auto-sync

firmware/config/engines/mazda_miata.cpp

@@ -256,6 +256,11 @@ void setFordEscortGt(engine_configuration_s *engineConfiguration) {
 	boardConfiguration->triggerInputPins[0] = GPIOC_6;
 	boardConfiguration->triggerInputPins[1] = GPIOA_5; // 2E White CKP
 
+	// Denso 195500-2180
+	engineConfiguration->injector.flow = 265;
+
+	engineConfiguration->hasBaroSensor = false;
+	engineConfiguration->hasMapSensor = true;
 	engineConfiguration->map.sensor.type = MT_DENSO183;
 
 	// set_global_trigger_offset_angle 659

firmware/controllers/algo/lcd_menu_tree.h

@@ -14,6 +14,7 @@ typedef enum {
 	LL_ALGORITHM,
 	LL_INJECTION,
 	LL_IGNITION,
+	LL_ING_FLOW,
 
 	LL_RPM,
 	LL_TRIGGER_ERRORS,
@@ -21,10 +22,13 @@ typedef enum {
 
 	LL_CLT_TEMPERATURE,
 	LL_IAT_TEMPERATURE,
+	LL_AFR,
 	LL_TPS,
 	LL_VBATT,
 	LL_MAF,
 	LL_MAP,
+	LL_MAF_V,
+	LL_MAF_KG_HR,
 	LL_EGO,
 	LL_BARO,
 

firmware/controllers/lcd_controller.cpp

@@ -45,7 +45,10 @@ static MenuItem miIat(&miSensors, LL_IAT_TEMPERATURE);
 static MenuItem miTps(&miSensors, LL_TPS);
 static MenuItem miVBatt(&miSensors, LL_VBATT);
 static MenuItem miMap(&miSensors, LL_MAP);
+static MenuItem miAfr(&miSensors, LL_AFR);
 static MenuItem miBaro(&miSensors, LL_BARO);
+static MenuItem miMapV(&miSensors, LL_MAF_V);
+static MenuItem miMapKgHr(&miSensors, LL_MAF_KG_HR);
 
 static MenuItem miStopEngine(&miBench, "stop engine", stopEngine);
 static MenuItem miTestFan(&miBench, "test fan", fanBench);
@@ -64,6 +67,7 @@ static MenuItem miConfig(&miAbout, LL_CONFIG);
 static MenuItem miAlgo(&miAbout, LL_ALGORITHM);
 static MenuItem miInjection(&miAbout, LL_INJECTION);
 static MenuItem miIgnition(&miAbout, LL_IGNITION);
+static MenuItem miInjFlow(&miAbout, LL_ING_FLOW);
 
 #define DISP_LINES (engineConfiguration->HD44780height - 1)
 
@@ -208,6 +212,9 @@ static void showLine(lcd_line_e line) {
 	case LL_INJECTION:
 		lcdPrintf(getInjection_mode_e(engineConfiguration->injectionMode));
 		return;
+	case LL_ING_FLOW:
+		lcdPrintf("Inj %fcc", engineConfiguration->injector.flow);
+		return;
 	case LL_IGNITION:
 		lcdPrintf(getIgnition_mode_e(engineConfiguration->ignitionMode));
 		return;
@@ -219,16 +226,37 @@ static void showLine(lcd_line_e line) {
 		return;
 	case LL_BARO:
 		if (engineConfiguration->hasBaroSensor) {
-			lcdPrintf("Baro: none");
-		} else {
 			lcdPrintf("Baro: %f", getBaroPressure());
+		} else {
+			lcdPrintf("Baro: none");
+		}
+		return;
+	case LL_AFR:
+		if (engineConfiguration->hasAfrSensor) {
+			lcdPrintf("AFR: %f", getAfr());
+		} else {
+			lcdPrintf("AFR: none");
 		}
 		return;
 	case LL_MAP:
 		if (engineConfiguration->hasMapSensor) {
-			lcdPrintf("MAP: none");
+			lcdPrintf("MAP %f", getMap());
 		} else {
-			lcdPrintf("MAP %s", getMap());
+			lcdPrintf("MAP: none");
+		}
+		return;
+	case LL_MAF_V:
+		if (engineConfiguration->hasMafSensor) {
+			lcdPrintf("MAF: %fv", getMaf());
+		} else {
+			lcdPrintf("MAF: none");
+		}
+		return;
+	case LL_MAF_KG_HR:
+		if (engineConfiguration->hasMafSensor) {
+			lcdPrintf("MAF: %f kg/hr", getRealMaf());
+		} else {
+			lcdPrintf("MAF: none");
 		}
 		return;
 	case LL_TRIGGER_ERRORS:

firmware/controllers/sensors/maf.cpp

@@ -6,6 +6,9 @@
 EXTERN_ENGINE
 ;
 
+/**
+ * @return MAF sensor voltage
+ */
 float getMaf(DECLARE_ENGINE_PARAMETER_F) {
 	return getMafT(engineConfiguration);
 }

firmware/svnversion.h

@@ -1,6 +1,5 @@
 // This file was generated by Version2Header
-// Sat Jan 31 16:18:01 EST 2015
+// Fri Feb 13 20:54:42 EST 2015
 #ifndef VCS_VERSION
-#define VCS_VERSION "6619"
+#define VCS_VERSION "6833"
 #endif
-

firmware/tunerstudio/rusefi.ini

@@ -676,6 +676,15 @@ fileVersion = { 20150211 }
       gridOrient  = 250,   0, 340 ; Space 123 rotation of grid in degrees.
       upDownLabel = "(RICHER)", "(LEANER)"
 
+   table = ve2TableTbl,  ve2TableMap,  "VE2 Table",   1
+      ;       constant, variable
+      xBins       = ve2RpmBins,  rpm
+      yBins       = ve2LoadBins,  engineLoad
+      zBins       = ve2Table
+;      gridHeight  = 2.0
+      gridOrient  = 250,   0, 340 ; Space 123 rotation of grid in degrees.
+      upDownLabel = "(RICHER)", "(LEANER)"
+
    table = injPhaseTableTbl,  injPhaseTableMap,  "Injection Phase Table",   1
       ;       constant, variable
       xBins       = injPhaseRpmBins,  rpm
@@ -828,6 +837,7 @@ fileVersion = { 20150211 }
 		subMenu = iatFuelCorrCurve,			"Intake air temp fuel correction"
 		subMenu = cltFuelCorrCurve,			"Coolant temp fuel correction"
         subMenu = veTableTbl,           	"VE Table", {algorithm == 3}           
+        subMenu = ve2TableTbl,           	"VE2 Table"         
         subMenu = afrTableTbl,          	"Targe AFR Table", {algorithm == 3}
         subMenu = injPhaseTableTbl,         "Injection Phase"           
 		subMenu = std_separator
@@ -842,6 +852,7 @@ fileVersion = { 20150211 }
       subMenu = ignitionTableMap,       	"Ignition Map"           
       subMenu = fuelTableMap,           	"Fuel Table"           
       subMenu = veTableMap,             	"VE Table"           
+      subMenu = ve2TableMap,             	"VE2 Table"           
       subMenu = afrTableMap,            	"Targe AFR Table"
       subMenu = injPhaseTableMap,           "Injection Phase"