mirror of https://github.com/rusefi/rusefi-1.git
83 lines
2.5 KiB
C++
83 lines
2.5 KiB
C++
/*
|
|
* @file lada_kalina.cpp
|
|
*
|
|
* set engine_type 39
|
|
*
|
|
* @date Jan 21, 2016
|
|
* @author Andrey Belomutskiy, (c) 2012-2020
|
|
*/
|
|
|
|
#include "lada_kalina.h"
|
|
#include "custom_engine.h"
|
|
#include "fsio_impl.h"
|
|
|
|
EXTERN_CONFIG;
|
|
|
|
#if (BOARD_TLE8888_COUNT > 0)
|
|
void setLadaKalina(DECLARE_CONFIG_PARAMETER_SIGNATURE) {
|
|
/* MRE uses TLE8888_PIN_21 for fuel pump */
|
|
engineConfiguration->fuelPumpPin = GPIO_UNASSIGNED;
|
|
/* PRE uses TLE8888_PIN_22 for fan */
|
|
engineConfiguration->fanPin = GPIO_UNASSIGNED;
|
|
// TLE8888 two bridge drivers for stepper
|
|
engineConfiguration->stepperDcIo[0].directionPin1 = TLE8888_PIN_21;
|
|
engineConfiguration->stepperDcIo[0].directionPin2 = TLE8888_PIN_22;
|
|
engineConfiguration->stepperDcIo[1].directionPin1 = TLE8888_PIN_23;
|
|
engineConfiguration->stepperDcIo[1].directionPin2 = TLE8888_PIN_24;
|
|
/* IDLE configuration */
|
|
engineConfiguration->useStepperIdle = true;
|
|
engineConfiguration->useHbridges = true;
|
|
engineConfiguration->idleMode = IM_AUTO;
|
|
engineConfiguration->useTLE8888_stepper = true;
|
|
}
|
|
|
|
#else
|
|
|
|
void setLadaKalina(DECLARE_CONFIG_PARAMETER_SIGNATURE) {
|
|
setFrankensoConfiguration(PASS_CONFIG_PARAMETER_SIGNATURE);
|
|
disableLCD(engineConfiguration);
|
|
|
|
engineConfiguration->HD44780_rs = GPIO_UNASSIGNED;
|
|
engineConfiguration->HD44780_e = GPIO_UNASSIGNED;
|
|
engineConfiguration->HD44780_db4 = GPIO_UNASSIGNED;
|
|
engineConfiguration->HD44780_db5 = GPIO_UNASSIGNED;
|
|
engineConfiguration->HD44780_db6 = GPIO_UNASSIGNED;
|
|
engineConfiguration->HD44780_db7 = GPIO_UNASSIGNED;
|
|
|
|
|
|
setOperationMode(engineConfiguration, FOUR_STROKE_CRANK_SENSOR);
|
|
engineConfiguration->trigger.type = TT_TOOTHED_WHEEL_60_2;
|
|
|
|
engineConfiguration->triggerInputPins[0] = GPIOA_5;
|
|
engineConfiguration->triggerInputPins[1] = GPIO_UNASSIGNED;
|
|
|
|
engineConfiguration->globalTriggerAngleOffset = 114;
|
|
|
|
engineConfiguration->ignitionPins[0] = GPIOE_14;
|
|
engineConfiguration->ignitionPins[1] = GPIOC_7;
|
|
engineConfiguration->ignitionPins[2] = GPIOC_9;
|
|
engineConfiguration->ignitionPins[3] = GPIOE_12;
|
|
|
|
engineConfiguration->useStepperIdle = true;
|
|
engineConfiguration->fuelPumpPin = GPIOC_13;
|
|
engineConfiguration->mainRelayPin = GPIOD_7;
|
|
|
|
engineConfiguration->idle.stepperDirectionPin = GPIOE_15;
|
|
engineConfiguration->idle.stepperStepPin = GPIOE_13;
|
|
engineConfiguration->stepperEnablePin = GPIOE_11;
|
|
|
|
|
|
|
|
// starter relay solenoid
|
|
#if EFI_FSIO
|
|
/**
|
|
* to test
|
|
* set_fsio_setting 1 5000
|
|
*/
|
|
engineConfiguration->fsio_setting[0] = 500;
|
|
// set_rpn_expression 1 "rpm 0 fsio_setting <"
|
|
setFsioExt(0, GPIOE_3, RPM_BELOW_USER_SETTING_1, 0 PASS_CONFIG_PARAMETER_SUFFIX);
|
|
#endif /* EFI_FSIO */
|
|
}
|
|
#endif
|