rusefi-full/firmware/hw_layer/hw_layer.mk

HW_LAYER_EGT = $(PROJECT_DIR)/hw_layer/serial_over_usb/usbcfg.c \
	$(PROJECT_DIR)/hw_layer/serial_over_usb/usbconsole.c

HW_LAYER_EGT_CPP = $(PROJECT_DIR)/hw_layer/can_hw.cpp \
	$(PROJECT_DIR)/hw_layer/max31855.cpp

HW_LAYER_EMS = $(HW_LAYER_EGT) \
	$(PROJECT_DIR)/hw_layer/mcp3208.c \
	$(PROJECT_DIR)/hw_layer/flash.c
		
HW_LAYER_EMS_CPP = $(HW_LAYER_EGT_CPP) \
	$(PROJECT_DIR)/hw_layer/pin_repository.cpp \
	$(PROJECT_DIR)/hw_layer/microsecond_timer.cpp \
	$(PROJECT_DIR)/hw_layer/digital_input_hw.cpp \
	$(PROJECT_DIR)/hw_layer/digital_input_exti.cpp \
	$(PROJECT_DIR)/hw_layer/hardware.cpp \
	$(PROJECT_DIR)/hw_layer/smart_gpio.cpp \
	$(PROJECT_DIR)/hw_layer/neo6m.cpp \
	$(PROJECT_DIR)/hw_layer/mmc_card.cpp \
	$(PROJECT_DIR)/hw_layer/lcd/lcd_HD44780.cpp \
 	$(PROJECT_DIR)/hw_layer/adc_inputs.cpp \
	$(PROJECT_DIR)/hw_layer/board_test.cpp \
	$(PROJECT_DIR)/hw_layer/pwm_generator.cpp \
	$(PROJECT_DIR)/hw_layer/trigger_input.cpp \
	$(PROJECT_DIR)/hw_layer/hip9011.cpp \
	$(PROJECT_DIR)/hw_layer/mc33816.cpp \
	$(PROJECT_DIR)/hw_layer/hip9011_logic.cpp \
	$(PROJECT_DIR)/hw_layer/vehicle_speed.cpp \
	$(PROJECT_DIR)/hw_layer/stepper.cpp \
	$(PROJECT_DIR)/hw_layer/servo.cpp \
	$(PROJECT_DIR)/hw_layer/io_pins.cpp \
	$(PROJECT_DIR)/hw_layer/rtc_helper.cpp \
	$(PROJECT_DIR)/hw_layer/cdm_ion_sense.cpp \
	$(PROJECT_DIR)/hw_layer/backup_ram.cpp
	
ifeq ($(PROJECT_CPU),ARCH_STM32F7)
HW_LAYER_EMS += $(PROJECT_DIR)/hw_layer/ports/stm32/stm32f7/stm32f7xx_hal_flash.c \
				$(PROJECT_DIR)/hw_layer/ports/stm32/stm32f7/stm32f7xx_hal_flash_ex.c
endif

ifeq ($(PROJECT_CPU),ARCH_STM32F4)
HW_LAYER_EMS += $(PROJECT_DIR)/hw_layer/ports/stm32/stm32f4/stm32f4xx_hal_flash.c \
				$(PROJECT_DIR)/hw_layer/ports/stm32/stm32f4/stm32f4xx_hal_flash_ex.c
endif
	
ifeq ($(PROJECT_CPU),ARCH_STM32F1)
endif

-include $(PROJECT_DIR)/hw_layer/$(CPU_HWLAYER)/hw_ports.mk
auto-sync 2015-07-10 06:01:56 -07:00			`HW_LAYER_EGT = $(PROJECT_DIR)/hw_layer/serial_over_usb/usbcfg.c \`
			`$(PROJECT_DIR)/hw_layer/serial_over_usb/usbconsole.c`

			`HW_LAYER_EGT_CPP = $(PROJECT_DIR)/hw_layer/can_hw.cpp \`
			`$(PROJECT_DIR)/hw_layer/max31855.cpp`

			`HW_LAYER_EMS = $(HW_LAYER_EGT) \`
			`$(PROJECT_DIR)/hw_layer/mcp3208.c \`
STM32 Nucleo144-F767ZI board: Initial support (#620) * More EFI_ #ifdefs for config flexibility * Even more config flexibility * New firmware/config/stm32f7ems/* files * New firmware/config/boards/NUCLEO_F767/* files * New firmware/hw_layer/stm32f7/* files * Fix for EFI_USB_SERIAL * Adding #if defined(STM32F7XX) * SPI flags changed in F7: SPI_CR1_DFF --> SPI_CR1_CRCL * I2Cv2 config changed in F7 * More versatile CCM defines * Makefiles * Double #ifs cleanup * docs 2018-11-16 04:40:06 -08:00			`$(PROJECT_DIR)/hw_layer/flash.c`
auto-sync 2017-02-14 18:01:56 -08:00
auto-sync 2015-07-10 06:01:56 -07:00			`HW_LAYER_EMS_CPP = $(HW_LAYER_EGT_CPP) \`
			`$(PROJECT_DIR)/hw_layer/pin_repository.cpp \`
			`$(PROJECT_DIR)/hw_layer/microsecond_timer.cpp \`
			`$(PROJECT_DIR)/hw_layer/digital_input_hw.cpp \`
EXTI refactoring 2018-12-18 20:50:29 -08:00			`$(PROJECT_DIR)/hw_layer/digital_input_exti.cpp \`
auto-sync 2015-07-10 06:01:56 -07:00			`$(PROJECT_DIR)/hw_layer/hardware.cpp \`
steps towards smarter gpio 2019-04-13 07:58:52 -07:00			`$(PROJECT_DIR)/hw_layer/smart_gpio.cpp \`
auto-sync 2015-07-10 06:01:56 -07:00			`$(PROJECT_DIR)/hw_layer/neo6m.cpp \`
			`$(PROJECT_DIR)/hw_layer/mmc_card.cpp \`
			`$(PROJECT_DIR)/hw_layer/lcd/lcd_HD44780.cpp \`
			`$(PROJECT_DIR)/hw_layer/adc_inputs.cpp \`
			`$(PROJECT_DIR)/hw_layer/board_test.cpp \`
			`$(PROJECT_DIR)/hw_layer/pwm_generator.cpp \`
trigger input: add PAL support (#743) 2019-04-12 05:05:53 -07:00			`$(PROJECT_DIR)/hw_layer/trigger_input.cpp \`
unifying_file_naming 2019-03-29 06:11:13 -07:00			`$(PROJECT_DIR)/hw_layer/hip9011.cpp \`
MC33816 integraion #784 bare bones skeleton 2019-05-03 18:13:25 -07:00			`$(PROJECT_DIR)/hw_layer/mc33816.cpp \`
unifying_file_naming 2019-03-29 06:11:13 -07:00			`$(PROJECT_DIR)/hw_layer/hip9011_logic.cpp \`
auto-sync 2015-07-10 06:01:56 -07:00			`$(PROJECT_DIR)/hw_layer/vehicle_speed.cpp \`
			`$(PROJECT_DIR)/hw_layer/stepper.cpp \`
			`$(PROJECT_DIR)/hw_layer/servo.cpp \`
			`$(PROJECT_DIR)/hw_layer/io_pins.cpp \`
Backup NV-RAM refactor (#518) * Backup NV-RAM refactor * More comments on BACKUP_IGNITION_SWITCH_COUNTER 2017-12-22 05:49:03 -08:00			`$(PROJECT_DIR)/hw_layer/rtc_helper.cpp \`
ion sense progress 2018-12-31 13:00:41 -08:00			`$(PROJECT_DIR)/hw_layer/cdm_ion_sense.cpp \`
Backup NV-RAM refactor (#518) * Backup NV-RAM refactor * More comments on BACKUP_IGNITION_SWITCH_COUNTER 2017-12-22 05:49:03 -08:00			`$(PROJECT_DIR)/hw_layer/backup_ram.cpp`
STM32 Nucleo144-F767ZI board: Initial support (#620) * More EFI_ #ifdefs for config flexibility * Even more config flexibility * New firmware/config/stm32f7ems/* files * New firmware/config/boards/NUCLEO_F767/* files * New firmware/hw_layer/stm32f7/* files * Fix for EFI_USB_SERIAL * Adding #if defined(STM32F7XX) * SPI flags changed in F7: SPI_CR1_DFF --> SPI_CR1_CRCL * I2Cv2 config changed in F7 * More versatile CCM defines * Makefiles * Double #ifs cleanup * docs 2018-11-16 04:40:06 -08:00
reducing duplication removing unused (?) defines removing value space overlap between PROJECT_BOARD and PROJECT_CPU 2019-04-09 15:37:25 -07:00			`ifeq ($(PROJECT_CPU),ARCH_STM32F7)`
More compatibility for ADC_inputs, etc. (#716) * Move STM32-specific ADC pinouts to ports/stm32/stm32_common.cpp * Move STM32-specific files to ports/* * setAdcChannelOverrides() * Add #ifdefs for adc_inputs (PWM_FREQ_, PWM_PERIOD_, ADC__DEVICE) addChannel(), removeChannel() * fix tle6240 compilation * Add stm32_common.cpp to Makefile * More ports/stm32/* paths * More ports/stm32/* paths * More flexible GPIO ports * Add #ifdef for GPTDEVICE * EFI_BOARD_TEST and EFI_JOYSTICK * EFI_TLE8888 * Fix HIP9011_logic compilation * ADC_CHANNEL_SENSOR * Move ioportid_t PORTS[] to ports/* * Fix simulator 2019-03-28 19:46:10 -07:00			`HW_LAYER_EMS += $(PROJECT_DIR)/hw_layer/ports/stm32/stm32f7/stm32f7xx_hal_flash.c \`
			`$(PROJECT_DIR)/hw_layer/ports/stm32/stm32f7/stm32f7xx_hal_flash_ex.c`
reviving stm32f1 2018-12-26 19:17:51 -08:00			`endif`

reducing duplication removing unused (?) defines removing value space overlap between PROJECT_BOARD and PROJECT_CPU 2019-04-09 15:37:25 -07:00			`ifeq ($(PROJECT_CPU),ARCH_STM32F4)`
More compatibility for ADC_inputs, etc. (#716) * Move STM32-specific ADC pinouts to ports/stm32/stm32_common.cpp * Move STM32-specific files to ports/* * setAdcChannelOverrides() * Add #ifdefs for adc_inputs (PWM_FREQ_, PWM_PERIOD_, ADC__DEVICE) addChannel(), removeChannel() * fix tle6240 compilation * Add stm32_common.cpp to Makefile * More ports/stm32/* paths * More ports/stm32/* paths * More flexible GPIO ports * Add #ifdef for GPTDEVICE * EFI_BOARD_TEST and EFI_JOYSTICK * EFI_TLE8888 * Fix HIP9011_logic compilation * ADC_CHANNEL_SENSOR * Move ioportid_t PORTS[] to ports/* * Fix simulator 2019-03-28 19:46:10 -07:00			`HW_LAYER_EMS += $(PROJECT_DIR)/hw_layer/ports/stm32/stm32f4/stm32f4xx_hal_flash.c \`
			`$(PROJECT_DIR)/hw_layer/ports/stm32/stm32f4/stm32f4xx_hal_flash_ex.c`
STM32 Nucleo144-F767ZI board: Initial support (#620) * More EFI_ #ifdefs for config flexibility * Even more config flexibility * New firmware/config/stm32f7ems/* files * New firmware/config/boards/NUCLEO_F767/* files * New firmware/hw_layer/stm32f7/* files * Fix for EFI_USB_SERIAL * Adding #if defined(STM32F7XX) * SPI flags changed in F7: SPI_CR1_DFF --> SPI_CR1_CRCL * I2Cv2 config changed in F7 * More versatile CCM defines * Makefiles * Double #ifs cleanup * docs 2018-11-16 04:40:06 -08:00			`endif`
reviving stm32f1 2018-12-26 19:17:51 -08:00
reducing duplication removing unused (?) defines removing value space overlap between PROJECT_BOARD and PROJECT_CPU 2019-04-09 15:37:25 -07:00			`ifeq ($(PROJECT_CPU),ARCH_STM32F1)`
reviving stm32f1 2018-12-26 19:17:51 -08:00			`endif`
More portability & small fixes (#719) * Use hw_stm32.mk * Fix bootloader * Use more common hw_ports.mk filename instead of hw_stm32.mk * More CPU compatibility for Makefile * TS_UART_MODE & rename TS_SERIAL_UART_DEVICE->TS_SERIAL_DEVICE * Move lockAnyContext()/unlockAnyContext() to rfiutil.c * USE_FATFS * EFI_LCD * Less compilation errors * STATUS_LOGGING_BUFFER_SIZE & SETTINGS_LOGGING_BUFFER_SIZE * EFI_ALTERNATOR_CONTROL, EFI_SERVO, EFI_DISABLE_CONSOLE_ACTIONS * #ifndef PWM_PHASE_MAX_COUNT & more flexible GPIO inside portname() * merge * EFI_ALTERNATOR_CONTROL, EFI_ELECTRONIC_THROTTLE_BODY 2019-03-29 07:29:01 -07:00
			`-include $(PROJECT_DIR)/hw_layer/$(CPU_HWLAYER)/hw_ports.mk`
auto-sync 2015-07-10 06:01:56 -07:00