rusefi-1/misc/stm32f1_test_project
rusefillc b8a9213ca0 fancy 2022-01-26 19:31:15 -05:00
..
timer 1MHz software timer into F103 project #3840 2022-01-25 22:41:02 -05:00
.cproject
.project
Makefile fancy 2022-01-26 19:31:15 -05:00
can.cpp https://github.com/mck1117/wideband/issues/44 2022-01-23 21:15:45 -05:00
can.h F1 test project 2022-01-23 15:20:51 -05:00
chconf.h
clean_build.bat
compile.bat that's supposed to work - but it does not :( 2022-01-23 16:12:19 -05:00
flash.bat
halconf.h F1 test project: now with C++ and UART 2022-01-22 23:30:18 -05:00
main.cpp F1 test project 2022-01-23 15:20:51 -05:00
mcuconf.h F1 test project: now with C++ and UART 2022-01-22 23:30:18 -05:00
readme.txt
spi.cpp F1 test project 2022-01-23 15:20:51 -05:00
spi.h F1 test project 2022-01-23 15:20:51 -05:00
uart.cpp F1 test project 2022-01-23 15:20:51 -05:00
uart.h F1 test project: now with C++ and UART 2022-01-22 23:30:18 -05:00

readme.txt

*****************************************************************************
** ChibiOS/RT port for ARM-Cortex-M3 STM32F103.                            **
*****************************************************************************

** TARGET **

The demo runs on an ST_NUCLEO_F103RB board.

** The Demo **

The demo flashes the board LED using a thread, by pressing the button located
on the board the test procedure is activated with output on the serial port
SD2 (USART2, mapped on USB virtual COM port).

** Build Procedure **

The demo has been tested by using the free Codesourcery GCC-based toolchain
and YAGARTO.
Just modify the TRGT line in the makefile in order to use different GCC ports.

** Notes **

Some files used by the demo are not part of ChibiOS/RT but are copyright of
ST Microelectronics and are licensed under a different license.
Also note that not all the files present in the ST library are distributed
with ChibiOS/RT, you can find the whole library on the ST web site:

                             http://www.st.com