readme.md
Connectors
Some vehicle-specific connector boards are also pretty nice if you want to keep original harness intact
See Connectors wiki page todo: move Connectors wiki page content into git
- 35 pin Mazda TCU
- 38 pin Chrysler NGC connector
- 48 pin Mazda Miata NA6
- 52 pin Mitsubishi Galant VR4
- 55 pin TE Lada
- 55 pin Motronic 1.5.x BMW/GM
- 60 pin Ford EEC-IV
- 64 pin Mazda Miata NA NB1, Honda Civic
- 68 pin Volkswagen Audi VAG
- 72 pin Mazda Miata NB2
- 88 pin Volkswagen Audi VAG
- 121 pin Volkswagen Audi VAG
- 134 pin BWM
- 154 pin Volkswagen Audi VAG
Modules
- stm32 Brain board 48pin
- stm32 Brain board 100pin
- stm32 Brain board 176pin
- CAN module CAN using SN65HVD230
- VR module Variable Reluctance conditioner board VR MAX9926
- Wideband module CJ125 Bosch Wideband board
- VND5E025AKTR double channel high-side driver with analog current sense (used on Dodge Neon 2003 test mule)
- BTS21400 ignition coil IGBT driver (used on Dodge Neon 2003 test mule)
- TLE6240 module integrated low side switch (fabricated, not tested)
- TLE6244 module integrated low side switch (never actually fabricated)
- TLE8810ED module integrated low side switch (fabricated, not tested)
- MC33816 common rail driver (never actually fabricated)
- LM1949 low impedance injector driver (never actually fabricated)
New modules are being added to https://github.com/rusefi/hw_modular
Some stuff we have given up on completely is located at https://github.com/rusefi/hw_legacy
Above mentioned modules are known to work unless stated otherwise
More rusEFI hardware
See https://github.com/rusefi/rusefi/wiki/Hardware
Frankenso
Frankenso has moved to https://github.com/rusefi/rusefi-hardware/tree/main/classic-designs
More info
See Hardware status forum thread todo: move hardware status content into git
Important note
rusEFI is currently transitioning from KiCAD 4 to KiCAD 5.
Important note
Depends on libraries from https://github.com/rusefi/kicad-libraries
If you download complete repo do not forget to download libraries. If you git clone be sure to also
git submodule update --init
git submodule update --init