rusefi
/
rusefi-full
mirror of https://github.com/rusefi/rusefi-full.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
rusefi-full/firmware/config/boards/subaru_eg33/mcuconf.h

96 lines
2.4 KiB
C
Raw Normal View History

Add subaru eg33 (#2294) * engine: Subaru SVX EG33 engine configuration Not tested yet. Just basic settings and placeholder * board: add Dron_Gus's Subaru EG33 p'n'p board * board: subaru eg33: linker script: stack, bss and heap to ram0 * board: subaru eg33: add mapping.yaml * board: subaru eg33: scripts for autogenerated * board: subaru eg33: fix DMA conflict (ADC1 vs SPI5) * board: subaru eg33: enable ADC3 * board: subaru eg33: Autogenerated * board: subaru eg33: disable fsio control of Main Relay Default MAIN_RELAY_LOGIC cause error during parsing * board: subaru eg33: configuration hack to fix usbconsole.c * gen_config: generate config for Subaru SVX board too
2021-02-06 10:50:34 -08:00
/**
* @file boards/subarue-eg33/mcuconf.h
*
* @brief In this header we can override mcuconf.h.
*
* @date Feb 06, 2021
* @author Andrey Gusakov, 2021
*/
#ifndef _MCUCONF_SUBARUEG33_H_
#define _MCUCONF_SUBARUEG33_H_
Subaru build (#2376) * Subaru EG33: gen_config.sh update * gen_config and gen_enum_to_string for subaru_eg33 board too * Subaru eg33: add to buildables * Subaru: fix build * Subaru eg33: fix build and cleanup * subaru eg33: add compile script * github: subaru_eg33: call special gen_config.sh
2021-02-18 15:18:13 -08:00
#include "../../../hw_layer/ports/stm32/stm32f7/cfg/mcuconf.h"
Add subaru eg33 (#2294) * engine: Subaru SVX EG33 engine configuration Not tested yet. Just basic settings and placeholder * board: add Dron_Gus's Subaru EG33 p'n'p board * board: subaru eg33: linker script: stack, bss and heap to ram0 * board: subaru eg33: add mapping.yaml * board: subaru eg33: scripts for autogenerated * board: subaru eg33: fix DMA conflict (ADC1 vs SPI5) * board: subaru eg33: enable ADC3 * board: subaru eg33: Autogenerated * board: subaru eg33: disable fsio control of Main Relay Default MAIN_RELAY_LOGIC cause error during parsing * board: subaru eg33: configuration hack to fix usbconsole.c * gen_config: generate config for Subaru SVX board too
2021-02-06 10:50:34 -08:00
//#undef STM32_LSE_ENABLED
//#define STM32_LSE_ENABLED FALSE
#undef STM32_RTCSEL
#define STM32_RTCSEL STM32_RTCSEL_HSEDIV // STM32_RTCSEL_LSI
/* serials and uarts */
#undef STM32_SERIAL_USE_USART1
#undef STM32_UART_USE_USART1
#define STM32_SERIAL_USE_USART1 TRUE
#define STM32_UART_USE_USART1 FALSE
#undef STM32_SERIAL_USE_USART2
#undef STM32_UART_USE_USART2
Dedicated code path for USB console/TS (#2465) * new apis * dedicated USB path * move decl * init * don't init usb twice * guard * check that we're initialized before using TS * comment * guard * guard USB * brain doesn't go good * make tests happy * dead define * cypress * ifdef != if * s * include priority * don't start a thread we know we don't need * bad-ish merge * const * why did this code exist...? Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-18 11:07:22 -07:00
#define STM32_SERIAL_USE_USART2 FALSE
Add subaru eg33 (#2294) * engine: Subaru SVX EG33 engine configuration Not tested yet. Just basic settings and placeholder * board: add Dron_Gus's Subaru EG33 p'n'p board * board: subaru eg33: linker script: stack, bss and heap to ram0 * board: subaru eg33: add mapping.yaml * board: subaru eg33: scripts for autogenerated * board: subaru eg33: fix DMA conflict (ADC1 vs SPI5) * board: subaru eg33: enable ADC3 * board: subaru eg33: Autogenerated * board: subaru eg33: disable fsio control of Main Relay Default MAIN_RELAY_LOGIC cause error during parsing * board: subaru eg33: configuration hack to fix usbconsole.c * gen_config: generate config for Subaru SVX board too
2021-02-06 10:50:34 -08:00
#define STM32_UART_USE_USART2 FALSE
#undef STM32_SERIAL_USE_USART3
#undef STM32_UART_USE_USART3
#define STM32_SERIAL_USE_USART3 FALSE
#define STM32_UART_USE_USART3 FALSE
#undef STM32_UART_USE_USART3
#define STM32_UART_USE_USART3 FALSE
#undef STM32_UART_USE_UART4
#define STM32_UART_USE_UART4 FALSE
#undef STM32_USB_USE_OTG1
#define STM32_USB_USE_OTG1 TRUE
#undef STM32_USB_USE_USB1
#define STM32_USB_USE_USB1 TRUE
#undef STM32_I2C_USE_I2C1
#define STM32_I2C_USE_I2C1 FALSE
#undef STM32_SPI_USE_SPI2
#define STM32_SPI_USE_SPI2 FALSE
#undef STM32_SPI_USE_SPI4
#define STM32_SPI_USE_SPI4 TRUE
#undef STM32_SPI_USE_SPI5
#define STM32_SPI_USE_SPI5 TRUE
#undef STM32_ADC_USE_ADC3
#define STM32_ADC_USE_ADC3 TRUE
/* default STM32_DMA_STREAM_ID(2, 4) used by ADC1 */
#undef STM32_SPI_SPI5_TX_DMA_STREAM
#define STM32_SPI_SPI5_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 6)
Bunch of small fixes related to EG33 board (#3188) * Typo fix * flash_main: always allow to write settings to ext NOR while running * mc33810: do not enable outputs right after undervoltage Wait for next active signal * QSPI flash: set correct dummy cycles for fast read command * board subaru: fix connector pinout. again. * board subaru: fix SDMMC pin configuration * board subaru: fix DMA conflict SPI4_RX vs SDMMC2
2021-08-23 21:39:03 -07:00
/* STM32_DMA_STREAM_ID(2, 0) is used by SPI4_RX */
#undef STM32_SDC_SDMMC2_DMA_STREAM
#define STM32_SDC_SDMMC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
Add subaru eg33 (#2294) * engine: Subaru SVX EG33 engine configuration Not tested yet. Just basic settings and placeholder * board: add Dron_Gus's Subaru EG33 p'n'p board * board: subaru eg33: linker script: stack, bss and heap to ram0 * board: subaru eg33: add mapping.yaml * board: subaru eg33: scripts for autogenerated * board: subaru eg33: fix DMA conflict (ADC1 vs SPI5) * board: subaru eg33: enable ADC3 * board: subaru eg33: Autogenerated * board: subaru eg33: disable fsio control of Main Relay Default MAIN_RELAY_LOGIC cause error during parsing * board: subaru eg33: configuration hack to fix usbconsole.c * gen_config: generate config for Subaru SVX board too
2021-02-06 10:50:34 -08:00
/* To remove futher possible conflict */
#undef STM32_SPI_SPI6_RX_DMA_STREAM
#undef STM32_ICU_USE_TIM3
#define STM32_ICU_USE_TIM3 TRUE
#undef STM32_CAN_USE_CAN2
#define STM32_CAN_USE_CAN2 FALSE
//#undef STM32_CAN_CAN1_IRQ_PRIORITY
//#define STM32_CAN_CAN1_IRQ_PRIORITY 4
Settings ext storage (#3155) * flash_main.cpp: reorder code for easy integration of ext storage * Add EFI_STORAGE_INT_FLASH option Default set to TRUE * Add ChibiOS's Managed Flash Storage to build * Add support for QSPI flash (SST26F064A tested) * board: subaru: enable WSPI and NOR flash drivers * Add option to save settings on ext flash MFS partition * board: subaru: store settings on QSPI NOR flash
2021-08-14 06:36:08 -07:00
/*
* WSPI driver system settings.
*/
#define STM32_WSPI_USE_QUADSPI1 TRUE
#define STM32_WSPI_QUADSPI1_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
#define JEDEC_BUS_MODE JEDEC_BUS_MODE_WSPI4L
qspi flash updates (#3169) * ChibiOS QSPI updates * board: subaru: speed up NOR flash * QSPI: add fast read commands
2021-08-17 01:06:37 -07:00
/* QSPI is clocked from AHB clock, which is 216 MHz max
* Maximum CLK rate for SST26VF is 104/80MHz for Fast Read and
* Page program
* 216 / 3 = 72 MHz */
#define STM32_WSPI_QUADSPI1_PRESCALER_VALUE 3
Settings ext storage (#3155) * flash_main.cpp: reorder code for easy integration of ext storage * Add EFI_STORAGE_INT_FLASH option Default set to TRUE * Add ChibiOS's Managed Flash Storage to build * Add support for QSPI flash (SST26F064A tested) * board: subaru: enable WSPI and NOR flash drivers * Add option to save settings on ext flash MFS partition * board: subaru: store settings on QSPI NOR flash
2021-08-14 06:36:08 -07:00
Add subaru eg33 (#2294) * engine: Subaru SVX EG33 engine configuration Not tested yet. Just basic settings and placeholder * board: add Dron_Gus's Subaru EG33 p'n'p board * board: subaru eg33: linker script: stack, bss and heap to ram0 * board: subaru eg33: add mapping.yaml * board: subaru eg33: scripts for autogenerated * board: subaru eg33: fix DMA conflict (ADC1 vs SPI5) * board: subaru eg33: enable ADC3 * board: subaru eg33: Autogenerated * board: subaru eg33: disable fsio control of Main Relay Default MAIN_RELAY_LOGIC cause error during parsing * board: subaru eg33: configuration hack to fix usbconsole.c * gen_config: generate config for Subaru SVX board too
2021-02-06 10:50:34 -08:00
#endif /* _MCUCONF_SUBARUEG33_H_ */