVVTDecoding = "enable vvt_details"
verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold"
invertCamVVTSignal = "get invertCamVVTSignal"
consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only"
useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss"
@ -1639,7 +1639,6 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
gpPwmNote4 = "gpPwmNote 4"
fuelClosedLoopCorrectionEnabled = "Enables lambda sensor closed loop feedback for fuelling."
isVerboseIAC = "Print details into rusEFI console"
isEngineChartEnabled = "This options enables data for 'engine sniffer' tab in console, which comes at some CPU price"
silentTriggerError = "Sometimes we have a performance issue while printing error"
canReadEnabled = "enable can_read/disable can_read"
canWriteEnabled = "enable can_write/disable can_write"
@ -1661,7 +1660,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
verboseTriggerSynchDetails = "enable trigger_details"
verboseTriggerSynchDetails = "Verbose info in console below engineSnifferRpmThreshold"
isManualSpinningMode = "Usually if we have no trigger events that means engine is stopped"
twoWireBatchInjection = "This is needed if your coils are individually wired and you wish to use batch injection."
useOnlyRisingEdgeForTrigger = "VR sensors are only precise on rising front"
@ -6751,8 +6750,7 @@ dialog = electronic_throttleDialog, "electronic_throttle"
dialog = monitoringSettings, "rusEFI Console Settings"
field = "Sensor Sniffer", sensorChartMode
field = " Threshold", sensorSnifferRpmThreshold
field = "Engine Sniffer", isEngineChartEnabled
field = " Threshold", engineSnifferRpmThreshold
field = "Engine Sniffer Threshold", engineSnifferRpmThreshold
dialog = generalSettings, "General"
field = "!https://rusefi.com/s/fuel"

16
firmware/tunerstudio/generated/rusefi_proteus_f7.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.06.18.proteus_f7.3058598599"
signature = "rusEFI 2022.06.18.proteus_f7.2465897645"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature = "rusEFI 2022.06.18.proteus_f7.3058598599" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.06.18.proteus_f7.2465897645" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 16:10:42 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 18:50:22 UTC 2022
pageSize = 21352
page = 1
@ -593,7 +593,7 @@ fuelClosedLoopCorrectionEnabled = bits, U32, 1340, [1:1], "false", "true"
isVerboseIAC = bits, U32, 1340, [2:2], "false", "true"
boardUseTachPullUp = bits, U32, 1340, [3:3], "5v", "12v"
boardUseTempPullUp = bits, U32, 1340, [4:4], "Piggyback Mode", "With Pull Ups"
isEngineChartEnabled = bits, U32, 1340, [5:5], "false", "true"
unused234234234 = bits, U32, 1340, [5:5], "false", "true"
silentTriggerError = bits, U32, 1340, [6:6], "false", "true"
useLinearCltSensor = bits, U32, 1340, [7:7], "false", "true"
canReadEnabled = bits, U32, 1340, [8:8], "false", "true"
@ -1579,7 +1579,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve"
enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration."
stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor."
verboseVVTDecoding = "enable vvt_details"
verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold"
invertCamVVTSignal = "get invertCamVVTSignal"
consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only"
useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss"
@ -1639,7 +1639,6 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
gpPwmNote4 = "gpPwmNote 4"
fuelClosedLoopCorrectionEnabled = "Enables lambda sensor closed loop feedback for fuelling."
isVerboseIAC = "Print details into rusEFI console"
isEngineChartEnabled = "This options enables data for 'engine sniffer' tab in console, which comes at some CPU price"
silentTriggerError = "Sometimes we have a performance issue while printing error"
canReadEnabled = "enable can_read/disable can_read"
canWriteEnabled = "enable can_write/disable can_write"
@ -1661,7 +1660,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
verboseTriggerSynchDetails = "enable trigger_details"
verboseTriggerSynchDetails = "Verbose info in console below engineSnifferRpmThreshold"
isManualSpinningMode = "Usually if we have no trigger events that means engine is stopped"
twoWireBatchInjection = "This is needed if your coils are individually wired and you wish to use batch injection."
useOnlyRisingEdgeForTrigger = "VR sensors are only precise on rising front"
@ -6751,8 +6750,7 @@ dialog = electronic_throttleDialog, "electronic_throttle"
dialog = monitoringSettings, "rusEFI Console Settings"
field = "Sensor Sniffer", sensorChartMode
field = " Threshold", sensorSnifferRpmThreshold
field = "Engine Sniffer", isEngineChartEnabled
field = " Threshold", engineSnifferRpmThreshold
field = "Engine Sniffer Threshold", engineSnifferRpmThreshold
dialog = generalSettings, "General"
field = "!https://rusefi.com/s/fuel"

16
firmware/tunerstudio/generated/rusefi_proteus_h7.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.06.18.proteus_h7.3058598599"
signature = "rusEFI 2022.06.18.proteus_h7.2465897645"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature = "rusEFI 2022.06.18.proteus_h7.3058598599" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.06.18.proteus_h7.2465897645" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 16:10:45 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 18:50:25 UTC 2022
pageSize = 21352
page = 1
@ -593,7 +593,7 @@ fuelClosedLoopCorrectionEnabled = bits, U32, 1340, [1:1], "false", "true"
isVerboseIAC = bits, U32, 1340, [2:2], "false", "true"
boardUseTachPullUp = bits, U32, 1340, [3:3], "5v", "12v"
boardUseTempPullUp = bits, U32, 1340, [4:4], "Piggyback Mode", "With Pull Ups"
isEngineChartEnabled = bits, U32, 1340, [5:5], "false", "true"
unused234234234 = bits, U32, 1340, [5:5], "false", "true"
silentTriggerError = bits, U32, 1340, [6:6], "false", "true"
useLinearCltSensor = bits, U32, 1340, [7:7], "false", "true"
canReadEnabled = bits, U32, 1340, [8:8], "false", "true"
@ -1579,7 +1579,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve"
enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration."
stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor."
verboseVVTDecoding = "enable vvt_details"
verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold"
invertCamVVTSignal = "get invertCamVVTSignal"
consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only"
useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss"
@ -1639,7 +1639,6 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
gpPwmNote4 = "gpPwmNote 4"
fuelClosedLoopCorrectionEnabled = "Enables lambda sensor closed loop feedback for fuelling."
isVerboseIAC = "Print details into rusEFI console"
isEngineChartEnabled = "This options enables data for 'engine sniffer' tab in console, which comes at some CPU price"
silentTriggerError = "Sometimes we have a performance issue while printing error"
canReadEnabled = "enable can_read/disable can_read"
canWriteEnabled = "enable can_write/disable can_write"
@ -1661,7 +1660,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
verboseTriggerSynchDetails = "enable trigger_details"
verboseTriggerSynchDetails = "Verbose info in console below engineSnifferRpmThreshold"
isManualSpinningMode = "Usually if we have no trigger events that means engine is stopped"
twoWireBatchInjection = "This is needed if your coils are individually wired and you wish to use batch injection."
useOnlyRisingEdgeForTrigger = "VR sensors are only precise on rising front"
@ -6751,8 +6750,7 @@ dialog = electronic_throttleDialog, "electronic_throttle"
dialog = monitoringSettings, "rusEFI Console Settings"
field = "Sensor Sniffer", sensorChartMode
field = " Threshold", sensorSnifferRpmThreshold
field = "Engine Sniffer", isEngineChartEnabled
field = " Threshold", engineSnifferRpmThreshold
field = "Engine Sniffer Threshold", engineSnifferRpmThreshold
dialog = generalSettings, "General"
field = "!https://rusefi.com/s/fuel"

16
firmware/tunerstudio/generated/rusefi_subaru_eg33_f7.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.06.18.subaru_eg33_f7.1615887961"
signature = "rusEFI 2022.06.18.subaru_eg33_f7.1155817523"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature = "rusEFI 2022.06.18.subaru_eg33_f7.1615887961" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.06.18.subaru_eg33_f7.1155817523" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on config/boards/subaru_eg33/config/gen_subaru_config.sh integration/rusefi_config.txt Sat Jun 18 16:10:58 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on config/boards/subaru_eg33/config/gen_subaru_config.sh integration/rusefi_config.txt Sat Jun 18 18:50:38 UTC 2022
pageSize = 21352
page = 1
@ -593,7 +593,7 @@ fuelClosedLoopCorrectionEnabled = bits, U32, 1340, [1:1], "false", "true"
isVerboseIAC = bits, U32, 1340, [2:2], "false", "true"
boardUseTachPullUp = bits, U32, 1340, [3:3], "5v", "12v"
boardUseTempPullUp = bits, U32, 1340, [4:4], "Piggyback Mode", "With Pull Ups"
isEngineChartEnabled = bits, U32, 1340, [5:5], "false", "true"
unused234234234 = bits, U32, 1340, [5:5], "false", "true"
silentTriggerError = bits, U32, 1340, [6:6], "false", "true"
useLinearCltSensor = bits, U32, 1340, [7:7], "false", "true"
canReadEnabled = bits, U32, 1340, [8:8], "false", "true"
@ -1579,7 +1579,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve"
enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration."
stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor."
verboseVVTDecoding = "enable vvt_details"
verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold"
invertCamVVTSignal = "get invertCamVVTSignal"
consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only"
useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss"
@ -1639,7 +1639,6 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
gpPwmNote4 = "gpPwmNote 4"
fuelClosedLoopCorrectionEnabled = "Enables lambda sensor closed loop feedback for fuelling."
isVerboseIAC = "Print details into rusEFI console"
isEngineChartEnabled = "This options enables data for 'engine sniffer' tab in console, which comes at some CPU price"
silentTriggerError = "Sometimes we have a performance issue while printing error"
canReadEnabled = "enable can_read/disable can_read"
canWriteEnabled = "enable can_write/disable can_write"
@ -1661,7 +1660,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
verboseTriggerSynchDetails = "enable trigger_details"
verboseTriggerSynchDetails = "Verbose info in console below engineSnifferRpmThreshold"
isManualSpinningMode = "Usually if we have no trigger events that means engine is stopped"
twoWireBatchInjection = "This is needed if your coils are individually wired and you wish to use batch injection."
useOnlyRisingEdgeForTrigger = "VR sensors are only precise on rising front"
@ -6775,8 +6774,7 @@ dialog = electronic_throttleDialog, "electronic_throttle"
dialog = monitoringSettings, "rusEFI Console Settings"
field = "Sensor Sniffer", sensorChartMode
field = " Threshold", sensorSnifferRpmThreshold
field = "Engine Sniffer", isEngineChartEnabled
field = " Threshold", engineSnifferRpmThreshold
field = "Engine Sniffer Threshold", engineSnifferRpmThreshold
dialog = generalSettings, "General"
field = "!https://rusefi.com/s/fuel"

16
firmware/tunerstudio/generated/rusefi_tdg-pdm8.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.06.18.tdg-pdm8.3242805695"
signature = "rusEFI 2022.06.18.tdg-pdm8.3858585557"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature = "rusEFI 2022.06.18.tdg-pdm8.3242805695" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.06.18.tdg-pdm8.3858585557" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 16:10:52 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 18:50:32 UTC 2022
pageSize = 21352
page = 1
@ -593,7 +593,7 @@ fuelClosedLoopCorrectionEnabled = bits, U32, 1340, [1:1], "false", "true"
isVerboseIAC = bits, U32, 1340, [2:2], "false", "true"
boardUseTachPullUp = bits, U32, 1340, [3:3], "5v", "12v"
boardUseTempPullUp = bits, U32, 1340, [4:4], "Piggyback Mode", "With Pull Ups"
isEngineChartEnabled = bits, U32, 1340, [5:5], "false", "true"
unused234234234 = bits, U32, 1340, [5:5], "false", "true"
silentTriggerError = bits, U32, 1340, [6:6], "false", "true"
useLinearCltSensor = bits, U32, 1340, [7:7], "false", "true"
canReadEnabled = bits, U32, 1340, [8:8], "false", "true"
@ -1579,7 +1579,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve"
enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration."
stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor."
verboseVVTDecoding = "enable vvt_details"
verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold"
invertCamVVTSignal = "get invertCamVVTSignal"
consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only"
useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss"
@ -1639,7 +1639,6 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
gpPwmNote4 = "gpPwmNote 4"
fuelClosedLoopCorrectionEnabled = "Enables lambda sensor closed loop feedback for fuelling."
isVerboseIAC = "Print details into rusEFI console"
isEngineChartEnabled = "This options enables data for 'engine sniffer' tab in console, which comes at some CPU price"
silentTriggerError = "Sometimes we have a performance issue while printing error"
canReadEnabled = "enable can_read/disable can_read"
canWriteEnabled = "enable can_write/disable can_write"
@ -1661,7 +1660,7 @@ tcu_32Vals = array, U08, 21344, [8], "%", 1, 0, 0, 255, 0
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
verboseTriggerSynchDetails = "enable trigger_details"
verboseTriggerSynchDetails = "Verbose info in console below engineSnifferRpmThreshold"
isManualSpinningMode = "Usually if we have no trigger events that means engine is stopped"
twoWireBatchInjection = "This is needed if your coils are individually wired and you wish to use batch injection."
useOnlyRisingEdgeForTrigger = "VR sensors are only precise on rising front"
@ -6786,8 +6785,7 @@ dialog = electronic_throttleDialog, "electronic_throttle"
dialog = monitoringSettings, "rusEFI Console Settings"
field = "Sensor Sniffer", sensorChartMode
field = " Threshold", sensorSnifferRpmThreshold
field = "Engine Sniffer", isEngineChartEnabled
field = " Threshold", engineSnifferRpmThreshold
field = "Engine Sniffer Threshold", engineSnifferRpmThreshold
dialog = generalSettings, "General"
field = "!https://rusefi.com/s/fuel"

12
java_console/models/src/main/java/com/rusefi/config/generated/Fields.java
View File

@ -1,6 +1,6 @@
package com.rusefi.config.generated;
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 16:11:00 UTC 2022
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Jun 18 18:50:40 UTC 2022
// by class com.rusefi.output.FileJavaFieldsConsumer
import com.rusefi.config.*;
@ -1500,7 +1500,6 @@ public class Fields {
public static final int isCJ125Verbose_offset = 100;
public static final int isCylinderCleanupEnabled_offset = 1352;
public static final int isDoubleSolenoidIdle_offset = 100;
public static final int isEngineChartEnabled_offset = 1340;
public static final int isEngineControlEnabled_offset = 744;
public static final int isFasterEngineSpinUpEnabled_offset = 744;
public static final int isForcedInduction_offset = 100;
@ -1873,7 +1872,7 @@ public class Fields {
public static final int servoOutputPins7_offset = 2066;
public static final int servoOutputPins8_offset = 2068;
public static final int showHumanReadableWarning_offset = 940;
public static final int SIGNATURE_HASH = 1799456747;
public static final int SIGNATURE_HASH = 1341495681;
public static final int silentTriggerError_offset = 1340;
public static final int skippedWheelOnCam_offset = 1340;
public static final int slowAdcAlpha_offset = 1580;
@ -2361,7 +2360,7 @@ public class Fields {
public static final int TS_RESPONSE_UNDERRUN = 0x80;
public static final int TS_RESPONSE_UNRECOGNIZED_COMMAND = 0x83;
public static final char TS_SET_LOGGER_SWITCH = 'l';
public static final String TS_SIGNATURE = "rusEFI 2022.06.18.all.1799456747";
public static final String TS_SIGNATURE = "rusEFI 2022.06.18.all.1341495681";
public static final char TS_SINGLE_WRITE_COMMAND = 'W';
public static final char TS_TEST_COMMAND = 't';
public static final int TS_TOTAL_OUTPUT_SIZE = 1016;
@ -2402,6 +2401,7 @@ public class Fields {
public static final int unused1740b0_offset = 1608;
public static final int unused1740b1_offset = 1608;
public static final int unused1740b2_offset = 1608;
public static final int unused234234234_offset = 1340;
public static final int unused4080_offset = 3029;
public static final int unused460_offset = 460;
public static final int unused688_offset = 688;
@ -3121,7 +3121,7 @@ public class Fields {
public static final Field ISVERBOSEIAC = Field.create("ISVERBOSEIAC", 1340, FieldType.BIT, 2);
public static final Field BOARDUSETACHPULLUP = Field.create("BOARDUSETACHPULLUP", 1340, FieldType.BIT, 3);
public static final Field BOARDUSETEMPPULLUP = Field.create("BOARDUSETEMPPULLUP", 1340, FieldType.BIT, 4);
public static final Field ISENGINECHARTENABLED = Field.create("ISENGINECHARTENABLED", 1340, FieldType.BIT, 5);
public static final Field UNUSED234234234 = Field.create("UNUSED234234234", 1340, FieldType.BIT, 5);
public static final Field SILENTTRIGGERERROR = Field.create("SILENTTRIGGERERROR", 1340, FieldType.BIT, 6);
public static final Field USELINEARCLTSENSOR = Field.create("USELINEARCLTSENSOR", 1340, FieldType.BIT, 7);
public static final Field CANREADENABLED = Field.create("CANREADENABLED", 1340, FieldType.BIT, 8);
@ -4487,7 +4487,7 @@ public class Fields {
ISVERBOSEIAC,
BOARDUSETACHPULLUP,
BOARDUSETEMPPULLUP,
ISENGINECHARTENABLED,
UNUSED234234234,
SILENTTRIGGERERROR,
USELINEARCLTSENSOR,
CANREADENABLED,