rusefi
/
rusefi-1
mirror of https://github.com/rusefi/rusefi-1.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

v12

This commit is contained in:
rusEfi 2019-11-29 01:35:45 -05:00
parent 316d7ab63b
commit fb53d2e921
2 changed files with 19 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

18
firmware/config/engines/bmw_m73.cpp
View File

@ -140,8 +140,8 @@ E_4: running
Good GPIO:
GPIOC_9 ETB#1
GPIOC_8 ETB#1
GPIOB_8
GPIOB_9
GPIOB_8 ETB#2
GPIOB_9 ETB#2
GPIOC_5
GPIOA_7
GPIOA_6
@ -156,7 +156,9 @@ GPIOA_6
/**
* Yellow op-amp board
*
* AN6 tested pull-down 1M
* AN5 tested pull-down 1M PA3 TPS1
* AN6 tested pull-down 1M PA4 TPS2
* AN7 tested pull-down 1M PPS
* AN8 tested no pull-down / no pull-up
*/
@ -166,6 +168,11 @@ GPIOA_6
// ETB motor NEG pin # - white wire - OUT 1
engineConfiguration->throttlePedalPositionAdcChannel = EFI_ADC_7;
// set_analog_input_pin tps PA3
engineConfiguration->tps1_1AdcChannel = EFI_ADC_3; // PA3
// set_analog_input_pin tps2 PA3
engineConfiguration->tps2_1AdcChannel = EFI_ADC_4; // PA4
// PWM pin
boardConfiguration->etb1.controlPin1 = GPIO_UNASSIGNED;
// DIR pin
@ -173,6 +180,11 @@ GPIOA_6
boardConfiguration->etb1.directionPin2 = GPIOC_8;
CONFIG(etb1_use_two_wires) = true;
// PWM pin
engineConfiguration->etb2.controlPin1 = GPIO_UNASSIGNED;
// DIR pin
engineConfiguration->etb2.directionPin1 = GPIOB_8;
engineConfiguration->etb2.directionPin2 = GPIOB_9;
CONFIG(etb2_use_two_wires) = true;

5
firmware/controllers/settings.cpp
View File

@ -818,7 +818,10 @@ static void setAnalogInputPin(const char *sensorStr, const char *pinName) {
scheduleMsg(&logger, "setting IAT to %s/%d", pinName, channel);
} else if (strEqual("tps", sensorStr)) {
engineConfiguration->tps1_1AdcChannel = channel;
scheduleMsg(&logger, "setting TPS to %s/%d", pinName, channel);
scheduleMsg(&logger, "setting TPS1 to %s/%d", pinName, channel);
} else if (strEqual("tps2", sensorStr)) {
engineConfiguration->tps2_1AdcChannel = channel;
scheduleMsg(&logger, "setting TPS2 to %s/%d", pinName, channel);
}
incrementGlobalConfigurationVersion(PASS_ENGINE_PARAMETER_SIGNATURE);
}