mirror of https://github.com/rusefi/rusefi-1.git
592 lines
18 KiB
C++
592 lines
18 KiB
C++
/*
|
|
* @file mc33816.cpp
|
|
*
|
|
* The NXP MC33816 is a programmable gate driver IC for precision solenoid control applications.
|
|
*
|
|
*
|
|
* Useful wires:
|
|
* 5v, 3(3.3v), Gnd, 12v, VccIO(3v) SPI, DRVEN, RSTB
|
|
*
|
|
* For MC33816 vs PT2000 differences see
|
|
* https://www.nxp.com/docs/en/application-note/AN5203.pdf
|
|
*
|
|
* @date May 3, 2019
|
|
* @author Andrey Belomutskiy, (c) 2012-2020
|
|
*/
|
|
|
|
#include "pch.h"
|
|
|
|
#if EFI_MC33816
|
|
|
|
#include "mc33816.h"
|
|
#include "mc33816_memory_map.h"
|
|
#include "hardware.h"
|
|
#include "mc33816/rusefi/sample_code/PT2001_LoadData.h"
|
|
#include "mpu_util.h"
|
|
|
|
static bool isInitializaed = false;
|
|
|
|
static OutputPin chipSelect;
|
|
static OutputPin resetB;
|
|
static OutputPin driven;
|
|
|
|
static bool flag0before = false;
|
|
static bool flag0after = false;
|
|
|
|
static unsigned short mcChipId;
|
|
static unsigned short mcDriverStatus;
|
|
|
|
static SPIConfig spiCfg = { .circular = false,
|
|
.end_cb = NULL,
|
|
.ssport = NULL,
|
|
.sspad = 0,
|
|
.cr1 =
|
|
SPI_CR1_16BIT_MODE |
|
|
SPI_CR1_MSTR |
|
|
//SPI_CR1_BR_1 // 5MHz
|
|
SPI_CR1_CPHA | SPI_CR1_BR_0 | SPI_CR1_BR_1 | SPI_CR1_BR_2 | SPI_CR1_SPE,
|
|
.cr2 = SPI_CR2_SSOE};
|
|
|
|
static SPIDriver *driver;
|
|
|
|
static bool validateChipId() {
|
|
return (mcChipId >> 8) == 0x9D;
|
|
}
|
|
|
|
static void showStats() {
|
|
if (!isInitializaed) {
|
|
efiPrintf("WAITINIG FOR VBatt...");
|
|
}
|
|
// x9D is product code or something, and 43 is the revision?
|
|
efiPrintf("MC 0x%x %s", mcChipId, validateChipId() ? "hooray!" : "not hooray :(");
|
|
|
|
if (isBrainPinValid(engineConfiguration->mc33816_flag0)) {
|
|
efiPrintf("flag0 before %d after %d", flag0before, flag0after);
|
|
|
|
efiPrintf("flag0 right now %d", efiReadPin(engineConfiguration->mc33816_flag0));
|
|
|
|
} else {
|
|
efiPrintf("No flag0 pin selected");
|
|
}
|
|
efiPrintf("MC voltage %d", engineConfiguration->mc33_hvolt);
|
|
efiPrintf("MC driver status 0x%x", mcDriverStatus);
|
|
}
|
|
|
|
static void initMc33816IfNeeded();
|
|
static void mcRestart();
|
|
|
|
|
|
// Receive 16bits
|
|
unsigned short recv_16bit_spi() {
|
|
return spiPolledExchange(driver, 0xFFFF);
|
|
}
|
|
|
|
// This could be used to detect if check byte is wrong.. or use a FLAG after init
|
|
unsigned short txrx_16bit_spi(const unsigned short param) {
|
|
return spiPolledExchange(driver, param);
|
|
}
|
|
|
|
// Send 16bits
|
|
static void spi_writew(unsigned short param) {
|
|
//spiSelect(driver);
|
|
spiPolledExchange(driver, param);
|
|
//spiUnselect(driver);
|
|
}
|
|
|
|
static void setup_spi() {
|
|
spiSelect(driver);
|
|
// Select Channel command
|
|
spi_writew(0x7FE1);
|
|
// Common Page
|
|
spi_writew(0x0004);
|
|
|
|
|
|
// Configure SPI command
|
|
spi_writew(0x3901);
|
|
// Mode A + Watchdog timer full
|
|
//spi_writew(0x001F);
|
|
spi_writew(0x009F); // + fast slew rate on miso
|
|
spiUnselect(driver);
|
|
}
|
|
|
|
static unsigned short readId() {
|
|
spiSelect(driver);
|
|
spi_writew(0xBAA1);
|
|
unsigned short ID = recv_16bit_spi();
|
|
spiUnselect(driver);
|
|
return ID;
|
|
}
|
|
|
|
// Read a single word in Data RAM
|
|
unsigned short mcReadDram(MC33816Mem addr) {
|
|
uint16_t addrInt = static_cast<uint16_t>(addr);
|
|
|
|
unsigned short readValue;
|
|
spiSelect(driver);
|
|
// Select Channel command, Common Page
|
|
spi_writew(0x7FE1);
|
|
spi_writew(0x0004);
|
|
// read (MSB=1) at data ram x9 (SCV_I_Hold), and 1 word
|
|
spi_writew((0x8000 | addrInt << 5) + 1);
|
|
readValue = recv_16bit_spi();
|
|
|
|
spiUnselect(driver);
|
|
return readValue;
|
|
}
|
|
|
|
// Update a single word in Data RAM
|
|
void mcUpdateDram(MC33816Mem addr, unsigned short data) {
|
|
uint16_t addrInt = static_cast<uint16_t>(addr);
|
|
|
|
spiSelect(driver);
|
|
// Select Channel command, Common Page
|
|
spi_writew(0x7FE1);
|
|
spi_writew(0x0004);
|
|
// write (MSB=0) at data ram x9 (SCV_I_Hold), and 1 word
|
|
spi_writew((addrInt << 5) + 1);
|
|
spi_writew(data);
|
|
|
|
spiUnselect(driver);
|
|
}
|
|
|
|
static short dacEquation(unsigned short current) {
|
|
/*
|
|
Current, given in mA->A
|
|
I = (DAC_VALUE * V_DAC_LSB - V_DA_BIAS)/(G_DA_DIFF * R_SENSEx)
|
|
DAC_VALUE = ((I*G_DA_DIFF * R_SENSEx) + V_DA_BIAS) / V_DAC_LSB
|
|
V_DAC_LSB is the DAC resolution = 9.77mv
|
|
V_DA_BIAS = 250mV
|
|
G_DA_DIFF = Gain: 5.79, 8.68, [12.53], 19.25
|
|
R_SENSE = 10mOhm soldered on board
|
|
*/
|
|
return (short)(((current/1000.0f * 12.53f * 10) + 250.0f) / 9.77f);
|
|
}
|
|
|
|
static void setTimings() {
|
|
|
|
// Convert mA to DAC values
|
|
mcUpdateDram(MC33816Mem::Iboost, dacEquation(engineConfiguration->mc33_i_boost));
|
|
mcUpdateDram(MC33816Mem::Ipeak, dacEquation(engineConfiguration->mc33_i_peak));
|
|
mcUpdateDram(MC33816Mem::Ihold, dacEquation(engineConfiguration->mc33_i_hold));
|
|
|
|
// uint16_t mc33_t_max_boost; // not yet implemented in microcode
|
|
|
|
// in micro seconds to clock cycles
|
|
mcUpdateDram(MC33816Mem::Tpeak_off, (MC_CK * engineConfiguration->mc33_t_peak_off));
|
|
mcUpdateDram(MC33816Mem::Tpeak_tot, (MC_CK * engineConfiguration->mc33_t_peak_tot));
|
|
mcUpdateDram(MC33816Mem::Tbypass, (MC_CK * engineConfiguration->mc33_t_bypass));
|
|
mcUpdateDram(MC33816Mem::Thold_off, (MC_CK * engineConfiguration->mc33_t_hold_off));
|
|
mcUpdateDram(MC33816Mem::Thold_tot, (MC_CK * engineConfiguration->mc33_t_hold_tot));
|
|
mcUpdateDram(MC33816Mem::Tboost_min, (MC_CK * engineConfiguration->mc33_t_min_boost));
|
|
mcUpdateDram(MC33816Mem::Tboost_max, (MC_CK * engineConfiguration->mc33_t_max_boost));
|
|
|
|
// HPFP solenoid settings
|
|
mcUpdateDram(MC33816Mem::HPFP_Ipeak,
|
|
dacEquation(engineConfiguration->mc33_hpfp_i_peak * 1000));
|
|
mcUpdateDram(MC33816Mem::HPFP_Ihold,
|
|
dacEquation(engineConfiguration->mc33_hpfp_i_hold * 1000));
|
|
mcUpdateDram(MC33816Mem::HPFP_Thold_off,
|
|
std::min(MC_CK * engineConfiguration->mc33_hpfp_i_hold_off,
|
|
UINT16_MAX));
|
|
// Note, if I'm reading this right, the use of the short and the given clock speed means
|
|
// the max time here is approx 10ms.
|
|
mcUpdateDram(MC33816Mem::HPFP_Thold_tot,
|
|
std::min(MC_CK * 1000 * engineConfiguration->mc33_hpfp_max_hold,
|
|
UINT16_MAX));
|
|
}
|
|
|
|
void setBoostVoltage(float volts)
|
|
{
|
|
// Sanity checks, Datasheet says not too high, nor too low
|
|
if (volts > 65.0f) {
|
|
firmwareError(OBD_PCM_Processor_Fault, "DI Boost voltage setpoint too high: %.1f", volts);
|
|
return;
|
|
}
|
|
if (volts < 10.0f) {
|
|
firmwareError(OBD_PCM_Processor_Fault, "DI Boost voltage setpoint too low: %.1f", volts);
|
|
return;
|
|
}
|
|
// There's a 1/32 divider on the input, then the DAC's output is 9.77mV per LSB. (1 / 32) / 0.00977 = 3.199 counts per volt.
|
|
unsigned short data = volts * 3.2;
|
|
mcUpdateDram(MC33816Mem::Vboost_high, data+1);
|
|
mcUpdateDram(MC33816Mem::Vboost_low, data-1);
|
|
// Remember to strobe driven!!
|
|
}
|
|
|
|
static bool check_flash() {
|
|
spiSelect(driver);
|
|
|
|
// ch1
|
|
// read (MSB=1) at location, and 1 word
|
|
spi_writew((0x8000 | 0x100 << 5) + 1);
|
|
if (!(recv_16bit_spi() & (1<<5))) {
|
|
spiUnselect(driver);
|
|
return false;
|
|
}
|
|
|
|
// ch2
|
|
// read (MSB=1) at location, and 1 word
|
|
spi_writew((0x8000 | 0x120 << 5) + 1);
|
|
|
|
if (!(recv_16bit_spi() & (1<<5))) {
|
|
spiUnselect(driver);
|
|
return false;
|
|
}
|
|
|
|
spiUnselect(driver);
|
|
return true;
|
|
}
|
|
|
|
static void mcClearDriverStatus(){
|
|
// Note: There is a config at 0x1CE & 1 that can reset this status config register on read
|
|
// otherwise the reload/recheck occurs with this write
|
|
// resetting it is necessary to clear default reset behavoir, as well as if an issue has been resolved
|
|
setup_spi(); // ensure on common page?
|
|
spiSelect(driver);
|
|
spi_writew((0x0000 | 0x1D2 << 5) + 1); // write, location, one word
|
|
spi_writew(0x0000); // anything to clear
|
|
spiUnselect(driver);
|
|
}
|
|
|
|
static unsigned short readDriverStatus(){
|
|
unsigned short driverStatus;
|
|
setup_spi(); // ensure on common page?
|
|
spiSelect(driver);
|
|
spi_writew((0x8000 | 0x1D2 << 5) + 1);
|
|
driverStatus = recv_16bit_spi();
|
|
spiUnselect(driver);
|
|
return driverStatus;
|
|
}
|
|
|
|
static bool checkUndervoltVccP(unsigned short driverStatus){
|
|
return (driverStatus & (1<<0));
|
|
}
|
|
|
|
static bool checkUndervoltV5(unsigned short driverStatus){
|
|
return (driverStatus & (1<<1));
|
|
}
|
|
|
|
static bool checkOverTemp(unsigned short driverStatus){
|
|
return (driverStatus & (1<<3));
|
|
}
|
|
|
|
static bool checkDrivenEnabled(unsigned short driverStatus){
|
|
return (driverStatus & (1<<4));
|
|
}
|
|
|
|
static void enable_flash() {
|
|
spiSelect(driver);
|
|
spi_writew(0x2001); //ch1
|
|
spi_writew(0x0018); //enable flash
|
|
spi_writew(0x2401); //ch2
|
|
spi_writew(0x0018); // enable flash
|
|
spiUnselect(driver);
|
|
}
|
|
|
|
static void download_RAM(int target) {
|
|
uint16_t memory_area = 0; // memory area
|
|
uint16_t start_address = 0; // start address
|
|
uint16_t codeWidthRegAddr = 0; // code width register address
|
|
uint16_t size = 0; // size of RAM data
|
|
uint16_t command = 0; // command data
|
|
const uint16_t *RAM_ptr; // pointer to array of data to be sent to the chip
|
|
|
|
|
|
//Why Again? For Every time, just in case?
|
|
setup_spi();
|
|
|
|
switch(target) // selects target
|
|
{
|
|
case CODE_RAM1:
|
|
memory_area = 0x1;
|
|
start_address = 0;
|
|
codeWidthRegAddr = 0x107;
|
|
RAM_ptr = PT2001_code_RAM1;
|
|
size = sizeof(PT2001_code_RAM1) / 2;
|
|
break;
|
|
|
|
case CODE_RAM2:
|
|
memory_area = 0x2;
|
|
start_address = 0;
|
|
codeWidthRegAddr = 0x127;
|
|
RAM_ptr = PT2001_code_RAM2;
|
|
size = sizeof(PT2001_code_RAM2) / 2;
|
|
break;
|
|
|
|
case DATA_RAM: // ch1 only?
|
|
memory_area = 0x4;
|
|
start_address = 0;
|
|
RAM_ptr = PT2001_data_RAM;
|
|
size = sizeof(PT2001_data_RAM) / 2;
|
|
break;
|
|
// optional, both data_rams with 0x3, writes same code to both
|
|
default:
|
|
break;
|
|
}
|
|
|
|
// Chip-Select high
|
|
spiSelect(driver);
|
|
|
|
if (target != DATA_RAM)
|
|
{
|
|
command = codeWidthRegAddr << 5; // control width register address
|
|
command |= 1; // number of words to follow
|
|
spi_writew(command); // sends code_width command
|
|
spi_writew(size); // sends size (Code Width)
|
|
}
|
|
|
|
// Select Channel command
|
|
spi_writew(0x7FE1);
|
|
// RAM1, RAM2, or Common Page (Data RAM)
|
|
spi_writew(memory_area);
|
|
|
|
// "Command" of starting address
|
|
// up to 0x03FE of code ram
|
|
// up to 0x0080 of data ram
|
|
command = start_address << 5;
|
|
spi_writew(command); // sends start address command
|
|
|
|
spiSend(driver, size, RAM_ptr);
|
|
spiUnselect(driver);
|
|
}
|
|
|
|
static void download_register(int r_target) {
|
|
uint16_t r_start_address = 0; // start address
|
|
uint16_t r_size = 0; // size of configuration data
|
|
uint16_t r_command = 0; // command data
|
|
uint16_t remainder_size = 0; // remainder size
|
|
const uint16_t *reg_ptr; // pointer to array of data to be sent to the chip
|
|
|
|
switch(r_target) // selects target
|
|
{
|
|
case REG_CH1: // channel 1 configurations
|
|
r_start_address = 0x100;
|
|
reg_ptr = PT2001_ch1_config;
|
|
r_size = sizeof(PT2001_ch1_config) / 2; // gets number of words to be sent
|
|
break;
|
|
|
|
case REG_CH2: // channel 2 configurations
|
|
r_start_address = 0x120;
|
|
reg_ptr = PT2001_ch2_config;
|
|
r_size = sizeof(PT2001_ch2_config) / 2; // gets number of words to be sent
|
|
break;
|
|
|
|
case REG_DIAG: // diagnostic configurations
|
|
r_start_address = 0x140;
|
|
reg_ptr = PT2001_diag_config;
|
|
r_size = sizeof(PT2001_diag_config) / 2; // gets number of words to be sent
|
|
break;
|
|
|
|
case REG_IO: // IO configurations
|
|
r_start_address = 0x180;
|
|
reg_ptr = PT2001_io_config;
|
|
r_size = sizeof(PT2001_io_config) / 2; // gets number of words to be sent
|
|
break;
|
|
|
|
case REG_MAIN: // main configurations
|
|
r_start_address = 0x1C0;
|
|
reg_ptr = PT2001_main_config;
|
|
r_size = sizeof(PT2001_main_config) / 2; // gets number of words to be sent
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
//for location < size(remainder?)
|
|
// is location == 0? or past max xfer, send command + expected size
|
|
// if location = max xfer
|
|
//
|
|
// retrieve data, send it, increase pointer
|
|
// increase
|
|
|
|
if (r_size > MAX_SPI_MODE_A_TRANSFER_SIZE) //if size is too large, split into two sections ... MULTIPLE sections..
|
|
{
|
|
remainder_size = r_size - MAX_SPI_MODE_A_TRANSFER_SIZE; // creates remaining size
|
|
r_size = MAX_SPI_MODE_A_TRANSFER_SIZE; // sets first size
|
|
}
|
|
|
|
r_command = r_start_address << 5; // start address
|
|
r_command += r_size; // number of words to follow
|
|
|
|
spiSelect(driver); // Chip
|
|
|
|
spi_writew(r_command); // sends address and number of words to be sent
|
|
|
|
spiSend(driver, r_size, reg_ptr);
|
|
|
|
if (remainder_size > 0) // if remainder size is greater than 0, download the rest
|
|
{
|
|
r_start_address += r_size; // new start address
|
|
r_command = r_start_address << 5; // start address
|
|
r_command += remainder_size; // number of words to follow
|
|
|
|
spi_writew(r_command); // sends address and number of words to be sent
|
|
spiSend(driver, remainder_size, reg_ptr + r_size);
|
|
}
|
|
spiUnselect(driver);
|
|
}
|
|
|
|
void initMc33816() {
|
|
//
|
|
// see setTest33816EngineConfiguration for default configuration
|
|
// Pins
|
|
if (!isBrainPinValid(engineConfiguration->mc33816_cs) ||
|
|
!isBrainPinValid(engineConfiguration->mc33816_rstb) ||
|
|
!isBrainPinValid(engineConfiguration->mc33816_driven)) {
|
|
return;
|
|
}
|
|
if (isBrainPinValid(engineConfiguration->mc33816_flag0)) {
|
|
efiSetPadMode("mc33816 flag0", engineConfiguration->mc33816_flag0, getInputMode(PI_DEFAULT));
|
|
}
|
|
|
|
chipSelect.initPin("mc33 CS", engineConfiguration->mc33816_cs /*, &engineConfiguration->csPinMode*/);
|
|
|
|
// Initialize the chip via ResetB
|
|
resetB.initPin("mc33 RESTB", engineConfiguration->mc33816_rstb);
|
|
// High Voltage via DRIVEN
|
|
driven.initPin("mc33 DRIVEN", engineConfiguration->mc33816_driven);
|
|
|
|
|
|
spiCfg.ssport = getHwPort("hip", engineConfiguration->mc33816_cs);
|
|
spiCfg.sspad = getHwPin("hip", engineConfiguration->mc33816_cs);
|
|
|
|
// hard-coded for now, just resolve the conflict with SD card!
|
|
engineConfiguration->mc33816spiDevice = SPI_DEVICE_3;
|
|
|
|
driver = getSpiDevice(engineConfiguration->mc33816spiDevice);
|
|
if (driver == NULL) {
|
|
// error already reported
|
|
return;
|
|
}
|
|
|
|
spiStart(driver, &spiCfg);
|
|
|
|
addConsoleAction("mc33_stats", showStats);
|
|
addConsoleAction("mc33_restart", mcRestart);
|
|
//addConsoleActionI("mc33_send", sendWord);
|
|
|
|
initMc33816IfNeeded();
|
|
}
|
|
|
|
static void mcShutdown() {
|
|
driven.setValue(0); // ensure HV is off
|
|
resetB.setValue(0); // turn off the chip
|
|
}
|
|
|
|
static void mcRestart() {
|
|
flag0before = false;
|
|
flag0after = false;
|
|
|
|
efiPrintf("MC Restart");
|
|
showStats();
|
|
|
|
driven.setValue(0); // ensure driven is off
|
|
|
|
if (Sensor::get(SensorType::BatteryVoltage).value_or(VBAT_FALLBACK_VALUE) < LOW_VBATT) {
|
|
efiPrintf("GDI not Restarting until we see VBatt");
|
|
return;
|
|
}
|
|
|
|
// Does starting turn this high to begin with??
|
|
spiUnselect(driver);
|
|
|
|
//delay/wait? .. possibly only 30us for each needed, per datasheet
|
|
resetB.setValue(0);
|
|
chThdSleepMilliseconds(10);
|
|
resetB.setValue(1);
|
|
chThdSleepMilliseconds(10);
|
|
if (isBrainPinValid(engineConfiguration->mc33816_flag0)) {
|
|
flag0before = efiReadPin(engineConfiguration->mc33816_flag0);
|
|
}
|
|
|
|
|
|
setup_spi();
|
|
|
|
mcClearDriverStatus(); // Initial clear necessary
|
|
mcDriverStatus = readDriverStatus();
|
|
if (checkUndervoltV5(mcDriverStatus)) {
|
|
firmwareError(OBD_PCM_Processor_Fault, "MC33 5V Under-Voltage!");
|
|
mcShutdown();
|
|
return;
|
|
}
|
|
|
|
mcChipId = readId();
|
|
if (!validateChipId()) {
|
|
firmwareError(OBD_PCM_Processor_Fault, "No comm with MC33");
|
|
mcShutdown();
|
|
return;
|
|
}
|
|
|
|
download_RAM(CODE_RAM1); // transfers code RAM1
|
|
download_RAM(CODE_RAM2); // transfers code RAM2
|
|
download_RAM(DATA_RAM); // transfers data RAM
|
|
/**
|
|
* current configuration of REG_MAIN would toggle flag0 from LOW to HIGH
|
|
*/
|
|
download_register(REG_MAIN); // download main register configurations
|
|
if (isBrainPinValid(engineConfiguration->mc33816_flag0)) {
|
|
flag0after = efiReadPin(engineConfiguration->mc33816_flag0);
|
|
if (flag0before || !flag0after) {
|
|
firmwareError(OBD_PCM_Processor_Fault, "MC33 flag0 transition no buena");
|
|
mcShutdown();
|
|
return;
|
|
}
|
|
}
|
|
|
|
download_register(REG_CH1); // download channel 1 register configurations
|
|
download_register(REG_CH2); // download channel 2 register configurations
|
|
download_register(REG_IO); // download IO register configurations
|
|
download_register(REG_DIAG); // download diag register configuration
|
|
|
|
setTimings();
|
|
|
|
// Finished downloading, let's run the code
|
|
enable_flash();
|
|
if (!check_flash()) {
|
|
firmwareError(OBD_PCM_Processor_Fault, "MC33 no flash");
|
|
mcShutdown();
|
|
return;
|
|
}
|
|
|
|
mcDriverStatus = readDriverStatus();
|
|
if (checkUndervoltVccP(mcDriverStatus)) {
|
|
firmwareError(OBD_PCM_Processor_Fault, "MC33 VccP (7V) Under-Voltage!");
|
|
mcShutdown();
|
|
return;
|
|
}
|
|
|
|
// Drive High Voltage if possible
|
|
setBoostVoltage(engineConfiguration->mc33_hvolt);
|
|
driven.setValue(1); // driven = HV
|
|
chThdSleepMilliseconds(10); // Give it a moment
|
|
mcDriverStatus = readDriverStatus();
|
|
if (!checkDrivenEnabled(mcDriverStatus)) {
|
|
firmwareError(OBD_PCM_Processor_Fault, "MC33 Driven did not stick!");
|
|
mcShutdown();
|
|
return;
|
|
}
|
|
|
|
mcDriverStatus = readDriverStatus();
|
|
if (checkUndervoltVccP(mcDriverStatus)) {
|
|
firmwareError(OBD_PCM_Processor_Fault, "MC33 VccP Under-Voltage After Driven"); // Likely DC-DC LS7 is dead!
|
|
mcShutdown();
|
|
return;
|
|
}
|
|
}
|
|
|
|
static void initMc33816IfNeeded() {
|
|
if (Sensor::get(SensorType::BatteryVoltage).value_or(VBAT_FALLBACK_VALUE) < LOW_VBATT) {
|
|
isInitializaed = false;
|
|
} else {
|
|
if (!isInitializaed) {
|
|
// WARNING: 'mcRestart' current implementation works in non-irq user content only
|
|
// note all the locking SPI API usage
|
|
mcRestart();
|
|
isInitializaed = true;
|
|
}
|
|
}
|
|
}
|
|
|
|
#endif /* EFI_MC33816 */
|