mirror of https://github.com/rusefi/rusefi-1.git
b8a9213ca0
|
||
|---|---|---|
| .. | ||
| timer | ||
| .cproject | ||
| .project | ||
| Makefile | ||
| can.cpp | ||
| can.h | ||
| chconf.h | ||
| clean_build.bat | ||
| compile.bat | ||
| flash.bat | ||
| halconf.h | ||
| main.cpp | ||
| mcuconf.h | ||
| readme.txt | ||
| spi.cpp | ||
| spi.h | ||
| uart.cpp | ||
| uart.h | ||
readme.txt
*****************************************************************************
** ChibiOS/RT port for ARM-Cortex-M3 STM32F103. **
*****************************************************************************
** TARGET **
The demo runs on an ST_NUCLEO_F103RB board.
** The Demo **
The demo flashes the board LED using a thread, by pressing the button located
on the board the test procedure is activated with output on the serial port
SD2 (USART2, mapped on USB virtual COM port).
** Build Procedure **
The demo has been tested by using the free Codesourcery GCC-based toolchain
and YAGARTO.
Just modify the TRGT line in the makefile in order to use different GCC ports.
** Notes **
Some files used by the demo are not part of ChibiOS/RT but are copyright of
ST Microelectronics and are licensed under a different license.
Also note that not all the files present in the ST library are distributed
with ChibiOS/RT, you can find the whole library on the ST web site:
http://www.st.com