rusefi-1/firmware/controllers/actuators/idle_state_generated.h

158 lines
3.7 KiB
C

// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/actuators/idle_state.txt Fri Jul 08 05:13:11 UTC 2022
// by class com.rusefi.output.CHeaderConsumer
// begin
#pragma once
#include "rusefi_types.h"
// start of idle_state_s
struct idle_state_s {
/**
* offset 0
*/
idle_state_e idleState = (idle_state_e)0;
/**
* "idle: current position
* that's current position with CLT and IAT corrections"
* offset 4
*/
percent_t currentIdlePosition = (percent_t)0;
/**
* "idle: base value
* current position without adjustments (iacByTpsTaper, afterCrankingIACtaperDuration)"
* offset 8
*/
percent_t baseIdlePosition = (percent_t)0;
/**
* idle: iacByTpsTaper portion of idle
* offset 12
*/
percent_t iacByTpsTaper = (percent_t)0;
/**
* true in IDLE throttle pedal state, false if driver is touching the pedal
* todo: better name for this field?
* offset 16
*/
int throttlePedalUpState = (int)0;
/**
* The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.
* The throttle pedal can be pressed for a long time, making the PID data obsolete (thus the reset is required).
* We set 'mightResetPid' to true only if PID was actually used (i.e. idlePid.getOutput() was called) to save some CPU resources.
* See automaticIdleController().
offset 20 bit 0 */
bool mightResetPid : 1 {};
/**
* idle: shouldResetPid
offset 20 bit 1 */
bool shouldResetPid : 1 {};
/**
* idle: wasResetPid
* This is needed to slowly turn on the PID back after it was reset.
offset 20 bit 2 */
bool wasResetPid : 1 {};
/**
* idle: mustResetPid
* This is used when the PID configuration is changed, to guarantee the reset
offset 20 bit 3 */
bool mustResetPid : 1 {};
/**
* idle: coasting
offset 20 bit 4 */
bool isCoasting : 1 {};
/**
offset 20 bit 5 */
bool useIacTableForCoasting : 1 {};
/**
offset 20 bit 6 */
bool notIdling : 1 {};
/**
* idle: reset
offset 20 bit 7 */
bool needReset : 1 {};
/**
* idle: dead zone
offset 20 bit 8 */
bool isInDeadZone : 1 {};
/**
offset 20 bit 9 */
bool isBlipping : 1 {};
/**
offset 20 bit 10 */
bool useClosedLoop : 1 {};
/**
offset 20 bit 11 */
bool badTps : 1 {};
/**
offset 20 bit 12 */
bool looksLikeRunning : 1 {};
/**
offset 20 bit 13 */
bool looksLikeCoasting : 1 {};
/**
offset 20 bit 14 */
bool looksLikeCrankToIdle : 1 {};
/**
offset 20 bit 15 */
bool useInstantRpmForIdle : 1 {};
/**
offset 20 bit 16 */
bool isVerboseIAC : 1 {};
/**
offset 20 bit 17 */
bool unusedBit_22_17 : 1 {};
/**
offset 20 bit 18 */
bool unusedBit_22_18 : 1 {};
/**
offset 20 bit 19 */
bool unusedBit_22_19 : 1 {};
/**
offset 20 bit 20 */
bool unusedBit_22_20 : 1 {};
/**
offset 20 bit 21 */
bool unusedBit_22_21 : 1 {};
/**
offset 20 bit 22 */
bool unusedBit_22_22 : 1 {};
/**
offset 20 bit 23 */
bool unusedBit_22_23 : 1 {};
/**
offset 20 bit 24 */
bool unusedBit_22_24 : 1 {};
/**
offset 20 bit 25 */
bool unusedBit_22_25 : 1 {};
/**
offset 20 bit 26 */
bool unusedBit_22_26 : 1 {};
/**
offset 20 bit 27 */
bool unusedBit_22_27 : 1 {};
/**
offset 20 bit 28 */
bool unusedBit_22_28 : 1 {};
/**
offset 20 bit 29 */
bool unusedBit_22_29 : 1 {};
/**
offset 20 bit 30 */
bool unusedBit_22_30 : 1 {};
/**
offset 20 bit 31 */
bool unusedBit_22_31 : 1 {};
/**
* idle: target by CLT
* offset 24
*/
int targetRpmByClt = (int)0;
/**
* idle: A/C bump
* offset 28
*/
int targetRpmAcBump = (int)0;
};
static_assert(sizeof(idle_state_s) == 32);
// end
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/actuators/idle_state.txt Fri Jul 08 05:13:11 UTC 2022