b906d12268
Fix gppwm properly ( #1487 )
...
* directly control output in onoff mode
* test fixing
2020-06-11 20:43:26 -04:00
76745412c6
Factor out airmass logic ( #1483 )
...
* refactor
* extract more airmass
* rename, fix tests
2020-06-06 07:25:19 -04:00
2bdd8128db
refactor ( #1481 )
2020-06-03 21:12:12 -04:00
105460dada
Remove old thermistor implementation ( #1458 )
...
* remove test clt/iat
* remove warning since this code is nearly dead
* remove old therm impl
* tests & live doc
* not quite right
2020-05-28 17:51:33 -04:00
bef53d8ba5
remove maf2map mode ( #1474 )
...
* remove
* remove fully
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-05-28 14:06:18 -04:00
c39d135e94
Makefile clean-up
2020-05-25 13:42:55 -04:00
0290a268ab
Redundant accelerator pedal ( #1470 )
...
* add second boudns
* init logic
* test changes
* reconfigure correctly
* rams
2020-05-23 19:48:32 -04:00
b11c5cd8c8
switch some firmware warnings to errors ( #1465 )
...
* warnings as errors
* throw instead of exit
* test massaging
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-05-23 10:46:28 -04:00
3ffc51f495
Clean-up analog channels in "unit" tests #1456
2020-05-20 03:54:40 -04:00
f2cf1358c1
Clean-up analog channels in "unit" tests #1456
2020-05-20 03:49:56 -04:00
f32e7c19f4
Clean-up analog channels in "unit" tests #1456
2020-05-20 03:42:09 -04:00
695c8ddb03
Clean-up analog channels in "unit" tests #1456
2020-05-20 03:38:55 -04:00
5dee5bcd6b
Merge remote-tracking branch 'origin/master'
2020-05-20 03:17:13 -04:00
44e2a1c970
remove test clt/iat ( #1457 )
...
* remove test clt/iat
* remove warning since this code is nearly dead
2020-05-20 03:16:01 -04:00
6584ebe2d8
docs
2020-05-20 03:12:23 -04:00
9dda1a21bc
Redundant tps ( #1427 )
...
* add redundant sensor
* add tests
* add configure, info printing
* tests
* tests
* partial hookup
* fix
* fix
* bad makefile merge
* use second TPS config
* update test
* update test
* sensor names
* set second pin by default
* fix auto cal
* auto cal both sensors
* add reconfigure of secondary sensors
* gobblin' up your ram
* slow down write a little bit
* put split in debug gauge
* s
Co-authored-by: Matthew Kennedy <matthew@mck-mbp-15.local>
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-05-18 14:32:00 -04:00
94e63e7c43
binary logging ( #1443 )
...
* field support
* tests
* makefiles
* test data too
* missing include dir
* write correct thing
* fix one test
* fix test
* omnomnomnom ram
* format
* use defined names
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-05-17 15:56:37 -04:00
afc763f068
better VVT progress
2020-05-15 21:33:25 -04:00
da4c7e1a2a
VVT_INACTIVE
2020-05-14 23:31:01 -04:00
e46d9f0c99
Fix 100% duty injection ( #1431 )
...
* skip turn-off for high duty
* mock executor injection
* test
* switch to hard cut
* test no longer relevant
2020-05-14 07:44:32 -04:00
1f692c4a9b
34-2 3 cam Toyota wheel progress
2020-05-10 18:03:11 -04:00
3f7ca92241
removing some unneeded flexibility
2020-05-10 02:06:15 -04:00
32ba492b48
34-2 3 cam Toyota wheel progress
2020-05-10 01:21:54 -04:00
ac9faf6646
docs & clean-up
2020-05-10 00:59:32 -04:00
e2974cfeda
short term fuel trim: part 2 ( #1405 )
...
* add tooltip
* add other direction to deadband
* add impl
* test partitioning
* makefile
* wrong comment
* fix include
2020-05-07 08:52:32 -04:00
aa3bf51723
short term fuel trim: part 1 ( #1402 )
...
* add cell
* add stft cell tests
* add bit
* minimally generate
* config defaults
2020-05-06 21:00:40 -04:00
74d13c391f
Rewrite boost control in new closed loop framework ( #1342 )
...
* rewrite boost
* test
* fix build
* tests
* open loop test
* test closed loop
* fix names
* typo
* tests
* mock boost setOutput
* needs more virtual
* fix boost logic
* switch to TPS based open loop
* fix test
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-05-06 08:40:42 -04:00
745b0c04ac
pull out std air charge math ( #1397 )
2020-05-05 08:01:40 -04:00
c39662b5c6
better state messages
2020-05-01 18:52:06 -04:00
ba6ec4ac51
TPS Auto Calibration with ETB ( #1382 )
...
* switch to thread
* actually use default frequency define
* crank ADC too
* make space in RAM
* remove TS field
* this should work for test
* auto cal
* wire up bench testing
* s
* fix
* rearrange a bit
* inject
* remove unused bit
* mock repair
* guard for ECUs without ETB
2020-04-28 19:31:41 -04:00
d728b1ca48
Minor ETB improvements ( #1381 )
...
* fix pid reset and pedal failure
* pause control later
* test pauseEtbControl
* update tooltip + field name
* update test
2020-04-28 16:52:40 -04:00
fe4b531aeb
Move ETB control to a thread ( #1374 )
...
* switch to thread
* actually use default frequency define
* crank ADC too
* make space in RAM
* remove TS field
* this should work for test
* fix dt
* re-resize ram
2020-04-28 07:22:31 -04:00
6bd5cd1112
fixing build
2020-04-26 20:40:06 -04:00
f128b33694
General purpose PWM: implementation & tests ( #1366 )
...
* config
* significant digits
* renumber enum, no need for a "none"
* ui
* impl base
* error handle MAP
* init & update
* don't need arg
* don't lie about sensor
* fix test build
* test stub
* initialize
* null check
* fix clamping
* test output
* types & enums
* don't need param
* test getOutput
* fix
* output pin instead of brain pin
* default config
2020-04-26 14:06:28 -04:00
a444e09ff8
etb CL test ( #1361 )
2020-04-24 17:54:03 -04:00
99489cff67
Improve ETB idle control ( #1319 )
...
* compress idle pos
* fix tests for new behavior
2020-04-20 17:29:03 -04:00
1a5e0a42f8
Inject idle to ETB ( #1335 )
...
* inject idle position
* pointer
* etb idle tests
* extract mocks
* ops
* test negative case too
* don't convert for etb
* guard
2020-04-20 16:26:35 -04:00
e04008610a
ETB: inject pedal map ( #1334 )
...
* add clampf
* more tests
* public
* missed a mock
* fix output duty clamping
* do it that way
* more
* ah ha!
* test negative too
* clamp pedal
* inject pedal map
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-04-20 14:34:45 -04:00
0619575716
ETB testing: output, position clamping ( #1333 )
...
* add clampf
* more tests
* public
* missed a mock
* fix output duty clamping
* do it that way
* more
* ah ha!
* test negative too
* clamp pedal
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-04-20 13:52:20 -04:00
8aac233a5f
rewrite etb tests with gmock ( #1330 )
2020-04-19 20:32:41 -04:00
75b009bbae
Closed loop controller base & ETB testing ( #1322 )
...
* closed loop controller base
* etb tps test
* closed loop controller tests
* test support
* update gtest
* fix for change
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-04-19 17:18:47 -04:00
71e7fb7e50
TT_RENIX_66_2_2_2
2020-04-19 14:54:02 -04:00
b287b2f339
TT_HONDA_K_12_1
2020-04-19 14:23:01 -04:00
0d699bcfe9
Improve unexpected ( #1323 )
...
* use type instead of value
* fix remaining initializer-list users
* impruv
* last consumer?
* consumer
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-04-19 08:37:43 -04:00
7f60384c75
add expected helper class ( #1321 )
...
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-04-19 01:53:04 -04:00
c5a0da2db7
consistency
2020-04-18 22:46:22 -04:00
be497685a0
Renix 44-2-2
2020-04-18 22:20:17 -04:00
4d24fdd57d
Fuel/ign correctino on new temp sensors ( #1318 )
...
* corrections
* test
* adv map
* tests
* cleanup
* lcd
* fsio
* unneeded
* more math
* last consumer
* cleanup
* fix kinetis
2020-04-18 18:45:30 -04:00
bc15e0826d
CLT consumer: fsio ( #1302 )
...
* idle
* CLT test prep
* idle target
* header
* air interpolate
* ancient comment
* fuel cut
* fuel cut, idle tests
* cleanup
* fsio test help
2020-04-15 16:20:45 -04:00
044766ec70
New clt consumers part 1 ( #1301 )
...
* idle
* CLT test prep
* idle target
* header
* air interpolate
* ancient comment
* fuel cut
* fuel cut, idle tests
* cleanup
2020-04-15 09:48:17 -04:00
Matthew Kennedy
rusefi