rusefi-1/misc/stm32f1_test_project
rusefi 35c356dce1 removing really old stuff 2018-12-15 22:14:17 -05:00
..
.cproject #381 progress 2017-03-24 13:49:18 -04:00
.project #381 progress 2017-03-24 13:49:18 -04:00
Makefile #381 progress 2017-03-24 13:49:18 -04:00
chconf.h #381 progress 2017-03-24 13:49:18 -04:00
clean_build.bat #381 progress 2017-03-24 13:49:18 -04:00
compile.bat #381 progress 2017-03-24 13:49:18 -04:00
flash.bat #381 progress 2017-03-24 13:49:18 -04:00
halconf.h #381 progress 2017-03-24 13:49:18 -04:00
main.c #381 progress 2017-03-24 13:49:18 -04:00
mcuconf.h #381 progress 2017-03-24 13:49:18 -04:00
readme.txt #381 progress 2017-03-24 13:49:18 -04:00

readme.txt

*****************************************************************************
** ChibiOS/RT port for ARM-Cortex-M3 STM32F103.                            **
*****************************************************************************

** TARGET **

The demo runs on an ST_NUCLEO_F103RB board.

** The Demo **

The demo flashes the board LED using a thread, by pressing the button located
on the board the test procedure is activated with output on the serial port
SD2 (USART2, mapped on USB virtual COM port).

** Build Procedure **

The demo has been tested by using the free Codesourcery GCC-based toolchain
and YAGARTO.
Just modify the TRGT line in the makefile in order to use different GCC ports.

** Notes **

Some files used by the demo are not part of ChibiOS/RT but are copyright of
ST Microelectronics and are licensed under a different license.
Also note that not all the files present in the ST library are distributed
with ChibiOS/RT, you can find the whole library on the ST web site:

                             http://www.st.com