mirror of https://github.com/rusefi/rusefi-1.git
52 lines
1.1 KiB
C
52 lines
1.1 KiB
C
/**
|
|
* @file usbconsole.c
|
|
* @brief USB-over-serial configuration
|
|
*
|
|
* @date Oct 14, 2013
|
|
* @author Andrey Belomutskiy, (c) 2012-2014
|
|
*/
|
|
|
|
#include "main.h"
|
|
|
|
#if EFI_PROD_CODE
|
|
|
|
#include "usbconsole.h"
|
|
#include "usbcfg.h"
|
|
#include "efifeatures.h"
|
|
|
|
extern SerialUSBDriver SDU1;
|
|
extern const SerialUSBConfig serusbcfg;
|
|
extern const USBConfig usbcfg;
|
|
|
|
void usb_serial_start(void) {
|
|
/*
|
|
* Initializes a serial-over-USB CDC driver.
|
|
*/
|
|
sduObjectInit(&SDU1);
|
|
sduStart(&SDU1, &serusbcfg);
|
|
|
|
/*
|
|
* Activates the USB driver and then the USB bus pull-up on D+.
|
|
* Note, a delay is inserted in order to not have to disconnect the cable
|
|
* after a reset.
|
|
*/
|
|
usbDisconnectBus(serusbcfg.usbp);
|
|
chThdSleepMilliseconds(1000);
|
|
usbStart(serusbcfg.usbp, &usbcfg);
|
|
usbConnectBus(serusbcfg.usbp);
|
|
|
|
/*
|
|
* Activates the serial driver 2 using the driver default configuration.
|
|
* PA2(TX) and PA3(RX) are routed to USART2.
|
|
*/
|
|
sdStart(&SD2, NULL);
|
|
palSetPadMode(GPIOA, 2, PAL_MODE_ALTERNATE(7));
|
|
palSetPadMode(GPIOA, 3, PAL_MODE_ALTERNATE(7));
|
|
}
|
|
|
|
bool is_usb_serial_ready(void) {
|
|
return SDU1.config->usbp->state == USB_ACTIVE;
|
|
}
|
|
|
|
#endif
|