rusefi
/
rusefi-1
mirror of https://github.com/rusefi/rusefi-1.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
rusefi-1/firmware/console/binary/output_channels.txt

342 lines
16 KiB
Plaintext
Raw Blame History

! units,scale,offset,min,max,digits
struct_no_prefix output_channels_s
bit sd_present
bit isIgnitionEnabledIndicator;
bit isInjectionEnabledIndicator;
bit sd_logging_internal
bit unusedb4;
bit isFuelPumpOn;
bit isFanOn;radiator fan
bit isO2HeaterOn;
bit checkEngine;
bit needBurn;
bit sd_msd
bit isFan2On
bit alternatorOnOff;
bit toothLogReady;
bit unused3123
bit isTpsError;
bit isCltError;
bit isMapError;
bit isIatError;
bit unused131313;
bit isTriggerError;
bit hasCriticalError;
bit isWarnNow;
bit isPedalError;
bit isKnockChipOk;
bit launchTriggered;
bit isTps2Error;
bit isIdleClosedLoop;
bit isIdleCoasting;
uint16_t autoscale RPMValue;@@GAUGE_NAME_RPM@@;"RPM",1, 0, 0, 8000, 0
uint16_t rpmAcceleration;dRPM;"RPM/s",1, 0, 0, 5, 0
uint16_t autoscale speedToRpmRatio;@@GAUGE_NAME_GEAR_RATIO@@;"value",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0
uint8_t autoscale vehicleSpeedKph;@@GAUGE_NAME_VVS@@;"kph",1, 0, 0, 0, 0
int8_t autoscale internalMcuTemperature;@@GAUGE_NAME_CPU_TEMP@@;"deg C",1, 0, 0, 0, 0
int16_t autoscale coolant;@@GAUGE_NAME_CLT@@;"deg C",{1/@@PACK_MULT_TEMPERATURE@@}, 0, 0, 0, 0
int16_t autoscale intake;@@GAUGE_NAME_IAT@@;"deg C",{1/@@PACK_MULT_TEMPERATURE@@}, 0, 0, 0, 0
int16_t autoscale auxTemp1;;"deg C",{1/@@PACK_MULT_TEMPERATURE@@}, 0, 0, 0, 0
int16_t autoscale auxTemp2;;"deg C",{1/@@PACK_MULT_TEMPERATURE@@}, 0, 0, 0, 0
int16_t autoscale TPSValue;@@GAUGE_NAME_TPS@@;"%",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0
int16_t autoscale throttlePedalPosition;@@GAUGE_NAME_THROTTLE_PEDAL@@;"%",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0
uint16_t tpsADC;;"ADC", 1, 0, 0, 0, 0
uint16_t autoscale rawMaf;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 5, 3
uint16_t autoscale mafMeasured;@@GAUGE_NAME_AIR_FLOW_MEASURED@@;"kg/h",{1/@@PACK_MULT_MASS_FLOW@@}, 0, 0, 0, 0
uint16_t autoscale MAPValue;@@GAUGE_NAME_MAP@@;"kPa",{1/@@PACK_MULT_PRESSURE@@}, 0, 0, 0, 0
uint16_t autoscale baroPressure;;"kPa",{1/@@PACK_MULT_PRESSURE@@}, 0, 0, 0, 0
uint16_t autoscale lambdaValue;@@GAUGE_NAME_LAMBDA@@;"",{1/@@PACK_MULT_LAMBDA@@}, 0, 0, 0, 0
uint8_t autoscale knockRetard;@@GAUGE_NAME_KNOCK_RETARD@@;"deg",{1/10}, 0, 0, 0, 0
uint8_t autoscale idleCurrentPosition;;"%", 0.5, 0, 0, 100, 1
uint16_t autoscale VBatt;@@GAUGE_NAME_VBAT@@;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 0, 0
uint16_t autoscale oilPressure;@@GAUGE_NAME_OIL_PRESSURE@@;"kPa",{1/@@PACK_MULT_PRESSURE@@}, 0, 0, 0, 0
int16_t autoscale vvtPositionB1I;@@GAUGE_NAME_VVT_B1I@@;"deg",{1/@@PACK_MULT_ANGLE@@}, 0, 0, 0, 0
uint16_t autoscale chargeAirMass;@@GAUGE_NAME_AIR_MASS@@;"g",{1/1000}, 0, 0, 0, 0
uint16_t autoscale crankingFuelMs;crankingFuelMs\nairmass in mg, 0-65 grams;"ms",{1/@@PACK_MULT_FUEL_MASS@@}, 0, 0, 0, 0
uint16_t autoscale currentTargetAfr;@@GAUGE_NAME_TARGET_AFR@@;"ratio",{1/@@PACK_MULT_AFR@@}, 0, 0, 0, 0
uint16_t autoscale baseFuel;@@GAUGE_NAME_FUEL_BASE@@\nThis is the raw value we take from the fuel map or base fuel algorithm, before the corrections;"mg",{1/@@PACK_MULT_FUEL_MASS@@}, 0, 0, 0, 0
uint16_t autoscale fuelRunning;@@GAUGE_NAME_FUEL_RUNNING@@\nTotal fuel with CLT IAT and TPS acceleration without injector lag corrections per cycle, as pulse per cycle;"mg",{1/@@PACK_MULT_FUEL_MASS@@}, 0, 0, 0, 0
uint16_t autoscale actualLastInjection;@@GAUGE_NAME_FUEL_LAST_INJECTION@@\nActual last injection time - including all compensation and injection mode;"ms",{1/@@PACK_MULT_MS@@}, 0, 0, 0, 0
uint8_t autoscale injectorDutyCycle;@@GAUGE_NAME_FUEL_INJ_DUTY@@;"%",{1/2}, 0, 0, 0, 0
uint8_t autoscale veValue;@@GAUGE_NAME_FUEL_VE@@;"ratio",{1/2}, 0, 0, 0, 0
int16_t autoscale injectionOffset;;"deg", 1, 0, 0, 0, 0
int16_t autoscale tCharge;;"deg C",{1/@@PACK_MULT_TEMPERATURE@@}, 0, 0, 0, 0
! Corrections
uint16_t autoscale injectorLagMs;@@GAUGE_NAME_INJECTOR_LAG@@;"ms",{1/@@PACK_MULT_MS@@}, 0, 0, 0, 0
uint16_t autoscale iatCorrection;@@GAUGE_NAME_FUEL_IAT_CORR@@;"%",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0
uint16_t autoscale cltCorrection;@@GAUGE_NAME_FUEL_CLT_CORR@@;"%",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0
uint16_t autoscale baroCorrection;@@GAUGE_NAME_FUEL_BARO_CORR@@;"%",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0
uint16_t autoscale currentEnginePhase;Engine Phase;"deg",1, 0, 0, 0, 0
! Wall model AE
uint16_t autoscale wallFuelAmount;@@GAUGE_NAME_FUEL_WALL_AMOUNT@@;"mg",{1/@@PACK_MULT_FUEL_MASS@@}, 0, 0, 0, 0
int16_t autoscale wallFuelCorrection;@@GAUGE_NAME_FUEL_WALL_CORRECTION@@;"mg",{1/@@PACK_MULT_FUEL_MASS@@}, 0, 0, 0, 0
uint16_t revolutionCounterSinceStart;;"",1, 0, 0, 0, 0
int16_t autoscale deltaTps;@@GAUGE_NAME_FUEL_TPS_ROC@@;"ratio",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0
uint16_t canReadCounter;;"",1, 0, 0, 0, 0
int16_t autoscale tpsAccelFuel;@@GAUGE_NAME_FUEL_TPS_EXTRA@@;"ms",{1/@@PACK_MULT_MS@@}, 0, 0, 0, 0
! Ignition
int16_t autoscale ignitionAdvance;@@GAUGE_NAME_TIMING_ADVANCE@@;"deg",{1/@@PACK_MULT_ANGLE@@}, 0, 0, 0, 0
uint16_t autoscale sparkDwellValue;@@GAUGE_COIL_DWELL_TIME@@;"ms",{1/@@PACK_MULT_MS@@}, 0, 0, 0, 0
uint16_t autoscale coilDutyCycle;@@GAUGE_NAME_DWELL_DUTY@@;"%",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0
! Idle & ETB
uint16_t autoscale idleAirValvePosition;@@GAUGE_NAME_IAC@@;"%",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0
int16_t autoscale etbTarget;ETB Target;"%",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0
int16_t autoscale etb1DutyCycle;@@GAUGE_NAME_ETB_DUTY@@;"%",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0
int16_t autoscale etb1Error;ETB Error;"%",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0
! Fuel system
int16_t autoscale fuelTankLevel;Fuel level;"%",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0
uint16_t autoscale totalFuelConsumption;@@GAUGE_NAME_FUEL_CONSUMPTION@@;"grams",1, 0, 0, 0, 0
uint16_t autoscale fuelFlowRate;@@GAUGE_NAME_FUEL_FLOW@@;"gram/s",{1/@@PACK_MULT_FUEL_FLOW@@}, 0, 0, 0, 0
! Y axis values for selectable tables
uint16_t autoscale veTableYAxis;;"%",{1/100}, 0, 0, 0, 0
uint16_t autoscale afrTableYAxis;;"%",{1/100}, 0, 0, 0, 0
float autoscale knockLevel;@@GAUGE_NAME_KNOCK_LEVEL@@;"Volts", 1, 0, 0, 0, 0
! integration magic: TS requires exact 'seconds' name
uint32_t autoscale seconds;@@GAUGE_NAME_UPTIME@@;"sec", 1, 0, 0, 0, 0
uint32_t autoscale engineMode;Engine Mode;"em", 1, 0, 0, 0, 0
uint32_t autoscale firmwareVersion;@@GAUGE_NAME_VERSION@@;"version_f", 1, 0, 0, 0, 0
! todo: this not needed in light of TS_SIGNATURE but rusEFI console still uses it. Need to migrate
! rusEFI console from TS_FILE_VERSION to TS_SIGNATURE :(
uint32_t autoscale tsConfigVersion;;"", 1, 0, 0, 0, 0
! These two fields indicate to TS that we'd like to set a particular field to a particular value
! We use a maintainConstantValue in TS for each field we'd like to set, like this:
! maintainConstantValue = tpsMax, { (calibrationMode == 1 ) ? calibrationValue : tpsMax }
! maintainConstantValue = tpsMin, { (calibrationMode == 2 ) ? calibrationValue : tpsMin }
! When the mode is set to a particular value, TS will copy the calibrationValue in to the specified field.
!
! With this simple construct, the ECU can send any number of internally computed configuration fields
! back to TunerStudio, getting around the problem of setting values on the controller without TS's knowledge.
! The ECU simply has to sequentially set a mode/value, wait briefly, then repeat until all the values
! it wants to send have been sent.
float autoscale calibrationValue;;"", 1, 0, 0, 0, 0
uint8_t autoscale calibrationMode;;"", 1, 0, 0, 0, 0
uint8_t autoscale idleTargetPosition;;"", 1, 0, 0, 0, 0
! Values used for load axes for fuel/ign tables
! These may or may not be the same value, depending on mode
uint16_t autoscale fuelingLoad;@@GAUGE_NAME_FUEL_LOAD@@;"%",{1/100}, 0, 0, 0, 0
uint16_t autoscale ignitionLoad;@@GAUGE_NAME_IGNITION_LOAD@@;"%",{1/100}, 0, 0, 0, 0
! we want a hash of engineMake+engineCode+vehicleName in the log file in order to match TS logs to rusEFI Online tune
uint16_t autoscale engineMakeCodeNameCrc16;@@GAUGE_NAME_ENGINE_CRC16@@;"crc16",1, 0, 0, 0, 0
! Errors
uint32_t autoscale totalTriggerErrorCounter;@@GAUGE_NAME_TRG_ERR@@;"counter",1, 0, 0, 0, 0
uint32_t orderingErrorCounter;;"",1, 0, 0, 0, 0
uint16_t autoscale warningCounter;@@GAUGE_NAME_WARNING_COUNTER@@;"count",1, 0, 0, 0, 0
uint16_t autoscale lastErrorCode;@@GAUGE_NAME_WARNING_LAST@@;"error",1, 0, 0, 0, 0
! todo: re-implement enableLogErrorList
uint16_t[8 iterate] recentErrorCode;;"error", 1, 0, 0, 0, 0
! todo: re-implement enableLogDebugChannels
float autoscale debugFloatField1;;"val", 1, 0, 0, 0, 0
float autoscale debugFloatField2;;"val", 1, 0, 0, 0, 0
float autoscale debugFloatField3;;"val", 1, 0, 0, 0, 0
float autoscale debugFloatField4;;"val", 1, 0, 0, 0, 0
float autoscale debugFloatField5;;"val", 1, 0, 0, 0, 0
float autoscale debugFloatField6;;"val", 1, 0, 0, 0, 0
float autoscale debugFloatField7;;"val", 1, 0, 0, 0, 0
uint32_t autoscale debugIntField1;;"val", 1, 0, 0, 0, 0
uint32_t autoscale debugIntField2;;"val", 1, 0, 0, 0, 0
uint32_t autoscale debugIntField3;;"val", 1, 0, 0, 0, 0
int16_t autoscale debugIntField4;;"val", 1, 0, 0, 0, 0
int16_t autoscale debugIntField5;;"val", 1, 0, 0, 0, 0
! todo: reimplement { LIS302DLCsPin != 0 || imuType != 0 }
int16_t autoscale accelerationX;@@GAUGE_NAME_ACCEL_X@@;"G",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0
int16_t autoscale accelerationY;@@GAUGE_NAME_ACCEL_Y@@;"G",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0
! todo: { max31855_cs1 != 0}
uint16_t[EGT_CHANNEL_COUNT iterate] egt;;"deg C", 1, 0, 0, 0, 0
int16_t autoscale TPS2Value;@@GAUGE_NAME_TPS2@@;"%",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0
int16_t autoscale rawTps1Primary;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 5, 3
int16_t autoscale rawPpsPrimary;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 5, 3
int16_t autoscale rawClt;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 5, 3
int16_t autoscale rawIat;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 5, 3
int16_t autoscale rawOilPressure;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 5, 3
uint16_t autoscale tuneCrc16;@@GAUGE_NAME_TUNE_CRC16@@;"crc16", 1, 0, 0, 0, 0
uint8_t autoscale fuelClosedLoopBinIdx;;"", 1, 0, 0, 0, 0
int8_t autoscale tcuCurrentGear;@@GAUGE_NAME_CURRENT_GEAR@@;"gear", 1, 0, -1, 10, 0
int16_t autoscale rawPpsSecondary;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 5, 3
int8_t[12 iterate] autoscale knock;;"dBv",1, 0, 0, 0, 0
int8_t autoscale tcuDesiredGear;@@GAUGE_NAME_DESIRED_GEAR@@;"gear",1, 0, -1, 10, 0
uint8_t autoscale flexPercent;@@GAUGE_NAME_FLEX@@;"%",{1/2}, 0, 0, 0, 0
int16_t autoscale rawIdlePositionSensor;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 5, 3
int16_t autoscale rawWastegatePosition;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 5, 3
int16_t autoscale wastegatePositionSensor;@@GAUGE_NAME_WG_POSITION@@;"%",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0
int16_t autoscale idlePositionSensor;@@GAUGE_NAME_IDLE_POSITION@@;"%",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0
int16_t autoscale rawLowFuelPressure;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 5, 3
int16_t autoscale rawHighFuelPressure;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 5, 3
int16_t autoscale lowFuelPressure;@@GAUGE_NAME_FUEL_PRESSURE_LOW@@;"kpa",{1/@@PACK_MULT_PRESSURE@@}, 0, 0, 0, 0
int16_t autoscale highFuelPressure;@@GAUGE_NAME_FUEL_PRESSURE_HIGH@@;"bar",{1/@@PACK_MULT_HIGH_PRESSURE@@}, 0, 0, 0, 0
uint16_t autoscale targetLambda;@@GAUGE_NAME_TARGET_LAMBDA@@;"",{1/@@PACK_MULT_LAMBDA@@}, 0, 0, 0, 0
uint16_t autoscale AFRValue;@@GAUGE_NAME_AFR@@;"AFR",{1/@@PACK_MULT_AFR@@}, 0, 0, 0, 0
uint16_t autoscale VssAcceleration;Vss Accel;"m/s2",{1/@@PACK_MULT_MS@@}, 0, 0, 0, 0
uint16_t autoscale lambdaValue2;@@GAUGE_NAME_LAMBDA2@@;"",{1/@@PACK_MULT_LAMBDA@@}, 0, 0, 0, 0
uint16_t autoscale AFRValue2;@@GAUGE_NAME_AFR2@@;"AFR",{1/@@PACK_MULT_AFR@@}, 0, 0, 0, 0
int16_t autoscale vvtPositionB1E;@@GAUGE_NAME_VVT_B1E@@;"deg",{1/@@PACK_MULT_ANGLE@@}, 0, 0, 0, 0
int16_t autoscale vvtPositionB2I;@@GAUGE_NAME_VVT_B2I@@;"deg",{1/@@PACK_MULT_ANGLE@@}, 0, 0, 0, 0
int16_t autoscale vvtPositionB2E;@@GAUGE_NAME_VVT_B2E@@;"deg",{1/@@PACK_MULT_ANGLE@@}, 0, 0, 0, 0
int16_t[2 iterate] autoscale fuelPidCorrection;;"%",{1/@@PACK_MULT_PERCENT@@}, 0, -20, 20, 2
int16_t autoscale rawTps1Secondary;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 5, 3
int16_t autoscale rawTps2Primary;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 5, 3
int16_t autoscale rawTps2Secondary;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 5, 3
uint16_t autoscale knockCount;@@GAUGE_NAME_KNOCK_COUNTER@@;"",1, 0, 0, 0, 0
int16_t autoscale accelerationZ;@@GAUGE_NAME_ACCEL_Z@@;"G",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0
int16_t autoscale accelerationRoll;@@GAUGE_NAME_ACCEL_ROLL@@;"G",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0
int16_t autoscale accelerationYaw;@@GAUGE_NAME_ACCEL_YAW@@;"G",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0
int8_t[4 iterate] autoscale vvtTargets;;"deg",1, 0, 0, 0, 0
uint16_t turboSpeed;@@GAUGE_NAME_TURBO_SPEED@@;"hz",1, 0, 0, 0, 0
! fun fact: we have a separate pid_state.txt file for a bit of a different structure huh?
struct pid_status_s
float autoscale pTerm;;"", 1, 0, -50000, 50000, 2
int16_t autoscale iTerm;;"", 0.01, 0, -327, 327, 2
int16_t autoscale dTerm;;"", 0.01, 0, -327, 327, 2
int16_t autoscale output;;"", 0.01, 0, -327, 327, 2
int16_t autoscale error;;"", 0.01, 0, -327, 327, 2
uint32_t resetCounter;;"", 1, 0, 0, 10000, 0
end_struct
int16_t autoscale tps1Split;;"%",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0
int16_t autoscale tps2Split;;"%",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0
int16_t autoscale tps12Split;;"%",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0
int16_t autoscale accPedalSplit;;"%",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0
int8_t autoscale sparkCutReason;Spark Cut Code;"code",1, 0, 0, 0, 0
int8_t autoscale fuelCutReason;Fuel Cut Code;"code",1, 0, 0, 0, 0
uint16_t autoscale mafEstimate;@@GAUGE_NAME_AIR_FLOW_ESTIMATE@@;"kg/h",{1/@@PACK_MULT_MASS_FLOW@@}, 0, 0, 0, 0
uint16_t instantRpm;;"rpm", 1, 0, 0, 0, 0
uint16_t systemEventReuse;;"counter", 1, 0, 0, 0, 0
uint16_t autoscale rawMap;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 5, 3
uint16_t autoscale rawAfr;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 5, 3
uint8_t tpsAccelFrom;;"%", 1, 0, 0, 100, 0
uint8_t tpsAccelTo;;"%", 1, 0, 0, 100, 0
float autoscale calibrationValue2;;"", 1, 0, 0, 0, 0
bit isMainRelayOn;
bit isUsbConnected;Original reason for this is to check if USB is connected from Lua
int luaInvocationCounter;;"count",1, 0, 0, 0, 0
int luaLastCycleDuration;;"nt",1, 0, 0, 0, 0
uint8_t testBenchIter;;"count",1, 0, 0, 0, 0
uint8_t tcu_currentRange;"Current Range";"", 1, 0, 0, 0, 0
uint16_t autoscale tcRatio;@@GAUGE_NAME_TC_RATIO@@;"value",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0
float lastShiftTime;"S"
int vssEdgeCounter
int issEdgeCounter
int16_t autoscale auxLinear1;@@GAUGE_NAME_AUX_LINEAR_1@@;"", 0.01, 0, 0, 0, 0
int16_t autoscale auxLinear2;@@GAUGE_NAME_AUX_LINEAR_2@@;"", 0.01, 0, 0, 0, 0
bit dfcoActive
bit tpsAccelActive
uint8_t autoscale boostControllerOutput;@@GAUGE_NAME_BOOST_OUTPUT@@;"%", 0.5, 0, 0, 100, 1
uint8_t autoscale boostControllerOpenLoopPart;@@GAUGE_NAME_BOOST_OPEN_LOOP@@;"%", 0.5, 0, 0, 100, 1
uint16_t autoscale fallbackMap;;"kPa", 0.1, 0, 0, 1000, 1
uint8_t detectedGear;@@GAUGE_NAME_DETECTED_GEAR@@;"", 1, 0, 0, @@GEARS_COUNT@@, 0
uint16_t autoscale instantMAPValue;Instant MAP;"kPa",{1/@@PACK_MULT_PRESSURE@@}, 0, 0, 655, 2
uint16_t mostRecentTimeBetweenSparkEvents;;"", 1, 0, -10000, 10000, 3
uint16_t mostRecentTimeBetweenIgnitionEvents;;"", 1, 0, -10000, 10000, 3
uint16_t maxLockedDuration;;"", 1, 0, -10000, 10000, 3
uint16_t maxTriggerReentrant;;"", 1, 0, -10000, 10000, 3
uint16_t canWriteOk;;"", 1, 0, -10000, 10000, 3
uint16_t canWriteNotOk;;"", 1, 0, -10000, 10000, 3
int triggerPrimaryFall;;"", 1, 0, -10000, 10000, 3
int triggerPrimaryRise;;"", 1, 0, -10000, 10000, 3
int triggerSecondaryFall;;"", 1, 0, -10000, 10000, 3
int triggerSecondaryRise;;"", 1, 0, -10000, 10000, 3
int triggerVvtFall;;"", 1, 0, -10000, 10000, 3
int triggerVvtRise;;"", 1, 0, -10000, 10000, 3
uint8_t startStopStateToggleCounter;;"", 1, 0, -10000, 10000, 3
uint8_t starterState;;"", 1, 0, -10000, 10000, 3
uint8_t starterRelayDisable;;"", 1, 0, -10000, 10000, 3
uint8_t multiSparkCounter;;"", 1, 0, -10000, 10000, 3
float injectorFlowPressureRatio;;"", 1, 0, -10000, 10000, 3
float injectorFlowPressureDelta;;"kPa", 1, 0, -10000, 10000, 1
pid_status_s alternatorStatus
pid_status_s idleStatus
pid_status_s etbStatus
pid_status_s boostStatus
uint16_t auxSpeed1;aux speed 1;"s",1, 0, 0, 0, 0
uint16_t auxSpeed2;aux speed 2;"s",1, 0, 0, 0, 0
uint16_t autoscale ISSValue;@@GAUGE_NAME_ISS@@;"RPM",1, 0, 0, 8000, 0
int16_t[AUX_ANALOG_INPUT_COUNT iterate] autoscale rawAnalogInput;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 5, 3
uint8_t[62 iterate] unusedAtTheEnd;;"",1, 0, 0, 0, 0
end_struct
Reference in New Issue View Git Blame Copy Permalink