From fadaf2bf4934c89506e345817d20d183cab43b4e Mon Sep 17 00:00:00 2001
From: rusefi <rusefillc@gmail.com>
Date: Sun, 25 Apr 2021 21:53:56 -0400
Subject: [PATCH] support multiple VVT sensors #885

---
 firmware/integration/rusefi_config.txt | 2 ++
 firmware/tunerstudio/rusefi.input      | 9 +++++++++
 2 files changed, 11 insertions(+)

diff --git a/firmware/integration/rusefi_config.txt b/firmware/integration/rusefi_config.txt
index ba5e56ae45..0c001f3ed0 100644
--- a/firmware/integration/rusefi_config.txt
+++ b/firmware/integration/rusefi_config.txt
@@ -1650,10 +1650,12 @@ end_struct
 
 #define GAUGE_NAME_VERSION "firmware"
 #define GAUGE_NAME_TRG_ERR "trg err"
+
 #define GAUGE_NAME_VVT "VVT position"
 #define GAUGE_NAME_SECOND_VVT_BANK_1 "VVT second position bank 1"
 #define GAUGE_NAME_VVT_BANK_2 "VVT position bank 2"
 #define GAUGE_NAME_SECOND_VVT_BANK_2 "VVT second position bank 2"
+
 #define GAUGE_NAME_TIMING_ADVANCE "timing"
 #define GAUGE_NAME_VVS "Vehicle Speed"
 #define GAUGE_NAME_VBAT "VBatt"
diff --git a/firmware/tunerstudio/rusefi.input b/firmware/tunerstudio/rusefi.input
index 6a13cbed3c..800a393f0b 100644
--- a/firmware/tunerstudio/rusefi.input
+++ b/firmware/tunerstudio/rusefi.input
@@ -398,6 +398,9 @@ enable2ndByteCanID = false
 	VssAcceleration = scalar,  S16,     284,      "m/s2", {1/@@PACK_MULT_MS@@}, 0.0
 	lambdaValue2    = scalar,  U16,     286,      "",{1/@@PACK_MULT_LAMBDA@@},       0.0
 	AFRValue2       = scalar,  U16,     288,      "AFR",{1/@@PACK_MULT_AFR@@},       0.0
+	secondVvtPositionBank1=scalar,U16,  290,      "deg",{1/@@PACK_MULT_ANGLE@@},         0
+	vvtPositionBank2= scalar,  U16,     292,      "deg",{1/@@PACK_MULT_ANGLE@@},         0
+	secondVvtPositionBank2=scalar,U16,  294,      "deg",{1/@@PACK_MULT_ANGLE@@},         0
 
 ;
 ; see TunerStudioOutputChannels struct
@@ -1026,6 +1029,9 @@ gaugeCategory = Sensors - Extra 1
    accelerationYGauge = accelerationY,       @@GAUGE_NAME_ACCEL_Y@@,      "acc",        -11,   11,     1.0,    1.2,      100,    100,   3, 1
    atmPresCGauge     = baroPressure,          @@GAUGE_NAME_BARO_PRESSURE@@,       "kPa",        0,   1024,       0,      0,       0,     0,   0,   0
    vvtPositionGauge = vvtPosition, @@GAUGE_NAME_VVT@@, "deg",     0,   100,     0,    0,    720,  720,   0,   0
+   secondVvtPositionBank1Gauge=secondVvtPositionBank1, @@GAUGE_NAME_VVT_BANK_1@@, "deg",     0,   100,     0,    0,    720,  720,   0,   0
+   vvtPositionBank2Gauge=vvtPositionBank2, @@GAUGE_NAME_VVT_BANK_2@@, "deg",     0,   100,     0,    0,    720,  720,   0,   0
+   secondVvtPositionBank2Gauge=secondVvtPositionBank2, @@GAUGE_NAME_VVT_BANK_2@@, "deg",     0,   100,     0,    0,    720,  720,   0,   0
    internalMcuTemperatureGauge = internalMcuTemperature, @@GAUGE_NAME_ECU_TEMPERATURE@@, "C",     0,   100,     0,    0,    75,  100,   0,   0
    OilPressGauge   	 = oilPressure,   @@GAUGE_NAME_OIL_PRESSURE@@,       @@GAUGE_NAME_OIL_PRESSURE_UNITS@@,        0,    750,      35,     75,     550,   700,   0,   0	
    idleAirValvePositionGauge = idleAirValvePosition, "Idle position", "%",     0,   100,     0,    0,    100,  100,   1,   1
@@ -1290,6 +1296,9 @@ gaugeCategory = DynoView
 
    entry = sparkDwellValue,	@@GAUGE_COIL_DWELL_TIME@@, float,"%.3f"
    entry = vvtPosition, @@GAUGE_NAME_VVT@@, float,"%.2f"
+   entry = vvtPositionBank2,@@GAUGE_NAME_VVT_BANK_2@@, float,"%.2f"
+   entry = secondVvtPositionBank1,@@GAUGE_NAME_SECOND_VVT_BANK_1@@, float,"%.2f"
+   entry = secondVvtPositionBank2,@@GAUGE_NAME_SECOND_VVT_BANK_2@@, float,"%.2f"
    entry = injectionOffset, "injOffset"  , float, "%.2F"
 
 ; is there a way to log parameter?   entry = debugMode,   "debugMode",int,"%d"