rusefi
/
rusefi-full
mirror of https://github.com/rusefi/rusefi-full.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

ETB progress

This commit is contained in:
rusefi 2020-03-29 10:29:33 -04:00
parent 70f1ae9271
commit 0bb1f1f55f
10 changed files with 134 additions and 11 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
firmware/config/boards/kinetis/config/controllers/algo/engine_configuration_generated_structures.h
View File

@ -1,4 +1,4 @@
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration/rusefi_config.txt Sat Mar 28 21:08:55 EDT 2020
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration/rusefi_config.txt Sun Mar 29 10:29:07 EDT 2020
// by class com.rusefi.output.CHeaderConsumer
// begin
#ifndef CONFIG_BOARDS_KINETIS_CONFIG_CONTROLLERS_ALGO_ENGINE_CONFIGURATION_GENERATED_STRUCTURES_H
@ -560,6 +560,7 @@ struct engine_configuration_s {
offset 76 bit 11 */
bool cj125isLsu49 : 1;
/**
* TLE7209 uses two-wire mode. TLE9201 and VNH2SP30 do NOT use two wire mode.
offset 76 bit 12 */
bool etb_use_two_wires : 1;
/**
@ -3250,4 +3251,4 @@ typedef struct persistent_config_s persistent_config_s;
#endif
// end
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration/rusefi_config.txt Sat Mar 28 21:08:55 EDT 2020
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration/rusefi_config.txt Sun Mar 29 10:29:07 EDT 2020

5
firmware/controllers/generated/engine_configuration_generated_structures.h
View File

@ -1,4 +1,4 @@
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sat Mar 28 21:08:37 EDT 2020
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sun Mar 29 10:28:43 EDT 2020
// by class com.rusefi.output.CHeaderConsumer
// begin
#ifndef CONTROLLERS_GENERATED_ENGINE_CONFIGURATION_GENERATED_STRUCTURES_H
@ -560,6 +560,7 @@ struct engine_configuration_s {
offset 76 bit 11 */
bool cj125isLsu49 : 1;
/**
* TLE7209 uses two-wire mode. TLE9201 and VNH2SP30 do NOT use two wire mode.
offset 76 bit 12 */
bool etb_use_two_wires : 1;
/**
@ -3250,4 +3251,4 @@ typedef struct persistent_config_s persistent_config_s;
#endif
// end
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sat Mar 28 21:08:37 EDT 2020
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sun Mar 29 10:28:43 EDT 2020

2
firmware/integration/rusefi_config.txt
View File

@ -327,7 +327,7 @@ bit isVerboseAuxPid4;
bit unused76b9;
bit cj125isUaDivided;+Is your UA CJ125 output wired to MCU via resistor divider?
bit cj125isLsu49;
bit etb_use_two_wires;
bit etb_use_two_wires;+TLE7209 uses two-wire mode. TLE9201 and VNH2SP30 do NOT use two wire mode.
bit isDoubleSolenoidIdle;
bit showSdCardWarning;
bit cj125isUrDivided;+Is your UR CJ125 output wired to MCU via resistor divider?\nLooks like 3v range should be enough, divider generally not needed.

13
firmware/tunerstudio/rusefi.ini
View File

@ -86,7 +86,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sun Mar 29 09:00:21 EDT 2020
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sun Mar 29 10:28:43 EDT 2020
pageSize = 20000
page = 1
@ -1099,6 +1099,7 @@ page = 1
injector_flow = "This is your injector flow at the fuel pressure used in the vehicle. cc/min, cubic centimetre per minute\nBy the way, g/s = 0.125997881 * (lb/hr)\ng/s = 0.125997881 * (cc/min)/10.5\ng/s = 0.0119997981 * cc/min"
directSelfStimulation = "Should trigger emulator push data right into trigger handling logic, eliminating the need for physical jumper wires?\nSee also triggerSimulatorPins\nPS: Funny name, right? :)"
cj125isUaDivided = "Is your UA CJ125 output wired to MCU via resistor divider?"
etb_use_two_wires = "TLE7209 uses two-wire mode. TLE9201 and VNH2SP30 do NOT use two wire mode."
cj125isUrDivided = "Is your UR CJ125 output wired to MCU via resistor divider?\nLooks like 3v range should be enough, divider generally not needed."
absoluteFuelPressure = "If your fuel regulator does not have vacuum line"
tpsErrorDetectionTooLow = "TPS error detection, what TPS % value is unrealistically low"
@ -1514,6 +1515,16 @@ fileVersion = { 20200310 }
requiresPowerCycle = runningLedPin
requiresPowerCycle = binarySerialTxPin
requiresPowerCycle = binarySerialRxPin
requiresPowerCycle = idle_solenoidFrequency
requiresPowerCycle = boostPwmFrequency
requiresPowerCycle = alternatorPwmFrequency
requiresPowerCycle = auxPidFrequency1
requiresPowerCycle = auxPidFrequency2
requiresPowerCycle = auxPidFrequency3
requiresPowerCycle = auxPidFrequency4
requiresPowerCycle = etbFreq
requiresPowerCycle = fsioOutputPins1
requiresPowerCycle = fsioOutputPins2
requiresPowerCycle = fsioOutputPins3

10
firmware/tunerstudio/rusefi.input
View File

@ -377,6 +377,16 @@ fileVersion = { @@TS_FILE_VERSION@@ }
requiresPowerCycle = runningLedPin
requiresPowerCycle = binarySerialTxPin
requiresPowerCycle = binarySerialRxPin
requiresPowerCycle = idle_solenoidFrequency
requiresPowerCycle = boostPwmFrequency
requiresPowerCycle = alternatorPwmFrequency
requiresPowerCycle = auxPidFrequency1
requiresPowerCycle = auxPidFrequency2
requiresPowerCycle = auxPidFrequency3
requiresPowerCycle = auxPidFrequency4
requiresPowerCycle = etbFreq
requiresPowerCycle = fsioOutputPins1
requiresPowerCycle = fsioOutputPins2
requiresPowerCycle = fsioOutputPins3

13
firmware/tunerstudio/rusefi_frankenso.ini
View File

@ -86,7 +86,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sun Mar 29 09:00:27 EDT 2020
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sun Mar 29 10:28:53 EDT 2020
pageSize = 20000
page = 1
@ -1099,6 +1099,7 @@ page = 1
injector_flow = "This is your injector flow at the fuel pressure used in the vehicle. cc/min, cubic centimetre per minute\nBy the way, g/s = 0.125997881 * (lb/hr)\ng/s = 0.125997881 * (cc/min)/10.5\ng/s = 0.0119997981 * cc/min"
directSelfStimulation = "Should trigger emulator push data right into trigger handling logic, eliminating the need for physical jumper wires?\nSee also triggerSimulatorPins\nPS: Funny name, right? :)"
cj125isUaDivided = "Is your UA CJ125 output wired to MCU via resistor divider?"
etb_use_two_wires = "TLE7209 uses two-wire mode. TLE9201 and VNH2SP30 do NOT use two wire mode."
cj125isUrDivided = "Is your UR CJ125 output wired to MCU via resistor divider?\nLooks like 3v range should be enough, divider generally not needed."
absoluteFuelPressure = "If your fuel regulator does not have vacuum line"
tpsErrorDetectionTooLow = "TPS error detection, what TPS % value is unrealistically low"
@ -1514,6 +1515,16 @@ fileVersion = { 20200310 }
requiresPowerCycle = runningLedPin
requiresPowerCycle = binarySerialTxPin
requiresPowerCycle = binarySerialRxPin
requiresPowerCycle = idle_solenoidFrequency
requiresPowerCycle = boostPwmFrequency
requiresPowerCycle = alternatorPwmFrequency
requiresPowerCycle = auxPidFrequency1
requiresPowerCycle = auxPidFrequency2
requiresPowerCycle = auxPidFrequency3
requiresPowerCycle = auxPidFrequency4
requiresPowerCycle = etbFreq
requiresPowerCycle = fsioOutputPins1
requiresPowerCycle = fsioOutputPins2
requiresPowerCycle = fsioOutputPins3

58
firmware/tunerstudio/rusefi_kinetis.ini
View File

@ -66,6 +66,7 @@ enable2ndByteCanID = false
; we have current pageSize or (pageSize + 8) here?
;
crc32CheckCommand = "k\x00\x00\x00\x00\x36\xB8"
retrieveConfigError = "e"
;communication settings
pageActivationDelay = 500 ; Milliseconds delay after burn command. See https://sourceforge.net/p/rusefi/tickets/77/
@ -85,7 +86,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration/rusefi_config.txt Sat Mar 28 21:08:55 EDT 2020
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration/rusefi_config.txt Sun Mar 29 10:29:07 EDT 2020
pageSize = 20000
page = 1
@ -1098,6 +1099,7 @@ page = 1
injector_flow = "This is your injector flow at the fuel pressure used in the vehicle. cc/min, cubic centimetre per minute\nBy the way, g/s = 0.125997881 * (lb/hr)\ng/s = 0.125997881 * (cc/min)/10.5\ng/s = 0.0119997981 * cc/min"
directSelfStimulation = "Should trigger emulator push data right into trigger handling logic, eliminating the need for physical jumper wires?\nSee also triggerSimulatorPins\nPS: Funny name, right? :)"
cj125isUaDivided = "Is your UA CJ125 output wired to MCU via resistor divider?"
etb_use_two_wires = "TLE7209 uses two-wire mode. TLE9201 and VNH2SP30 do NOT use two wire mode."
cj125isUrDivided = "Is your UR CJ125 output wired to MCU via resistor divider?\nLooks like 3v range should be enough, divider generally not needed."
absoluteFuelPressure = "If your fuel regulator does not have vacuum line"
tpsErrorDetectionTooLow = "TPS error detection, what TPS % value is unrealistically low"
@ -1514,6 +1516,54 @@ fileVersion = { 20200310 }
requiresPowerCycle = binarySerialTxPin
requiresPowerCycle = binarySerialRxPin
requiresPowerCycle = idle_solenoidFrequency
requiresPowerCycle = boostPwmFrequency
requiresPowerCycle = alternatorPwmFrequency
requiresPowerCycle = auxPidFrequency1
requiresPowerCycle = auxPidFrequency2
requiresPowerCycle = auxPidFrequency3
requiresPowerCycle = auxPidFrequency4
requiresPowerCycle = etbFreq
requiresPowerCycle = fsioOutputPins1
requiresPowerCycle = fsioOutputPins2
requiresPowerCycle = fsioOutputPins3
requiresPowerCycle = fsioOutputPins4
requiresPowerCycle = fsioOutputPins5
requiresPowerCycle = fsioOutputPins6
requiresPowerCycle = fsioOutputPins7
requiresPowerCycle = fsioOutputPins8
requiresPowerCycle = fsioOutputPins9
requiresPowerCycle = fsioOutputPins10
requiresPowerCycle = fsioOutputPins11
requiresPowerCycle = fsioOutputPins12
requiresPowerCycle = fsioOutputPins13
requiresPowerCycle = fsioOutputPins14
requiresPowerCycle = fsioOutputPins15
requiresPowerCycle = fsioOutputPins16
requiresPowerCycle = fsioFrequency1
requiresPowerCycle = fsioFrequency2
requiresPowerCycle = fsioFrequency3
requiresPowerCycle = fsioFrequency4
requiresPowerCycle = fsioFrequency5
requiresPowerCycle = fsioFrequency6
requiresPowerCycle = fsioFrequency7
requiresPowerCycle = fsioFrequency8
requiresPowerCycle = fsioFrequency9
requiresPowerCycle = fsioFrequency10
requiresPowerCycle = fsioFrequency11
requiresPowerCycle = fsioFrequency12
requiresPowerCycle = fsioFrequency13
requiresPowerCycle = fsioFrequency14
requiresPowerCycle = fsioFrequency15
requiresPowerCycle = fsioFrequency16
requiresPowerCycle = fsioAdc1
requiresPowerCycle = fsioAdc2
requiresPowerCycle = fsioAdc3
requiresPowerCycle = fsioAdc4
readOnly = critical_error_message
@ -2076,6 +2126,10 @@ gaugeCategory = Throttle Body (incl. ETB)
indicator = { ind_injection_enabled}, "no injection", "injection", red, black, green, black
indicator = { ind_isTriggerError}, "ok", "trg err", green, black, red, black
; this is required so that the "config error" feature works in TS
; don't change this line - TS is looking for an indicator with particular text/styling
; you don't even have to show it by default
indicator = { ind_hasFatalError }, "Config Error", "Config Error", white, black, red, black
; minor info
indicator = { ind_fan}, "no fan", "fan", white, black, green, black
@ -3633,7 +3687,9 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
panel = fsioSetting, East
dialog = fsioFormulas, "FSIO Formulas"
field = "https://rusefi.com/s/fsio"
field = "!FSIO uses Reverse Polish Notation. Please read http://rusefi.com/s/fsio"
field = "#fsioinfo command in rusEfi console could be useful while troubleshooting those"
field = "#1", fsioFormulas1
field = "#2", fsioFormulas2
field = "#3", fsioFormulas3

13
firmware/tunerstudio/rusefi_microrusefi.ini
View File

@ -86,7 +86,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sun Mar 29 09:00:24 EDT 2020
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sun Mar 29 10:28:48 EDT 2020
pageSize = 20000
page = 1
@ -1099,6 +1099,7 @@ page = 1
injector_flow = "This is your injector flow at the fuel pressure used in the vehicle. cc/min, cubic centimetre per minute\nBy the way, g/s = 0.125997881 * (lb/hr)\ng/s = 0.125997881 * (cc/min)/10.5\ng/s = 0.0119997981 * cc/min"
directSelfStimulation = "Should trigger emulator push data right into trigger handling logic, eliminating the need for physical jumper wires?\nSee also triggerSimulatorPins\nPS: Funny name, right? :)"
cj125isUaDivided = "Is your UA CJ125 output wired to MCU via resistor divider?"
etb_use_two_wires = "TLE7209 uses two-wire mode. TLE9201 and VNH2SP30 do NOT use two wire mode."
cj125isUrDivided = "Is your UR CJ125 output wired to MCU via resistor divider?\nLooks like 3v range should be enough, divider generally not needed."
absoluteFuelPressure = "If your fuel regulator does not have vacuum line"
tpsErrorDetectionTooLow = "TPS error detection, what TPS % value is unrealistically low"
@ -1514,6 +1515,16 @@ fileVersion = { 20200310 }
requiresPowerCycle = runningLedPin
requiresPowerCycle = binarySerialTxPin
requiresPowerCycle = binarySerialRxPin
requiresPowerCycle = idle_solenoidFrequency
requiresPowerCycle = boostPwmFrequency
requiresPowerCycle = alternatorPwmFrequency
requiresPowerCycle = auxPidFrequency1
requiresPowerCycle = auxPidFrequency2
requiresPowerCycle = auxPidFrequency3
requiresPowerCycle = auxPidFrequency4
requiresPowerCycle = etbFreq
requiresPowerCycle = fsioOutputPins1
requiresPowerCycle = fsioOutputPins2
requiresPowerCycle = fsioOutputPins3

13
firmware/tunerstudio/rusefi_prometheus.ini
View File

@ -86,7 +86,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sun Mar 29 09:00:30 EDT 2020
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sun Mar 29 10:28:58 EDT 2020
pageSize = 20000
page = 1
@ -1099,6 +1099,7 @@ page = 1
injector_flow = "This is your injector flow at the fuel pressure used in the vehicle. cc/min, cubic centimetre per minute\nBy the way, g/s = 0.125997881 * (lb/hr)\ng/s = 0.125997881 * (cc/min)/10.5\ng/s = 0.0119997981 * cc/min"
directSelfStimulation = "Should trigger emulator push data right into trigger handling logic, eliminating the need for physical jumper wires?\nSee also triggerSimulatorPins\nPS: Funny name, right? :)"
cj125isUaDivided = "Is your UA CJ125 output wired to MCU via resistor divider?"
etb_use_two_wires = "TLE7209 uses two-wire mode. TLE9201 and VNH2SP30 do NOT use two wire mode."
cj125isUrDivided = "Is your UR CJ125 output wired to MCU via resistor divider?\nLooks like 3v range should be enough, divider generally not needed."
absoluteFuelPressure = "If your fuel regulator does not have vacuum line"
tpsErrorDetectionTooLow = "TPS error detection, what TPS % value is unrealistically low"
@ -1514,6 +1515,16 @@ fileVersion = { 20200310 }
requiresPowerCycle = runningLedPin
requiresPowerCycle = binarySerialTxPin
requiresPowerCycle = binarySerialRxPin
requiresPowerCycle = idle_solenoidFrequency
requiresPowerCycle = boostPwmFrequency
requiresPowerCycle = alternatorPwmFrequency
requiresPowerCycle = auxPidFrequency1
requiresPowerCycle = auxPidFrequency2
requiresPowerCycle = auxPidFrequency3
requiresPowerCycle = auxPidFrequency4
requiresPowerCycle = etbFreq
requiresPowerCycle = fsioOutputPins1
requiresPowerCycle = fsioOutputPins2
requiresPowerCycle = fsioOutputPins3

13
firmware/tunerstudio/rusefi_proteus.ini
View File

@ -86,7 +86,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sun Mar 29 09:00:34 EDT 2020
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sun Mar 29 10:29:02 EDT 2020
pageSize = 20000
page = 1
@ -1099,6 +1099,7 @@ page = 1
injector_flow = "This is your injector flow at the fuel pressure used in the vehicle. cc/min, cubic centimetre per minute\nBy the way, g/s = 0.125997881 * (lb/hr)\ng/s = 0.125997881 * (cc/min)/10.5\ng/s = 0.0119997981 * cc/min"
directSelfStimulation = "Should trigger emulator push data right into trigger handling logic, eliminating the need for physical jumper wires?\nSee also triggerSimulatorPins\nPS: Funny name, right? :)"
cj125isUaDivided = "Is your UA CJ125 output wired to MCU via resistor divider?"
etb_use_two_wires = "TLE7209 uses two-wire mode. TLE9201 and VNH2SP30 do NOT use two wire mode."
cj125isUrDivided = "Is your UR CJ125 output wired to MCU via resistor divider?\nLooks like 3v range should be enough, divider generally not needed."
absoluteFuelPressure = "If your fuel regulator does not have vacuum line"
tpsErrorDetectionTooLow = "TPS error detection, what TPS % value is unrealistically low"
@ -1514,6 +1515,16 @@ fileVersion = { 20200310 }
requiresPowerCycle = runningLedPin
requiresPowerCycle = binarySerialTxPin
requiresPowerCycle = binarySerialRxPin
requiresPowerCycle = idle_solenoidFrequency
requiresPowerCycle = boostPwmFrequency
requiresPowerCycle = alternatorPwmFrequency
requiresPowerCycle = auxPidFrequency1
requiresPowerCycle = auxPidFrequency2
requiresPowerCycle = auxPidFrequency3
requiresPowerCycle = auxPidFrequency4
requiresPowerCycle = etbFreq
requiresPowerCycle = fsioOutputPins1
requiresPowerCycle = fsioOutputPins2
requiresPowerCycle = fsioOutputPins3