From 11b5ce82d0b24581df446170915d62c2f05c2e97 Mon Sep 17 00:00:00 2001 From: rusefi Date: Sat, 17 Nov 2018 13:21:58 -0500 Subject: [PATCH] sync --- hardware/CJ125_board/known_issues.txt | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/hardware/CJ125_board/known_issues.txt b/hardware/CJ125_board/known_issues.txt index ad601259aa..529394a5be 100644 --- a/hardware/CJ125_board/known_issues.txt +++ b/hardware/CJ125_board/known_issues.txt @@ -12,4 +12,6 @@ 12) RESOLVED IN R0.3 power ON status LED, heater intensity LED 13) RESOLVED IN R0.4 Change solder mask, from 0.007874015748 to 0.003. 14) RESOLVED IN R0.4.1 Change LSU4.9 to 301 ohms, as noted here https://rusefi.com/forum/viewtopic.php?f=4&t=1052&start=143 -15) RESOLVED IN R0.4.1 Change Rfb1 and Rfb2 should be increased to 5.11k and 511k as noted here https://rusefi.com/forum/viewtopic.php?f=4&t=1052&start=143 \ No newline at end of file +15) RESOLVED IN R0.4.1 Change Rfb1 and Rfb2 should be increased to 5.11k and 511k as noted here https://rusefi.com/forum/viewtopic.php?f=4&t=1052&start=143 +16) Sepeate the signald GND and the power GND for a better design +17) and the GND ring around pin 22 CF for better RF rejection. \ No newline at end of file