/**
 * @file	mazda_626.cpp
 * MAZDA_626
 * set_engine_type 28
 *
 * @date Jan 16, 2015
 * @author Andrey Belomutskiy, (c) 2012-2015
 */

#include "main.h"
#include "mazda_626.h"
#include "engine_math.h"
#include "honda_accord.h"
#include "custom_engine.h"
#include "allsensors.h"
#include "fsio_impl.h"
#include "settings.h"

EXTERN_ENGINE;

void setMazda626EngineConfiguration(DECLARE_ENGINE_PARAMETER_F) {
	setCustomEngineConfiguration(PASS_ENGINE_PARAMETER_F);

	engineConfiguration->trigger.type = TT_MAZDA_DOHC_1_4;

	engineConfiguration->engineChartSize = 150;

	boardConfiguration->sensorChartMode = SC_TRIGGER;
	engineConfiguration->sensorChartFrequency = 2;

	engineConfiguration->injector.flow = 330;
	engineConfiguration->specs.displacement = 2.0;

	// set_global_trigger_offset_angle -42
	engineConfiguration->globalTriggerAngleOffset = -42;

	// set_cranking_timing_angle 15
	engineConfiguration->crankingTimingAngle = 8;
	engineConfiguration->crankingChargeAngle = 70;

	// set_cranking_fuel 9
	engineConfiguration->cranking.baseFuel = 9;

	engineConfiguration->rpmHardLimit = 6000;

	engineConfiguration->tpsMin = 80;
	engineConfiguration->tpsMax = 764;

	setAlgorithm(LM_SPEED_DENSITY PASS_ENGINE_PARAMETER);
	setFuelLoadBin(0, 100 PASS_ENGINE_PARAMETER);

	// set_whole_fuel_map 9
	setWholeFuelMap(9 PASS_ENGINE_PARAMETER);

// set_whole_timing_map 10
	setWholeTimingTable(10 PASS_ENGINE_PARAMETER);

	// http://i.imgur.com/fclVzvu.jpg
	setCommonNTCSensor(&engineConfiguration->clt);
	// http://i.imgur.com/2hI67yW.jpg
	setThermistorConfiguration(&engineConfiguration->iat, 13, 56000, 50, 9000, 80.0, 2700);
	engineConfiguration->iat.config.bias_resistor = 18200;

	commonFrankensoAnalogInputs(engineConfiguration);
//	engineConfiguration->map.sensor.hwChannel = EFI_ADC_4;
	engineConfiguration->mafAdcChannel = EFI_ADC_NONE;

	// todo: 8.2 or 10k?
	engineConfiguration->vbattDividerCoeff = ((float) (10 + 33)) / 10 * 2;

	engineConfiguration->map.sensor.type = MT_SUBY_DENSO;


// todo	engineConfiguration->afr.hwChannel = EFI_ADC_3;
	setEgoSensor(ES_Innovate_MTX_L PASS_ENGINE_PARAMETER);


#if EFI_FSIO || defined(__DOXYGEN__)
	// backup main relay pin
	setFsio(0, GPIOE_6, "1" PASS_ENGINE_PARAMETER);
#endif

	engineConfiguration->externalKnockSenseAdc = EFI_ADC_4;


}