rusefi
/
rusefi-1
mirror of https://github.com/rusefi/rusefi-1.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Fresh generated - auto

This commit is contained in:
rusefi 2020-05-01 17:36:33 -04:00
parent 04671403e2
commit feff6a2ae2
8 changed files with 20 additions and 18 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
firmware/config/boards/kinetis/config/controllers/algo/engine_configuration_generated_structures.h
View File

@ -1,4 +1,4 @@
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on kineris_gen_config.bat integration/rusefi_config.txt Thu Apr 30 19:42:32 EDT 2020
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on kineris_gen_config.bat integration/rusefi_config.txt Fri May 01 17:34:40 EDT 2020
// by class com.rusefi.output.CHeaderConsumer
// begin
#ifndef CONFIG_BOARDS_KINETIS_CONFIG_CONTROLLERS_ALGO_ENGINE_CONFIGURATION_GENERATED_STRUCTURES_H
@ -676,7 +676,8 @@ struct engine_configuration_s {
offset 76 bit 9 */
bool isCJ125Verbose : 1;
/**
* Is your UA CJ125 output wired to MCU via resistor divider?
* Is your UA CJ125 output wired to MCU via resistor divider? Ua can go over 3.3v but only at lambda >3, i.e very lean AFR above 44.1
* When exposed to free air and 17x gain, Ua will be 4.17 volt
offset 76 bit 10 */
bool cj125isUaDivided : 1;
/**
@ -3415,4 +3416,4 @@ typedef struct persistent_config_s persistent_config_s;
#endif
// end
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on kineris_gen_config.bat integration/rusefi_config.txt Thu Apr 30 19:42:32 EDT 2020
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on kineris_gen_config.bat integration/rusefi_config.txt Fri May 01 17:34:40 EDT 2020

7
firmware/controllers/generated/engine_configuration_generated_structures.h
View File

@ -1,4 +1,4 @@
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.bat integration\rusefi_config.txt Thu Apr 30 19:40:29 EDT 2020
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.bat integration\rusefi_config.txt Fri May 01 17:30:00 EDT 2020
// by class com.rusefi.output.CHeaderConsumer
// begin
#ifndef CONTROLLERS_GENERATED_ENGINE_CONFIGURATION_GENERATED_STRUCTURES_H
@ -676,7 +676,8 @@ struct engine_configuration_s {
offset 76 bit 9 */
bool isCJ125Verbose : 1;
/**
* Is your UA CJ125 output wired to MCU via resistor divider?
* Is your UA CJ125 output wired to MCU via resistor divider? Ua can go over 3.3v but only at lambda >3, i.e very lean AFR above 44.1
* When exposed to free air and 17x gain, Ua will be 4.17 volt
offset 76 bit 10 */
bool cj125isUaDivided : 1;
/**
@ -3415,4 +3416,4 @@ typedef struct persistent_config_s persistent_config_s;
#endif
// end
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.bat integration\rusefi_config.txt Thu Apr 30 19:40:29 EDT 2020
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.bat integration\rusefi_config.txt Fri May 01 17:30:00 EDT 2020

4
firmware/tunerstudio/rusefi.ini
View File

@ -89,7 +89,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.bat integration\rusefi_config.txt Thu Apr 30 19:40:29 EDT 2020
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.bat integration\rusefi_config.txt Fri May 01 17:30:00 EDT 2020
pageSize = 20000
page = 1
@ -1164,7 +1164,7 @@ page = 1
; total TS size = 20000
[SettingContextHelp]
injector_flow = "This is your injector flow at the fuel pressure used in the vehicle. cc/min, cubic centimetre per minute\nBy the way, g/s = 0.125997881 * (lb/hr)\ng/s = 0.125997881 * (cc/min)/10.5\ng/s = 0.0119997981 * cc/min"
cj125isUaDivided = "Is your UA CJ125 output wired to MCU via resistor divider?"
cj125isUaDivided = "Is your UA CJ125 output wired to MCU via resistor divider? Ua can go over 3.3v but only at lambda >3, i.e very lean AFR above 44.1\nWhen exposed to free air and 17x gain, Ua will be 4.17 volt"
etb_use_two_wires = "TLE7209 uses two-wire mode. TLE9201 and VNH2SP30 do NOT use two wire mode."
cj125isUrDivided = "Is your UR CJ125 output wired to MCU via resistor divider?\nLooks like 3v range should be enough, divider generally not needed."
absoluteFuelPressure = "If your fuel regulator does not have vacuum line"

4
firmware/tunerstudio/rusefi_frankenso.ini
View File

@ -89,7 +89,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.bat integration\rusefi_config.txt Thu Apr 30 19:42:20 EDT 2020
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.bat integration\rusefi_config.txt Fri May 01 17:34:06 EDT 2020
pageSize = 20000
page = 1
@ -1164,7 +1164,7 @@ page = 1
; total TS size = 20000
[SettingContextHelp]
injector_flow = "This is your injector flow at the fuel pressure used in the vehicle. cc/min, cubic centimetre per minute\nBy the way, g/s = 0.125997881 * (lb/hr)\ng/s = 0.125997881 * (cc/min)/10.5\ng/s = 0.0119997981 * cc/min"
cj125isUaDivided = "Is your UA CJ125 output wired to MCU via resistor divider?"
cj125isUaDivided = "Is your UA CJ125 output wired to MCU via resistor divider? Ua can go over 3.3v but only at lambda >3, i.e very lean AFR above 44.1\nWhen exposed to free air and 17x gain, Ua will be 4.17 volt"
etb_use_two_wires = "TLE7209 uses two-wire mode. TLE9201 and VNH2SP30 do NOT use two wire mode."
cj125isUrDivided = "Is your UR CJ125 output wired to MCU via resistor divider?\nLooks like 3v range should be enough, divider generally not needed."
absoluteFuelPressure = "If your fuel regulator does not have vacuum line"

4
firmware/tunerstudio/rusefi_kinetis.ini
View File

@ -89,7 +89,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on kineris_gen_config.bat integration/rusefi_config.txt Thu Apr 30 19:42:32 EDT 2020
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on kineris_gen_config.bat integration/rusefi_config.txt Fri May 01 17:34:40 EDT 2020
pageSize = 20000
page = 1
@ -1164,7 +1164,7 @@ page = 1
; total TS size = 20000
[SettingContextHelp]
injector_flow = "This is your injector flow at the fuel pressure used in the vehicle. cc/min, cubic centimetre per minute\nBy the way, g/s = 0.125997881 * (lb/hr)\ng/s = 0.125997881 * (cc/min)/10.5\ng/s = 0.0119997981 * cc/min"
cj125isUaDivided = "Is your UA CJ125 output wired to MCU via resistor divider?"
cj125isUaDivided = "Is your UA CJ125 output wired to MCU via resistor divider? Ua can go over 3.3v but only at lambda >3, i.e very lean AFR above 44.1\nWhen exposed to free air and 17x gain, Ua will be 4.17 volt"
etb_use_two_wires = "TLE7209 uses two-wire mode. TLE9201 and VNH2SP30 do NOT use two wire mode."
cj125isUrDivided = "Is your UR CJ125 output wired to MCU via resistor divider?\nLooks like 3v range should be enough, divider generally not needed."
absoluteFuelPressure = "If your fuel regulator does not have vacuum line"

4
firmware/tunerstudio/rusefi_microrusefi.ini
View File

@ -89,7 +89,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.bat integration\rusefi_config.txt Thu Apr 30 19:41:28 EDT 2020
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.bat integration\rusefi_config.txt Fri May 01 17:32:42 EDT 2020
pageSize = 20000
page = 1
@ -1164,7 +1164,7 @@ page = 1
; total TS size = 20000
[SettingContextHelp]
injector_flow = "This is your injector flow at the fuel pressure used in the vehicle. cc/min, cubic centimetre per minute\nBy the way, g/s = 0.125997881 * (lb/hr)\ng/s = 0.125997881 * (cc/min)/10.5\ng/s = 0.0119997981 * cc/min"
cj125isUaDivided = "Is your UA CJ125 output wired to MCU via resistor divider?"
cj125isUaDivided = "Is your UA CJ125 output wired to MCU via resistor divider? Ua can go over 3.3v but only at lambda >3, i.e very lean AFR above 44.1\nWhen exposed to free air and 17x gain, Ua will be 4.17 volt"
etb_use_two_wires = "TLE7209 uses two-wire mode. TLE9201 and VNH2SP30 do NOT use two wire mode."
cj125isUrDivided = "Is your UR CJ125 output wired to MCU via resistor divider?\nLooks like 3v range should be enough, divider generally not needed."
absoluteFuelPressure = "If your fuel regulator does not have vacuum line"

4
firmware/tunerstudio/rusefi_prometheus.ini
View File

@ -89,7 +89,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.bat integration\rusefi_config.txt Thu Apr 30 19:42:26 EDT 2020
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.bat integration\rusefi_config.txt Fri May 01 17:34:09 EDT 2020
pageSize = 20000
page = 1
@ -1164,7 +1164,7 @@ page = 1
; total TS size = 20000
[SettingContextHelp]
injector_flow = "This is your injector flow at the fuel pressure used in the vehicle. cc/min, cubic centimetre per minute\nBy the way, g/s = 0.125997881 * (lb/hr)\ng/s = 0.125997881 * (cc/min)/10.5\ng/s = 0.0119997981 * cc/min"
cj125isUaDivided = "Is your UA CJ125 output wired to MCU via resistor divider?"
cj125isUaDivided = "Is your UA CJ125 output wired to MCU via resistor divider? Ua can go over 3.3v but only at lambda >3, i.e very lean AFR above 44.1\nWhen exposed to free air and 17x gain, Ua will be 4.17 volt"
etb_use_two_wires = "TLE7209 uses two-wire mode. TLE9201 and VNH2SP30 do NOT use two wire mode."
cj125isUrDivided = "Is your UR CJ125 output wired to MCU via resistor divider?\nLooks like 3v range should be enough, divider generally not needed."
absoluteFuelPressure = "If your fuel regulator does not have vacuum line"

4
firmware/tunerstudio/rusefi_proteus.ini
View File

@ -89,7 +89,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.bat integration\rusefi_config.txt Thu Apr 30 19:42:29 EDT 2020
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.bat integration\rusefi_config.txt Fri May 01 17:34:19 EDT 2020
pageSize = 20000
page = 1
@ -1164,7 +1164,7 @@ page = 1
; total TS size = 20000
[SettingContextHelp]
injector_flow = "This is your injector flow at the fuel pressure used in the vehicle. cc/min, cubic centimetre per minute\nBy the way, g/s = 0.125997881 * (lb/hr)\ng/s = 0.125997881 * (cc/min)/10.5\ng/s = 0.0119997981 * cc/min"
cj125isUaDivided = "Is your UA CJ125 output wired to MCU via resistor divider?"
cj125isUaDivided = "Is your UA CJ125 output wired to MCU via resistor divider? Ua can go over 3.3v but only at lambda >3, i.e very lean AFR above 44.1\nWhen exposed to free air and 17x gain, Ua will be 4.17 volt"
etb_use_two_wires = "TLE7209 uses two-wire mode. TLE9201 and VNH2SP30 do NOT use two wire mode."
cj125isUrDivided = "Is your UR CJ125 output wired to MCU via resistor divider?\nLooks like 3v range should be enough, divider generally not needed."
absoluteFuelPressure = "If your fuel regulator does not have vacuum line"