mirror of https://github.com/rusefi/rusefi-1.git
49 lines
1.5 KiB
C
49 lines
1.5 KiB
C
/**
|
|
* @file thread_priority.h
|
|
* @brief This file sets the thread priority for the threads running on rusEFI
|
|
*
|
|
* @date February 27, 2021
|
|
* @author Matthew Kennedy, (c) 2021
|
|
*/
|
|
|
|
#pragma once
|
|
|
|
// ADC and ETB get highest priority - not much else actually runs the engine
|
|
#define PRIO_ADC (NORMALPRIO + 10)
|
|
#define PRIO_ETB (NORMALPRIO + 9)
|
|
|
|
// GPIO chips should be fast and go right back to sleep, plus can be timing sensitive
|
|
#define PRIO_GPIOCHIP (NORMALPRIO + 8)
|
|
|
|
// TX higher priority than RX because the ECU is generally the one transmitting the highest priority messages
|
|
#define PRIO_CAN_TX (NORMALPRIO + 7)
|
|
#define PRIO_CAN_RX (NORMALPRIO + 6)
|
|
|
|
// Less critical harware
|
|
#define PRIO_SERVO (NORMALPRIO + 5)
|
|
#define PRIO_STEPPER (NORMALPRIO + 5)
|
|
#define PRIO_CJ125 (NORMALPRIO + 5)
|
|
|
|
// Logging buffer flush is *slightly* above PRIO_CONSOLE so that we don't starve logging buffers during initialization and console commands
|
|
#define PRIO_TEXT_LOG (NORMALPRIO + 2)
|
|
|
|
// Console thread
|
|
#define PRIO_CONSOLE (NORMALPRIO + 1)
|
|
|
|
// Less important things
|
|
#define PRIO_MMC (NORMALPRIO - 1)
|
|
|
|
// These can get starved without too much adverse effect
|
|
#define PRIO_AUX_SERIAL NORMALPRIO
|
|
#define PRIO_KNOCK_PROCESS (NORMALPRIO - 10)
|
|
#define PRIO_HIP9011 (NORMALPRIO - 10)
|
|
|
|
// These are intentionally low priority so they can't get in the way of anything else
|
|
#define PRIO_FLASH_WRITE LOWPRIO + 20
|
|
|
|
// USB mass storage
|
|
#define MSD_THD_PRIO LOWPRIO + 20
|
|
|
|
// Lua interpreter must be lowest priority, as the user's code may get stuck in an infinite loop
|
|
#define PRIO_LUA LOWPRIO + 10
|