.. |
gppwm
|
migrating to SensorType::Rpm API
|
2022-01-20 23:54:52 -05:00 |
ac_control.cpp
|
Let's always have TS structure so that unit tests can check values in outputChannels, kind of making outputChannels a god dump for state but whatever since Live View is coming
|
2021-12-07 20:18:47 -05:00 |
ac_control.h
|
AC is EngineModule (#3604)
|
2021-11-25 07:59:31 -05:00 |
ac_control.txt
|
better file locations
|
2021-10-16 20:17:01 -04:00 |
ac_control_generated.h
|
Auto-generated configs and docs
|
2022-01-05 06:49:51 +00:00 |
alternator_controller.cpp
|
safer file name (#3861)
|
2022-01-31 21:51:32 -05:00 |
alternator_controller.h
|
Alternator controller is engine module (#3663)
|
2021-12-05 18:33:50 -05:00 |
boost_control.cpp
|
migrating to SensorType::Rpm API
|
2022-01-20 22:22:52 -05:00 |
boost_control.h
|
safer file name (#3861)
|
2022-01-31 21:51:32 -05:00 |
boost_control.txt
|
live data progress
|
2022-01-02 01:17:22 -05:00 |
boost_control_generated.h
|
Auto-generated configs and docs
|
2022-01-05 06:49:51 +00:00 |
dc_motors.cpp
|
Stepper direct push pull driver (#3751)
|
2022-01-07 11:38:48 -05:00 |
dc_motors.h
|
Stepper direct push pull driver (#3751)
|
2022-01-07 11:38:48 -05:00 |
electronic_throttle.cpp
|
migrating to SensorType::Rpm API
|
2022-01-20 22:40:15 -05:00 |
electronic_throttle.h
|
Final cleanup of ENGINE macros (#3567)
|
2021-11-17 13:45:10 -05:00 |
electronic_throttle_impl.h
|
safer file name (#3861)
|
2022-01-31 21:51:32 -05:00 |
fan_control.cpp
|
make fan control live-data-friendly (#3626)
|
2021-11-28 00:40:12 -05:00 |
fan_control.h
|
make fan control live-data-friendly (#3626)
|
2021-11-28 00:40:12 -05:00 |
fan_control.txt
|
make fan control live-data-friendly (#3626)
|
2021-11-28 00:40:12 -05:00 |
fan_control_generated.h
|
Auto-generated configs and docs
|
2022-01-05 06:49:51 +00:00 |
fuel_pump.cpp
|
Better handling of RPM during stop of cranking #3803
|
2022-01-17 20:53:10 -05:00 |
fuel_pump.h
|
ignition controller detects rising edge on voltage (#3636)
|
2021-12-07 21:28:04 -05:00 |
fuel_pump.txt
|
live data progress
|
2022-01-02 01:17:22 -05:00 |
fuel_pump_generated.h
|
Auto-generated configs and docs
|
2022-01-05 06:49:51 +00:00 |
idle_hardware.cpp
|
Stepper direct push pull driver (#3751)
|
2022-01-07 11:38:48 -05:00 |
idle_hardware.h
|
remove engine pointer passing (#3556)
|
2021-11-16 04:15:29 -05:00 |
idle_state.txt
|
live view is confused by conditional compilation fix #3773
|
2022-01-11 14:10:30 -05:00 |
idle_state_generated.h
|
live view is confused by conditional compilation fix #3773
|
2022-01-11 14:10:30 -05:00 |
idle_thread.cpp
|
migrating to SensorType::Rpm API
|
2022-01-20 22:51:20 -05:00 |
idle_thread.h
|
safer file name (#3861)
|
2022-01-31 21:51:32 -05:00 |
idle_thread_io.cpp
|
RE usability: live data for idle controller
|
2022-01-10 21:55:52 -05:00 |
main_relay.cpp
|
ignition controller detects rising edge on voltage (#3636)
|
2021-12-07 21:28:04 -05:00 |
main_relay.h
|
ignition controller detects rising edge on voltage (#3636)
|
2021-12-07 21:28:04 -05:00 |
main_relay.txt
|
main relay controller handles delayed shutdown
|
2022-02-01 23:12:50 -05:00 |
main_relay_generated.h
|
Auto-generated configs and docs
|
2022-02-02 04:22:53 +00:00 |
pwm_tester.cpp
|
Programmatically replace ENGINE() and CONFIG() with engine-> etc (#3565)
|
2021-11-17 03:54:21 -05:00 |
pwm_tester.h
|
…
|
|
vvt.cpp
|
Remove fsio part 1 (#3871)
|
2022-02-01 15:42:04 -05:00 |
vvt.h
|
safer file name (#3861)
|
2022-01-31 21:51:32 -05:00 |