/* ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. */ /** * @file templates/halconf.h * @brief HAL configuration header. * @details HAL configuration file, this file allows to enable or disable the * various device drivers from your application. You may also use * this file in order to override the device drivers default settings. * * @addtogroup HAL_CONF * @{ */ #ifndef HALCONF_H #define HALCONF_H #define _CHIBIOS_HAL_CONF_ #define _CHIBIOS_HAL_CONF_VER_7_1_ #include "mcuconf.h" #include "rusefi_halconf.h" /** * @brief Enables the cryptographic subsystem. */ #if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) #define HAL_USE_CRY FALSE #endif /** * @brief Enables the DAC subsystem. */ #if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) #define HAL_USE_DAC FALSE #endif /** * @brief Enables the EFlash subsystem. */ #if !defined(HAL_USE_EFL) || defined(__DOXYGEN__) #define HAL_USE_EFL FALSE #endif /** * @brief Enables the I2C subsystem. */ #if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) #define HAL_USE_I2C FALSE #endif /** * @brief Enables the ICU subsystem. */ #if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) #define HAL_USE_ICU FALSE #endif /** * @brief Enables the PWM subsystem. */ #if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) #define HAL_USE_PWM TRUE #endif /** * @brief Enables the RTC subsystem. */ #if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) #define HAL_USE_RTC TRUE #endif /** * @brief Enables the SDC subsystem. */ #if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) #define HAL_USE_SDC FALSE #endif /** * @brief Enables the SERIAL subsystem. */ #if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) #define HAL_USE_SERIAL TRUE #endif /** * @brief Enables the SIO subsystem. */ #if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) #define HAL_USE_SIO FALSE #endif /** * @brief Enables the SPI subsystem. */ #if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) #define HAL_USE_SPI TRUE #endif /** * @brief Enables the TRNG subsystem. */ #if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) #define HAL_USE_TRNG FALSE #endif /** * @brief Enables the UART subsystem. */ #if !defined(HAL_USE_UART) || defined(__DOXYGEN__) #define HAL_USE_UART FALSE #endif /** * @brief Enables the WDG subsystem. */ #if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) #define HAL_USE_WDG FALSE #endif /** * @brief Enables the WSPI subsystem. */ #if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) #define HAL_USE_WSPI FALSE #endif /*===========================================================================*/ /* PAL driver related settings. */ /*===========================================================================*/ /** * @brief Enables synchronous APIs. * @note Disabling this option saves both code and data space. */ #if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) #define PAL_USE_WAIT FALSE #endif /*===========================================================================*/ /* CAN driver related settings. */ /*===========================================================================*/ /** * @brief Enforces the driver to use direct callbacks rather than OSAL events. */ #if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) #define CAN_ENFORCE_USE_CALLBACKS FALSE #endif /*===========================================================================*/ /* CRY driver related settings. */ /*===========================================================================*/ /** * @brief Enables the SW fall-back of the cryptographic driver. * @details When enabled, this option, activates a fall-back software * implementation for algorithms not supported by the underlying * hardware. * @note Fall-back implementations may not be present for all algorithms. */ #if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) #define HAL_CRY_USE_FALLBACK FALSE #endif /** * @brief Makes the driver forcibly use the fall-back implementations. */ #if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) #define HAL_CRY_ENFORCE_FALLBACK FALSE #endif /*===========================================================================*/ /* SDC driver related settings. */ /*===========================================================================*/ /** * @brief Number of initialization attempts before rejecting the card. * @note Attempts are performed at 10mS intervals. */ #if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) #define SDC_INIT_RETRY 100 #endif /** * @brief Include support for MMC cards. * @note MMC support is not yet implemented so this option must be kept * at @p FALSE. */ #if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) #define SDC_MMC_SUPPORT FALSE #endif /** * @brief Delays insertions. * @details If enabled this options inserts delays into the MMC waiting * routines releasing some extra CPU time for the threads with * lower priority, this may slow down the driver a bit however. */ #if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) #define SDC_NICE_WAITING TRUE #endif /** * @brief OCR initialization constant for V20 cards. */ #if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) #define SDC_INIT_OCR_V20 0x50FF8000U #endif /** * @brief OCR initialization constant for non-V20 cards. */ #if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) #define SDC_INIT_OCR 0x80100000U #endif /*===========================================================================*/ /* SERIAL driver related settings. */ /*===========================================================================*/ /** * @brief Default bit rate. * @details Configuration parameter, this is the baud rate selected for the * default configuration. */ #if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) #define SERIAL_DEFAULT_BITRATE 38400 #endif /** * @brief Serial buffers size. * @details Configuration parameter, you can change the depth of the queue * buffers depending on the requirements of your application. * @note The default is 16 bytes for both the transmission and receive * buffers. */ #if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) #define SERIAL_BUFFERS_SIZE 16 #endif /*===========================================================================*/ /* SPI driver related settings. */ /*===========================================================================*/ /** * @brief Enables circular transfers APIs. * @note Disabling this option saves both code and data space. */ #if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) #define SPI_USE_CIRCULAR FALSE #endif /** * @brief Handling method for SPI CS line. * @note Disabling this option saves both code and data space. */ #if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) #define SPI_SELECT_MODE SPI_SELECT_MODE_PAD #endif /*===========================================================================*/ /* UART driver related settings. */ /*===========================================================================*/ /** * @brief Enables synchronous APIs. * @note Disabling this option saves both code and data space. */ #if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) #define UART_USE_WAIT FALSE #endif /** * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. * @note Disabling this option saves both code and data space. */ #if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) #define UART_USE_MUTUAL_EXCLUSION FALSE #endif /* common for all STM32 */ #include "../../cfg/halconf_community.h" #endif /* HALCONF_H */ /** @} */